Artificial receptors for the extraction of nucleoside metabolite 7-methylguanosine from aqueous media made by molecular imprinting

A series of imprinted polymers targeting nucleoside metabolites, prepared using a template analogue approach, are presented. These were prepared following selection of the optimum functional monomer by solution association studies using 1H-NMR titrations whereby methacrylic acid was shown to be the strongest receptor with and affinity constant of 621 ± 51 L mol-1 vs. 110 ± 16 L mol-1 for acrylamide. The best performing polymers were prepared using methanol as porogenic co-solvent and although average binding site affinities were marginally reduced, 2.3×104 L mol-1 vs. 2.7×104 L mol-1 measured for a polymer prepared in acetonitrile, these polymers contained the highest number of binding sites, 5.27 μmol g-1¬¬ vs. 1.64 μmol g-1, while they also exhibited enhanced selectivity for methylated guanosine derivatives. When applied as sorbents in the extraction of nucleoside derivative cancer biomarkers from synthetic urine samples, significant sample clean-up and recoveries of up to 90% for 7-methylguanosine were achieved.

Tetrabutylammonium methacrylate as a novel receptor for selective extraction of sulphonylurea drugs from biological fluids using molecular imprinting

Glibenclamide (GLIB), an oral antidiabetic medication of the sulphonylurea drugs family, was stoichiometrically imprinted using tetrabutylammonium methacrylate as the functional monomer, for the first time in molecular imprinting, and utilising the sulphonylurea affinity for carboxylate anions. Solution association between the drug and the novel functional monomer was studied by 1H-NMR titrations, whereby evidence of sulphonylurea deprotonation followed by the formation of “narcissistic” GLIB dimers was found when tested in CDCl3, while an affinity constant in excess of 105 L mol-1 was measured in DMSO-d6. Detailed analysis of GLIB binding on the subsequently prepared imprinted and non-imprinted polymers confirmed deactivation of binding sites by exchange of a proton between GLIB and methacrylate, followed by extraction of the tetrabutylammonium counterion from the polymer matrix, resulting in overall reduced binding capacities and affinities by the imprinted material under equilibrium conditions. An optimised MI-SPE protocol, which included a binding site re-activation step, was developed for the extraction of GLIB from blood serum, whereby recoveries of up to 92.4% were obtained with exceptional sample clean-up.

Stoichiometric Molecularly Imprinted Polymers for the Recognition of Anti-Cancer Pro-drug Tegafur

Molecularly Imprinted Polymers (MIPs) targeting tegafur, an anti-cancer 5-fluorouracil pro-drug, have been prepared by stoichiometric imprinting using 2,6-bis(acrylamido)pyridine (BAAPy) as the functional monomer. Solution association between tegafur and BAAPy was studied by 1H NMR titration, which confirmed the formation of 1:1 complexes with an affinity constant of 574±15 M-1 ¬in CDCl3. Evaluation of the synthesised materials by HPLC and equilibrium rebinding experiments revealed high selectivity of the imprinted polymer for the pro-drug versus 5-fluorouracil and other competing analytes, with maximum imprinting factors of 25.3 and a binding capacity of 45.1 μmol g-1. The synthesised imprinted polymer was employed in solid-phase extraction of the pro-drug using an optimised protocol that included a simple wash with the porogen used in the preparation of the material. Tegafur recoveries of up to 96% were achieved from aqueous samples and 92% from urine samples spiked with the template and three competing analytes. The results demonstrate the potential of the prepared polymers in the pre-concentration of tegafur from biological samples, which could be an invaluable tool in the monitoring of patient compliance and drug uptake and excretion.

Novas dispersões aquosas com morfologia controlada para revestimentos

O objetivo desta dissertação foi o desenvolvimento de dispersões poliméricas acrílicas, passíveis de serem usadas como ligantes em esmaltes aquosos que sejam capazes de conferir características especiais como elevada resistência ao empilhamento e à nódoa, assim como reduzir o impacto no ambiente quer através da utilização de matérias-primas de fontes renováveis, quer pela substituição de esmaltes de base solvente por esmaltes de base aquosa. Depois de uma introdução em que se contextualiza o conhecimento e as práticas nas áreas de polimerização em emulsão e revestimentos decorativos, são descritos e discutidos os resultados das várias etapas de desenvolvimento efetuadas ao longo do qual foram exploradas diferentes vias: - Funcionalização de polímeros acrílicos procurando melhorar as propriedades de superfície através da introdução de monómeros com grupos funcionais amina, epóxido e acetoacetoxilo; - Formulação de dispersões poliméricas com partículas de morfologia heterogénea, otimizando-se as suas propriedades de superfície em função da variação da composição monomérica das diferentes fases, da partição entre as duas fases poliméricas e diferentes níveis de monómero funcional. Complementaram-se os resultados com seleções afinadas baseadas em ensaios delineados através de planeamento de experiências. - Modificação dos produtos obtidos para melhoria de propriedades de resistência à nódoa, através da adição de aditivos específicos; - Teste de emulsionantes com origem em fontes renováveis quer aniónicos, quer não-iónicos. Todas as dispersões aquosas foram caracterizadas de acordo com as suas características mais relevantes entre as quais a temperatura mínima de formação de filme, o tamanho médio de partícula e a formação de grumos. As formulações mais promissoras foram também caracterizadas por 1H - NMR, FTIR, DSC, STEM e AFM). Seguidamente com essas dispersões foram preparados esmaltes com as dispersões aquosas mais promissoras que foram caracterizados exaustivamente em termos de propriedades de relevo para a aplicação decorativa em madeira. Os objetivos principais do trabalho foram atingidos, tendo sido desenvolvido um produto com morfologia heterogénea que apresenta elevada resistência ao empilhamento e propriedades antinódoa aceitáveis capaz de substituir os esmaltes de base solvente. A sua produção foi validada através do fabrico industrial (scale-up) e introdução no mercado. Relativamente à utilização de matérias-primas de fontes renováveis, esta carece ainda de otimizações futuras.

Synthesis and characterization of cross-linked molecularly imprinted polyacrylamide for the extraction/preconcentration of glyphosate and aminomethylphosphonic acid from water samples

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Performance of a New One-step Multi-mode Adhesive on Etched vs Non-etched Enamel on Bond Strength and Interfacial Morphology

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of long-term storage on nanomechanical and morphological properties of dentin-adhesive interfaces

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Magnetically separable polymer (Mag-MIP) for selective analysis of biotin in food samples

This work presents an efficient method for the preparation of magnetic nanoparticles modified with molecularly imprinted polymers (Mag-MIP) through core-shell method for the determination of biotin in milk food samples. The functional monomer acrylic acid was selected from molecular modeling, EGDMA was used as cross-linking monomer and AIBN as radical initiator. The Mag-MIP and Mag-NIP were characterized by FTIR, magnetic hysteresis, XRD, SEM and N2-sorption measurements. The capacity of Mag-MIP for biotin adsorption, its kinetics and selectivity were studied in detail. The adsorption data was well described by Freundlich isotherm model with adsorption equilibrium constant (KF) of 1.46 mL g(-1). The selectivity experiments revealed that prepared Mag-MIP had higher selectivity toward biotin compared to other molecules with different chemical structure. The material was successfully applied for the determination of biotin in diverse milk samples using HPLC for quantification of the analyte, obtaining the mean value of 87.4% recovery.

Detecção e quantificação de corantes de importância ambiental empregando sensores químicos baseados em fibras ópticas e polímeros molecularmente impressos

Pós-graduação em Química - IQ

Light-sensitive polymeric nanoparticles based on photo-cleavable chromophores

Der Fokus dieser Arbeit liegt in dem Design, der Synthese und der Charakterisierung neuartiger photosensitiver Mikrogele und Nanopartikel als potentielle Materialien für Beladungs- und Freisetzungsanwendungen. Zur Realisierung dieses Konzepts wurden verschiedene Ansätze untersucht.Es wurden neuartige niedermolekulare lichtspaltbare Vernetzermoleküle auf der Basis von o-Nitrobenzylderivaten synthetisiert, charakterisiert und zur Herstellung von photosensitiven PMMA und PHEMA Mikrogelen verwendet. Diese sind unter Bestrahlung in organischen Lösungsmitteln quellbar und zersetzbar. Durch die Einführung anionischer MAA Gruppen in solche PHEMA Mikrogele wurde dieses Konzept auf doppelt stimuliresponsive p(HEMA-co-MAA) Mikrogele erweitert. Hierbei wurde ein pH-abhängiges Quellbarkeitsprofil mit der lichtinduzierten Netzwerkspaltung in wässrigen Medien kombiniert. Diese duale Sensitivität zu zwei zueinander orthogonalen Reizen stellt ein vielversprechendes Konzept zur Kombination einer pH-abhängigen Beladung mit einer lichtinduzierten Freisetzung von funktionellen Substanzen dar. Desweiteren wurden PAAm Mikrogele entwickelt, welche sowohl eine Sensitivität gegenüber Enzymen als auch Licht aufweisen. Dieses Verhalten wurde durch die Verwendung von (meth-)acrylatfunktionalisierten Dextranen als polymere Vernetzungsmoleküle erreicht. Das entsprechende stimuliresponsive Profil basiert auf der enzymatischen Zersetzbarkeit der Polysaccharid-Hauptkette und der Anbindung der polymerisierbaren Vinyleinheiten an diese über photospaltbare Gruppen. Die gute Wasserlöslichkeit der Vernetzermoleküle stellt einen vielversprechenden Ansatz zur Beladung solcher Mikrogele mit funktionellen hydrophilen Substanzen bereits während der Partikelsynthese dar. Ein weiteres Konzept zur Beladung von Mikrogelen basiert auf der Verwendung von photolabilen Wirkstoff-Mikrogel Konjugaten. In einem ersten Schritt zur Realisierung solch eines Ansatzes wurde ein neuartiges Monomer entwickelt. Hierbei wurde Doxorubicin über eine lichtspaltbare Gruppe an eine polymerisierbare Methacrylatgruppe angebunden. Für die Freisetzung hydrophober Substanzen in wässrigen Medien wurden polymere Photolack-Nanopartikel entwickelt, welche sich unter Bestrahlung in Wasser zersetzen. Die lichtinduzierte Änderung der Hydrophobizität des Polymers ermöglichte die Freisetzung von Nilrot durch das Auflösen der partikulären Struktur. Ein interessanter Ansatz zur Verhinderung einer unkontrollierten Freisetzung funktioneller Substanzen aus Mikrogelen ist die Einführung einer stimuliresponsiven Schale. In diesem Kontext wurden Untersuchungen zur Bildung von nicht-stimulisensitiven Schalen um vorgefertigte Mikrogelkerne und zur Synthese von Hydrogelkernen in vorgefertigten polymeren Schalen (Nanokapseln) durchgeführt.

Identificación y caracterización de la ruta mediada por la proteína G heterotrimérica de Arabidopsis thaliana en la respuesta inmune

La resistencia de las plantas a los hongos necrótrofos como Plectosphaerella cucumerina es genéticamente compleja y depende de la activación coordinada de distintas rutas de señalización (Llorente et al, 2005; Sanchez-Vallet et al, 2010). Entre éstas se encuentran las mediadas por la proteína G heterotrimérica, un complejo formado por tres subunidades (Gα, Gβ y Gγ) que regula tanto la respuesta de inmunidad a diferentes patógenos como distintos procesos de desarrollo (Temple and Jones, 2007). En esta Tesis hemos demostrado que, en Arabidopsis, el monómero funcional formado por las subunidades Gβ y Gγ1/Gγ2 es el responsable de la regulación de la respuesta de defensa, ya que mutantes nulos en estas subunidades (agb1 y agg1 agg2) presentan una alta susceptibilidad al hongo P. cucumerina. Además, hemos identificado varios aminoácidos (Q102, T188 y R235) de la proteína AGB1 esenciales en la interacción con los efectores correspondientes para la regulación de la respuesta inmune (Jiang et al, enviado). Para determinar las bases moleculares de la resistencia mediada por la proteína G heterotrimérica, llevamos a cabo un análisis transcriptómico comparativo entre los genotipos agb1 y Col-0, el cual reveló que la resistencia mediada por AGB1 no depende de rutas defensivas implicadas en la resistencia a hongos necrotrofos, como las mediadas por el ácido salicílico (SA), etileno (ET), jasmónico (JA) o ácido abscísico (ABA), o la ruta de biosíntesis de metabolitos derivados del triptófano. Este estudio mostró que un número significativo de los genes desregulados en respuesta a P. cucumerina en el genotipo agb1 respecto a las plantas silvestres codificaban proteínas con funciones relacionadas con la pared celular. La evaluación de la composición y estructura de la pared de los mutantes de las subunidades de la proteína G heterotrimérica reveló que los genotipos agb1 y agg1 agg2 presentaban alteraciones similares diferentes de las observadas en plantas silvestres Col-0, como una reducción significativa en el contenido de xilosa en la pared. Estos datos sugieren que la proteína G heterotrimérica puede modular la composición/estructura de la pared celular y contribuir, de esta manera, en la regulación de la respuesta inmune (Delgado- Cerezo et al, 2011). La caracterización del interactoma de la proteína G heterotrimérica corroboró la relevancia funcional que presenta en la regulación de la pared celular, ya que un número significativo de las interacciones identificadas estaban comprendidas por proteínas relacionadas directa o indirectamente con la biogénesis y remodelación de la pared celular (Klopffleisch et al, 2011). El papel en inmunidad de algunos de estos potenciales efectores ha sido validado mediante el análisis de la resistencia a P. cucumerina de los mutantes de pérdida de función correspondientes. Con el objetivo de caracterizar las rutas de señalización mediadas por AGB1 e identificar efectores implicados en esta señalización, llevamos a cabo una búsqueda de mutantes supresores de la susceptibilidad de agb1 a P. cucumerina, identificándose varios mutantes sgb (supressor of Gbeta). En esta Tesis hemos caracterizado en detalle el mutante sgb10, que presenta una activación constitutiva de las rutas de señalización mediadas por SA y JA+ET y suprime el fenotipo de susceptibilidad de agb1. SGB10 y AGB1 forman parte de rutas independientes en la regulación de la respuesta inmune, mientras que interaccionan de forma compleja en el control de determinados procesos de desarrollo. La mutación sgb10 ha sido cartografiada entre los genes At3g55010 y At3g56408, que incluye una región con 160 genes. ABSTRACT Plant resistance to necrotrophic fungi Plectosphaerella cucumerina is genetically complex and depends on the interplay of different signalling pathways (Llorente et al, 2005; Sanchez-Vallet et al, 2010). Among others, the heterotrimeric G protein complex has a relevant role. The G protein that is formed by three subunits (Gα, Gβ and Gγ) is a pleiotropic regulator of immune responses to different types of pathogens and developmental issues (Temple and Jones, 2007). Throughout the Thesis, we have demonstrated that Arabidopsis’ functional monomer formed by the Gβ and Gγ1/Gγ2 subunits is a key regulator of defense response, as null mutants (agb1 and agg1 agg2) are equally hypersusceptible to P. cucumerina infection. In addition we have identified several AGB1 aminoacids (Q102, T188 y R235) essentials to interact with specific effectors during the regulation of immune response (Jiang et al, sent).To determine the molecular basis of heterotrimeric G protein mediated resistance we have performed a microarray analysis with agb1-1 and wild type Col-0 plants before and after P. cucumerina challenge. A deep and exhaustive comparative transcriptomical analysis of these plants revealed that AGB1 mediated resistance does not rely on salicilic acid (SA), ethylene (ET), jasmonates (JA), abscisic acid (ABA) or triptophan derived metabolites biosynthesis. However the analysis revealed that a significant number of cell wall related genes are misregulated in the agb1 mutant after pathogen challenge when compared to wild-type plants. The analysis of cell wall composition and structure showed similar cell wall alterations between agb1 and agg1 agg2 mutants that are different from those of wild-type plants, so far the mutants present a significant reduction in xylose levels. All these results suggest that heterotrimeric G protein may regulate immune response through modifications in the cell wall composition/structure (Delgado-Cerezo et al, 2011). The characterization of Heterotrimeric G protein interactome revealed highly connected interactions between the G-protein core and proteins involved in cell wall composition or structure (Klopffleisch et al, 2011). To test the role in immunity of several effectors identified above, we have performed resistance analysis of corresponding null mutants against P. cucumerina. In order to characterize AGB1 mediated signalling pathway and identify additional effectors involved in AGB1-mediated immune response against P. cucumerina, we have performed a screening to isolate mutants with suppression of agb1 phenotype. One of the mutants, named sgb10, has been characterized during the Thesis. The mutant shows constitutive expression of SA, JA+ET-mediated defense signaling pathways to suppres agb1 hypersusceptibility. SGB10 and AGB1 proteins seem to be part of independent pathways in immunity, however its function during development remains unclear. At present, we have mapped the sgb10 mutation between At3g55010 and At3g56408 genes. This region contains 160 genes.

Caracterización funcional de los genes sgb (suppressors of agb1-2 susceptibility to pathogens): Nuevos reguladores de la respuesta de inmunidad innata de Arabidopsis thaliana

Un porcentaje importante de las pérdidas de la producción agrícola se deben a las enfermedades que causan en los cultivos los hongos necrótrofos y vasculares. Para mejorar la productividad agrícola es necesario tener un conocimiento detallado de las bases genéticas y moleculares que regulan la resistencia de las plantas a este tipo de patógenos. En Arabidopsis thaliana la resistencia frente a patógenos necrótrofos, como el hongo Plectosphaerella cucumerina BMM (PcBMM), es genéticamente compleja y depende de la activación coordinada de distintas rutas de señalización, como las reguladas por las hormonas ácido salicílico (SA), ácido jasmónico (JA), etileno (ET) y ácido abscísico (ABA), así como de la síntesis de compuestos antimicrobianos derivados del Triptófano y de la integridad de la pared celular (Llorente et al., 2005, Hernández-Blanco et al., 2007; Delgado-Cerezo et al., 2012). Uno de los componentes claves en la regulación de la resistencia de las plantas a patógenos (incluidos hongos necrótrofos y biótrofos) es la proteína G heterotrimérica, un complejo proteico formado por tres subunidades (Gα, Gβ y Gγ), que también regula distintos procesos del desarrollo vegetal. En Arabidopsis hay un gen que codifica para la subunidad α (GPA1), otro para la β (AGB1), y tres genes para la subunidad γ (AGG1, AGG2 y AGG3). El complejo GPA1-AGB1-AGG (1-3) se activa y disocia tras la percepción de una señal específica, actuando el dímero AGB1-AGG1/2 como un monómero funcional que regula las respuestas de defensa (Delgado-Cerezo et al., 2012). Estudios transcriptómicos y análisis bioquímicos de la pared celular en los que se comparaban los mutantes agb1-2 y agg1 agg2, y plantas silvestres (Col-0) revelaron que la resistencia mediada por Gβ-Gγ1/2 no es dependiente de rutas de defensa previamente caracterizadas, y sugieren que la proteína G podría modular la composición/estructura (integridad) de la pared celular (Delgado-Cerezo et al., 2012). Recientemente, se ha demostrado que AGB1 es un componente fundamental de la respuesta inmune mediada por Pathogen- Associated Molecular Patterns (PTI), ya que los mutantes agb1-2 son incapaces de activar tras el tratamiento con PAMPs respuestas de inmunidad, como la producción de especies reactivas de oxígeno (ROS; Liu et al., 2013). Dada la importancia de la proteína G heterotrimérica en la regulación de la respuestas de defensa (incluida la PTI) realizamos un escrutinio de mutantes supresores de la susceptibilidad de agb1-2 al hongo necrótrofo, PcBMM, para identificar componentes adicionales de las rutas de señalización reguladas por AGB1. En este escrutinio se aislaron cuatro mutantes sgb (suppressors of agb1-2 susceptibility to pathogens), dos de los cuales, sgb10 y sgb11, se han caracterizado en la presente Tesis Doctoral. El mutante sgb10 es un segundo alelo nulo del gen MKP1 (At3g55270) que codifica la MAP quinasa-fosfatasa 1 (Bartels et al., 2009). Este mutante presenta lesiones espontáneas en plantas adultas y una activación constitutiva de las principales rutas de defensa (SA, JA y ET, y de metabolitos secundarios, como la camalexina), que explicaría su elevada resistencia a PcBMM y Pseudomonas syringae. Estudios epistáticos sugieren que la resistencia mediada por SGB10 no es dependiente, si no complementaria a la regulada por AGB1. El mutante sgb10 es capaz de restablecer en agb1-2 la producción de ROS y otras respuestas PTI (fosforilación de las MAPK6/3/4/11) tras el tratamiento con PAMPs tan diversos como flg22, elf18 y quitina, lo que demuestra el papel relevante de SGB10/MKP1 y de AGB1 en PTI. El mutante sgb11 se caracteriza por presentar un fenotipo similar a los mutantes irregular xylem (e.g. irx1) afectado en pared celular secundaria: irregularidades en las células xilemáticas, reducción en el tamaño de la roseta y altura de planta, y hojas con un mayor contenido de clorofila. La resistencia de sgb11 a PcBMM es independiente de agb1-2, ya que la susceptibilidad del doble mutante sgb11 agb1-2 es intermedia entre la de agb1-2 y sgb11. El mutante sgb11 no revierte la deficiente PTI de agb1-2 tras el tratamiento con flg22, lo que indica que está alterado en una ruta distinta de la regulada por SGB10. sgb11 presenta una sobreactivación de la ruta del ácido abscísico (ABA), lo que podría explicar su resistencia a PcBMM. La mutación sgb11 ha sido cartografiada en el cromosoma III de Arabidopsis entre los marcadores AthFUS6 (81,64cM) y nga6 (86,41cM) en un intervalo de aproximadamente 200 kb, que comprende genes, entre los que no se encuentra ninguno previamente descrito como IRX. El aislamiento y caracterización de SGB11 apoya la relevancia de la proteína G heterotrimérica en la regulación de la interconexión entre integridad de la pared celular e inmunidad. ABSTRACT A significant percentage of agricultural losses are due to diseases caused by necrotrophic and vascular fungi. To enhance crop yields is necessary to have a detailed knowledge of the genetic and molecular bases regulating plant resistance to these pathogens. Arabidopsis thaliana resistance to necrotrophic pathogens, such as Plectosphaerella cucumerina BMM (PcBMM) fungus, is genetically complex and depends on the coordinated activation of various signaling pathways. These include those regulated by salicylic acid (SA), jasmonic acid (JA), ethylene (ET) and abscisic acid (ABA) hormones and the synthesis of tryptophan-derived antimicrobial compounds and cell wall integrity (Llorente et al., 2005, Hernández-Blanco et al., 2007; Delgado-Cerezo et al., 2012). One key component in the regulation of plant resistance to pathogens (including biotrophic and necrotrophic fungi) is the heterotrimeric G-protein. This protein complex is formed by three subunits (Gα, Gβ and Gγ), which also regulates various plant developmental processes. In Arabidopsis only one gene encodes for subunits α (GPA1) and β (AGB1), and three genes for subunit γ (AGG1, AGG2 y AGG3). The complex GPA1- AGB1-AGG(1-3) is activated and dissociates after perception of an specific signal, AGB1- AGG1/2 acts as a functional monomer regulating defense responses (Delgado-Cerezo et al., 2012). Comparative transcriptomic studies and biochemical analyses of the cell wall of agb1-2 and agg1agg2 mutant and wild plants (Col-0), showed that Gβ-Gγ1/2-mediated resistance is not dependent on previously characterized defense pathways. In addition, it suggests that G protein may modulate the composition/structure (integrity) of the plant cell wall (Delgado-Cerezo et al., 2012). Recently, it has been shown that AGB1 is a critical component of the immune response mediated by Pathogen-Associated Molecular Patterns (PTI), as agb1-2 mutants are unable to activate immune responses such as oxygen reactive species (ROS) production after PAMPs treatment (Liu et al., 2013). Considering the importance of the heterotrimeric G protein in regulation of defense responses (including PTI), we performed a screening for suppressors of agb1-2 susceptibility to the necrotrophic fungus PcBMM. This would allow the identification of additional components of the signaling pathways regulated by AGB1. In this search four sgb mutants (suppressors of agb1-2 susceptibility to pathogens) were isolated, two of which, sgb10 and sgb11, have been characterized in this PhD thesis. sgb10 mutant is a second null allele of MKP1 gene (At3g55270), which encodes the MAP kinase-phosphatase 1 (Bartels et al., 2009). This mutant exhibits spontaneous lesions in adult plants and a constitutive activation of the main defense pathways (SA, JA and ET, and secondary metabolites, such as camalexin), which explains its high resistance to Pseudomonas syringae and PcBMM. Epistatic studies suggest that SGB10- mediated resistance is not dependent, but complementary to the regulated by AGB1. The sgb10 mutant is able to restore agb1-2 ROS production and other PTI responses (MAPK6/3/4/11 phosphorylation) upon treatment with PAMPs as diverse as, flg22, elf18 and chitin, demonstrating the relevant role of SGB10/MKP1 and AGB1 in PTI. sgb11 mutant is characterized by showing a similar phenotype to irregular xylem mutants (e.g. irx1), affected in secondary cell wall: irregular xylems cells, rosette size reduction and plant height, and higher chlorophyll content on leaves. The resistance of sgb11 to PcBMM is independent of agb1-2, as susceptibility of the double mutant agb1-2sgb11 is intermediate between agb1-2 and sgb11. The sgb11 mutant does not revert the deficient PTI response in agb1-2 after flg22 treatment, indicating that is altered in a pathway different to the one regulated by SGB10. sgb11 presents an over-activation of the abscisic acid pathway (ABA), which could explain its resistance to PcBMM. The sgb11 mutation has been mapped on chromosome III of Arabidopsis, between AthFUS6 (81.64 cM) and nga6 (86.41 cM) markers, in 200 kb interval, which does not include previously known IRX genes. The isolation and characterization of SGB11 supports the importance of heterotrimeric G protein in the regulation of the interconnection between the cell wall integrity and immunity.

Compatibilisation and stabilisation of immiscible polymer blends by reactive processing

The main objectives of this research were to develop optimised chemical compositions and reactive processing conditions for grafting a functional monomer maleic anhydride (MA) in polypropylene (PP), ethylene propylene diene monomer (EPDM) and mixtures of PP-EPDM, and to optimise synthetic routes for production of PP/EPDM copolymers for the purpose of compatibilisation of PP/EPDM blends. The MA-functionalisation was achieved using an internal mixer in the presence of low concentrations (less than 0.01 molar ratio) of a free radical initiator. Various methods were used to purify MA-functionalised PP and the grafting yield was determined using either FTIR or titrametry. The grafting yield of MA alone, which due to its low free-radical reactivity towards polymer macroradicals, was accompanied by severe degradation in the case of PP and crosslinking for EPDM. In the case of MA-functionalised PP/EPDM, both degradation and crosslinking occurred though not to a great extent. The use of tri-functional coagents e.g. trimethylopropane triacrylates (TRIS) with MA, led to high improvement of the grafting yield of MA on the polymers. This is almost certainly due to high free-radical activity of TRIS leading to copolymerisation of MA and TRIS which was followed by grafting of the copolymer onto the polymer backbone. In the case of PP, the use of coagent was also found to reduce the polymer degradation. PP/EPDM copolymers with optimum tensile properties were synthesised using a 'one-step' continues reactive processing procedure. This was achieved firstly by functionalisation of a mixture of PP (higher w/w ratio) and EPDM (low w/w ratio) with MA, in the presence of the coagent TRIS and a small concentration of a free radical initiator. This was then followed by an imidisation reaction with the interlinking agent hexamethylene diamine (HEMDA). Small amount of copolymers, up to 5 phr, which were interlinked with up to 15 phr of HEMDA, were sufficient to compatibilise PP/EPDM75/25 blends resulting in excellent tensile properties compared to binary PP/EPDM 75/25 blend. Improvement in blend's compatibility and phases-stabilisation (observed through tensile and SEM analysis) was shown in all cases with significant interphases adhesion improvement between PP and EPDM, and reduction in domain size across the fractured surface indicating efficient distribution of the compatibiliser.

Design and synthesis of potential antimicrobial agents

Tuberculosis is one of the most devastating diseases in the world primarily due to several decades of neglect and an emergence of multidrug-resitance strains (MDR) of M. tuberculosis together with the increased incidence of disseminated infections produced by other mycobacterium in AIDS patients. This has prompted the search for new antimycobacterial drugs. A series of pyridine-2-, pyridine-3-, pyridine-4-, pyrazine and quinoline-2-carboxamidrazone derivatives and new classes of carboxamidrazone were prepared in an automated fashion and by traditional synthesis. Over nine hundred synthesized compounds were screened for their anti mycobacterial activity against M. fortutium (NGTG 10394) as a surrogate for M. tuberculosis. The new classes of amidrazones were also screened against tuberculosis H37 Rv and antimicrobial activities against various bacteria. Fifteen tested compounds were found to provide 90-100% inhibition of mycobacterium growth of M. tuberculosis H37 Rv in the primary screen at 6.25 μg mL-1. The most active compound in the carboxamidrazone amide series had an MIG value of 0.1-2 μg mL-1 against M. fortutium. The enzyme dihydrofolate reductase (DHFR) has been a drug-design target for decades. Blocking of the enzymatic activity of DHFR is a key element in the treatment of many diseases, including cancer, bacterial and protozoal infection. The x-ray structure of DHFR from M. tuberculosis and human DHFR were found to have differences in substrate binding site. The presence of glycerol molecule in the Xray structure from M. tuberculosis DHFR provided opportunity to design new antifolates. The new antifolates described herein were designed to retain the pharmcophore of pyrimethamine (2,4- diamino-5(4-chlorophenyl)-6-ethylpyrimidine), but encompassing a range of polar groups that might interact with the M. tuberculosis DHFR glycerol binding pockets. Finally, the research described in this thesis contributes to the preparation of molecularly imprinted polymers for the recognition of 2,4-diaminopyrimidine for the binding the target. The formation of hydrogen bonding between the model functional monomer 5-(4-tert-butyl-benzylidene)-pyrimidine-2,4,6-trione and 2,4-diaminopyrimidine in the pre-polymerisation stage was verified by 1H-NMR studies. Having proven that 2,4-diaminopyrimidine interacts strongly with the model 5-(4-tert-butylbenzylidene)- pyrimidine-2,4,6-trione, 2,4-diaminopyrimidine-imprinted polymers were prepared using a novel cyclobarbital derived functional monomer, acrylic acid 4-(2,4,6-trioxo-tetrahydro-pyrimidin-5- ylidenemethyl)phenyl ester, capable of multiple hydrogen bond formation with the 2,4- diaminopyrimidine. The recognition property of the respective polymers toward the template and other test compounds was evaluated by fluorescence. The results demonstrate that the polymers showed dose dependent enhancement of fluorescence emissions. In addition, the results also indicate that synthesized MIPs have higher 2,4-diaminopyrimidine binding ability as compared with corresponding non-imprinting polymers.

Branched polystyrene with abundant pendant vinyl functional groups from asymmetric divinyl monomer

Branched polystyrenes with abundant pendant vinyl functional groups were prepared via radical polymerization of an asymmetric divinyl monomer, which possesses a higher reactive styryl and a lower reactive butenyl. Employing a fast reversible addition fragmentation chain transfer (RAFT) equilibrium, the concentration of active propagation chains remained at a low value and thus crosslinking did not occur until a high level of monomer conversion. The combination of a higher reaction temperature (120 degrees C) and RAFT agent cumyl dithiobenzoate was demonstrated to be optimal for providing both a more highly branched architecture and a higher polymer yield.