双聚焦偏移速度估计与可分表示叠前弹性反演

In exploration seismology, the geologic target of oil and gas reservoir in complex medium request the high accuracy image of the structure and lithology of the medium. So the study of the prestack image and the elastic inversion of seismic wave in the complex medium come to the leading edge. The seismic response measured at the surface carries two fundamental pieces of information: the propagation effects of the medium and the reflections from the different layer boundaries in the medium. The propagation represent the low-wavenumber component of the medium, it is so-called the trend or macro layering, whereas the reflections represent the high-wavenumber component of the medium, it is called the detailed or fine layering. The result of migration velocity analysis is the resolution of the low-wavenumber component of the medium, but the prestack elastic inversion provided the resolution of the high-wavvenumber component the medium. In the dissertation, the two aspects about the migration velocity estimation and the elastic inversion have been studied.Firstly, any migration velocity analysis methods must include two basic elements: the criterion that tell us how to know whether the model parameters are correct and the updating that tell us how to update the model parameters when they are incorrect, which are effected on the properties and efficiency of the velocity estimation method. In the dissertation, a migration velocity analysis method based on the CFP technology has been presented in which the strategy of the top-down layer stripping approach are adapted to avoid the difficult of the selecting reduce .The proposed method has a advantage that the travel time errors obtained from the DTS panel are defined directly in time which is the difference with the method based on common image gather in which the residual curvature measured in depth should be converted to travel time errors.In the proposed migration velocity analysis method, the four aspects have been improved as follow:? The new parameterization of velocity model is provided in which the boundaries of layers are interpolated with the cubic spline of the control location and the velocity with a layer may change along with lateral position but the value is calculated as a segmented linear function of the velocity of the lateral control points. The proposed parameterization is suitable to updating procedure.? The analytical formulas to represent the travel time errors and the model parameters updates in the t-p domain are derived under local lateral homogeneous. The velocity estimations are iteratively computed as parametric inversion. The zero differential time shift in the DTS panel for each layer show the convergence of the velocity estimation.? The method of building initial model using the priori information is provided to improve the efficiency of velocity analysis. In the proposed method, Picking interesting events in the stacked section to define the boundaries of the layers and the results of conventional velocity analysis are used to define the velocity value of the layers? An interactive integrate software environment with the migration velocity analysis and prestack migration is built.The proposed method is firstly used to the synthetic data. The results of velocity estimation show both properties and efficiency of the velocity estimation are very good.The proposed method is also used to the field data which is the marine data set. In this example, the prestack and poststack depth migration of the data are completed using the different velocity models built with different method. The comparison between them shows that the model from the proposed method is better and improves obviously the quality of migration.In terms of the theoretical method of expressing a multi-variable function by products of single-variable functions which is suggested by Song Jian (2001), the separable expression of one-way wave operator has been studied. A optimization approximation with separable expression of the one-way wave operator is presented which easily deal with the lateral change of velocity in space and wave number domain respectively and has good approach accuracy. A new prestack depth migration algorithm based on the optimization approximation separable expression is developed and used to testing the results of velocity estimation.Secondly, according to the theory of the seismic wave reflection and transmission, the change of the amplitude via the incident angle is related to the elasticity of medium in the subsurface two-side. In the conventional inversion with poststack datum, only the information of the reflection operator at the zero incident angles can be used. If the more robust resolutions are requested, the amplitudes of all incident angles should be used.A natural separable expression of the reflection/transmission operator is represented, which is the sum of the products of two group functions. One group function vary with phase space whereas other group function is related to elastic parameters of the medium and geological structure.By employing the natural separable expression of the reflection/transmission operator, the method of seismic wave modeling with the one-way wave equation is developed to model the primary reflected waves, it is adapt to a certain extent heterogeneous media and confirms the accuracy of AVA of the reflections when the incident angle is less than 45'. The computational efficiency of the scheme is greatly high.The natural separable expression of the reflection/transmission operator is also used to construct prestack elastic inversion algorithm. Being different from the AVO analysis and inversion in which the angle gathers formed during the prstack migration are used, the proposed algorithm construct a linear equations during the prestack migration by the separable expression of the reflection/transmission operator. The unknowns of the linear equations are related to the elasticity of the medium, so the resolutions of them provided the elastic information of the medium.The proposed method of inversion is the same as AVO inversion in , the difference between them is only the method processing the amplitude via the incident angle and computational domain.

三峡库区滑坡的时空分布、成因及其预报模式

Landslides are widely distributed along the main stream banks of the Three Gorges Reservoir area. Especially with the acceleration of the human economic activities in the recent 30 years, the occurrence of landslide hazards in the local area trends to be more serious. Because of the special geological, topographic and climatic conditions of the Three Gorges areas, many Paleo-landslides are found along the gentle slope terrain of the population relocation sites. Under the natural condition, the Paleo-landslides usually keep stable. The Paleo-landslides might revive while they are influenced under the strong rainfall, water storage and migration engineering disturbance. Therefore, the prediction and prevention of landslide hazards have become the important problem involving with the safety of migration engineering of the Three Gorges Reservoir area.The past research on the landslides of the Three Gorges area is mainly concentrated on the stability analysis of individual landslide, and importance was little attached to the knowledge on the geological environment background of the formation of regional landslides. So, the relationship between distribution and evolution of landslides and globe dynamic processes was very scarce in the past research. With further study, it becomes difficult to explain the reasons for the magnitude and frequency of major geological hazards in terms of single endogenic or exogenic processes. It is possible to resolve the causes of major landslides in the Three Gorges area through the systematic research of regional tectonics and river evolution history.In present paper, based on the view of coupling of earth's endogenic and exogenic processes, the author researches the temporal and spacial distribution and formation evolution of major landslides(Volume^lOOX 104m3) in the Three Gorges Reservoir area through integration of first-hand sources statistics, .geological evolution history, isotope dating and numerical simulation method etc. And considering the main formation factors of landslides (topography, geology and rainfall condition), the author discusses the occurrence probability and prediction model of rainfall induced landslides.The distribution and magnitude of Paleo-landslides in the Three Gorges area is mainly controlled by lithology, geological structure, bank slope shape and geostress field etc. The major Paleo-landslides are concentrated on the periods 2.7-15.0 X 104aB.R, which conrresponds to the warm and wettest Paleoclimate stages. In the same time, the Three Gorges area experiences with the quickest crust uplift phase since 15.0X 104aB.P. It is indicated that the dynamic factor of polyphase major Paleo-landslides is the coupling processes of neotectonic movement and Quaternary climate changes. Based on the numerical simulation results of the formation evolution of Baota landslide, the quick crust uplift makes the deep river incision and the geostress relief causes the rock body of banks flexible. Under the strong rainfall condition, the pore-water pressure resulted from rain penetration and high flood level can have the shear strength of weak structural plane decrease to a great degree. Therefore, the bank slope is easy to slide at the slope bottom where shear stress concentrates. Finally, it forms the composite draught-traction type landslide of dip stratified rocks.The susceptibility idea for the rainfall induced landslide is put forward in this paper and the degree of susceptibility is graded in terms of the topography and geological conditions of landslides. Base on the integration with geological environment factors and rainfall condition, the author gives a new probabilistic prediction model for rainfall induced landslides. As an example from Chongqing City of the Three Gorges area, selecting the 5 factors of topography, lithology combination, slope shape, rock structure and hydrogeology and 21 kinds of status as prediction variables, the susceptibility zonation is carried out by information methods. The prediction criterion of landslides is established by two factors: the maximum 24 hour rainfall and the antecedent effective precipitation of 15 days. The new prediction model is possible to actualize the real-time regional landslide prediction and improve accuracy of landslide forecast.

Assessing spatio-temporal patterns of groundwater salinity in small coral islands in the Western Indian Ocean

We investigated groundwater salinity as a key element in both the short and long-term evolution of the island of Grande Glorieuse. Firstly, we demonstrated that its evolution involved the integration of the whole range of variables forcing climate change. Piezometric surveys designed to sample the salinity of the subsoil waters of Grande Glorieuse could therefore provide an objective indicator of the environment’s evolution. Then, based on information from geoelectrical investigations, we proved that the spatial distribution of salinity is strongly dependent on the geological structure of the island. Structural heterogeneities can influence vulnerability of the island environment to salinization of the freshwater lens. Thus, characterization and monitoring of the freshwater lens will provide a reliable means of observing and managing anticipated climate changes on small islands. [Join J.-L., Banton O., Comte J.-C., Leze J., Massin F., Nicolini E. (2011), Assessing spatio-temporal patterns of groundwater salinity in small coral islands in the Western Indian Ocean, Western Indian Ocean Journal of Marine Science, 10(1), 1-12]

Local materials for building houses: laterite valorization in Africa

This paper presents the preliminary results of geological and geomechanical studies on the laterite stone exploited at Dano quarry in Burkina Faso. The field work described the geological structure of quarry sites and their environment to determine the rocks alteration and the links between the bedrock and lateritic material. Physic-mechanical properties have been studied for assessing the potentiality of this material for lightweight housing, to be completed with thermal and environmental considerations. Some social and economic evaluations are in progress in order to foster its utilization under local conditions.

Local materials for building houses: Laterite valorization in Africa

This paper presents the preliminary results of geological and geomechanical studies on the laterite stone exploited at Dano quarry in Burkina Faso. The field work described the geological structure of quarry sites and their environment to determine the rocks alteration and the links between the bedrock and lateritic material. Physic-mechanical properties have been studied for assessing the potentiality of this material for lightweight housing, to be completed with thermal and environmental considerations. Some social and economic evaluations are in progress in order to foster its utilization under local conditions. © (2014) Trans Tech Publications, Switzerland.

B.N. Peach letter, 1918.

Ben N. Peach (1842-1926) was a well-known geologist whose work focused on the geological structure of Scotland, and in particular the Northwest Scottish Highlands and Southern Uplands. He formed a close working relationship with John Horne and the two colloborated on many works, most notably two memoirs of the Geological Survey of Great Britain, The Silurian Rocks of Britain (1899) and The Geological Structure of the North-West Highlands of Scotland (1907).

Influência de estruturas geológicas bidimensionais no campo geoeletromagnético na presença do eletrojato equatorial

A Terra atua como um grande magneto esférico, cujo campo assemelha-se àquele gerado por um dipolo magnético. Este campo apresenta mudanças de intensidade que variam com a localização e a hora local. A parte principal do campo geomagnético se origina no interior da Terra através de processos eletromagnéticos. Extensivos estudos mostraram ainda que existem contribuições de origem externa ao planeta, principalmente de origem solar. Dentre estas fontes há anomalias do campo magnético que surgem a partir de um aumento diurno da corrente elétrica em uma estreita faixa da ionosfera, de direção leste-oeste, centrada no equador magnético e denominada Eletrojato Equatorial (EEJ). Ocasionalmente estas correntes podem apresentar reversões de fluxo, sendo denominadas Contra-Eletrojato (CEJ). Vários autores têm estudado os efeitos do EEJ e CEJ sobre as observações geoeletromagnéticas. Eles estão interessados no efeito combinado do EEJ e estruturas geológicas condutivas 1-D e 2-D. Nestes trabalhos a estrutura 2-D sempre se apresentava paralela ao eletrojato, o que é uma hipótese bastante restritiva ao se modelar ambientes geológicos mais realistas, em que corpos bidimensionais podem ter qualquer strike em relação ao EEJ. Neste trabalho apresentamos a solução deste problema sem esta restrição. Assim, mostramos os campos geoeletromagnéticos devidos a estruturas bidimensionais que possuam strike oblíquo em relação ao EEJ, através de perfis dos campos elétrico e magnéticos calculados na superfície e formando direção arbitrária à heterogeneidade condutiva 2-D. Com esta resposta avaliamos ainda qual a influência que estruturas bidimensionais exercem sobre a resposta magnetotelúrica, sob influência do Eletrojato Equatorial. Durante o desenvolvimento deste trabalho, utilizamos o método de elementos finitos, tendo por fonte eletromagnética o EEJ e o CEJ, que por sua vez foram representados por uma combinação de distribuições gaussianas de densidade de corrente. Estas fontes foram decompostas nas direções paralela e perpendicular à estrutura 2-D, resultando nos modos de propagação TE₁ e TE₂ e TM acoplados, respectivamente. Resolvemos o modo acoplado aplicando uma Transformada de Fourier nas equações de Maxwell e uma Transformada Inversa de Fourier na solução encontrada. De acordo com os experimentos numéricos realizados em um modelo interpretativo da Anomalia Condutiva da Bacia do Parnaíba, formado por uma enorme estrutura de 3000 ohm-m dentro de um corpo externo condutivo (1 ohm-m), concluímos que a presença do CEJ causa uma inversão na anomalia, se compararmos com o resultado do EEJ. Concluímos também que para as frequências mais altas as componentes do campo elétrico apresentam menor influência da parte interna do corpo 2-D do que da parte externa. Já para frequências mais baixas este comportamento se observa com as componentes do campo magnético. Com relação à frequência, vimos os efeitos do “skin-depth”, principalmente nas respostas magnéticas. Além disso, quando a estrutura 2-D está paralela ao eletrojato, o campo elétrico é insensível à estrutura interna do modelo para todos os valores de frequência utilizados. Com respeito ao ângulo θ_h entre a heterogeneidade e a fonte, vimos que o modo TM se manifesta naturalmente quando θ_h é diferente de 0°. Neste caso, o modo TE é composto por uma parte devido à componente da fonte paralela à heterogeneidade e a outra devido à componente da fonte perpendicular, que é acoplada ao modo TM. Assim, os campos calculados têm relação direta com o valor de θ_h. Analisando a influência do ângulo entre a direção do perfil dos campos e o strike da heterogeneidade verificamos que, à medida que θ_h se aproxima de 90°, os campos primários tornam-se variáveis para valores de θ_p diferentes de 90°. Estas variações causam uma assimetria na anomalia e dão uma idéia da inclinação da direção do perfil em relação aos corpos. Finalmente, concluímos que uma das influências que a distância entre o centro do EEJ e o centro da estrutura 2-D, causa sobre as componentes dos campos está relacionado às correntes reversas do EEJ e CEJ, pois a 500 km do centro da fonte estas correntes têm máxima intensidade. No entanto, com o aumento da distância, as anomalias diminuem de intensidade. Nas sondagens MT, nós também usamos o EEJ e o CEJ como fonte primária e comparamos nossos resultados com a resposta da onda plana. Deste modo observamos que as componentes do campo geoeletromagnético, usadas para calcular a impedância, têm influência do fator de acoplamento entre os modos TE₂ e TM. Além disso, esta influência se torna maior em meios resistivos e nas frequências mais baixas. No entanto, o fator de acoplamento não afeta os dados magnetotelúricos em frequências maiores de 10^-2 Hz. Para frequências da ordem de 10^-4 Hz os dados MT apresentam duas fontes de perturbação: a primeira e mais evidente é devido à presença fonte 2-D (EEJ e CEJ), que viola a hipótese da onda plana no método MT; e a segunda é causada pelo acoplamento entre os modos TE₂ e TM, pois quando a estrutura bidimensional está obliqua à fonte 2-D temos correntes elétricas adicionais ao longo da heterogeneidade. Concluimos assim, que o strike de uma grande estrutura condutiva bidimensional relativamente à direção do EEJ ou CEJ tem de fato influência sobre o campo geomagnético. Por outro lado, para estudos magnetotelúricos rasos (frequências maiores de 10^-3 Hz) o efeito do ângulo entre a estrutura geológica 2-D e a direção do EEJ não é tão importante. Contudo, em estudos de litosfera frequências menores de 10^-3 Hz) o acoplamento entre os modos TE₂ e TM não pode ser ignorado.

Avaliação da influência do eletrojato equatorial na interpretação de dados magnetotelúrico bidimensionais

O campo magnetotelúrico em regiões equatoriais viola a condição de ondas planas por causa de uma fonte fortemente concentrada na direção E-W na ionosfera, denominada eletrojato equatorial. No presente trabalho, procurou-se analisar a resposta magnetotelúrica de fontes que simulam o efeito do eletrojato equatorial. Foram considerados dois tipos de fontes para simular o eletrojato: uma linha infinita de corrente e uma distribuição gaussiana de densidade de corrente em relação a uma das coordenadas horizontais. A resistividade aparente foi obtida através da relação de Cagniard e comparada com os resultados de ondas planas. É mostrada também a comparação entre a fase da impedância na superfície, para os três tipos de fontes (ondas planas, eletrojato gaussiano e linha de corrente). O problema de meios com heterogeneidades laterais foi resolvido em termos de campos secundários, sendo as equações diferenciais solucionadas através da técnica de elementos finitos bidimensionais. Os resultados mostram que o eletrojato tem pouca influência nas respostas (resistividade aparente e fase) de estruturas geológicas rasas. Entretanto, a influência pode ser considerável nas estruturas profundas (maior que 5000 m), principalmente se suas resistividades são altas (maior que 100 Ω.m). Portanto, a influência do eletrojato equatorial deve ser considerada na interpretação de dados magnetotelúricos de bacias sedimentares profundas ou no estudo da crosta terrestre.

Interpretação quantitativa de anomalias gravimétricas ar-livre da margem continental norte brasileira, setor nordeste

Anomalias gravimétricas ar-livre de perfis perpendiculares a margem continental do tipo passiva apresentam uma configuração padrão. Esta configuração é, satisfatoriamente, explicada por um modelo geofísico formado por uma distribuição de descontinuidades horizontais bidimensionais. Um processo automático de busca aleatória é proposto para a interpretação quantitativa dos dados. Através do método de poliedros flexíves (Simplex), os parâmetros principais do modelo - o contraste de densidade, a profundidade, o rejeito e a localização de cada descontinuidade, puderam ser encontrados, admitindo uma relação número de pontos/número de parâmetros, a determinar, conveniente. Sobre a região do talude, as anomalias ar-livre da margem continental podem ser explicadas por uma única descontinuidade horizontal (degrau simples); e tendo que a resposta dos dados gravimétricos no domínio do número de onda contém informações sobre esta anomalia, foi proposto um procedimento gráfico iterativo para a análise espectral deste sinal. Aplicando a transformada de Fourier é possível determinar a profundidade e o rejeito da descontinuidade, e conhecendo estes parâmetros a densidade é calculada unicamente. O objetivo básico do uso destes procedimentos seria combinar os dois métodos de interpretação nos domínios do espaço e do número de onda, com a finalidade de obter soluções vinculadas mais plausíveis quanto ao contexto geológico esperado para a área estudada. Os dois procedimentos de interpretação foram aplicados nas anomalias gravimétricas ar-livre da margem continental norte brasileira, setor nordeste, abrangendo os estados do Maranhão ao Rio Grande do Norte. As respectivas capacidade de resolução de cada procedimento foram então analisadas. Demonstrou-se que a inversão realizada diretamente no domínio do espaço é mais favorável na interpretação das anomalias ar-livre, embora o tratamento espectral seja relativamente mais simples.

A structural and metamorphic study of the southern Menderes Massif (Western Turkey)

P-T conditions, paragenetic studies and the relation between mineral growth, deformation and - when possible- isograd minerals have been used to describe the type of metamorphism involved within lower units of the southern Menderes Massif of the Anatolide Belt in western Turkey. The study areas mainly consist of Proterozoic orthogneiss and surrounding schists of presumed Paleozoic age. Both units are seen as nappes in the southern study area, the Çine and the Selimiye nappe, on the whole corresponding to Proterozoic orthogneiss and surrounding schists, respectively. The Çine and Selimiye nappes are part of a complex geological structure within the core series of the Menderes Massif. Their emplacement under lower greenschist facies conditions, would result from closure of the northern Neo-Thethys branch during the Eocene. These two nappes are separated by a major tectonic structure, the Selimiye shear zone, which records top-to-the-S shearing under greenschist facies conditions. Amphibolite to upper amphibolite facies metamorphism is widely developed within the metasedimentary rocks of the Çine nappe whereas no metamorphism exceeding lower amphibolite facies has been observed in the Selimiye nappe. In the southern margin of the Çine Massif, around Selimiye and Millas villages, detailed sampling has been undertaken in order to map mineral isograds within the Selimiye nappe and to specify P-T conditions in this area. The data collected in this area reveals a global prograde normal erosion field gradient from south to north and toward the orthogneiss. The mineralogical parageneses and P-T estimates are correlated with Barrovian-type metamorphism. A jump of P-T conditions across the Selimiye shear zone has been identified and estimated c. 2 kbar and 100 °C which evidences the presence of amphibolite facies metasedimentary rocks near the orthogneiss. Metasedimentary rocks from the overlying Selimiye nappe have maximum P-T conditions of c. 4-5 kbar and c. 525 °C near the base of the nappe. Metasedimentary rocks from the Çine nappe underneath the Selimiye shear zone record maximum P-T conditions of about 7 kbar and >550 °C. Kinematic indicators in both nappes consistently show a top-S shear sense. Metamorphic grade in the Selimiye nappe decreases structurally upwards as indicated by mineral isograds defining the garnet-chlorite zone at the base, the chloritoid-biotite zone and the biotite-chlorite zone at the top of the nappe. The mineral isograds in the Selimiye nappe run parallel to the regional SR foliation. 40Ar/39Ar mica ages indicate an Eocene age of metamorphism in the Selimiye nappe and underneath the Çine nappe in this area. Metasedimentary rocks of the Çine nappe 20-30 km north of the Selimiye shear zone record maximum P-T conditions of 8-11 kbar and 600-650 °C. Kinematic indicators show mainly top-N shear sense associated with prograde amphibolite facies metamorphism. An age of about 550 Ma could be indicated for amphibolite facies metamorphism and associated top-N shear in the orthogneiss and metasedimentary rocks of the Çine nappe. However, there is no evidence for polymetamorphism in the 6 metasedimentary rocks of the Çine nappe, making tectonic interpretations about late Neoproterozoic to Cambrian and Tertiary metamorphic events speculative. In the western margin of the Çine Massif metamorphic mineral parageneses and pressure– temperature conditions lead to similar conclusion regarding the erosion field gradient, prograde normal toward the orthogneiss. The contact between orthogneiss and surrounding metasedimentary rocks is mylonitic and syn-metamorphism. P-T estimates are those already observed within the Selimiye nappe and correlated with lower amphibolite facies parageneses. Finally additional data in the eastern part and a general paragenetic study within the Menderes Massif lower units, the Çine and the Selimiye nappes, strongly suggest a single Barrovian-type metamorphism predating Eocene emplacement of the high pressure–low temperature Lycean and Cycladic blueschist nappes. Metamorphic mineral parageneses and pressure–temperature conditions do not support the recently proposed model of high pressure–low temperature metamorphic overprinting, which implies burial of the lower units of the Menderes Massif up to depth of 30 km, as a result of closure of the Neo-Tethys. According to the geochronological problem outlined during this thesis, there are two possible schemes: either Barrovian-type metamorphism is Proterozoic in age and part of the sediments from Selimiye nappe (lower amphibolite facies) has to be proterozoic of age too, or Barrovian-type metamorphism in Eocene of age. In the first case the structure observed now in the core series would correspond to simple exhumation of Proterozoic basement. In the latter case a possible correlation with closure of Neo-Tethys (sensu stricto, southern branch) is envisaged.