Follow-up of Pregnant Women With Autoimmune Hepatitis The Disease Behavior Along With Maternal and Fetal Outcomes

Goals: To assess maternal and fetal outcomes and clinical management of pregnancy in patients with autoimmune hepatitis (AIH). Background: There is a paucity of information about maternal and fetal outcomes, and AIH activity during pregnancy and in the postpartum period. There is no consensus about the administration of azathioprine during pregnancy and breastfeeding. Study: Retrospective analysis of 54 pregnancies (3 still in progress) in 39 AIH patients. Results: The median age at conception was 24 years, and 68.4% of women had liver cirrhosis. Before conception and in early pregnancy, azathioprine and prednisone were administered in 48.1%, but treatment regimen vas usually changed further to 20 mg/d prednisone and 20.4%, were off treatment. There were 36 livebirths, and fetal loss rates were 29.4% (13 miscarriages, 1 stillbirth, and 1 ectopic pregnancy). Preterm birth rate was 11.8%. In 2 cases, there was acute fetal distress; and in 2 others congenital malformations (3.9%). The rate of serious maternal complication was 7.8%, with no deaths. There were no flares in 41.2% pregnancies, but aminotransferase elevations occurred in 54.9%, 31.4% of which were true AIH relapses, only registered in the postpartum period. Conclusions: Despite the high fetal miscarriage rate, pregnancy in AIH was safe. Patients needed careful monitoring, especially in the postpartum period because of relapses. There was no evidence of a cause and effect relationship among azathioprine administration and premature births and congenital abnormalities, but more studies are necessary. Higher doses of prednisone may be an alternative option for those who prefer azathioprine withdrawal during pregnancy.

The behavior modification school follow-up study. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Application Behavior as a Consequential Juncture in the Take-Up of Postsecondary Education

Thesis (Ph.D.)--University of Washington, 2016-06

Enclosing the behavior of a hybrid system up to and beyond a Zeno point

Even simple hybrid systems like the classic bouncing ball can exhibit Zeno behaviors. The existence of this type of behavior has so far forced simulators to either ignore some events or risk looping indefinitely. This in turn forces modelers to either insert ad hoc restrictions to circumvent Zeno behavior or to abandon hybrid modeling. To address this problem, we take a fresh look at event detection and localization. A key insight that emerges from this investigation is that an enclosure for a given time interval can be valid independently of the occurrence of a given event. Such an event can then even occur an unbounded number of times, thus making it possible to handle certain types of Zeno behavior.

Enclosing the behavior of a hybrid automaton up to and beyond a Zeno point

Even simple hybrid automata like the classic bouncing ball can exhibit Zeno behavior. The existence of this type of behavior has so far forced a large class of simulators to either ignore some events or risk looping indefinitely. This in turn forces modelers to either insert ad-hoc restrictions to circumvent Zeno behavior or to abandon hybrid automata. To address this problem, we take a fresh look at event detection and localization. A key insight that emerges from this investigation is that an enclosure for a given time interval can be valid independent of the occurrence of a given event. Such an event can then even occur an unbounded number of times. This insight makes it possible to handle some types of Zeno behavior. If the post-Zeno state is defined explicitly in the given model of the hybrid automaton, the computed enclosure covers the corresponding trajectory that starts from the Zeno point through a restarted evolution.

A magyar hallgatók vállalkozásindító szándékát befolyásoló tényezők modellje - Ajzen tervezett magatartás elméletének kiterjesztése (Model of the Hungarian students’ business start-up intention influencing factors – Extending of Ajzen’s Theory of Planned Behavior)

A vállalkozási tevékenység a munkahelyteremtés és a gazdasági növekedés egyik döntő tényezője. Ennek a jövőbeli kedvező alakulását a fiatalok mai attitűdjei határozzák meg. Ha be tudjuk azonosítani a legfontosabb tényezőket, amelyek a fiatalok vállalkozásindítási szándékát befolyásolják, el tudjuk dönteni azt is, mely területen lehet és érdemes beavatkozni annak érdekében, hogy minél több új, életképes vállalkozás szülessen. A cikk a GUESSS kutatási projekt magyarországi adatbázisának köszönhetően közel 6000 hallgató válaszait elemezve rendszerezi a felsőoktatásban résztvevők vállalkozásindítási szándékára ható legfontosabb tényezőcsoportokat. Első lépésben Ajzen tervezett magatartás elméletének alkalmazásával vizsgálja a vállalkozásindítási szándék alakítóit, majd további tényezők, így a felsőoktatási intézmények által nyújtott szolgáltatások, a családi háttér és a demográfiai jellemzők bevonásával igyekszik minél pontosabban leírni a szándék alakulását. _____ Entrepreneurial activity is a decisive factor in the dynamics of job creation and economic growth. The future level of this activity highly depends on the attitudes of today’s youth towards this. If the most important factors influencing attitudes are identified and the entrepreneurial intentions towards entrepreneurship are determined, the fields of intervention targeting the creation of as many new and viable enterprises as possible can be defined. This article aims to systematise the most important factor groups that influence the decisions of students studying in higher education in terms of start-up activities and is based on the Hungarian database of the GUESSS research project, containing almost 6000 respondents. Firstly, it tests Ajzen’s Theory of Planned Behavior. Then such factors as supportive services provided by higher education institutions, family background and demographic factors are analysed in order to improve the explanatory power of the model.

Growing up in a bubble: using germ-free animals to assess the influence of the gut microbiota on brain and behavior

There is a growing recognition of the importance of the commensal intestinal microbiota in the development and later function of the central nervous system. Research using germ-free mice (mice raised without any exposure to microorganisms) has provided some of the most persuasive evidence for a role of these bacteria in gut-brain signalling. Key findings show that the microbiota is necessary for normal stress responsivity, anxiety-like behaviors, sociability, and cognition. Furthermore, the microbiota maintains central nervous system homeostasis by regulating immune function and blood brain barrier integrity. Studies have also found that the gut microbiota influences neurotransmitter, synaptic, and neurotrophic signalling systems and neurogenesis. The principle advantage of the germ-free mouse model is in proof-of-principle studies and that a complete microbiota or defined consortiums of bacteria can be introduced at various developmental time points. However, a germ-free upbringing can induce permanent neurodevelopmental deficits that may deem the model unsuitable for specific scientific queries that do not involve early-life microbial deficiency. As such, alternatives and complementary strategies to the germ-free model are warranted and include antibiotic treatment to create microbiota-deficient animals at distinct time points across the lifespan. Increasing our understanding of the impact of the gut microbiota on brain and behavior has the potential to inform novel management strategies for stress-related gastrointestinal and neuropsychiatric disorders.

Beliefs Related To Adherence To Oral Antidiabetic Treatment According To The Theory Of Planned Behavior.

to identify salient behavioral, normative, control and self-efficacy beliefs related to the behavior of adherence to oral antidiabetic agents, using the Theory of Planned Behavior. cross-sectional, exploratory study with 17 diabetic patients in chronic use of oral antidiabetic medication and in outpatient follow-up. Individual interviews were recorded, transcribed and content-analyzed using pre-established categories. behavioral beliefs concerning advantages and disadvantages of adhering to medication emerged, such as the possibility of avoiding complications from diabetes, preventing or delaying the use of insulin, and a perception of side effects. The children of patients and physicians are seen as important social references who influence medication adherence. The factors that facilitate adherence include access to free-of-cost medication and taking medications associated with temporal markers. On the other hand, a complex therapeutic regimen was considered a factor that hinders adherence. Understanding how to use medication and forgetfulness impact the perception of patients regarding their ability to adhere to oral antidiabetic agents. medication adherence is a complex behavior permeated by behavioral, normative, control and self-efficacy beliefs that should be taken into account when assessing determinants of behavior.

Unusual 1,6-diphenyl-1,3,5-hexatriene (DPH) spectrophotometric behavior in water/ethanol and water/DMSO mixtures

The absorption spectra of DPH at fixed concentration do not change with water content in organic solvents. It exhibits monomer bands, such as those obtained in ethanol. The absorption did not change for solutions up to 54 and 46% of water in ethanol and DMSO, respectively, for [DPH] = 5.0 × 10-6 mol L-1 at 30 °C. However, at the same experimental conditions, a gradual sharp decay of the DPH fluorescence is observed. It is proposed that water molecules below these water concentration limits act as quenchers of the excited states of DPH. Stern-Volmer quenching constants by intensities measurements are 7.4 × 10-2 (water/ethanol) and 2.6 × 10-2 L mol-1 (water/DMSO). DPH lifetime measurements in the absence and presence of water resulted in 7.1 × 10-2 L mol-1 in water/ethanol, which pointed out that the process is a dynamic quenching by water molecules. For experiments using DPH as probe, this process can affect data, leading to misunderstanding interpretation.

Sequential hygienic behavior in Carniolan honey bees (Apis mellifera carnica)

We examined the sequence, order or steps of hygienic behavior (HB) from pin-killed pupae until the removal of them by the bees. We conducted our study with four colonies of Apis mellifera carnica in Germany and made four repetitions. The pin-killing method was used for evaluation of the HB of bees. The data were collected every 2 h after perforation, totaling 13 observations. Additionally, for one hygienic colony and another non-hygienic colony, individual analyses of each dead pupa were made at every observation, including all details, steps or sequences of HB. The bees recognize the cells containing dead pupae within 2 h after perforation, initially making a hole in the capping, which is the beginning of HB. Uncapping of the dead brood cell reached maximum values from 4 to 6 h after perforation; after 24 h, practically all cells were already uncapped. Another variable, called brood partially removed, was analyzed 4 h after perforation, after the cells had been perforated, which involved uncapping, followed by partial or total removal of the brood. Maximum values of brood partially removed were found 10 h after perforation, though such cells could be found up to 48 h after perforation. The most frequent sequence of events in both colonies was: capped cell -> punctured cell. brood partially removed -> empty cell. A new model of three pairs of recessive genes (uncapping u1, u2 and remover r) was proposed in order to explain the genetic control of the HB in Apis mellifera. We recommend evaluating HB 24 h after perforation and using a correction factor to compensate for control removal levels. We found a series of details of HB, which allow a study of how various factors may affect the sequence of the activities involved in HB and investigation of the genetics that controls this process.

Rheological behavior of mortars under different squeezing rates

In the present work the squeeze flow technique was used to evaluate the rheological behavior of cement-based mortars containing macroscopic aggregates up to 1.2 mm. Compositions with different water and air contents were tested at three squeezing rates (0.01, 0.1 and 1 mm/s) 15 and 60 min after mixing. The mortars prepared with low (13 wt.%) and usual water content (15 wt.%) presented opposite behaviors as a function of elapsed time and squeezing speed. The first lost its cohesion with time and required higher loads when squeezed faster, while the latter became stiffer with time and was more difficult to be squeezed slowly as a result of phase segregation. Due to the increase of air content, the effects of this compressible phase became more significant and a more complex behavior was observed. Rheological properties such as elongational viscosity and yield stress were also determined. (C) 2009 Elsevier Ltd. All rights reserved.

Embrittlement of electrical steel laminations by nitrogen pick-up during heat treatment

Heat treated electrical steel laminations have shown evidence of low ductility behavior, characterized by a small number of bends till fracture, on repeated bending tests. The laminations were produced using a new grade of electrical steel with much lower aluminum content than usual. The problem happens when the oxygen potential (measured by the dew point of the atmosphere) of the heat treatment atmosphere is abnormally high. Furthermore, ductility can be restored by a low-oxygen potential heat treatment. Although the heat treatment resulted in a loss of ductility, the magnetic properties were not deteriorated. The low ductility samples always show intergranular fracture, whereas the un-treated laminations fracture by cleavage. The low ductility is associated with the formation of silicon manganese nitride precipitates formed at grain boundaries, although they are not the cause of the low ductility. Ductility could be restored by a low dew point heat treatment but the inclusions remained in the grain boundaries. The low ductility and its recovery must be ascribed to the presence of nitrogen atoms segregated to the grain boundaries when the heat treatment atmosphere has a high oxygen potential. The lack of aluminum in the composition of the steel hinders the scavenging effect of this element on nitrogen atoms in solution in the steel. (C) 2009 Elsevier Ltd. All rights reserved.

Stress relaxation behavior of PMMA/PS polymer blends

In this work, the stress relaxation behavior of PMMA/PS blends, with or without random copolymer addition, submitted to step shear strain experiments in the linear and nonlinear regime was studied. The effect of blend composition (ranging from 10 to 30 wt.% of dispersed phase), viscosity ratio (ranging from 0.1 to 7.5), and random copolymer addition (for concentrations up to 8 wt.% with respect to the dispersed phase) was evaluated and correlated to the evolution of the morphology of the blends. All blends presented three relaxation stages: a first fast relaxation which was attributed to the relaxation of the pure phases, a second one which was characterized by the presence of a plateau, and a third fast one. The relaxation was shown to be faster for less extended and smaller droplets and to be influenced by coalescence for blends with a dispersed phase concentration larger than 20 wt.%. The relaxation of the blend was strongly influenced by the matrix viscosity. The addition of random copolymer resulted in a slower relaxation of the droplets.

Photooxidative behavior of polystyrene-montmorillonite nanocomposites

The weathering behavior of polystyrene and polystyrene-montmorillonite composites containing 2.5, 5.0, and 7.5 wt% of montmorillonite (MMT) was investigated. Samples were exposed to UV radiation for periods of up to similar to 12 weeks and their molecular weight, chemical changes, and mechanical properties were monitored as a function of time. The addition of MMT was shown to improve the photostability of all composites investigated, probably because of a screen effect against UV radiation and barrier effect against diffusion of oxygen promoted by the silicate layers of MMT. Scanning electron microscopy of fracture surfaces of degraded samples showed that there is a degraded layer near the surface that provided a recovery of tensile strength of the samples.

Diversity and Emotion: The New Frontiers in Organizational Behavior Research

This article provides a review of recent developments in two topical areas of research in contemporary organizational behavior: diversity and emotions. In the section called “Diversity,”we trace the history of diversity research, explore the definitions and paradigms used in treatments of diversity, and signal new areas of interest. We conclude that organizational behavior in the 21st century is evolving to embrace a more eclectic and holistic view of humans at work. In the section called “Emotions,” we turn our attention to recent developments in the study of emotions in organizations. We identify four major topics: mood theory, emotional labor, affective events theory (AET), and emotional intelligence, and argue that developments in the four domains have significant implications for organizational research, and the progression of the study of organizational behavior. As with the study of diversity, the topic of emotions in the workplace is shaping up as one of the principal areas of development in management thought and practice for the next decade. Finally, we discuss in our conclusion how these two areas are being conceptually integrated, and the implications for management scholarship and research in the contemporary world.