Mechatronic design of a high frequency probe for haptic interaction

Current force feedback, haptic interface devices are generally limited to the display of low frequency, high amplitude spatial data. A typical device consists of a low impedance framework of one or more degrees-of-freedom (dof), allowing a user to explore a pre-defined workspace via an end effector such as a handle, thimble, probe or stylus. The movement of the device is then constrained using high gain positional feedback, thus reducing the apparent dof of the device and conveying the illusion of hard contact to the user. Such devices are, however, limited to a narrow bandwidth of frequencies, typically below 30Hz, and are not well suited to the display of surface properties, such as object texture. This paper details a device to augment an existing force feedback haptic display with a vibrotactile display, thus providing a means of conveying low amplitude, high frequency spatial information of object surface properties. 1. Haptics and Haptic Interfaces Haptics is the study of human touch and interaction with the external environment via touch. Information from the human sense of touch can be classified in to two categories, cutaneous and kinesthetic. Cutaneous information is provided via the mechanoreceptive nerve endings in the glabrous skin of the human hand. It is primarily a means of relaying information regarding small-scale details in the form of skin stretch, compression and vibration.

Haptic interfaces: the live and the recorded body in Beckett's Eh Joe on stage and screen

Beckett’s sparse and minimalist pieces have continuously addressed the nature and characteristics of the media for which they were written. What does it mean when a work written specifically for television is transposed to the stage, as film director Atom Egoyan did in his 2006 version of Beckett’s Eh Joe? This article will focus on the implications of such a transposition and discuss how Egoyan’s version reveals the haptic interface present in the original piece, between body and technology, between the flesh and “spirit made light” of the electronic broadcast.

Extending haptic device capability for 3D virtual grasping

This paper presents an investigation into the workspace constraints observed through the use of multiple single point haptic interfaces, which lead to the design of a novel grasping device that improves upon current commercial haptic interfaces. The presented device is desktop based, and has been designed to maximise the haptic workspace while offering the ability to grasp and manipulate virtual objects, which is a function that current commercial interfaces are limited in providing. The performance of the commercial haptic interface in producing sustained effective operation and increased workspace with the attached haptic gripper is evaluated, and the improvement of both has been determined.

3D virtual haptic cone for intuitive vehicle motion control

Haptic technology provides the ability for a system to recreate the sense of touch to a human operator, and as such offers wide reaching advantages. The ability to interact with the human's tactual modality introduces haptic human-machine interaction to replace or augment existing mediums such as visual and audible information. A distinct advantage of haptic human-machine interaction is the intrinsic bilateral nature, where information can be communicated in both directions simultaneously. This paper investigates the bilateral nature of the haptic interface in controlling the motion of a remote (or virtual) vehicle and presents the ability to provide an additional dimension of haptic information to the user over existing approaches [1-4]. The 3D virtual haptic cone offers the ability to not only provide the user with relevant haptic augmentation pertaining to the task at hand, as do existing approaches, however, to also simultaneously provide an intuitive indication of the current velocities being commanded.

3D particle-based cell modelling for haptic microrobotic cell injection

Introducing haptic interface to conduct microrobotic intracellular injection has many beneficial implications. In particular, the haptic device provides force feedback to the bio-operator's hand. This paper introduces a 3D particle-based model to simulate the deformation of the cell membrane and corresponding cellular forces during microrobotic cell injection. The model is based on the kinematic and dynamic of spring – damper multi particle joints considering visco-elastic fluidic properties. It simulates the indentation force feedback as well as cell visual deformation during the microinjection. The model is verified using experimental data of zebrafish embryo microinjection. The results demonstrate that the developed cell model is capable of estimating zebrafish embryo deformation and force feedback accurately.

Human-Computer interaction methodologies applied in the evaluation of haptic digital musical instruments

Recent developments in interactive technologies have seen major changes in the manner in which artists, performers, and creative individuals interact with digital music technology; this is due to the increasing variety of interactive technologies that are readily available today. Digital Musical Instruments (DMIs) present musicians with performance challenges that are unique to this form of computer music. One of the most significant deviations from conventional acoustic musical instruments is the level of physical feedback conveyed by the instrument to the user. Currently, new interfaces for musical expression are not designed to be as physically communicative as acoustic instruments. Specifically, DMIs are often void of haptic feedback and therefore lack the ability to impart important performance information to the user. Moreover, there currently is no standardised way to measure the effect of this lack of physical feedback. Best practice would expect that there should be a set of methods to effectively, repeatedly, and quantifiably evaluate the functionality, usability, and user experience of DMIs. Earlier theoretical and technological applications of haptics have tried to address device performance issues associated with the lack of feedback in DMI designs and it has been argued that the level of haptic feedback presented to a user can significantly affect the user’s overall emotive feeling towards a musical device. The outcome of the investigations contained within this thesis are intended to inform new haptic interface.

Visibility volumes for interactive path optimization

We describe a real-time system that supports design of optimal flight paths over terrains. These paths either maximize view coverage or minimize vehicle exposure to ground. A volume-rendered display of multi-viewpoint visibility and a haptic interface assists the user in selecting, assessing, and refining the computed flight path. We design a three-dimensional scalar field representing the visibility of a point above the terrain, describe an efficient algorithm to compute the visibility field, and develop visual and haptic schemes to interact with the visibility field. Given the origin and destination, the desired flight path is computed using an efficient simulation of an articulated rope under the influence of the visibility gradient. The simulation framework also accepts user input, via the haptic interface, thereby allowing manual refinement of the flight path.

Workspace comparisons of setup configurations for human-robot interaction

In virtual assembly verification or remote maintenance tasks, bimanual haptic interfaces play a crucial role in successful task completion. This paper proposes a method for objectively comparing how well a haptic interface covers the reachable workspace of human arms. Two system configurations are analyzed for a recently introduced haptic device that is based on two DLR-KUKA light weight robots: the standard configuration, where the device is opposite the human operator, and the ergonomic configuration, where the haptic device is mounted behind the human operator. The human operator directly controls the robotic arms using handles. The analysis is performed using a representation of the robot arm workspace. The merits of restricting the comparisons to the most significant regions of the human workspace are discussed. Using this method, a greater workspace correspondence for the ergonomic configuration was shown. ©2010 IEEE.

The Proceedings of the First PHANToM User's Group Workshop

These proceedings summarize the results of the First PHANToM User's Group Workshop held September 27-30, 1996 MIT. The goal of the workshop was to bring together a group of active users of the PHANToM Haptic Interface to discuss the scientific and engineering challenges involved in bringing haptics into widespread use, and to explore the future possibilities of this exciting technology. With over 50 attendees and 25 presentations the workshop provided the first large forum for users of a common haptic interface to share results and engage in collaborative discussions. Short papers from the presenters are contained herein and address the following topics: Research Effort Overviews, Displays and Effects, Applications in Teleoperation and Training, Tools for Simulated Worlds and, Data Visualization.

A navigation and object location device for the blind

Gemstone Team Vision

Modelling human dynamics in-situ for rehabilitation and therapy robots

This paper outlines some rehabilitation applications of manipulators and identifies that new approaches demand that the robot make an intimate contact with the user. Design of new generations of manipulators with programmable compliance along with higher level controllers that can set the compliance appropriately for the task, are both feasible propositions. We must thus gain a greater insight into the way in which a person interacts with a machine, particularly given that the interaction may be non-passive. We are primarily interested in the change in wrist and arm dynamics as the person co-contracts his/her muscles. It is observed that this leads to a change in stiffness that can push an actuated interface into a limit cycle. We use both experimental results gathered from a PHANToM haptic interface and a mathematical model to observe this effect. Results are relevant to the fields of rehabilitation and therapy robots, haptic interfaces, and telerobotics

Design of a virtual reality training system for micro-robotic cell injection

This paper discusses the design of a virtual reality (VR) training system for micro-robotic cell injection. A brief explanation of cell injection and the challenges associated with the procedure are first presented. This is followed by discussion of the skills required by the bio-operator to achieve successful injection, such as accuracy, trajectory and applied force. The design of the VR system which includes the visual display, input controllers, mapping strategies, haptic guidance and output data is then discussed. Initial evaluation of the VR system is presented including analysis and discussion based on conducted user evaluations. Finally, given the findings of the initial evaluation, this paper concludes that an effective haptically-enabled virtual cell injection training system is feasible, and recommendations for improvement and future work are given.

Generic control interface for networked haptic virtual environments

As Virtual Reality pushes the boundaries of the human computer interface new ways of interaction are emerging. One such technology is the integration of haptic interfaces (force-feedback devices) into virtual environments. This modality offers an improved sense of immersion to that achieved when relying only on audio and visual modalities. The paper introduces some of the technical obstacles such as latency and network traffic that need to be overcome for maintaining a high degree of immersion during haptic tasks. The paper describes the advantages of integrating haptic feedback into systems, and presents some of the technical issues inherent in a networked haptic virtual environment. A generic control interface has been developed to seamlessly mesh with existing networked VR development libraries.