91 resultados para feldspato
Resumo:
Estudos com Espodossolos de ambientes tropicais de tabuleiros costeiros ainda são escassos. Este trabalho visou caracterizar perfis desses solos, tanto nos tabuleiros como em uma restinga nos Estados da Paraíba e do Pernambuco, Nordeste do Brasil. O estudo foi realizado com 14 perfis, inseridos em relevo predominantemente plano e sob cultivo de cana-de-açúcar, em que foram realizadas análises físicas, químicas e mineralógicas. Com relação às condições de drenagem, a maioria dos perfis foi definida como moderada a imperfeitamente drenada, com o lençol freático presente a uma profundidade de 182, 85 e 74 cm, em três deles. A textura evidenciou-se predominantemente arenosa, com variações entre areia, areia-franca e franco-arenosa, sempre com valores da fração argila inferiores a 130 g kg-1. Com relação às propriedades químicas, observaram-se acidez elevada, baixa saturação por bases, baixa CTC e alta saturação por Al3+. Alguns horizontes com cores nos matizes 10YR e 7,5YR, com valores entre 5 e 7 e cromas de 2 a 8 classificados como Bs, apresentaram teores de matéria orgânica mais altos que alguns horizontes classificados como Bhs, demonstrando a insuficiência do critério da cor para identificação desses horizontes cimentados. A mineralogia dos solos apresentou predominância de caulinita e quartzo na fração argila, com pequena representação de ilita, gibbsita, feldspato e anatásio. Nos tabuleiros, além desses minerais, também ocorreu a goethita. Na fração silte, verificou-se a predominância de quartzo e caulinita em todos os solos e, em menor expressão, anatásio, feldspato, goethita e gibbsita. Na fração areia, houve predominância do quartzo em todos os perfis, com traços de feldspato.
Resumo:
O Arquipélago de Fernando de Noronha (FN) possui solos pouco desenvolvidos das classes dos Cambissolos, Vertissolos e Neossolos, com características peculiares relacionadas ao material de origem vulcânico, clima tropical com franco domínio oceânico e relevo ondulado a forte ondulado. Os Vertissolos de FN são formados a partir de rochas básicas, tufos vulcânicos e sedimentos aluvionares e estão associados às superfícies rebaixadas com drenagem impedida do planalto central ou da baixada litorânea. Tendo em vista a necessidade de preservação ambiental, uso agrícola ou geotécnico e características peculiares desse ambiente insular, os Vertissolos de FN precisam de melhor entendimento de seus atributos. O objetivo deste trabalho foi, portanto, caracterizar morfológica, física, química e mineralogicamente Vertissolos de ocorrência comum na ilha de Fernando de Noronha. Três perfis de Vertissolos derivados de diferentes materiais de origem, classes de drenagem e níveis de salinidade e sodicidade foram descritos e coletados para realização das análises de caracterização. Os solos estudados foram: Vertissolo Háplico órtico solódico (P01), Vertissolo Háplico sálico gleissólico (P02) e Vertissolo Háplico sódico gleissólico (P03). Os Vertissolos de FN apresentam feições típicas da ordem, como a textura argilosa a muito argilosa, as superfícies de fricção (slickensides) e o fendilhamento horizontal e vertical quando secos. Esses solos são imperfeitamente a maldrenados e sofrem alagamento temporário no período de maior concentração das chuvas. Apresentam elevados valores de soma e saturação por bases, além de teores altos a muito altos de P extraível, de distribuição irregular entre perfis e com dominância de formas inorgânicas. Não obstante, esses apresentam problemas de acumulação de sais, o que restringe a utilização agrícola ou geotécnica deles. Os principais minerais da fração argila dos solos são do grupo das esmectitas, seguidos por caulinitas e, ou, haloisitas. A fração silte é constituída por hematita, goethita, magnetita/maghemita, ilmenita, mica e feldspato e por minerais pouco comuns em solos brasileiros como crandalita e holandita.
Resumo:
No processo de desdobramento dos blocos de granito e basalto, os teares utilizam granalha de ferro/aço como abrasivo gerando grandes quantidades de material fino a base dos minerais constituintes das rochas, da granalha cominuída e do desgaste das lâminas (lama abrasiva). Este trabalho tem por objetivo caracterizar a lama abrasiva no estágio em que esta sai do processo de desdobramento das rochas (rejeito). Isto acontece quando a granalha atinge a fração < 0,42 mm e perde suas propriedades abrasivas, dispensando, desta forma, sua presença no sistema. O equipamento utilizado para a retirada da lama não abrasiva é o hidrociclone, que através do overflow conduz o rejeito a uma bacia de decantação. A caracterização do rejeito foi realizada tanto em amostras individuais, como em amostras coletadas diretamente nos tanques de decantação provenientes da serragem de diferentes tipos litológicos, enfatizando, principalmente, os aspectos físicos (morfológico e granulométrico) que caracterizam esta lama não abrasiva. Este estudo busca, também, quantificar o volume produzido de rejeito pelas principais empresas de desdobramento do setor, bem como o provável aproveitamento econômico, através de métodos de separação mineral apropriados, de modo que se determine uma rota viável na ordem técnica e econômica. Outro aspecto abordado foi o impacto ambiental gerado pela deposição destes rejeitos, uma vez que, poucas empresas do setor têm a preocupação efetiva de adequar suas bacias de decantação com as normas vigentes da legislação ambiental. Após o esgotamento dessas bacias, os rejeitos são descartados em aterros próximos às empresas ou nos “lixões” e aterros das prefeituras municipais. Observa-se, desta forma, que não há o devido tratamento, haja vista, o material apresentar elevado percentual de sólidos (ferro, quartzo, feldspato) e pH em torno de 12 (alcalino).
Resumo:
Este trabalho consiste em um estudo de caracterização e viabilidade econômica, para implantação de uma linha de processo, para beneficiar uma jazida de nefelina-sienito. Esta jazida pertence à Mineração e Pesquisa Brasileira Ltda e está localizada no Domo Alcalino do Planalto Lageano, no Estado de Santa Catarina. Nefelina-sienito é uma rocha ígnea de origem plutônica, com ausência de quartzo livre, constituída por minerais félsicos que são os feldspatos e feldspatóides e máficos, que são o piroxênio e anfibólio, associados a minerais acessórios como zircão, apatita, titanita e minerais opacos. Sua principal utilização é como fundente para a indústria cerâmica e vidreira. Este insumo concorre com o Feldspato neste segmento, com vantagens intrínsecas, como teor mais elevado de álcalis (Na2O+K2O), homogeneidade da jazida, além da proximidade do centro consumidor. Por outro lado, apresenta uma grande desvantagem que limita sua utilização na indústria cerâmica, e praticamente exclui seu emprego para o porcelanato e esmalte, que é a interferência na cor do produto final, reflexo do elevado teor de ferro. O objetivo deste trabalho é obter um produto que sirva de insumo (matériaprima) fundente à indústria cerâmica, especificamente na linha de revestimentos nobres, para a fabricação de um piso cerâmico de alto valor agregado, denominado grêsporcelanato Para atingir este objetivo, definiu-se as etapas e ensaios a serem realizados para extrair os minerais máficos (cromóforos), ou seja, aqueles com ferro presente em sua estrutura, e com isto enquadrar o produto dentro dos padrões exigidos pela indústria cerâmica. Inicialmente realizou-se uma caracterização mineralógica da nefelina-sienito, identificando suas características estruturais e texturais e seus minerais constituintes, diferenciando os máficos dos félsicos, estudando suas características físicas, químicas e morfológicas. Posteriormente, efetuou-se a caracterização tecnológica avaliando o grau de liberação destes minerais e, por fim, ensaios de beneficiamento, utilizando-se as técnicas de flotação e separação magnética a seco e a úmido, avaliando suas performances e definindo a rota de processo mais indicada.Elaborou-se um fluxograma de processo específico para esta linha de produção considerando os equipamentos que a empresa já possui, buscando reduzir o custo de implantação. Definida a linha de processo e os equipamentos necessários para sua implantação, avaliou-se os investimentos e custos envolvidos para duas escalas de produção. Por fim elaborou-se um fluxo de caixa para avaliar a viabilidade econômica do projeto. Os resultados encontrados confirmaram a viabilidade técnica e econômica para implantação desta nova linha de processo.
Resumo:
O presente trabalho teve como objetivo investigar os fenômenos que controlam a porosidade em corpos cerâmicos com fases vítreas, formadas pela ação de fundentes, e associá-los com sua microestrutura final. Foram selecionados os fundentes albita, feldspato alcalino, wollastonita e espodumênio, representativos daqueles comercializados no setor cerâmico, a partir de critérios como teor e tipo de álcali, e teor em SiO2 e Al2O3 na composição química. Estes fundentes foram formulados com cada uma das seguintes matérias-primas e combinações destas: quartzo, caulim e talco. As composições foram formuladas com o objetivo de obter-se uma gama de diferentes microestruturas, variando porosidade, e a presença de fases vítreas ou cristalinas. Os corpos cerâmicos foram obtidos em fornos elétricos, tipo mufla, variando-se a temperatura entre 1140 e 1260°C, conforme a formulação investigada. Foram determinadas as propriedades dos corpos cerâmicos, como porosidade aparente, absorção de água e retração linear. Os resultados obtidos foram associados com sua microestrutura e formulação. Para tanto, fez-se uso de microscopia eletrônica de varredura e difratometria de raios-X. Em especial, a porosidade foi avaliada quanto sua distribuição, morfologia e tamanho, e sua influência na definição da microestrutura final, e relação com propriedades dos corpos cerâmicos investigados. Os resultados obtidos indicaram que o comportamento dos fundentes em massas cerâmicas define decisivamente a formação da porosidade em função da composição química do fundente e da combinação desta com a dos outros constituintes da massa cerâmica. O espodumênio forma fase vítrea reagindo basicamente com o quartzo em baixas temperaturas, retendo a porosidade principalmente junto às trincas de contração do mesmo. A albita propicia na expansão da porosidade e interconexão da mesma. O feldspato alcalino forma um líquido de maior viscosidade mantendo a menor porosidade e de maneira mais isolada. A wollastonita reage de modo diferenciado dos demais no que diz respeito à sílica presente, reagindo melhor na presença do alumínio e do magnésio.
Resumo:
O solo residual de gnaisse ocupa uma grande área da cidade de Porto Alegre. Embora exista histórico de instabilidades de estruturas de contenção executadas neste material, o estudo científico de suas propriedades geotécnicas foi iniciado somente a partir da execução de uma obra de solo grampeado, realizada no ano de 2001. O projeto da obra supracitada foi revisado a partir do início das escavações, através de retro-análises de rupturas induzidas, o que conduziu a parâmetros de resistência ao cisalhamento sensivelmente inferiores aos obtidos inicialmente através de ensaios de campo. Os deslocamentos de crista, medidos nesta estrutura, superaram os valores esperados a partir de dados da literatura. O solo residual de gnaisse estudado apresenta forte anisotropia textural, marcada pelos bandamentos herdados da rocha mãe. Estes bandamentos são formados pela intercalação de bandas micáceas e bandas compostas principalmente por partículas de quartzo e feldspato. Foram realizados ensaios triaxiais com medição local de deformações, ensaios de compressão isotrópica e ensaios de compressão confinada para o estudo da resistência ao cisalhamento e da deformabilidade deste solo residual de gnaisse Os ensaios foram realizados para diferentes ângulos entre o bandamento micáceo e a direção da tensão principal maior a. Diferente dos solos residuais de gnaisse estudados em outras partes do Brasil, o solo residual de gnaisse estudado apresenta clara anisotropia de resistência ao cisalhamento e de deformabilidade, devida à estrutura herdada da rocha mãe. Em um comportamento também diferente dos solos supracitados, o solo residual de gnaisse de Porto Alegre, com base nos ensaios realizados nesta dissertação, não apresenta uma superfície de plastificação dada pela sua estrutura. Realizando-se uma interpretação através dos conceitos da Teoria do Estado Crítico, verificou-se que o solo residual de gnaisse apresenta uma NCL para amostras reconstituídas, mas, devido ao seu caráter anisotrópico, não foi possível determinar a CSL do solo residual de gnaisse, nem definir sobre sua unicidade.
Resumo:
MELO, Maxymme Mendes de ; PINHEIRO, Andrea Santos ; NASCIMENTO, R. M. ; MARTINELLI, Antonio Eduardo ; DUTRA, Ricardo Peixoto Suassuna ; MELO, Marcus Antônio de Freitas . Análise microestrutural de misturas cerâmicas de grês Porcelanato com adição de chamote de telhas cerâmicas. Cerâmica (São Paulo. Impresso), v. 55, p. 356-364, 2009
Resumo:
The dielectric porcelain is usually obtained by mixing various raw materials proportions and is used in the production of electronic equipment for various applications, from capacitors of high and low Power to insulators for low, medium, high and extra high voltage, which are used in distribution lines and transmission of electricity.This work was directed to the s tudy of technological properties of technic porcelain, made from raw materials extracted from pegmatites found in the regions of Seridó and the Alto Oeste of Rio Grande do Norte, which are made of kaolin, quartz and feldspar, abundant and high quality in these regions. The technic ceramics were obtained by mixing in appropriate levels, kaolin, feldspar, quartz and clay, the last item from a pottery in the city of Sao Gonçalo do Amarante, Rio Grande do Norte. During the development the following characterizations correlated to raw materials were made: laser particle sizing, x-ray diffraction, DTA and TG. The compositions studied were formed by uniaxial pressing at a pressure of 50 MPa and sintered at temperatures ranging from 1150 to 1350ºC and levels (times) of sintering between 30, 60, 90 and 120 minutes. The characterization of the samples were taken from the analysis of weight loss, linear shrinkage, porosity, stoneware curve, bulk density, flexural strength of three points, SEM and X-ray diffraction, TMA, Dielectric and cross Resistivity. The studied materials can be employed in producing the objects used in electrical engineering such as: insulators for low, medium and high-voltage electrical systems, command devices, bushing insulation for transformers, power capacitors, spark plugs, receptacles for fluorescent and incandescent light bulbs and others
Resumo:
In the State Rio Grande do Norte, Brazil, the most significant deposits of minerals in the production of granite and pegmatite are Seridó region. Municipalities of Parelhas and Equador are the main responsible for the production of feldspar, quartz, kaolin and granite. The ceramic industries are always in search of competitiveness by investing in new products or improving existing techniques. The stoneware is a type of pottery that stands in the market because it presents technical and aesthetic characteristics superior to other existing products. Characteristics of the raw materials initially obtained with chemical analysis and mineralogical analysis are crucial in getting a product that satisfies the conditions in a manufacturing process and is, in principle, directly related to the firing cycle. This research aimed at developing new formulations for the mass production of ceramic stoneware. The raw materials initially characterized were feldspar, quartz, kaolin and granite. As part of the research was developed at the University of Aveiro, in Portugal, we used two clays used in the production of Portuguese ceramics. The raw material Brazilian and Portuguese and the final product, both in Portugal and Brazil, were analyzed for X-ray fluorescence, X-ray diffraction, granulometric analysis, dilatometric analysis, thermal analysis and analysis of scanning electron microscopy (MEV). The specimens prepared at the University of Aveiro (DECV) were sintered at 10000C and 12000C and the specimens prepared in UFRN were sintered at 10000C, 10500C, 11000C, 11500C, 12000C, 12500C and 13000C, but the best results and demonstrating the presence of the mineral mullite were at temperatures of 12000C, 12500C and 13000C. The results showed that the granite waste used may be considered raw material of excellent quality for use in the ceramic industry and coating floors and more accurately by the industry of stoneware. Physical and mechanical tests conducted on samples of the formulations F01 and F02 developed in UFRN showed a water absorption and mechanical strength suitable for the stoneware
Resumo:
The power industry generates as waste ceramic bodies of electrical fuses that are discarded after use. The formulation of ceramic bodies for porcelain electrical insulators using waste from the bodies fuse allocation promotes environmentally appropriate, through the reuse of the material. This work evaluated the technical feasibility of using waste for use in electrical porcelains with formulations containing the residue, feldspar and kaolinite. The raw materials were processed through grinding and sieving to 200 mesh. The ceramic material obtained from the proposed formulations with 25%, 30%, 34% and 40% of the residue went through a vibratory mill for grinding and homogenization, and then were sieved at 325 mesh. The samples were shaped in a uniaxial press, with the application of 25 MPa and sintered at 1100° C, 1150°C, 1200°C, 1225°C and 1250°C, at levels of 20 and 45 minutes. Were also developed bodies of evidence with reference formulations obtained without residue, to establish a comparison on physical, mechanical and electrical. The tests were conducted and technology: linear shrinkage, porosity, water absorption, resistance to bending to three points, measuring insulation resistance electrical resistivity of the material, X-ray diffraction and X-ray fluorescence Waste characterizations pointed to the existence of two phases: mullite and quartz phases are of great importance in the microstructure of the ceramic and this fact reveals a possibility for reuse in electrical porcelains. The mullite is an important constituent because it is a phase that makes it possible to increase the mechanical strength in addition to the body allows the use at high temperatures. The use of ceramic bodies residue fuses, proved feasible for application in electrical porcelain and the most significant results were obtained by the formulations with 25% waste and sintering at 1200°C
Resumo:
To produce porcelain tiles fluxing agents are used in order to obtain a liquid phase during firing. This liquid phase fills the pores decreasing porosity, water absorption and contributes to material densification. In the porcelain tiles industry, feldspar is the main flux material used, with quantities ranging between 35 and 50%. Studies focus on the discovery of materials with flux characteristics that can reduce the consumption of feldspar by porcelain tiles industry. In this context, the coffee husk ashes, a residue obtained when coffee husks are burned to produce heat for the dryers during the processing of the green fruit, have as main chemical constituents potassium, calcium and magnesium, giving them characteristics of fluxing material. Brazil is the largest coffee producer in the world and is responsible for over 30% of the world s production. In this work a physical treatment of coffee husk ash was carried out in order to eliminate the organic matter and, after this, two by-products were obtained: residual wastes R1 and R2. Both residues were added separately as single fluxes and also in association with feldspar in mixtures with raw materials collected in a porcelain industry located in Dias d Ávila-Ba. The addition of these residues aimed to contribute to the reduction of the consumption of feldspar in the production of porcelain tiles. Specimens were produced with dimensions of 60 mm x 20 mm x 6 mm in an uniaxial die with compacting pressure of 45 MPa. The samples were heated to a temperature of 1200 °C, for 8 minutes. Tests were performed to characterize the raw materials by XRF, XRD, particle size analysis, DTA and TGA and, additionally, the results of the physical properties of water absorption, apparent porosity, linear shrinkage, density, dilatometry, flexural strength and SEM of sintered body were analyzed. Additions of less than 8% of the residue R1 contributed to the decrease of porosity, but the mechanical strength of the samples was not satisfactory. Additions of 5% the R2 residue contributed significantly to decrease the water absorption and apparent porosity, and also to increase the mechanical strength. Samples with addition of feldspar associated with the R2 residue, in proportions of 6.7% of R2 and 6.7% of feldspar, led to results of water absorption of 0.12% and mechanical strength of 46 MPa, having parameters normalized to the manufacture of porcelain stoneware tiles
Resumo:
The Rio do Peixe Basin represents a main basin of northeastern Brazil and pioneering work positioned the rocks of this basin in the Early Cretaceous. However, a recent study, based on integrated pollen analysis from three wells, found an unprecedented siliciclastic sedimentary section, in the region, of early Devonian age. Therefore, the present study aims a detailed petrographic and petrological analysis of this devonian section, in the Rio do Peixe Basin and proposes a diagenetic evolution, to understand the characteristics of the porous system, identify the main reservoir petrofacies with the main factors impacting on the quality of these rocks as reservoirs and a quick study on the provenance of this section. The petrographic study was based on samples obtained from subsurface and surface. The diagenetic evolution of petrofacies and its identification were based only on subsurface samples and the study of provenance was based on surface samples. The thin sections were prepared from sandstones, pelites and sandstones intercalated with pelites. The original detrital composition for this section is arcosean and the main diagenetic processes that affected these rocks occur in various depths and different conditions, which resulted in extensive diagenetic variety. The following processes were identified: early fracture and healing of grains; albitization of K-feldspar and plagioclase; siderite; precipitation of silica and feldspar; mechanical infiltration of clay and its transformation to illite/esmectite and illite; autigenesis of analcime; dissolution; autigenesis of chlorite; dolomite/ferrous dolomite/anquerite; apatite; calcite; pyrite; titanium minerals and iron oxide-hidroxide. The occurrence of a recently discovered volcanism, in the Rio do Peixe Basin, may have influenced the diagenetic evolution of this section. Three diagenetic stages affected the Devonian section: eo, meso and telodiagenesis. This section is compositionally quite feldspathic, indicating provenance from continental blocks, between transitional continental and uplift of the basement. From this study, we observed a wide heterogeneity in the role of the studied sandstones as reservoirs. Seven petrofacies were identified, taking into account the main diagenetic constituent responsible for the reduction of porosity. It is possible that the loss of original porosity was influenced by intense diagenesis in these rocks, where the main constituent for the loss of porosity are clays minerals, oxides and carbonate cement (calcite and dolomite)
Resumo:
Initially concentrated in some poles at the South and Southeast regions of Brazil, the ceramic tiles industry became wide during the 80 s decade, with a disconcentration industrial and regional pulverization. The competitiveness in the ceramic tiles internal and external consumers markets, it has debtor the industries to invest in sophisticated products each time more, either in design or the technology, but, mainly, in its final properties. Amongst the diverse types of ceramic coating, the porcelanato if has detached had to its process of technological production and excellent characteristics techniques. The Porcelanato is currently the material for coatings that presents the best technical and aesthetic features when compared with others ceramics found on the market. The chemical composition and the others raw materials characteristics have an importance that must to be ally to the inherent characteristics of fabrication process, essentially those related to the cycle of burning. This work had as purpose to develop formularizations of ceramic mass for production of porcelanato without glass coating, pertaining to the group BIa (text of absorption of water ≤ 0.5%) and with resistance superior mechanics 35MPa from raw materials characterized. The ceramic raw materials selected to the development of this study (A1 and A2 clays, feldspate, talc and quartz) were submitted to the following tests: X-ray fluorescence - chemical analysis determination; X-ray diffraction - Analysis of the stages mineralogics; Laser granulometry - size distribution of particles; and Differential thermal analysis - thermal behavior. Were performed tests of absorption of water, lineal retraction of it burns, apparent specific mass and rupture tension the flexing. The results had evidenced that the formularizations that had the A1 clay and talc on its composition were efficient for the porcelanato production remaining their technological characteristics inside of the intervals of variation desired by the Norms of the ABNT
Resumo:
The State of Rio Grande do Norte, Brazil, possess major deposits of feldspar, clay, kaolin and talc, all raw materials used in the production of porcelainized stoneware tiles. Conversely, state industries manufacture only low added value red ceramics. Porcelainized stoneware tiles is one of the noblest ceramics, depicting low water absorption (typically below of 0,5%), in addition to excellent staining resistance and mechanical strength. The present work aims at investigating the potential of local raw materials for the production of porcelainized stoneware tiles. To that end, these materials were characterized by X-ray fluorescence, X-ray diffraction, particle size analysis, thermal gravimetric analysis and thermal differential analysis. Admixtures containing different compositions were prepared and fired at three temperatures, 1150, 1200 and 1250°C for 30 min. After firing, tests samples were characterized by water absorption tests, linear retraction, dilatometric analysis, apparent porosity, apparent specific mass, flexural strength, and microstructural analysis by XRD and SEM. The results revealed that ceramics with porcelainized stoneware tiles characteristics could be produced from raw materials originated in the State of Rio Grande do Norte
Resumo:
The State Bahia, Brazil, presents different geological sites it with a very expressive variety minerals. It is situated among the very important States which produces minerals for industries, such as pointed aggregate, ornamentals stones and ceramics raw materials. Nowadays only four companies producting ceramics tiles. Porcelainized stoneware tiles is one of the noblest ceramics, depicting low water absorption (typically below of 0,5%), in addition to excellent staining resistance and mechanical strength. The present work aims at investigating the potential of local raw materials for the production of porcelainized stoneware tiles. For this purpose, these materials were characterized by X-ray fluorescence, X-ray diffraction, particle size analysis, thermal gravimetric analysis, thermal differential analysis and dilatometric analysis. Admixtures containing different compositions were prepared and fired at four temperatures, 1100 ºC, 1150 ºC, 1200 ºC and 1250 ºC with isotherm for 60 minute and heathing rate of 5 oC/min. After firing the samples, they were characterized by water absorption tests, linear retraction, analysis, apparent porosity, apparent specific mass, flexural strength, and microstructural analysis by X-ray diffraction and scanning electron microscopy . The results revealed three ceramics with porcelainized stoneware tiles characteristics and porcelain tile will be produce from raw materials originated in the State of Bahia