Solvent extraction of Am(III) and Eu(III) from nitrate solution using synergistic mixtures of n-tridentate heterocycles and chlorinated cobalt dicarbollide

The separation by solvent extraction of Am-241(III) from Eu-152(III), in 1 M NaNO3 weakly acidic (pH 4) aqueous solutions, into dilute (ca. 10(-2) M) solutions of triazinylbipyridine derivatives (diethylhemi-BTP or di(benzyloxyphenyl) hemi-BTP) and chlorinated cobalt dicarbollide (COSAN) in 1-octanol or nitrobenzene has been studied. The N-tridentate heterocyclic ligands, which are selective for Am(III) over Eu(III), secured efficient separation of the two metal ions, while COSAN, strongly hydrophobic and fully dissociated in polar diluents, enhanced the extraction of the metal ions by ion-pair formation. Molecular interactions between the two co-extractants, observed at higher concentrations, led to the precipitation of their 1: 1 molecular adduct. In spite of that, efficient separations of Am and Eu ions were attained, with high separation factors, SFAm/Eu of 40 and even 60, provided the concentration of hemi-BTP was significantly greater than that of COSAN. Excess COSAN concentrations caused an antagonistic effect, decreasing both the distribution ratio of the metal ions and their separation factor.

Synthesis of linked heterocycles via use of bis-acetylenic compounds

Linked bis-pyrazoles, a pyrazolyl-isoxazole, a pyrazolyl-pyrimidine and a pyrazolyl-triazole were synthesized starting with commercially available 1,4-bis(trimethylsilyl)-1,3-butadiyne 1 or readily available bis-acetylenic diketone 22. A stepwise approach based on the use of 1 allowed the synthesis of nonsymmetrically substituted bis-pyrazoles and linked heterocycles with two different cores whereas a symmetric approach based on the use of 22 allowed a very short synthesis of symmetric bis-pyrazoles.

Physico-chemical parameter correlations in the [RuCl2(CO)(L)(PPh3)2] complexes (L = N-heterocycles)

Fourteen complexes in the series [RuCl2(CO)(L)(PPh3)2] (where L = N-heterocycles) have been prepared and characterized by IR and NMR spectroscopies, and cyclic voltammetry. A good correlation is found between observed and calculated electrochemical potentials; E1/2 vs pKa or (Gp, σm for a series of similar ligands. It is now reported that the carbonyl stretching frequency, νCO, and the 13C and 31P NMR signals do not correlate well with any of the physico-chemical parameters used (E1/2, Taft's and Hammett's parameters). This behaviour is probably due to the characteristics of the Ru(II) species, which does not transmit the steric and electron donor/acceptor properties of the ligands to the carbonyl group, or because the measurements are not able to detect the effect induced by the changes in the ligand L. Indeed, good correlations are obtained when the measurements directly involve the metal centre, as is the case in the E1/2 measurements. Crystals of o[RuCl2(CO)(4-pic)(PPh3)2] are monoclinic, space group P21/n, a = 12.019(2), b = 13.825(3) and c = 22.253(3) . The structure was solved by the Patterson method and was refined by full-matrix least-squares procedure to R = 0.054 and Rw = 0.055, for 2114 reflections with I > 3σ(I). For L = 2-acetylpyridine and 2-methylimidazole, complexes with formulae [RuCl2(CO)(L)(PPh3)] · L and [RuCl2(CO)(L)2 (PPh3)], respectively, were obtained. © 1998 Elsevier Science Ltd. All rights reserved.

Stereoselective synthesis of heterocycles as intermediates of biologically active compounds

The aim of this thesis was to investigate the synthesis of enantiomerically enriched heterocycles and dehydro-β-amino acid derivatives which can be used as scaffolds or intermediates of biologically active compounds, in particular as novel αvβ3 and α5β1 integrin ligands. The starting materials of all the compounds here synthesized are alkylideneacetoacetates. Alkylidene derivates are very usefull compounds, they are usually used as unsaturated electrophiles and they have the advantage of introducing different kind of functionality that may be further elaborated. In chapter 1, regio- and stereoselective allylic amination of pure carbonates is presented. The reaction proceeds via uncatalyzed or palladium-catalyzed conditions and affords enantiopure dehydro-β-amino esters that are useful precursor of biologically active compounds. Chapter 2 illustrates the synthesis of substituted isoxazolidines and isoxazolines via Michael addition followed by intramolecular hemiketalisation. The investigation on the effect of the Lewis acid catalysis on the regioselectivity of the addition it also reported. Isoxazolidines and isoxazolines are interesting heterocyclic compounds that may be regarded as unusual constrained -amino acids or as furanose mimetics. The synthesis of unusual cyclic amino acids precursors, that may be envisaged as proline analogues, as scaffolds for the design of bioactive peptidomimetics is presented in chapter 3. The synthesis of 2-substituted-3,4-dehydropyrrole derivatives starting from allylic carbonates via a two step allylic amination/ring closing metathesis (RCM) protocol is carried out. The reaction was optimized by testing different Grubbs’ catalysts and carbamate nitrogen protecting groups. Moreover, in view of a future application of these dehydro-β-amino acids as central core of peptidomimetics , the malonate chain was also used to protect nitrogen prior to RCM. Finally, chapter 4 presents the synthesis of two novel different classes of integrin antagonists, one derived from dehydro-β-amino acid prepared as described in chapter 1 and the other one has isoxazolidines synthesized in chapter 2 as rigid constrained core. Since that these compounds are promising RGD mimetics for αvβ3 and α5β1 integrins, they have been submitted to biological assay. and to interpret on a molecular basis their different affinities for the αvβ3 receptor, docking studies were performed using Glide program.

Organocatalytic tandem reactions of polyfunctional compounds for the synthesis of enantioenriched heterocycles. Reazioni tandem organocatalitiche di composti polifunzionali per la sintesi di eterocicli enantioarricchiti.

In questo lavoro di tesi sono state sviluppate reazioni domino, tandem e procedure one-pot per ottenere eterocicli enatioarricchiti. Lo sviluppo di queste metodologie sintetiche è molto importante perché permettono di ottenere molecole complesse partendo da prodotti semplici, senza effettuare ripetuti passaggi di purificazione (stop-and-go or step-by-step synthesis). Lo scopo di questo lavoro è di ottenere derivati tetraidrofuranici modificati e derivati ossoazzolinici enantioarrichiti tramite reazioni SN2-Michael o tramite reazioni aldolica-ciclizzazione-Michael usando la catalisi asimmetrica a trasferimento di fase (PTC). Come catalizzatori PTC per imprimere enantioselezione sono stati utilizzati sali di ammonio quaternario derivati dagli alcaloidi della Cinchona. Sono state ottimizzate le condizioni di reazione (base inorganica, temperatura, solvente, tempo di reazione) per i diversi substrati presi in considerazione. I prodotti target sono stati ottenuti con buone rese, ottime diastereoselezioni ma con bassa enantioselezione. I risultati ottenuti richiedono un’ulteriore ottimizzazione e dovranno essere valutate variazioni strutturali dei nucleofili utilizzati. In this thesis were developed domino, tandem reactions and one-pot procedures to obtained enantioenriched heterocycles. The development of these methodologies is very fundamental because they allow to obtain complex molecules starting from raw materials, without carrying out repeated purification steps (stop-and-go or step-by-step synthesis). The purpose of this work is to obtain enantioenriched tetrahydrofuran and oxazoline derivatives through a SN2-Michael reaction or a aldol- cyclization-Michael reaction using the phase-transfer asymmetric catalysis (PTC). For imprint enantioselection we used Cinchona alkaloids quaternary ammonium salts derivatives. The reaction conditions (inorganic base, temperature, solvent, reaction time) were optimised for the different substrates taken into account. The target products were obtained with good yields, excellent diastereoselections but with low enantioselections. The obtained results require further optimization and structural changes in the nucleophiles used must be evaluated.

Synthesis of Nitrogenated Heterocycles by Asymmetric Transfer Hydrogenation of N-(tert-Butylsulfinyl)haloimines

Highly optically enriched, protected, nitrogenated heterocycles with different ring sizes have been synthesized by a very efficient methodology consisting of the asymmetric transfer hydrogenation of N-(tert-butylsulfinyl)haloimines followed by treatment with a base to promote an intramolecular nucleophilic substitution process. N-Protected aziridines, pyrrolidines, piperidines, and azepanes bearing aromatic, heteroaromatic, and aliphatic substituents have been obtained in very high yields and diastereomeric ratios up to >99:1. The free heterocycles can be easily obtained by a simple and mild desulfinylation procedure. Both enantiomers of the free heterocycles can be prepared with the same good results by changing the absolute configuration of the sulfur atom of the sulfinyl group.

Intramolecular Bromoamination of Conjugated N-Tosylaminodienes Using N-Bromosuccinimide. Synthesis of Bromoallyl-Substituted N-Heterocycles and Their Applications as Building Blocks

The bromonium-promoted cyclization of conjugated aminodienes is described. The reaction proceeds smoothly in the presence of N-bromosuccinimide as halonium promoter, and using N-tosyl-protected aminodienes as substrates, to give the corresponding halocyclization products in high yields and with high diastereoselectivities. It can be envisaged that the formation of these products is the result of an SN2′-type ring-opening of a terminal bromonium intermediate in a 5-exo-trig or 6-exo-trig cyclization mode. The presence of an allyl bromide moiety in the haloamination products makes these molecules highly attractive from a synthetic point of view, as it opens the way for further transformations. Thus, allylic substitution reactions with different nucleophiles (acetate, azide, cyanide, and malonate), palladium-catalysed Suzuki coupling, and silver-mediated bromine displacement reactions were carried out successfully.

Impregnated palladium on magnetite as catalyst for direct arylation of heterocycles

Palladium impregnated on magnetite is an efficient, cheap and easy to prepare catalyst for the direct arylation of heterocycles. Good yields are afforded under relatively mild conditions and a broad substrate scope is evident. The catalyst is regioselective in many cases, affording arylated products, at the C2- or C3-position (depending of the heterocycle used). The methodology can be extended to prepare chromenes through an intramolecular direct arylation reaction. Some evidence is provided for two catalyst deactivation pathways, which prevents efficient recycling.

Organic reactions in ionic liquids: N-alkylation of phthalimide and several nitrogen heterocycles

N-Alkylation of heterocyclic compounds bearing an acidic hydrogen atom attached to nitrogen with alkyl halides is accomplished in ionic liquids ([bmim]BF4 = 1-butyl-3-methylimidazolium tetrafluoroborate, [bmim]PF6 = 1-butyl-3-methylimida-zolium hexafluorophosphate, [buPy]BF4 = butylpyridinium tetra­fluoroborate) in the presence of potassium hydroxide as a base. In this manner, phthalimide, indole, benzimidazole, succinimide can be successfully alkylated. The procedure is convenient, efficient, and generally affords the N-alkylated product exclusively.

The use of organotellurium heterocycles as precursors for novel organometallic compounds

The reactions of group 16 heterocycles with organometallic reagents are described. Thiophenes have been used as models for organic sulfur in coal and their reactivity towards triiron dodecacarbonyl has been investigated. Reaction of unsubstituted thiophene with Fe3(CO)12 results in desulfurisation of the heterocycle, with the organic fragment being recovered in the form of the ferrole, C4H4.Fe2(CO)6. In addition a novel organometallic compound of iron is isolated, the formula of which is shown to be C4H4.Fe3(CO)8. Bezothiophene reacts with Fe3(CO)12 to yield benzothiaferrole, C8H6S.Fe2(CO)6, in which the sulfur is retained in the heterocycle. Dibenzothiophene, a more accurate model for organic sulfur in coal, displays no reactivity towards the iron carbonyl, suggesting that the more condensed systems will desulfurise less readily. Microwave methodology has been successful in accelerating the reactions of thiophenes with Fe3(CO)12. However, reaction of benzothiophene does not proceed to the desulfurisation stage while dibenzothiophene is unreactive even under microwave conditions. Tellurophenes (Te analogues of thiophenes) are shown to mimic the behaviour of thiophenes towards certain organometallic reagents with the advantage that their greater reactivity enables recovery of products in higher yields. Hence, reaction of tellurophene with Fe3(CO)12 again affords the ferrole but with an almost ten-fold increase in yield over thiophene. More significantly, dibenzotellurophene is also detellurated by the iron carbonyl affording the previously inaccessible dibenzoferrole, C12H8.Fe2(CO)6, thereby demonstrating the mechanistic feasibility of dechalcogenation of the more condensed aromatic molecules. The potential of tellurium heterocycles to act as precursors for novel organometallics is also recognised owing to the relatively facile elimination of the heteroatom from these systems. Thus, 2-telluraindane reacts with Fe3(CO)12 to yield a novel organometallic compound of formula C16H16.Fe(CO)3, arising from the unsymmetric dimerisation of two organic fragments.

Novel Synthesis of Carbocycles and Heterocycles Employing Zwitterions Derived from Allenic Esters

Carbon-carbon and carbon-heteroatom bond formations constitute the central events in organic synthesis. In view of this, much of the research in organic synthesis has been focused on devising novel and efficient methods for such bond constructions. In general, polar, pericyclic and radical methodologies are employed for this purpose. The polar and radical reactions proceed via reactive intermediates such as carbanions, enols/enolates, enamines, carbocations, radical cations, radical anions, carbenes, zwitterions etc. In recent years, there has been enormous interest in the chemistry of zwitterionic species largely from the standpoint of their applications in multicomponent reactions (MCRs) and organocatalytic reactions. Zwitterions formed by the addition of nucleophiles to electrophilic π-systems such as acetylenic esters and azoesters have been the subject of extensive investigations; their synthetic utility, however, remained largely unexplored. Investigations in a number of laboratories, including our own, have shown that zwitterions of the type mentioned above on reaction with electrophiles give rise to carbo- and heterocyclic products by 1,3- or 1,4-dipolar cycloadditions. Recently, allenoates, another class of active π-systems were introduced to this field. Against this background, a systematic investigation of the reactions of various zwitterions derived from allenoates with different electrophiles especially 1,2-diones, were carried out. The results of these studies are embodied in the thesis entitled “Novel Synthesis of Carbocycles and Heterocycles Employing Zwitterions Derived from Allenic Esters”.

Synthesis and characterization of electron deficient heterocycles as building blocks for electronic materials

This thesis describes the synthesis of a new electropolymerizable viologen derivative. A reasonably high-yielding route is reported, and a preliminary investigation of its polymerisation is described. The viologen and its precursors were examined by 1H NMR, MS, IR and elemental analysis. The energies of the band gap for the materials have been calculated using UV-vis spectroscopy, and cyclic voltammetry was also used to estimate the oxidation and the reduction potentials and to calculate the HOMO and LUMO energies. Theoretical calculations were performed using DFT. The attempted synthesis of a new flavin-functionalised phenanthroline derivative is described. Unfortunately, the protocol used failed to provide the desired compounds.