Contribution of re-regulation reservoirs considering pumping capability to environmentally friendly hydropower operation

Environmental constraints imposed on hydropoweroperation are usually given in the form of minimum environmental flows and maximum and minimum rates of change of flows, or ramp rates. One solution proposed to mitigate the environmental impact caused by the flows discharged by a hydropower plant while reducing the economic impact of the above-mentioned constraints consists in building a re-regulationreservoir, or afterbay, downstream of the power plant. Adding pumpingcapability between the re-regulationreservoir and the main one could contribute both to reducing the size of the re-regulationreservoir, with the consequent environmental improvement, and to improving the economic feasibility of the project, always fulfilling the environmental constraints imposed to hydropoweroperation. The objective of this paper is studying the contribution of a re-regulationreservoir to fulfilling the environmental constraints while reducing the economic impact of said constraints. For that purpose, a revenue-driven optimization model based on mixed integer linear programming is used. Additionally, the advantages of adding pumpingcapability are analysed. In order to illustrate the applicability of the methodology, a case study based on a real hydropower plant is presented

Environmentally friendly reduction of a platinum catalyst precursor supported on polypyrrole

Supported metals are traditionally prepared by impregnating a support material with the metal precursor solution, followed by reduction in hydrogen at elevated temperatures. In this study, a polymeric support has been considered. Polypyrrole (PPy) has been chemically synthesized using FeCl3 as a doping agent, and it has been impregnated with a H2PtCl6 solution to prepare a catalyst precursor. The restricted thermal stability of polypyrrole does not allow using the traditional reduction in hydrogen at elevated temperature, and chemical reduction under mild conditions using sodium borohydride implies environmental concerns. Therefore, cold RF plasma has been considered an environmentally friendly alternative. Ar plasma leads to a more effective reduction of platinum ions in the chloroplatinic complex anchored onto the polypyrrole chain after impregnation than reduction with sodium borohydride, as has been evidenced by XPS. The increase of RF power enhanced the effectiveness of the Ar plasma treatment. A homogeneous distribution of platinum nanoparticles has been observed by TEM after the reduction treatment with plasma. The Pt/polypyrrol catalyst reduced by Ar plasma at 200 watts effectively catalyzed the aqueous reduction of nitrates with H2 to yield N2, with a very low selectivity to undesired nitrites and ammonium by-products.

Environmentally friendly and regioselective C3-alkylation of indoles with alcohols through a hydrogen autotransfer strategy

The direct alkylation of indoles using KOH and alcohols, as initial source of the electrophile, under solvent-free conditions is a safe and environmentally benign strategy for selective modification of these structures at the C3-position, without using hazardous and difficult to handle bromide or iodide derivatives or toxic and expensive transition metal catalysts. The protocol shows a broad scope, including halogenated indoles and secondary alcohols.

Mesoporous Metal Complex–Silica Aerogels for Environmentally Friendly Amination of Allylic Alcohols

Two series of mesoporous hybrid iron(III) complex–silica aerogels were prepared in one-pot synthesis by using the sol–gel coordination chemistry approach. The use of the ligands 3-(2-aminoethylamino)propyltrimethoxysilane and 2-(diphenylphosphino)ethyltriethoxysilane, both with terminal triethoxysilyl groups, were used to incorporate metal complexes in situ into the framework of silica, through their co-condensation with a silicon alkoxide during the aerogel formation. This methodology yielded optically translucent hybrid mesoporous gels with homogeneous metal incorporation and excellent textural properties. The catalytic performance of these materials was tested in the direct amination of allylic alcohols in water as a target reaction, with activities comparable or even higher than those corresponding to the homogeneous iron(III) complex. Furthermore, these catalysts were stable and maintained their catalytic activity after six reaction cycles.

Mixed-charge copolymer as environmentally friendly low fouling marine coatings

Thesis (Master's)--University of Washington, 2016-06

A profile of travelers who are willing to stay in environmentally friendly hotel

The purpose of this study is to describe travelers that have indicated they are willing to stay in green hotel in order to better understand the market segment. There is very little knowledge about these types of travelers, thus making it difficult for hoteliers to know how to create marketing campaigns that target them. Data were collected via an online survey company. Behavior characteristics provided a more distinguishing profile of the traveler than did demographics or psychographics. Most travelers were willing to pay the same amount for a green hotel as a traditional hotel. Implications, future research, and limitations are discussed.

Crystal engineering of co-crystals and host-guest systems for environmentally friendly applications: sunscreens stabilization, pollutant sequestering and herbicide reformulation.

Solid state engineered materials have proven to be useful and suitable tools in the quest of new materials. In this thesis different crystalline compounds were synthesized to provide more sustainable products for different applications, as in cosmetics or in agrochemistry, to propose pollutants removal strategy or to obtain materials for electrocatalysis. Therefore, the research projects presented here can be divided into three main topics: (i) sustainable preparation of solid materials of widely used active ingredients aimed at the reduction of their occurrence in the natural environment. The systems studied in this section are cyclodextrins host-guest compounds, obtained via mechanochemical and slurry synthesis. The first chemicals studied are sunscreens inclusion complexes, that proved to have enhanced photostability and desired photoprotection. The same synthetic methods were applied to obtain inclusion complexes of bentazon, a herbicide often found to leach in groundwaters. The resulting products showed to have desired water solubility properties. The same herbicide was also adsorbed on amorphous calcium phosphate nanoparticles, to obtain a biocompatible formulation of this agrochemical. This herbicide could benefit by the adsorption on nanoparticles for what concerns its kinetic release in different media as well as its photostability. (ii) Sustainable synthesis of co-crystals based on polycyclic aromatic hydrocarbons, for the proposal of a sequestering method with a resulting material with enhanced properties. The co-crystallization via mechanochemical means proved that these pollutants can be sequestered via simple solvent-free synthesis and the obtained materials present better photochemical properties when compared to the starting co-formers. (iii) Crystallization from mild solvents of nanosized materials useful for the application in electrocatalysis. The study of compounds based on nickel and cobalt metal ions resulted in the obtainment of 2D and 1D coordination polymers. Moreover, solid solutions were obtained. These crystals showed layered structures and, according to preliminary results, they can be exfoliated.

Trends and strategies of ozone application in environmental problems

Efforts presented by the scientific community in recent years towards the development of numerous green chemical processes and wastewater treatment technologies are presented and discussed. In the light of these approaches, environmentally friendly technologies, as well as the key role played by the well-known advanced oxidation processes, are discussed, giving special attention to the ones comprising ozone applications. Fundamentals and applied aspects dealing with ozone technology and its application are also presented.

Biological extraction of bromelain from pineapple byproducts

[Excerpt] Isolation and purification of valuable compounds are very important processes to valorize agro-food byproducts. Currently, protein extraction and development of environmentally friendly technologies are industrially relevant topics [1]. Among the extracted proteins from byproducts proteases are a relevant group for industrial applications. These enzymes are a class of hydrolytic enzymes capable of cleaving the peptide bonds of proteins chains and are essential in physiological processes [2]. (...)

Puunpolton mahdollisuudet Suomenojan voimalaitoksella

Puuenergian käyttö on viime vuosina lisääntynyt kaukolämmön tuotannossa sekä yhdistetyssä sähkön ja lämmön tuotannossa. Puun kilpailukykyä polttoaineena ovat lisänneet polttotekniikan ja korjuutekniikoiden kehittyminen. Puun energiakäyttöä on edistänyt myös valtiovalta tukien ja veroratkaisuiden avulla, koska fossiilisten polttoaineiden korvaaminen puupolttoaineilla tukee Suomen ilmastopoliittisia tavoitteita. Tämän työn tavoitteena oli selvittää puupolttoaineiden käytön mahdollisuudet Espoon Sähkön Suomenojan voimalaitoksella. Nykyiset Suomenojan pääpolttoaineet ovat kivihiili ja maakaasu. Suomenojalle toimitetut puupolttoaineet koostuisivat sahoilta saatavista sivutuotteista, metsätähdehakkeesta ja kierrätyspuusta. Puupolttoaineiden taloudellinen saatavuus vaihtelee alueittain huomattavasti. Espoo ei tässä suhteessa ole sijainniltaan edullinen. Saatujen polttoainetarjousten perusteella puunpolton kustannukset nousevat kivihiilen kustannuksia korkeammiksi kuljetusetäisyyksistä johtuen, kun puunpoltto on yli 300 GWh/a. Tämä vastaisi 10 prosenttia Espoon Sähkön vuoden 2000 kokonaispolttoainekäytöstä ja 8 prosenttia arvioidusta polttoaineiden käytöstä vuodelle 2010. Puuta voidaan polttaa leijukerrostekniikkaan perustuvissa kattiloissa, arinakattiloissa, pölypolttona tai kaasuttamalla ja johtamalla tuotekaasu poltettavaksi. Puun ravinneaineista kloori voi aiheuttaa kuumakorroosiota höyrykattiloiden tulistimissa. Tätä pyritään estämään seospoltolla rikkipitoisten polttoaineiden, kuten turpeen tai kivihiilen kanssa. Seospoltto muiden polttoaineiden kanssa parantaa myös puun palamistulosta. Puupolttoaineiden kosteus voi olla jopa 60 prosenttia. Tässä työssä tutkittiin puun energiakäytölle pääasiassa kuutta eri ratkaisua. Ne olivat: kaasuttimen rakentaminen ja tuotekaasun poltto nykyisessä hiilipölykattilassa, hiilipölykattilan muuttaminen leijukerrospolttoon, uuden vastapainevoimalaitoksen rakentaminen, Suomenojalla olevan hiilivesikattilan muuttaminen puupolttoaineille, kivihiilen ja puun yhteispoltto hiilipölykattilassa puu/hiilipölypolttimilla sekä leijukerroskattilan rakentaminen ja sen yhdistäminen olemassa olevaan höyryturbiiniin. Taloudellisesti kannattaviksi ratkaisuiksi osoittautui kaksi viimeksi mainittua. Jos voimalaitostonttia halutaan säästää myöhempää maakaasuvoimalaitoshanketta varten, nousee puun ja kivihiilen yhteispoltto puu/hiilipölypolttimilla oleellisesti paremmaksi vaih-toehdoksi. Tämän vaihtoehdon korollinen takaisinmaksuaika on 7-11 vuotta, riippuen puunpolton laajuudesta. Kannattavuudelle on hyvin tärkeää puulla tuotetun sähkön tuki. Yhteispolton ansiosta hiilipölykattilan rikkidioksidi- ja hiilidioksidipäästöt sekä mahdollisesti myös typenoksidipäästöt vähenisivät. Puunpoltto lisää savukaasuvirtaa, nostaa savukaasun loppulämpötilaa ja mahdollisesti laskee hyötysuhdetta. Laitoksen rekkaliikenne lisääntyy. Kaikki esitetyt ratkaisuvaihtoehdot vähentäisivät hiilidioksidipäästöjä. Puunpolttoratkaisuilla ei kuitenkaan pystytä vähentämään Espoon Sähkön energiantuotannon hiilidioksidipäästöjä alle vuoden 1990 tason, mutta hiilidioksidin ominaispäästöissä edellä mainitun tason alle päästäisiin.

Mikrokontrolleriohjaus led-ryhmälle

Luonnonvarojen ehtyminen ja ympäristön saastuminen on luonut kysyntää uusille, energiaa säästäville ja ympäristöystävällisille teknologioille. Valaistuksessa tällainen teknologia on led-tekniikka. Led-tekniikalla on useita etuja verrattuna kilpaileviin tekniikoihin kuten pitkä elinikä, ympäristöystävällisyys ja mekaaninen kestävyys. Ledejä käytetään nykyään laajalti erilaisissa erikoissovelluksissa, erityisesti jos vaatimuksena on valon värillisyys. Näihin päiviin asti ledien hinta ja heikko valontuotto ovat rajoittaneet led-valaisimien yleistymistä hehkulamppujen ja muiden valaisintyyppien korvaajina. Tekniikan nopea kehittyminen on tehnyt led-tekniikasta varteenotettavan vaihtoehdon myös yleisvalaistukseen. Uusimpien valkoisten ledien valotehokkuus on 2 - 5 -kertainen hehkulamppuun verrattuna. Led-tekniikassa on vielä paljon käyttämätöntä potentiaalia, tulevaisuudessa päästäneen 10 - 15 -kertaiseen valotehokkuuteen hehkulamppuun verrattuna. Työssä suunnitellaan mikrokontrolleripohjainen ohjausjärjestelmä valkoista valoa tuottavalle led-valaisimelle, jonka värisävyä ja kirkkautta käyttäjä voi säätää. Valkoinen valo synnytetään sekoittamalla neljän erivärisen led-rivin valoa. Mikrokontrolleri ohjaa kutakin led-riviä väriensekoitusteoriaan perustuen. Mikrokontrolleriohjaus huomioi myös ledien optisten ominaisuuksien muutokset lämpötilan suhteen. Mikrokontrolleriohjauksen suorituskyky todetaan käytännön mittauksilla.

Trends and strategies of ozone application in environmental problems

Efforts presented by the scientific community in recent years towards the development of numerous green chemical processes and wastewater treatment technologies are presented and discussed. In the light of these approaches, environmentally friendly technologies, as well as the key role played by the well-known advanced oxidation processes, are discussed, giving special attention to the ones comprising ozone applications. Fundamentals and applied aspects dealing with ozone technology and its application are also presented.

Agricultural production and sustainable development in a Brazilian region (Southwest, Sao Paulo State): motivations and barriers to adopting sustainable and ecologically friendly practices

The objective of this study is to identify the adoption level of practices associated with more sustainable agriculture and environmentally friendly practices. Additionally, the motivations for and barriers to the adoption of these practices by farmers are investigated. Data were collected through closed questionnaires taken by a random sample of farmers in the Southwest, Sao Paulo, Brazil, during the second half of 2013. Overall, sustainable agricultural practices recommended in the literature and analysed in this study are being not fully adopted by farmers of the studied area. The results showed that financial motivation is associated with farmers adopting new, more sustainable technology, whereas the lack of information on and lack of technical support for these technologies are significant barriers. Other results, research implications, limitations and suggestions for future research are presented.

In the eye of the storm: exploring the introduction of environmental issues in the production function in Brazilian companies

This article aims to analyse the introduction of environmental issues in the context of the production function, which has been referred to as the organisational area to lead corporate environmental management. With that purpose, the theoretical references for corporate environmental management and the necessary alterations in production function have been organised to include environmental aspects, especially in terms of product and process development, quality management, and logistics. Considering that this research field still lacks empirical evidence for Brazilian companies, four case studies were conducted using companies located in the country. The environmental management maturity level of those companies tends to follow the rate with which the environmental issue is introduced in production sub-areas, especially in the product development process. However, in most cases we found that the companies had difficulties in structuring the insertion of the environmental dimension in logistics. The final notes point out the distance observed between what is recommended by international literature and the reality of Brazilian companies in the challenge of making the production function environmentally friendly.