Arcabouço crustal profundo da parte Centro-Norte da margem de Angola: modelo de afinamento e contato de crostas

Este trabalho tem como objetivo a identificação de feições que permitam (1) a construção do arcabouço crustal profundo e da porção superior do manto em parte da Costa de Angola, (2) a comparação deste arcabouço com o embasamento aflorante e (3) a tentativa de adequar estes resultados aos modelos de ruptura continental já publicados. Para alcançar estes objetivos foi feita a interpretação de cinco linhas sísmicas de reflexão profundas (25 Km de profundidade) na costa de Angola, nas Bacias de Kwanza e Baixo Congo, adquiridas pela ION-GXT. As feições identificadas na sísmica de reflexão auxiliaram na determinação dos limites da crosta continental superior e inferior, no reconhecimento das camadas que compõem a crosta oceânica e na identificação da Descontinuidade de Mohorovicic (que marca o limite entre crosta e manto). A interpretação sísmica associada a dados da literatura (que proporcionaram valores de densidade para os pacotes identificados na interpretação sísmica) permitiram a realização de uma modelagem gravimétrica que foi comparada ao dado gravimétrico adquirido durante a aquisição sísmica. A modelagem gravimétrica serviu para validar a interpretação sísmica, atuando como um controle de qualidade para a interpretação. Caso a anomalia gravimétrica gerada pela modelagem não estivesse de acordo com a anomalia medida, a interpretação sísmica era revista na tentativa de um melhor ajuste entre o resultado modelado e o medido. Este ajuste, no entanto, sempre foi feito honrando os refletores que estavam bem marcados na sísmica. Somado a isto, ainda foi utilizado o dado magnético adquirido no campo, no auxilio da interpretação. O arcabouço crustal obtido com a utilização deste método permitiu a comparação dos resultados da interpretação com os modelos de evolução de margens passivas existentes na literatura, mostrando muitos pontos em comum aos modelos que defendem a possibilidade de ocorrência de manto exumado em margens passivas pobres em magmatismo. A interpretação final destes dados mostrou um domínio proximal marcado por uma crosta continental espessa porém pouco afinada em contato com um domínio distal marcado por uma crosta continental muito afinada (crosta hiper-estirada) e, em direção ao centro do oceano, uma região em que ocorre a exumação do manto. A passagem do domínio proximal para o distal ocorre de forma rápida em uma região denominada Zona de Estrangulamento. À oeste do manto exumado é possível identificar a crosta oceânica. O cruzamento dos resultados obtidos neste trabalho com dados do embasamento aflorante no continente africano sugerem um controle do deste nos valores finais de afinamento da crosta continental sob a bacia e nas regiões de manto exumado. Trabalhos recentes realizados na costa de Angola e do Brasil mostram feições semelhantes às identificadas nesta dissertação.

Research on crustal structure and lithosphere property in the Okinawa Trough area

A mass of geological, geophysical and geochemical data and information from the Okinawa Trough area are collected for comprehensive research in the study area from East China to Okinawa Trough and then to Ryukyu Island Are region. According to the seismic tomography result (P and S wave) and the processing result of free-air and Bouguer gravity anomaly and magnetic anomaly data in the study area, the comprehensive interpretation is carried out. The Moho depth distribution of the study area is obtained by the inversion calculation based on gravity data using the Harmonious Series method. The crust properties are analyzed. Meantime, some Cenozoic basalt data from Kuandian (NE China), Hannuoba (North China), Minxi (South China), Penghu Islands (Taiwan Strait), Okinawa Trough and Japan Island Arc regions are chosen to make the comparison research on element- isotopes. The result indicates that the lithosphere thickness in the Okinawa Trough area has obviously decreased, where a Low -velocity layer of upper-mantle has reached the Moho interface and the metasometized asthenosphere has formed. The research result on element- isotopes shows that the characteristic of the crust in the Okinawa Trough area is different from that in East China area and the Ryukyu Island Arc area. It is considered that the crust in the Okinawa Trough area belongs to the transition type, which is quite similar to the feature of the oceanic crust.

Tectonics in the northwestern West Philippine basin

The West Philippine basin (WPB) is a currently inactive marginal basin belonging to Philippine Sea plate, which has a complex formation history and various crust structures. Based on gravity, magnetic and seismic data, the tectonics in West Philippine basin is characterized by amagma spreading stage and strike slip fractures. NNE trending Okinawa-Luzon fracture zone is a large fracture zone with apparent geomorphology and shows a right-handed movement. The results of joint gravity-magnetic-seismic inversion suggest that the Okinawa-Luzon fracture zone has intensive deformation and is a transform fault. Western existence of the NW trending fractures under Ryukyu Islands Arc is the main cause of the differences between south and north Okinawa Trough. The Urdaneta plateau is not a remained arc, but remnant of mantle plume although its lava chemistry is similar to oceanic island basalt (OIB).

南海大陆边缘地壳结构与盆地形成机制--以珠江口－琼东南盆地为例

South China Sea is located in the convergence of Eurasian plate, the Pacific Ocean plate and Indian Ocean-Australia plate. The total area is about 3,500,000 km2, the geologic structure is complicated, and the structure line cut off reciprocal is the marginal sea taking form by that the seafloor spreads during the middle Oligocene. South China Sea continental margin have developed more than 10 large oil-gas bearing basins and a number of medium-small sized basins. These basins contain abundant mineral resources such as oil & gas. The marginal deepwater area in the north part of South China Sea has become our country’s strategic energy prospecting frontier. The deepwater area of Zhujiangkou and Qiongdongnan basins is the research target in this thesis. The thesis studied deep structure and the earth dynamics of the north part of South China Sea margin, and these researches provide scientific basis for oil-gas resources strategic investigation and valuation in deepwater sea area of north part slope of South China Sea. In order to develop the research of rebuilding velocities and density architecture of earth shell in region of interest, in marginal deepwater area in the north part of South China, we adopted 14 long-cable seismic reflection profile data of 3556.41 kilometers in total, the gravity measurement data along profiles (3851.44 kilometers in total), the magnetic observation along profiles (3838.4 kilometers in total) and depth measurement along profile, the logging data of 11 wells in project, the interpreted fault parameter and preexisting geologic and geophysical research achievement. This thesis has carried out concretely studying research as follows: 1. Overlay-velocity data sampling and analysis, interval velocity calculation, time-depth conversion, model building of earth shell velocity and layering character of earth shell are studied on 14 deep sections. Velocity structure in region of interest has revealed: Changchang is the sag with thinnest crust in Qiongdongnan basin; the sedimentary thickness lowers gradually from north to south, and the thickness change from west to east is milder. The sags’ sedimentary velocities in Qiongdongnan basin have obvious demarcation. The velocity of the 8000 meters sedimentary rocks is 4700 m/s in Shunde sag and Baiyun sag, and is the lowest; at that depth, the velocity very different in Liwan sag and Baiyun sag, which is about 800m/s. 2. Extracting gravity data and building of initial crust density model along the section; With Bouguer gravity anomaly data as constraint, revising density distributes of initial model, and building the crust density model. 3. With crust velocity and density as constraint, correcting the effect of thermobaric field and constructing constitution structure of rock in region of interest. By this research, we known that rocks in Zhujiangkou upper crustal layer are chiefly granite-gneiss, quartzite, granodiorite and basalt, however, rocks in Qiongdongnan basin upper earth shell are chiefly composed of granite-gneiss, quartzite, granodiorite, diorite and basalt. 4. Synthetically crust velocity and density structure, gaining expanding factor on crust and entire crust along section. The result is indicated: the expanding factor in every sag rises from northwest to southeast, which have reflected thinning characteristic of crust from continent to ocean. Intra-crustal deformation degree in Changchang and Ledong-Lingshui sag is bigger than that in Songnan-Baodao sag. Entire crust extension factor in Changchang and Songnan-Baodao sag is greater than that in Ledong-Lingshui sag, which can make an explanation of frequently event and longer heating process in middle-east of Qiongdongnan basin. 5. Synthesize multidisciplinary information to discuss the earth dynamics significance of discordogenic seismic profile in deepwater area of Zhujiangkou and Qiongdongnan basins.

印度与欧亚板块强烈相互作用区深部结构特征研究

The central-south Tibet is a part of the products of the continental plate collision between Eurasia and India. To study the deep structure of the study area is significant for understanding the dynamics of the continental-continental collision. A 3-D density model matched well with the observations in the central-south Tibet was proposed in this study. In addition, this study has also used numerical simulation method to prove that Quasi-Love (QL) wave is deduced by anisotropy variation but not by lateral heterogeneity. Meanwhile, anisotropy variation in the upper mantle of the Qiangtang terrane and Lhasa terrane is detected by the QL waves observed in recorded seismograms. Based on the gravity modeling, some results are summarized as follows: 1) Under the constrain of geometrical structure detected by seismic data, a 3-D density model and Moho interface are proposed by gravity inversion of the central-south Tibet. 2) The fact that the lower crustal densities are smaller than 3.2 g/cm3, suggests absence of eclogite or partial eclogitization due to delamination under the central-south Tibet. 3) Seismicity will be strong or weak in the most negative Bouguer gravity anomaly. So there is no a certain relationship between seismicity and Bouguer gravity anomaly. 4) Crustal composition are determined after temperature-pressure calibration of seismic P wave velocity. The composition of lower crust might be one or a mixture of: 1. amphibolite and greenschist facies basalt beneath the Qiangtang terrane; 2. gabbro-norite-troctolite and mafic granulite beneath the Lhasa terrane. Because the composition of the middle crust cannot be well constrained by the above data set, the data set published by Rudnick & Fountain (1995) is used for comparison. It indicated the composition of the middle crust is granulite facies and might be pelitic gneisses.Granulite facies used to be interpreted as residues of partial melting, which coincidences with the previous study on partial melting middle crust. Amphibolite facies are thought to be produced after delamination, when underplating works in the rebound of the lower crust and lithospheric mantle. From the seismology study, I have made several followed conclusions: 1) Through the numerical simulation experiment of surface wave propagating in heterogeneity media, we can find that amplitude and polarization of surface wave only change a little when considering heterogeneity. Furthermore, it is proved that QL waves, generated by surface wave scattering, are caused by lateral variation of anisotropy but not by heterogeneity. 2) QL waves are utilized to determine the variation of uppermost mantle anisotropy of the Tibetan plateau. QL waves are identified from the seismograms of the selected paths recorded by the CAD station. The location of azimuth anisotropy gradient is estimated from the group velocities of Rayleigh wave, Love wave and QL wave. It suggests that south-north lateral variation of azimuthal anisotropy locates in Tanggula mountain, and east-west lateral variation in the north of Gandese mountain with 85°E longitude and near the Jinsha river fault with 85°E longitude.

利用重力与地形数据探讨我国大陆若干地区岩石圈有效弹性厚度

The lithosphere behaves as an elastic thin plate overlying a weak fluid. When loaded by topography, it deflects to compensate the topography and isostasy is achieved. The response of the plate is often characterized by the flexural rigidity, or equivalently, by the effective elastic thickness(EET). The relationships between gravity and topography have commonly been employed to investigate quantitively the isostatic compensation of the lithosphere. Cross-spectral techniques have been developed to estimate the admittance and coherence between gravity and topography. The observed admittance and coherence functions, when compared with theoretical admittance and coherence computed for various models and parameters, can provide an estimate of the effective elastic thickness. As for coherence, the wavelength at which the coherence drops from approaching unity at long wavelengths to value approaching zero at short wavelengths is a measure of the rigidity of the lithosphere. This research takes advantage of the high-resolution gravity and topography data in Erdos. Using the coherence technique, we have estimated the effective elastic thickness of this region. Subsurface loads are also considered in our calculation. When the admittance between topography and gravity is obtained, we can filter the topography to give an estimate of gravity anomaly. This would be very important when the gravity data is scarce. Several other regions of China have been selected to investigate the effective elastic thickness of lithosphere. We compare those result with lithosphere thickness obtained through seismological technique and heat flow of the region. We find the effective elastic thickness is always smaller than the seismogenic thickness. This is due to what the effective elastic thickness reflects is only the up elastic part of the lithosphere. And we also find there is some degree of correlation between effective elastic thickness and heat flow. This suggests EET is probably controlled by the thermal state of the lithosphere and correlates with their tectonic age. Thus the estimations of the effective elastic thickness of lithosphere can help to investigate geophysical features of active tectonics of continental lithosphere.

中强地震震源的破裂过程

With the large developments of the seismic sources theory, computing technologies and survey instruments, we can model and rebuild the rupture process of earthquakes more realistically. On which earthquake sources' properties and tectonic activities law are realized more clearly. The researches in this domain have been done in this paper as follows. Based on the generalized ray method, expressions for displacement on the surface of a half-space due to an arbitrary oriented shear and tensile dislocation are also obtained. Kinematically, fault-normal motion is equivalent to tensile faulting. There is some evidence that such motion occurs in many earthquakes. The expressions for static displacements on the surface of a layered half-space due to static point moment tensor source are given in terms of the generalized reflection and transmission coefficient matrix method. The validity and precision of the new method is illustrated by comparing the consistency of our results with the analytical solution given by Okada's code employing same point source and homogenous half-space model. The computed vertical ground displacement using the moment tensor solution of the Lanchang_Gengma earthquake displays considerable difference with that of a double couple component .The effect of a soft layer at the top of the homogenous half-space on a shallow normal-faulting earthquake is also analyzed. Our results show that more seismic information would be obtained utilizing seismic moment tensor source and layered half-space model. The rupture process of 1999 Chi-Chi, Taiwan, earthquake investigated by using co-seismic surface displacement GPS observations and far field P-wave records. In according to the tectonic analysis and distributions of aftershock, we introduce a three-segment bending fault planes into our model. Both elastic half-space models and layered-earth models to invert the distribution of co-seismic slip along the Chi-Chi earthquake rupture. The results indicate that the shear slip model can not fit horizontal and vertical co-seismic displacements together, unless we add the fault-normal motion (tensile component) in inversions. And then, the Chi Chi earthquake rupture process was obtained by inversion using the seismograms and GPS observations. Fault normal motions determined by inversion, concentrate on the shallow northern bending fault from Fengyuan to Shuangji where the surface earthquake ruptures reveal more complexity and the developed flexural slip folding structures than the other portions of the rupture zone For understanding the perturbation of surface displacements caused by near-surface complex structures, We have taken a numeric test to synthesize and inverse the surface displacements for a pop-up structure that is composed of a main thrust and a back thrust. Our result indicates that the pop-up structure, the typical shallow complex rupture that occurred in the northern bending fault zone form Fengyuan to Shuangji, can be modeled better by a thrust fault added negative tensile component than by a simple thrust fault. We interpret the negative tensile distributions, that concentrate on the shallow northern bending fault from Fengyuan to Shuangji, as a the synthetic effect including the complexities of property and geometry of rupture. The earthquake rupture process also reveal the more spatial and temporal complexities form Fenyuan to SHuangji. According to the three-components teleseismic records, the S-wave velocity structure beneath the 59 teleseismic stations of Taiwan obtained by using the transform function method and the SA techniques. The integrated results, the 3D crustal structure of Taiwan reveal that the thickest part of crustal local in the western Central Range. This conclusion is consistent with the result form the Bouguer gravity anomaly. The orogenic evolution of Taiwan is young period, and the developing foot of Central Range dose not in static balancing. The crustal of Taiwan stays in the course of dynamic equilibrium. The rupture process of 2003)2,24,Jiashi, Xinjiang earthquake was estimated by the finite fault model using far field broadband P wave records of CDSN and IRIS. The results indicate that the earthquake focal is north dip trust fault including some left-lateral strike slip. The focal mechanism of this earthquake is different form that of earthquakes occurred in 1997 and 1998, but similar to that of 1996, Artux, Xinjiang earthquake. We interpreted that the earthquake caused trust fault due to the Tarim basin pushing northward and orogeny of Tianshan mountain. In the end, give a brief of future research subject: Building the Real Time Distribute System for rupture process of Large Earthquakes Based on Internet.

利用宽频带台阵资料研究华北地区地壳及上地幔间断面结构

Intense tectonic renovation has occurred in the eastern continent of china since Mesozoic, as evidenced by the high heat flow, widespread magma extrusion and volcanic activities, and development of large sedimentary basins. To explain the cause and mechanism for the tectonic process in this period, some researchers have put forward various models, such as mantle plume, subduction of the Pacific slab, Yangtze Block-North China Block collision, etc. Their seismological evidence, however, is still scarce..During the period from 2000 to 2003, large temporary seismic arrays were established in North China by the Institute of the Geology and Geophysics, Chinese Academy of Sciences. Total 129 portable seismic stations were linearly emplaced across the western and eastern boundaries of the Bohai Bay Basin, and accumulated a large amount of high-quality data. Moreover, abundant data were also collected at the capital digital seismic network established in the ninth five-year period of national economic and social development. These provide an unprecedented opportunity for us to study the deep structure and associated geodynamic mechanism of lithospheric processes in North China using seismological techniques.Seismology is a kind of observation-based science. The development of seismic observations greatly promotes the improvement of seismologic theory and methodology. At the beginning of this thesis, I review the history of seismic observation progress, and present some routine processing techniques used in the array seismology. I also introduce two popular seismic imaging methods (receiver function method and seismic tomography).Receiver function method has been widely used to study the crustal and upper mantle structures, and many relevant research results have been published. In this thesis I elaborate the theory of this method, including the basic concept of receiver functions and the methodology for data pre-processing, stacking and migration. I also address some problems often encountered in practical applications of receiver function imaging.By using the teleseismic data collected at the temporary seismic arrays in North China, in particular, the traveltime information of P-to-S conversion and multiple reverberations of the Moho discontinuity, I obtain the distributions of the crustal thickness and the poisson ratio at the northwest boundary area of the Bohai Bay Basin and discuss the geological implications of the results.Through detailed intestigations on the crustal structural feature around the middle part of the Tanlu fault, considerable disparity in poisson ratios is found in the western and eastern sides of the Tanlu fault. Moreover, an obvious Moho offset is coincidently observed at the same surface location. A reasonable density model for the Tanlu fault area is also derived by simulating the observed gravity variations. Both receiver function study and gravity anomaly modeling suggest that the crustal difference between the western and eastern sides of the Tanlu fault is mainly resulted from their different compositions.With common conversion point imaging of receiver functions, I estimate the depths of the upper and lower boundaries of the mantle transition zone, i.e., the 410 and 660 km discontinuities, beneath most part of the North China continent The thickness of the transition zone (TTZ) in the study area is calculated by subtracting the depth of .410 km discontinuity from that of the 660km discontinuity. The resultant TTZ is 10-15 km larger in the east than in the west of the study area. Phase transitions at the 410 km and the 660 km discontinuities are known to have different Clapeyron slopes. Therefore, the TTZ is sensitive to the temperature changes in the transition zone. Previous studies have shown that the TTZ would be smaller in the mantle plume areas and become larger when the remnants of subducted slabs are present The hypothesis of mantle plume cannot give a reasonable interpretation to the observed TTZ beneath North China, Instead, the receiver function imaging results favor a dynamic model that correlates the thermal structure of the mantle transition zone and associated upper mantle dynamics of North China to the Pacific plate subduction process.

地幔对流理论及其在解释地球物理观测的应用

With the improving of mantle convection theory, the developing of computing method and increasing of the measurement data, we can numerically simulate more clearly about the effects on some geophysical observed phenomenons such as the global heat flow and global lithospheric stress field in the Earth's surface caused by mantle convection, which is the primary mechanism for the transport of heat from the Earth's deep interior to its surface and the underlying force mechanism of dynamics in the Earth.Chapter 1 reviews the historical background and present research state of mantle convection theory.In Chapter 2, the basic conception of thermal convection and the basic theory about mantle flow.The effects on generation and distribution of global lithospheric stres s field induced by mantle flow are the subject of Chapter 3. Mantle convection causes normal stress and tangential stresses at the bottom of the lithosphere, and then the sublithospheric stress field induces the lithospheric deformation as sixrface force and results in the stress field within the lithosphere. The simulation shows that the agreement between predictions and observations is good in most regions. Most of subduction zones and continental collisions are under compressive. While ocean ridges, such as the east Pacific ridge, the Atlantic ridge and the east African rift valley, are under tensile. And most of the hotspots preferentially occur in regions where calculated stress is tensile. The calculated directions of the most compressive principal horizontal stress are largely in accord with that of the observation except for some regions such as the NW-Pacifie subduction zone and Qinghai-Tibet Plateau, in which the directions of the most compressive principal horizontal stress are different. It shows that the mantel flow plays an important role in causing or affecting the large-scale stress field within the lithosphere.The global heat flow simulation based on a kinematic model of mantle convection is given in Chapter 4. Mantle convection velocities are calculated based on the internal loading theory at first, the velocity field is used as the input to solve the thermal problem. Results show that calculated depth derivatives of the near surface temperature are closely correlated to the observed surface heat flow pattern. Higher heat flow values around midocean ridge systems can be reproduced very well. The predicted average temperature as a function of function of depth reveals that there are two thermal boundary layers, one is close to the surface and another is close to the core-mantle boundary, the rest of the mantle is nearly isothermal. Although, in most of the mantle, advection dominates the heat transfer, the conductive heat transfer is still locally important in the boundary layers and plays an important role for the surface heat flow pattern. The existence of surface plates is responsible for the long wavelength surface heat flow pattern.In Chapter 5, the effects on present-day crustal movement in the China Mainland resulted from the mantle convection are introduced. Using a dynamic method, we present a quantitative model for the present-day crustal movement in China. We consider not only the effect of the India-Eurasia collision, the gravitational potential energy difference of the Tibet Plateau, but also the contribution of the shear traction on the bottom of the lithosphere induced by the global mantle convection. The comparison between our results and the velocity field obtained from the GPS observation shows that our model satisfactorily reproduces the general picture of crustal deformation in China. Numerical modeling results reveal that the stress field on the base of the lithosphere induced by the mantle flow is probably a considerable factor that causes the movement and deformation of the lithosphere in continental China with its eflfcet focuing on the Eastern China A numerical research on the small-scale convection with variable viscosity in the upper mantle is introduced in Chapter 6. Based on a two-dimensional model, small-scale convection in the mantle-lithosphere system with variable viscosity is researched by using of finite element method. Variation of viscosity in exponential form with temperature is considered in this paper The results show that if viscosity is strongly temperature-dependent, the upper part of the system does not take a share in the convection and a stagnant lid, which is identified as lithosphere, is formed on the top of system because of low temperature and high viscosity. The calculated surface heat flow, topography and gravity anomaly are associated well with the convection pattern, namely, the regions with high heat flow and uplift correspond to the upwelling flow, and vice versa.In Chapter 7, we give a brief of future research subject: The inversion of lateral density heterogeneity in the mantle by minimizing the viscous dissipation.

Arcabouço geofísico, isostasia e causas do magmatismo cenozóico da província Borborema e de sua margem continental (Nordeste do Brasil)

The Borborema Province (BP) is a geologic domain located in Northeastern Brazil. The BP is limited at the south by the São Francisco craton, at the west by the Parnaíba basin, and both at the north and east by coastal sedimentary basins. Nonetheless the BP surface geology is well known, several key aspects of its evolution are still open, notably: i)its tectonic compartmentalization established after the Brasiliano orogenesis, ii) the architecture of its cretaceous continental margin, iii) the elastic properties of its lithosphere, and iv) the causes of magmatism and uplifting which occurred in the Cenozoic. In this thesis, a regional coverage of geophysical data (elevation, gravity, magnetic, geoid height, and surface wave global tomography) were integrated with surface geologic information aiming to attain a better understanding of the above questions. In the Riacho do Pontal belt and in the western sector of the Sergipano belt, the neoproterozoic suture of the collision of the Sul domain of the BP with the Sanfranciscana plate (SFP) is correlated with an expressive dipolar gravity anomaly. The positive lobule of this anomaly is due to the BP lower continental crust uplifting whilst the negative lobule is due to the supracrustal nappes overthrusting the SFP. In the eastern sector of the Sergipano belt, this dipolar gravity anomaly does not exist. However the suture still can be identified at the southern sector of the Marancó complex arc, alongside of the Porto da Folha shear zone, where the SFP N-S geophysical alignments are truncated. The boundary associated to the collision of the Ceará domain of the BP with the West African craton is also correlated with a dipolar gravity anomaly. The positive lobule of this anomaly coincides with the Sobral-Pedro II shear zone whilst the negative lobule is associated with the Santa Quitéria magmatic arc. Judging by their geophysical signatures, the major BP internal boundaries are: i)the western sector of the Pernambuco shear zone and the eastern continuation of this shear zone as the Congo shear zone, ii) the Patos shear zone, and iii) the Jaguaribe shear zone and its southwestern continuation as the Tatajuba shear zone. These boundaries divide the BP in five tectonic domains in the geophysical criteria: Sul, Transversal, Rio Grande do Norte, Ceará, and Médio Coreaú. The Sul domain is characterized by geophysical signatures associated with the BP and SFP collision. The fact that Congo shear zone is now proposed as part of the Transversal domain boundary implies an important change in the original definition of this domain. The Rio Grande do Norte domain presents a highly magnetized crust resulted from the superposition of precambrian and phanerozoic events. The Ceará domain is divided by the Senador Pompeu shear zone in two subdomains: the eastern one corresponds to the Orós-Jaguaribe belt and the western one to the Ceará-Central subdomain. The latter subdomain exhibits a positive ENE-W SW gravity anomaly which was associated to a crustal discontinuity. This discontinuity would have acted as a rampart against to the N-S Brasiliano orogenic nappes. The Médio Coreaú domain also presents a dipolar gravity anomaly. Its positive lobule is due to granulitic rocks whereas the negative one is caused by supracrustal rocks. The boundary between Médio Coreaú and Ceará domains can be traced below the Parnaíba basin sediments by its geophysical signature. The joint analysis of free air anomalies, free air admittances, and effective elastic thickness estimates (Te) revealed that the Brazilian East and Equatorial continental margins have quite different elastic properties. In the first one 10 km < Te < 20 km whereas in the second one Te ≤ 10 km. The weakness of the Equatorial margin lithosphere was caused by the cenozoic magmatism. The BP continental margin presents segmentations; some of them have inheritance from precambrian structures and domains. The segmentations conform markedly with some sedimentary basin features which are below described from south to north. The limit between Sergipe and Alagoas subbasins coincides with the suture between BP and SFP. Te estimates indicates concordantly that in Sergipe subbasin Te is around 20 km while Alagoas subbasin has Te around 10 km, thus revealing that the lithosphere in the Sergipe subbasin has a greater rigidity than the lithosphere in the Alagoas subbasin. Additionally inside the crust beneath Sergipe subbasin occurs a very dense body (underplating or crustal heritage?) which is not present in the crust beneath Alagoas subbasin. The continental margin of the Pernambuco basin (15 < Te < 25 km) presents a very distinct free air edge effect displaying two anomalies. This fact indicates the existence in the Pernambuco plateau of a relatively thick crust. In the Paraíba basin the free air edge effect is quite uniform, Te ≈ 15 km, and the lower crust is abnormally dense probably due to its alteration by a magmatic underplating in the Cenozoic. The Potiguar basin segmentation in three parts was corroborated by the Te estimates: in the Potiguar rift Te ≅ 5 km, in the Aracati platform Te ≅ 25 km, and in the Touros platform Te ≅ 10 km. The observed weakness of the lithosphere in the Potiguar rift segment is due to the high heat flux while the relatively high strength of the lithosphere in the Touros platform may be due to the existence of an archaean crust. The Ceará basin, in the region of Mundaú and Icaraí subbasins, presents a quite uniform free air edge effect and Te ranges from 10 to 15 km. The analysis of the Bouguer admittance revealed that isostasy in BP can be explained with an isostatic model where combined surface and buried loadings are present. The estimated ratio of the buried loading relative to the surface loading is equal to 15. In addition, the lower crust in BP is abnormally dense. These affirmations are particularly adequate to the northern portion of BP where adherence of the observed data to the isostatic model is quite good. Using the same above described isostatic model to calculate the coherence function, it was obtained that a single Te estimate for the entire BP must be lower than 60 km; in addition, the BP north portion has Te around 20 km. Using the conventional elastic flexural model to isostasy, an inversion of crust thickness was performed. It was identified two regions in BP where the crust is thickened: one below the Borborema plateau (associated to an uplifting in the Cenozoic) and the other one in the Ceará domain beneath the Santa Quitéria magmatic arc (a residue associated to the Brasiliano orogenesis). On the other hand, along the Cariri-Potiguar trend, the crust is thinned due to an aborted rifting in the Cretaceous. Based on the interpretation of free air anomalies, it was inferred the existence of a large magmatism in the oceanic crust surrounding the BP, in contrast with the incipient magmatism in the continent as shown by surface geology. In BP a quite important positive geoid anomaly exists. This anomaly is spatially correlated with the Borborema plateau and the Macaú-Queimadas volcanic lineament. The integrated interpretation of geoid height anomaly data, global shear velocity model, and geologic data allow to propose that and Edge Driven Convection (EDC) may have caused the Cenozoic magmatism. The EDC is an instability that presumably occurs at the boundary between thick stable lithosphere and oceanic thin lithosphere. In the BP lithosphere, the EDC mechanism would have dragged the cold lithospheric mantle into the hot asthenospheric mantle thus causing a positive density contrast that would have generated the main component of the geoid height anomaly. In addition, the compatibility of the gravity data with the isostatic model, where combined surface and buried loadings are present, together with the temporal correlation between the Cenozoic magmatism and the Borborema plateau uplifting allow to propose that this uplifting would have been caused by the buoyancy effect of a crustal root generated by a magmatic underplating in the Cenozoic

Caracterização tectonoestratigráfica da porção adjacente ao epicentro do sismo São Vicente na bacia de Santos

Pós-graduação em Geologia Regional - IGCE

Inversão gravimétrica estável do relevo do embasamento e da variação da densidade com a profundidade em bacias sedimentares

O presente método postula uma variação hiperbólica para o contraste de densidade de uma bacia sedimentar em função da profundidade, e tem dois objetivos: (1) delinear o relevo do embasamento de uma bacia, conhecendo-se a anomalia gravimétrica, o contraste de densidade na superfície da bacia e o fator de decaimento do contraste de densidade com a profundidade; (2) estimar, além do relevo, o valor do contraste de densidade na superfície de uma bacia sedimentar e o fator de decaimento do contraste de densidade com a profundidade, sendo fornecida a anomalia gravimétrica e a profundidade do embasamento em alguns pontos da bacia. Nos dois casos o modelo interpretativo é um conjunto de prismas retangulares verticais justapostos, cujas espessuras, que são parâmetros a serem estimados, representam a profundidade da interface de separação entre os sedimentos e o embasamento. As soluções obtidas nos dois problemas acima formulados são estáveis devido à incorporação de informações adicionais sobre a suavidade do relevo estimado, e o conhecimento da profundidade do relevo do embasamento em alguns pontos, fornecido por furos de sondagem. O método foi testado em anomalias gravimétricas sintéticas produzidas pela simulação de bacias sedimentares com relevos suaves. Os resultados mostraram relevos com boa resolução e valores estimados do contraste de densidade na superfície da bacia e do fator de decaimento do contraste de densidade com a profundidade, próximos aos verdadeiros, indicando dessa maneira o potencial do método em interpretações gravimétricas de bacias sedimentares. O método foi aplicado à anomalia Bouguer da Bacia do Recôncavo, Brasil, delineando um relevo com um valor para a profundidade máxima de cerca de 6 km, semelhante ao estimado em interpretações sísmicas. As estimativas para o contraste de densidade na superfície da Bacia e o fator de decaimento com a profundidade foram -0,30 g/cm³ e 30 km, respectivamente, produzindo uma estimativa para a compactação máxima dos sedimentos da ordem de 4%.

Inversão gravimétrica estável do relevo da base e da variação da densidade com a profundidade em aterros sanitários

O presente trabalho apresenta um método que utiliza uma função hiperbólica para descrever o decaimento do contraste de densidade com a profundidade em aterros sanitários e lixões, e consiste de duas abordagens: (1) o mapeamento da base de um lixão ou de um aterro sanitário conhecendo-se a anomalia gravimétrica, o contraste de densidade na superfície e o fator de decaimento do contraste de densidade com a profundidade; (2) estimação do contraste de densidade na superfície e o fator de decaimento do contraste de densidade com a profundidade a partir do conhecimento da anomalia gravimétrica e do relevo da base do lixão ou do aterro sanitário; uma variante desta última abordagem utiliza os valores conhecidos de profundidade desses ambientes para gerar a anomalia ajustada e estimar o valor do contraste de densidade na superfície e o fator de decaimento do contraste com a profundidade através da minimização da norma Euclidiana do vetor de resíduos entre as observações e o ajuste. Em ambas abordagens o modelo interpretativo é representado por um conjunto de prismas retangulares justapostos, cujas espessuras são os parâmetros a serem determinados. As soluções encontradas através das duas abordagens são estáveis devido à incorporação de informação sobre a suavidade do relevo estimado. O método foi aplicado a dados sintéticos produzidos pela simulação de aterros sanitários e lixões com até 15 m de profundidades e de relevos suaves. Os resultados das interpretações gravimétricas foram consistentes e revelaram a eficácia do método tanto na abordagem (1) como na abordagem (2). O método também foi aplicado à anomalia Bouguer residual do aterro sanitário da Fazenda Thomas, Indiana, USA, indicando que o contraste de densidade do aterro pode ou ser constante ou apresentar variação máxima de 0,09 g/cm³.

Mapeamento de uma interface separando dois meios homogêneos através da reconstituição gravimétrica compacta: aplicação a dados do LEPLAC-IV

O problema do mapeamento de uma interface separando dois meios homogêneos tem sido tradicionalmente resolvido através da continuação para baixo da anomalia gravimétrica observada. Este procedimento requer a utilização de um filtro passa-baixa ou de um parâmetro de amortecimento, que tendem a diminuir a resolução do relevo estimado da interface. Além disso, o uso da continuação para baixo implica supor (desnecessariamente) que a interface é uma superfície harmônica. Desta forma, a utilização da continuação para baixo é restrita a interfaces que apresentam um relevo suave relativamente à sua profundidade média. As restrições impostas pela continuação para baixo do campo gravimétrico são reduzidas na técnica de inversão proposta para este estudo, cujo objetivo é mapear a interface crosta-manto baseada na incorporação de informações a priori sobre o mínimo momento de inércia da fonte causadora, em relação a um eixo de concentração de massa pré-estabelecido e coincidente com o topo da fonte anômala. Além da introdução de informações sobre o mínimo momento, foi incluída também a possibilidade de haver variação lateral e em profundidade de densidade em setores previamente estabelecidos, o que permite estender a aplicação desta técnica a situações geológicas mais complexas que envolvam a reconstituição de corpos justapostos, que sejam de diferentes naturezas, tais como aqueles presentes em zonas de transição crustal. O método de inversão apresentado foi avaliado em testes usando dados sintéticos e os resultados obtidos mostraram a eficiência desta técnica em recuperar corpos alongados horizontalmente, que apresentem como topo ou base, interfaces arbitrárias a serem mapeadas. Foi também constatada a eficácia do método em reconstituir corpos que comportem variação lateral de densidade que pudessem retratar situações em que se deseja investigar a natureza do embasamento em regiões de transição crustal. Com base nos resultados destes testes, a técnica foi então empregada na inversão gravimétrica de cinco perfis do LEPLAC IV que cruzam a região oceânica adjacente à margem continental sudeste brasileira. Os resultados desta aplicação permitiram inferir a natureza dos corpos que constituem o arcabouço estrutural da região onde encontram-se inseridas a Dorsal de São Paulo e a Zona de Fratura de Porto Alegre, assim como mapear a Moho subjacente.

Evolução tectônica e estratigráfica das bacias da margem continental do Uruguai

Pós-graduação em Geociências e Meio Ambiente - IGCE