Multi-body simulation of a canine hind limb: model development, experimental validation and calculation of ground reaction forces

Background: Among other causes the long-term result of hip prostheses in dogs is determined by aseptic loosening. A prevention of prosthesis complications can be achieved by an optimization of the tribological system which finally results in improved implant duration. In this context a computerized model for the calculation of hip joint loadings during different motions would be of benefit. In a first step in the development of such an inverse dynamic multi-body simulation (MBS-) model we here present the setup of a canine hind limb model applicable for the calculation of ground reaction forces. Methods: The anatomical geometries of the MBS-model have been established using computer tomography- (CT-) and magnetic resonance imaging- (MRI-) data. The CT-data were collected from the pelvis, femora, tibiae and pads of a mixed-breed adult dog. Geometric information about 22 muscles of the pelvic extremity of 4 mixed-breed adult dogs was determined using MRI. Kinematic and kinetic data obtained by motion analysis of a clinically healthy dog during a gait cycle (1 m/s) on an instrumented treadmill were used to drive the model in the multi-body simulation. Results and Discussion: As a result the vertical ground reaction forces (z-direction) calculated by the MBS-system show a maximum deviation of 1.75%BW for the left and 4.65%BW for the right hind limb from the treadmill measurements. The calculated peak ground reaction forces in z- and y-direction were found to be comparable to the treadmill measurements, whereas the curve characteristics of the forces in y-direction were not in complete alignment. Conclusion: In conclusion, it could be demonstrated that the developed MBS-model is suitable for simulating ground reaction forces of dogs during walking. In forthcoming investigations the model will be developed further for the calculation of forces and moments acting on the hip joint during different movements, which can be of help in context with the in silico development and testing of hip prostheses.

Effect of firefighter boots and viscoelastic insoles on the impact force of the ground reaction force’s vertical component

The aims of the present study were to determine the effect of firefighter's boots on the vertical component of the ground reaction force (GRF) at heel strike, also known as heel strike transient and to analyze the effect of the viscoelastic insoles placed into the firefighter’s boots on this force during the gait. The magnitude of the impact force (FZI) from the vertical ground reaction force, the time to the production of this force (TZI) and the loading rate (GC) were registered. 39 firefighters without any pathology during 2 years before the study were recruited. Three different walking conditions were tested: 1) gait with firefighter's boots, 2) gait with firefighter's boots and viscoelastic insoles and 3) gait with sport shoes. The results showed a higher production and magnitude of the impact force during gait with firefighter's boots than during gait with sport shoes (13,1 vs. 2,6 % of occurrence of the impact force and 61,39 ± 35,18 %BW (body weight) vs. 49,38 ± 22,99 %BW, respectively). The gait with viscoelastic insoles placed into the firefighter's boots did not show significant differences in any of the parameters characterizing the impact force compared to the gait without insoles. The results of this study show a lower cushioning of the impact force during the gait with firefighter's boots in comparison to the gait with sport shoes and the inefficiency of the viscoelastic insoles placed inside the firefighter's boots to ameliorate the cushioning of the impact force at natural walking speed.

Technique to measure heats of reaction of Ti-B, Al-Ti-B, and Al-Ti-B4C powder blends

In this research, a modification to initiation aid ignition in bomb calorimetry that involves systemically blending levels of boron and potassium nitrate initiation aids with a bulk structural energetic elemental power blend is developed. A regression is used to estimate the nominal heat of reaction for the primary reaction. The technique is first applied to the synthesis of TiB2 as a validation study to see if close proximity to literature values can be achieved. The technique is then applied to two systems of interest, Al-Ti-B, and Al-Ti-B4C. In all three investigations, x-ray diffraction is used to characterize the product phases of the reactions to determine the extent and identity of the product phases and any by-products that may have formed as a result of adding the initiation aid. The experimental data indicates the technique approximates the heat of reaction value for the synthesis of TiB2 from Ti-B powder blends and the formation of TiB2 is supported by volume fraction analysis by x-ray diffraction. Application to the Al-Ti-B and Al-Ti-B4C blends show some correlation with variation of the initiation aid, with x-ray diffraction showing the formation of equilibrium products. However, these blends require further investigation to resolve more complex interactions and rule out extraneous variables.

Detection of mycoplasmas in urethral swabs from HIV-1 infected patients and control individuals using culture techniques and polymerase chain reaction

The objective of the present study was to determine the prevalence of certain mycoplasma species, i.e., Mycoplasma hominis, Ureaplasma urealyticum and Mycoplasma penetrans, in urethral swabs from HIV-1 infected patients compared to swabs from a control group. Mycoplasmas were detected by routine culture techniques and by the Polymerase Chain Reaction (PCR) technique, using 16SrRNA generic primers of conserved region and Mycoplasma penetrans specific primers. The positivity rates obtained with the two methods were comparable. Nevertheless, PCR was more sensitive, while the culture techniques allowed the quantification of the isolates. The results showed no significant difference (p < 0.05) in positivity rates between the methods used for mycoplasma detection.

A generalized 1D particle transport method for convection diffusion reaction model

This work is devoted to the development of numerical method to deal with convection diffusion dominated problem with reaction term, non - stiff chemical reaction and stiff chemical reaction. The technique is based on the unifying Eulerian - Lagrangian schemes (particle transport method) under the framework of operator splitting method. In the computational domain, the particle set is assigned to solve the convection reaction subproblem along the characteristic curves created by convective velocity. At each time step, convection, diffusion and reaction terms are solved separately by assuming that, each phenomenon occurs separately in a sequential fashion. Moreover, adaptivities and projection techniques are used to add particles in the regions of high gradients (steep fronts) and discontinuities and transfer a solution from particle set onto grid point respectively. The numerical results show that, the particle transport method has improved the solutions of CDR problems. Nevertheless, the method is time consumer when compared with other classical technique e.g., method of lines. Apart from this advantage, the particle transport method can be used to simulate problems that involve movingsteep/smooth fronts such as separation of two or more elements in the system.

Évaluation objective de la douleur chronique secondaire à l’arthrose chez le chat

La prévalence de l’arthrose féline augmente fortement avec l’âge atteignant plus de 80% des chats de plus de 11 ans. L'arthrose induit une douleur chronique s’exprimant par des changements de comportements et une diminution de la mobilité. Il n'existe aucun outil validé pour évaluer la douleur chronique associée à l’arthrose chez le chat. Conséquemment, aucun traitement ciblant cette douleur n’a pu être validé. Notre hypothèse de recherche est que la douleur arthrosique chez le chat induit des handicaps fonctionnels, des changements neurophysiologiques et un état d'hypersensibilité qu'il faut évaluer pour quantifier de manière fiable cette douleur et ses répercussions sur la qualité de vie de l'animal. Nos objectifs étaient 1) de développer des outils adaptés aux chats mesurant les handicaps fonctionnels grâce à des outils cinématiques, cinétiques et de suivi de l'activité motrice ; 2) de caractériser les changements fonctionnels et neurophysiologiques secondaires à la douleur arthrosique et de tester avec ces outils un traitement analgésique à base d'anti-inflammatoire non stéroïdien ; 3) de développer une technique adaptée aux chats pouvant caractériser la présence du phénomène de sensibilisation centrale à l'aide d'une évaluation de la sommation temporelle mécanique ; 4) de tester la possibilité de mesurer le métabolisme glucidique cérébral par tomographie d’émission par positrons comme marqueur des changements supraspinaux secondaires à la chronicisation de la douleur. Grâce au développement d’outils de mesure de douleur chronique objectifs, sensibles et répétables nous avons caractérisé la douleur chez les chats arthrosiques. Ils présentent des signes de boiterie quantifiée par une diminution de l’amplitude de l’articulation ou par une diminution de la force verticale d’appui au sol et une diminution de l’activité motrice quotidienne. Ces deux derniers outils ont permis de démontrer qu’un anti-inflammatoire non stéroïdien (le méloxicam) administré pendant quatre semaines réduit la douleur arthrosique. De plus, grâce au développement de tests sensoriels quantitatifs et à l'utilisation d'imagerie cérébrale fonctionnelle, nous avons démontré pour la première fois que la douleur arthrosique conduisait à des modifications du système nerveux central chez le chat. Particulièrement, les chats arthrosiques développent le phénomène de sensibilisation centrale mis en évidence par un seuil de retrait aux filament de von Frey diminué (mesure réflexe) mais aussi par une facilitation de la sommation temporelle mécanique (mesure tenant compte de la composante cognitive et émotionnelle de la douleur). L'augmentation du métabolisme cérébral dans le cortex somatosensoriel secondaire, le thalamus et la substance grise périaqueducale, souligne aussi l'importance des changements liés à la chronicisation de la douleur. Un traitement analgésique adapté à l’arthrose permettra d’améliorer la qualité de vie des chats atteints, offrira une option thérapeutique valide aux praticiens vétérinaires, et profitera aux propriétaires qui retrouveront un chat actif et sociable. La découverte de l'implication du phénomène de sensibilisation central combiné à l'investigation des changements cérébraux secondaires à la douleur chronique associée à l'arthrose par imagerie fonctionnelle ouvre de nouvelles avenues de recherche chez le chat (développement et/ou validation de traitements adaptés à l'état d'hypersensibilité) et les humains (potentiel modèle naturel de douleur chronique associée à l'arthrose).

Avaliação da técnica de hemocultura pela reação em cadeia da polimerase (PCR) utilizando os iniciadores P35/P36 e TCZ1/TCZ2 para a detecção de Trypanosoma cruzi em cães e gatos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise biomecânica instrumental da técnica de judô Morote Seoi Nage, através de uma metodologia de treinamento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Inflatable rescue boat-related injuries in Queensland surf lifesavers: The epidemiology - biomechanics interface

The objective was to describe the relationship between epidemiological and biomechanical factors in the causal pathway of inflatable rescue boat (IRB)-related injuries in Australian surf lifesavers; to develop epidemiological and biomechanical methodologies and measurement instruments that identify and measure the risk factors, for use in future epidemiological studies. Epidemiological and biomechanical models of injury causation were combined. Host, agent and environmental factors that influenced total available force for transfer to host were specified. Measurement instruments for each of the specified risk factors were developed. Instruments were piloted in a volunteer sample of surf lifesavers. Participant characteristics were recorded using demographic questionnaires; IRB operating techniques were recorded using a custom-made on-board camera (Grand RF-Guard) and images of operating techniques were coded by two independent observers. Ground reaction forces transmitted to the host through the lifesaver's feet at the time of wave impact were measured using a custom-built piezoelectric force platform. The demographic questionnaire was found practical; the on-board camera functioned successfully within the target environment. Agreement between independent coders of IRB operating technique images was significant (p < 0.001) with Kappa values ranging from 0.5 to 0.7. Biomechanical instruments performed successfully in the target environment. Peak biomechanical forces were 415.6N (left foot) and 252.9N (right foot). This study defines the relationship between epidemiological and biomechanical factors in modifying the risk of IRB-related injury in a population of surf lifesavers. Preliminary feasibility of combining epidemiological and biomechanical information has been demonstrated. Further testing of the proposed model and measurement instruments is required.

Estudo de arranjos de antenas de microfita com Patch quase-fractal para comunicações sem fio

In this dissertation, are presented two microstrip antennas and two arrays for applications in wireless communication systems multiband. Initially, we studied an antenna and a linear array consisting of two elements identical to the patch antenna isolated. The shape of the patch used in both structures is based on fractal geometry and has multiband behavior. Next a new antenna is analyzed and a new array such as initial structure, but with the truncated ground plane, in order to obtain better bandwidths and return loss. For feeding the structures, we used microstrip transmission line. In the design of planar structures, was used HFSS software for the simulation. Next were built and measures electromagnetic parameters such as input impedance and return loss, using vector network analyzer in the telecommunications laboratory of Federal University of Rio Grande do Norte. The experimental results were compared with the simulated and showed improved return loss for the first array and also appeared a fourth band and increased directivity compared with the isolated antenna. The first two benefits are not commonly found in the literature. For structures with a truncated ground planes, the technique improved impedance matching, bandwidth and return loss when compared to the initial structure with filled ground planes. Moreover, these structures exhibited a better distribution of frequency, facilitating the adjustment of frequencies. Thus, it is expected that the planar structures presented in this study, particularly arrays may be suitable for specific applications in wireless communication systems when frequency multiband and wideband transmission signals are required.

Running Mechanics During the World's Most Challenging Mountain Ultramarathon

The aim of study was to examine the effects of the world's most challenging mountain ultramarathon (Tor des Geants [TdG]) on running mechanics. Mechanical measurements were undertaken in male runners (n = 16) and a control group (n = 8) before (PRE), during (MID), and after (POST) the TdG. Contact (tc) and aerial (ta) times, step frequency (f), and running velocity (v) were sampled. Spring-mass parameters of peak vertical ground-reaction force (Fmax), vertical downward displacement of the center of mass (Deltaz), leg-length change (DeltaL), and vertical (kvert) and leg (kleg) stiffness were computed. Significant decreases were observed in runners between PRE and MID for ta (P < .001), Fmax (P < .001), Deltaz (P < .05), and kleg (P < .01). In contrast, f significantly increased (P < .05) between PRE and MID-TdG. No further changes were observed at POST for any of those variables, with the exception of kleg, which went back to PRE. During the TdG, experienced runners modified their running pattern and spring-mass behavior mainly during the first half. The current results suggest that these mechanical changes aim at minimizing the pain occurring in lower limbs mainly during the eccentric phases. One cannot rule out that this switch to a "safer" technique may also aim to anticipate further damages.

Caractérisation pharmacocinétique et pharmacodynamique de la lidocaïne avec ou sans adrénaline lors d’un bloc paravertébral du plexus brachial chez le chien

Au cours des vingt dernières années, l’anesthésie régionale est devenue, autant en médecine vétérinaire qu’humaine, un outil essentiel à l’élaboration de protocoles analgésiques péri-opératoires. Parmi l’éventail de techniques mises au point en anesthésie canine, le bloc paravertébral du plexus vertébral (PBPB) et sa version modifiée sont d’un grand intérêt pour toute procédure du membre thoracique, dans sa portion proximale. Toutefois, l’essentiel des données publiées à ce jour provient d’études colorimétriques, sans évaluation clinique, et peu d’information est disponible sur les techniques de localisation nerveuse envisageables à ce site. Notre étude visait à décrire une approche échoguidée du PBPB modifié, puis à caractériser ses paramètres pharmacocinétiques et pharmacodynamiques après administration de lidocaïne (LI) ou lidocaïne adrénalinée (LA). Huit chiens ont été inclus dans un protocole prospectif, randomisé, en aveugle et croisé, réparti sur trois périodes. L’impact pharmacodynamique du bloc effectué avec LI ou LA a été évalué régulièrement pour 180 min suivant son exécution. Le traitement à l’adrénaline n’a pas démontré d’impact significatif (P = 0,845) sur la durée du bloc sensitif, tel qu’évalué par un stimulus douloureux mécanique appliqué aux dermatomes ciblés. À l’opposé, l’atteinte proprioceptive évaluée par la démarche a été trouvée prolongée (P = 0,027) et le bloc moteur mesuré par le pic de force verticale (PVF) au trot sur la plaque de force s’est avéré plus marqué (PVF réduit; P = 0,007) sous LA. À l’arrêt comme au trot, le nadir de la courbe PVF-temps a été trouvé retardé (P < 0,005) et la pente ascendante de retour aux valeurs normales adoucie (P = 0,005). Parallèlement aux évaluations cliniques, des échantillons plasmatiques ont été collectés régulièrement afin de quantifier et décrire le devenir pharmacocinétique de la lidocaïne. Parmi les trois élaborés, un modèle bi-compartimental doté d’une double absorption asynchrone d’ordre zéro a finalement été sélectionné et appliqué aux données expérimentales. Sous LA, la Cmax a été trouvée significativement diminuée (P < 0,001), les phases d’absorption prolongées [P < 0,020 (Dur1) et P < 0,001 (Dur2)] et leurs constantes réduites [P = 0,046(k01) et P < 0,001 (k02)], le tout en concordance avec les effets proprioceptifs et moteurs rapportés. Bien que l’extrapolation du dosage soit maintenant théoriquement envisageable à partir du modèle mis en lumière ici, des études supplémentaires sont encore nécessaires afin d’établir un protocole de PBPB d’intérêt clinique. L’analyse sur plaque de force pourrait alors devenir un outil de choix pour évaluer l’efficacité du bloc dans un cadre expérimental.

Caractérisation pharmacocinétique et pharmacodynamique de la lidocaïne avec ou sans adrénaline lors d’un bloc paravertébral du plexus brachial chez le chien

Au cours des vingt dernières années, l’anesthésie régionale est devenue, autant en médecine vétérinaire qu’humaine, un outil essentiel à l’élaboration de protocoles analgésiques péri-opératoires. Parmi l’éventail de techniques mises au point en anesthésie canine, le bloc paravertébral du plexus vertébral (PBPB) et sa version modifiée sont d’un grand intérêt pour toute procédure du membre thoracique, dans sa portion proximale. Toutefois, l’essentiel des données publiées à ce jour provient d’études colorimétriques, sans évaluation clinique, et peu d’information est disponible sur les techniques de localisation nerveuse envisageables à ce site. Notre étude visait à décrire une approche échoguidée du PBPB modifié, puis à caractériser ses paramètres pharmacocinétiques et pharmacodynamiques après administration de lidocaïne (LI) ou lidocaïne adrénalinée (LA). Huit chiens ont été inclus dans un protocole prospectif, randomisé, en aveugle et croisé, réparti sur trois périodes. L’impact pharmacodynamique du bloc effectué avec LI ou LA a été évalué régulièrement pour 180 min suivant son exécution. Le traitement à l’adrénaline n’a pas démontré d’impact significatif (P = 0,845) sur la durée du bloc sensitif, tel qu’évalué par un stimulus douloureux mécanique appliqué aux dermatomes ciblés. À l’opposé, l’atteinte proprioceptive évaluée par la démarche a été trouvée prolongée (P = 0,027) et le bloc moteur mesuré par le pic de force verticale (PVF) au trot sur la plaque de force s’est avéré plus marqué (PVF réduit; P = 0,007) sous LA. À l’arrêt comme au trot, le nadir de la courbe PVF-temps a été trouvé retardé (P < 0,005) et la pente ascendante de retour aux valeurs normales adoucie (P = 0,005). Parallèlement aux évaluations cliniques, des échantillons plasmatiques ont été collectés régulièrement afin de quantifier et décrire le devenir pharmacocinétique de la lidocaïne. Parmi les trois élaborés, un modèle bi-compartimental doté d’une double absorption asynchrone d’ordre zéro a finalement été sélectionné et appliqué aux données expérimentales. Sous LA, la Cmax a été trouvée significativement diminuée (P < 0,001), les phases d’absorption prolongées [P < 0,020 (Dur1) et P < 0,001 (Dur2)] et leurs constantes réduites [P = 0,046(k01) et P < 0,001 (k02)], le tout en concordance avec les effets proprioceptifs et moteurs rapportés. Bien que l’extrapolation du dosage soit maintenant théoriquement envisageable à partir du modèle mis en lumière ici, des études supplémentaires sont encore nécessaires afin d’établir un protocole de PBPB d’intérêt clinique. L’analyse sur plaque de force pourrait alors devenir un outil de choix pour évaluer l’efficacité du bloc dans un cadre expérimental.

Estudo do salto vertical : uma analise da relação de forças aplicadas

Universidade Estadual de Campinas. Faculdade de Educação Física

Males still have limb asymmetries in multijoint movement tasks more than 2 years following anterior cruciate ligament reconstruction

More than 2 years after undergoing anterior cruciate ligament (ACL) reconstruction, women still present bilateral asymmetries during multijoint movement tasks. Given the well-known ACL-injury gender bias, the goal of this study was to investigate whether males also present such asymmetries more than 2 years after undergoing ACL reconstruction. This study involved 12 participants submitted to ACL reconstruction in the ACL group and 17 healthy participants in the control group. The mean postoperative period was 37 months. The participants executed bilateral countermovement jumps and load squat tasks. The kinematics and ground reaction forces on each lower limb and pelvis were recorded, and used to compute bilateral peak vertical ground reaction forces, peak knee and hip joint powers in the sagittal plane, and the ratio between these powers. For the jump task, the groups had the same performance in the jump height, but for the ACL group the peak knee joint power on the operated side was 13% lower than on the non-operated side (p = 0.02). For the squat task, the hip-knee joint power ratio on the operated side of the ACL group was 31% greater than on the non-operated side (p = 0.02). The ACL group presented a deficit in the operated knee that had its energy generation over time (joint power) partially substituted by the hip joint power of the same side. The fact that, even after more than 2 years following the ACL reconstruction and returning to regular activity, the ACL group still had neuromuscular asymmetries suggests a need for improvement in the ACL reconstruction surgery procedures and/or rehabilitation protocols.