HAWAIIAN SUGAR CANE RAT CONTROL METHODS AND PROBLEMS

The problem of rats in our Hawaiian sugar cane fields has been with us for a long time. Early records tell of heavy damage at various times on all the islands where sugar cane is grown. Many methods were tried to control these rats. Trapping was once used as a control measure, a bounty was used for a time, gangs of dogs were trained to catch the rats as the cane was harvested. Many kinds of baits and poisons were used. All of these methods were of some value as long as labor was cheap. Our present day problem started when the labor costs started up and the sugar industry shifted to long cropping. Until World War II cane was an annual crop. After the war it was shifted to a two year crop, three years in some places. Depending on variety, location, and soil we raise 90 to 130 tons of sugar cane per acre, which produces 7 to 15 tons of sugar per acre for a two year crop. This sugar brings about $135 dollars per ton. This tonnage of cane is a thick tangle of vegetation. The cane grows erect for almost a year, as it continues to grow it bends over at the base. This allows the stalk to rest on the ground or on other stalks of cane as it continues to grow. These stalks form a tangled mat of stalks and dead leaves that may be two feet thick at the time of harvest. At the same time the leafy growing portion of the stalk will be sticking up out of the mat of cane ten feet in the air. Some of these individual stalks may be 30 feet long and still growing at the time of harvest. All this makes it very hard to get through a cane field as it is one long, prolonged stumble over and through the cane. It is in this mat of cane that our three species of rats live. Two species are familiar to most people in the pest control field. Rattus norvegicus and Rattus rattus. In the latter species we include both the black rat and the alexandrine rats, their habits seem to be the same in Hawaii. Our third rat is the Polynesian rat, Rattus exlans, locally called the Hawaiian rat. This is a small rat, the average length head to tip of tail is nine inches and the average body weight is 65 grams. It has dark brownish fur like the alexandrine rats, and a grey belly. It is found in Indonesia, on most of the islands of Oceania and in New Zealand. All three rats live in our cane fields and the brushy and forested portions of our islands. The norway and alexandrine rats are found in and around the villages and farms, the Polynesian rat is only found in the fields and waste areas. The actual amount of damage done by rats is small, but destruction they cause is large. The rats gnaw through the rind of the cane stalk and eat the soft juicy and sweet tissues inside. They will hollow out one to several nodes per stalk attacked. The effect to the cane stalk is like ringing a tree. After this attack the stalk above the chewed portion usually dies, and sometimes the lower portion too. If the rat does not eat through the stalk the cane stalk could go on living and producing sugar at a reduced rate. Generally an injured stalk does not last long. Disease and souring organisms get in the injury and kill the stalk. And if this isn't enough, some insects are attracted to the injured stalk and will sometimes bore in and kill it. An injured stalk of cane doesn't have much of a chance. A rat may only gnaw out six inches of a 30 foot stalk and the whole stalk will die. If the rat only destroyed what he ate we could ignore them but they cause the death of too much cane. This dead, dying, and souring cane cause several direct and indirect tosses. First we lose the sugar that the cane would have produced. We harvest all of our cane mechanically so we haul the dead and souring cane to the mill where we have to grind it with our good cane and the bad cane reduces the purity of the sugar juices we squeeze from the cane. Rats reduce our income and run up our overhead.

BIRD CONTROL METHODS AND DEVICES--COMMENTS OF THE NATIONAL PEST CONTROL ASSOCIATION

It may be useful to review some of the considerations that go into recommendations concerning bird management. Later I will make some comments concerning specific methods and devices being used in or promoted for bird control work regardless of whether or not they are new. Members of the National Pest Control Association provide a variety of services, such as fumigation, termite control and general pest control which includes rodent control. There are eight such categories listed in our roster, but only one member in five provides every service listed. Bird control is a rather recent development and is the newest category of service to be listed in the NPCA roster where it appeared for the first time in 1959. As of September 1, 1966, 45% of our members' offices indicated that they were prepared to offer bird control service. Less than 40% did so in 1964. Why is it that more of our members do not declare themselves as ready to do bird control work? I believe the most common answer you would find is that bird control is not yet sufficiently established that they can provide a service comparable in quality to that which is provided against termites or cockroaches or rats. Our members simply do not want to jeopardize their reputation on methods that are not certain or are too complex. Others recognize the emotional reaction evidenced by much of the population concerning control of birds and do not want to become involved in work that might offend some of their clientele. Still others simply do not agree that birds are their responsibility.

Biofilms on exposed monumental stones: mechanism of formation and development of new control methods

Within the stone monumental artefacts artistic fountains are extremely favorable to formation of biofilms, giving rise to biodegradation processes related with physical-chemical and visual aspect alterations, because of their particular exposure conditions. Microbial diversity of five fountains (two from Spain and three from Italy) was investigated. It was observed an ample similarity between the biodiversity of monumental stones reported in literature and that one found in studied fountains. Mechanical procedures and toxic chemical products are usually employed to remove such phototrophic patinas. Alternative methods based on natural antifouling substances are recently experimented in the marine sector, due to their very low environmental impact and for the bio settlement prevention on partially immersed structures of ships. In the present work groups of antibiofouling agents (ABAs) were selected from literature for their ability to interfere, at molecular level, with the microbial communication system “quorum sensing”, inhibiting the initial phase of biofilm formation. The efficacy of some natural antibiofoulants agents (ABAs) with terrestrial (Capsaicine - CS, Cinnamaldehyde - CI) and marine origin (Zosteric Acid - ZA, poly-Alkyl Pyridinium Salts – pAPS and Ceramium botryocarpum extract - CBE), incorporated into two commercial coatings (Silres BS OH 100 - S and Wacker Silres BS 290 - W) commonly used in stone conservation procedures were evaluated. The formation of phototrophic biofilms in laboratory conditions (on Carrara marble specimens and Sierra Elvira stone) and on two monumental fountains (Tacca’s Fountain 2 - Florence, Italy and Fountain from Patio de la Lindaraja - Alhambra Palace, Granada, Spain) has been investigated in the presence or absence of these natural antifouling agents. The natural antibiofouling agents, at tested concentrations, demonstrated a certain inhibitory effect. The silane-siloxane based silicone coating (W) mixing with ABAs was more suitable with respect to ethyl silicate coating (S) and proved efficacy against biofilm formation only when incompletely cured. The laboratory results indicated a positive action in inhibiting the patina formation, especially for poly-alkyl pyridinium salts, zosteric acid and cinnamaldehyde, while on site tests revealed a good effect for zosteric acid.

An insulin infusion advisory system for type 1 diabetes patients based on non-linear model predictive control methods

In this paper, an Insulin Infusion Advisory System (IIAS) for Type 1 diabetes patients, which use insulin pumps for the Continuous Subcutaneous Insulin Infusion (CSII) is presented. The purpose of the system is to estimate the appropriate insulin infusion rates. The system is based on a Non-Linear Model Predictive Controller (NMPC) which uses a hybrid model. The model comprises a Compartmental Model (CM), which simulates the absorption of the glucose to the blood due to meal intakes, and a Neural Network (NN), which simulates the glucose-insulin kinetics. The NN is a Recurrent NN (RNN) trained with the Real Time Recurrent Learning (RTRL) algorithm. The output of the model consists of short term glucose predictions and provides input to the NMPC, in order for the latter to estimate the optimum insulin infusion rates. For the development and the evaluation of the IIAS, data generated from a Mathematical Model (MM) of a Type 1 diabetes patient have been used. The proposed control strategy is evaluated at multiple meal disturbances, various noise levels and additional time delays. The results indicate that the implemented IIAS is capable of handling multiple meals, which correspond to realistic meal profiles, large noise levels and time delays.

Coastal Erosion--Causes, Erosion Control Methods, Economic and Environmental Impacts, and Best Management Practices

Coastal erosion is an important and constant issue facing coastal areas all over the world today. The rate of coastal development over the years has increased, in turn requiring that action be taken to protect structures from the threat of erosion. A review of the causes of coastal erosion and the methods implemented to control it was conducted in order to determine the best course of action in response to coastal erosion issues. The potential positive and negative economic and environmental impacts are key concerns in determining whether or not to restore an eroding beach and which erosion control method(s) to implement. Results focus on providing a comparison of these concerns as well as recommendations for addressing coastal erosion issues.

An evaluation of cotton dust control systems in the picking and garnetting areas of the Atlanta Federal Penitentiary /

Mode of access: Internet.

Dust control for roads, airfields, and adjacent areas.

"30 September 1987."

Ash control methods to limit biomass inorganic content and its effect on fast pyrolysis bio-oil stability

This research investigates specific ash control methods to limit inorganic content within biomass prior to fast pyrolysis and effect of specific ash components on fast pyrolysis processing, mass balance yields and bio-oil quality and stability. Inorganic content in miscanthus was naturally reduced over the winter period from June (7.36 wt. %) to February (2.80 wt. %) due to a combination of senescence and natural leaching from rain water. September harvest produced similar mass balance yields, bio-oil quality and stability compared to February harvest (conventional harvest), but nitrogen content in above ground crop was to high (208 kg ha.-1) to maintain sustainable crop production. Deionised water, 1.00% HCl and 0.10% Triton X-100 washes were used to reduce inorganic content of miscanthus. Miscanthus washed with 0.10% Triton X-100 resulted in the highest total liquid yield (76.21 wt. %) and lowest char and reaction water yields (9.77 wt. % and 8.25 wt. % respectively). Concentrations of Triton X-100 were varied to study further effects on mass balance yields and bio-oil stability. All concentrations of Triton X-100 increased total liquid yield and decreased char and reaction water yields compared to untreated miscanthus. In terms of bio-oil stability 1.00% Triton X-100 produced the most stable bio-oil with lowest viscosity index (2.43) and lowest water content index (1.01). Beech wood was impregnated with potassium and phosphorus resulting in lower liquid yields and increased char and gas yields due to their catalytic effect on fast pyrolysis product distribution. Increased potassium and phosphorus concentrations produced less stable bio-oils with viscosity and water content indexes increasing. Fast pyrolysis processing of phosphorus impregnated beech wood was problematic as the reactor bed material agglomerated into large clumps due to char formation within the reactor, affecting fluidisation and heat transfer.

Pölynhallintamenetelmät rakentamisessa - tekninen toteutus ja menetelmien tehokkuus

Rakennustyömaa on yksi vaarallisimpia ja työolosuhteiltaan haastavimpia työpaikkoja. Sisävalmistusvaiheessa ongelmaksi muodostuu töiden tuottama pöly ja melu. Työmaan epäjärjestys ja likaisuus lisäävät tapaturmariskiä. Pölytöntä rakennustyömaata ei ole olemassa ja tästä syystä pölynhallinta muodostuu merkittäväksi tekijäksi pölyn leviämisen rajoittamisessa. Työn tavoitteena oli tutkia teknisiä pölynhallintakeinoja, joilla voidaan vähentää henkilökohtaisen suojauksen tarvetta rakennustyömailla. Pölynhallintaan työmailla voidaan vaikuttaa työtapojen ja -menetelmien valinnalla, töiden vaiheistuksella, kohdepoistoilla, osastoinnilla ja alipaineistuksella. Työssä oli tarkoitus myös verrata ja tutkia erilaisten ja eri työvaiheisiin tarkoitettujen pölynhallintalaitteistojen toimintaa ja niiden toimivuutta pölynhallinnassa. Tämä tutkimus toteutettiin Savocon Oy:n Kuopioon rakennettavan Turontähden rakennustyömaalla huhti- ja toukokuussa 2008. Tutkimusten perusteella tekniset pölynhallintakeinot toimivat kohtalaisen hyvin. Hiomalaitteissa pölynhallinta on tekninen ominaisuus, mutta sen toimivuus riippuu myös siitä, osaako työntekijä hyödyntää pölynhallintaa oikealla tavalla. Toimintaan vaikuttaa se, osaavatko laitteen käyttäjät asettaa imutehon sellaiseksi, että se on riittävän suuri poistamaan pölyn, mutta ei liian suuri haitatakseen työntekoa ja saaden aikaan heikkoa työnjälkeä. Oikeat laiteasetukset opitaan kokeilemalla. Imutehon säätömahdollisuus on erilaisten pintatasoitteiden myötä erityisen tärkeä laiteominaisuus. Timanttihiomalaitteilla saavutetut pölynpoistotehokkuudet olivat kaikki yli 97 prosenttia, kun niiden tehoa verrattiin ilman pölynpoistoa tapahtuvaan timanttihiontaan. Timanttihiontaa ei suositella tehtäväksi ilman pölynpoistotekniikkaa, sillä pölyntuotto on suurta ja pölypitoisuudet nousevat nopeasti hyvin suuriksi ja työntekijöiden altistus pölylle kasvaa. Ilmanpuhdistimien tehot riittivät pienen tilan ilman puhdistamiseen, mutta suurissa tiloissa ja suurissa pitoisuuksissa teho jäi riittämättömäksi. Oikein mitoitettuina ilmanpuhdistimia voidaan suositella kohdepoistolla toimivien laitteiden lisäksi huonetilaan puhdistamaan vähäiset hiukkaspäästöt, joita laitteista tulee. Teollisuusimurien valinnassa huomio tulee kiinnittää moottorin imutehoon, moottorin jäähdytyksen järjestelyyn, pölypussin materiaaliin ja pölypussin tyhjennysmekanismiin. Näillä on suuri merkitys siivoustyön pölyttömämpään lopputulokseen. Tämän työn käyttö markkinointitarkoituksessa ilman tekijän lupaa on kielletty.

Modélisation de l’exposition à la silice cristalline dans le secteur de la construction

L’exposition prolongée par inhalation à des poussières de taille respirable contenant de la silice cristalline est reconnue pour causer des maladies respiratoires dont le cancer du poumon et la silicose. De nombreuses études ont relevé la surexposition des travailleurs de la construction à la silice cristalline, puisque ce composé est présent dans de nombreux matériaux utilisés sur les chantiers. L’évaluation de l’exposition à la silice cristalline dans cette industrie constitue un défi en raison de la multitude de conditions de travail et de la nature éphémère des chantiers. Afin de mieux cerner cette problématique, une banque de données d’exposition professionnelle compilée à partir de la littérature a été réalisée par une équipe de l’Université de Montréal et de l’IRSST, et constitue le point de départ de ce travail. Les données présentes dans la banque ont été divisées en fonction de la stratégie d’échantillonnage, résultant en deux analyses complémentaires ayant pour objectif d’estimer les niveaux d’exposition sur le quart de travail en fonction du titre d’emploi, et selon la nature de la tâche exécutée. La méthode de Monte Carlo a été utilisée pour recréer les échantillons provenant de données rapportées sous forme de paramètres de synthèse. Des modèles Tobit comprenant les variables de titre d’emploi, tâche exécutée, durée, année et stratégie d’échantillonnage, type de projet, secteur d’activité, environnement et moyens de maîtrise ont été développés et interprétés par inférence multimodèle. L’analyse basée sur le quart de travail a été réalisée à partir de 1346 données d’exposition couvrant 11 catégories de titre d’emploi. Le modèle contenant toutes les variables a expliqué 22% de la variabilité des mesures et la durée, l’année et la stratégie d’échantillonnage étaient d’importants prédicteurs de l’exposition. Les chantiers de génie civil et les projets de nouvelle construction étaient associés à des expositions plus faibles, alors que l’utilisation de moyens de maîtrise diminuait les concentrations de 18% à l’extérieur et de 24% à l’intérieur. Les moyennes géométriques les plus élevées prédites pour l’année 1999 sur 8 heures étaient retrouvées chez les foreurs (0.214 mg/m3), les travailleurs souterrains (0.191 mg/m3), les couvreurs (0.146 mg/m3) et les cimentiers-applicateurs (0.125 mg/m3). 1566 mesures réparties en 27 catégories de tâches étaient contenues dans la seconde analyse. Le modèle contenant toutes les variables a expliqué 59% des niveaux d’exposition, et l’ensemble des variables contextuelles étaient fortement prédictives. Les moyennes géométriques prédites pour l’année 1998 et selon la durée médiane par tâche dans la banque de données étaient plus élevées lors du bouchardage du béton (1.446 mg/m3), du cassage de pièces de maçonnerie avec autres outils (0.354 mg/m3), du décapage au jet de sable (0.349 mg/m3) et du meulage de joints de brique (0.200 mg/m3). Une diminution importante des concentrations a été observée avec les systèmes d’arrosage (-80%) et d’aspiration des poussières (-64%) intégrés aux outils. L’analyse en fonction des titres d’emploi a montré une surexposition généralisée à la valeur guide de l’ACGIH et à la norme québécoise, indiquant un risque à long terme de maladies professionnelles chez ces travailleurs. Les résultats obtenus pour l’évaluation en fonction de la tâche exécutée montrent que cette stratégie permet une meilleure caractérisation des facteurs associés à l’exposition et ainsi de mieux cibler les priorités d’intervention pour contrôler les niveaux d’exposition à la silice cristalline sur les chantiers de construction durant un quart de travail.

Determination and Evaluation of Alternate Methods for Managing and Controlling Highway-Related Dust, TR-449, 2002

Road dust is caused by wind entraining fine material from the roadway surface and the main source of Iowa road dust is attrition of carbonate rock used as aggregate. The mechanisms of dust suppression can be considered as two processes: increasing particle size of the surface fines by agglomeration and inhibiting degradation of the coarse material. Agglomeration may occur by capillary tension in the pore water, surfactants that increase bonding between clay particles, and cements that bind the mineral matter together. Hygroscopic dust suppressants such as calcium chloride have short durations of effectiveness because capillary tension is the primary agglomeration mechanism. Somewhat more permanent methods of agglomeration result from chemicals that cement smaller particles into a mat or larger particles. The cements include lignosulfonates, resins, and asphalt products. The duration of the cements depend on their solubility and the climate. The only dust palliative that decreases aggregate degradation is shredded shingles that act as cushions between aggregate particles. It is likely that synthetic polymers also provide some protection against coarse aggregate attrition. Calcium chloride and lignosulfonates are widely used in Iowa. Both palliatives have a useful duration of about 6 months. Calcium chloride is effective with surface soils of moderate fine content and plasticity whereas lignin works best with materials that have high fine content and high plasticity indices. Bentonite appears to be effective for up to two years and works well with surface materials having low fines and plasticity and works well with limestone aggregate. Selection of appropriate dust suppressants should be based on characterization of the road surface material. Estimation of dosage rates for potential palliatives can be based on data from this report, from technical reports, information from reliable vendors, or laboratory screening tests. The selection should include economic analysis of construction and maintenance costs. The effectiveness of the treatment should be evaluated by any of the field performance measuring techniques discussed in this report. Novel dust control agents that need research for potential application in Iowa include; acidulated soybean oil (soapstock), soybean oil, ground up asphalt shingles, and foamed asphalt. New laboratory evaluation protocols to screen additives for potential effectiveness and determine dosage are needed. A modification of ASTM D 560 to estimate the freeze-thaw and wet-dry durability of Portland cement stabilized soils would be a starting point for improved laboratory testing of dust palliatives.

Control of Aedes vectors of dengue in three provinces of Vietnam by use of Mesocyclops (Copepoda) and community-based methods validated by entomologic, clinical, and serological surveillance

We describe remarkable success in controlling dengue vectors, Aedes aegypti (L.) and Aedes albopictus (Skuse), in 6 communes with 11,675 households and 49,647 people in the northern provinces of Haiphong, Hung Yen, and Nam Dinh in Vietnam. The communes were selected for high-frequency use of large outdoor concrete tanks and wells. These were found to be the source of 49.6-98.4% of Ae. aegypti larvae, which were amenable to treatment with local Mesocyclops, mainly M. woutersi Van der Velde, M. aspericornis (Daday) and M. thermocyclopoides Harada. Knowledge, attitude, and practice surveys were performed to determine whether the communities viewed dengue and dengue hemorrhagic fever as a serious health threat; to determine their knowledge of the etiology, attitudes, and practices regarding control methods including Mesocyclops; and to determine their receptivity to various information methods. On the basis of the knowledge, attitude, and practice data, the community-based dengue control program comprised a system of local leaders, health volunteer teachers, and schoolchildren, supported by health professionals. Recycling of discards for economic gain was enhanced, where appropriate, and this, plus 37 clean-up campaigns, removed small containers unsuitable for Mesocyclops treatment. A previously successful eradication at Phan Boi village (Hung Yen province) was extended to 7 other villages forming Di Su commune (1,750 households) in the current study. Complete control was also achieved in Nghia Hiep (Hung Yen province) and in Xuan Phong (Nam Dinh province); control efficacy was greater than or equal to 99.7% in the other 3 communes (Lac Vien in Haiphong, Nghia Dong, and Xuan Kien in Nam Dinh). Although tanks and wells were the key container types of Ae. aegypti productivity, discarded materials were the source of 51% of the standing crop of Ae. albopictus. Aedes albopictus larvae were eliminated from the 3 Nam Dinh communes, and 86-98% control was achieved in the other 3 communes. Variable dengue attack rates made the clinical and serological comparison of control and untreated communes problematic, but these data indicate that clinical surveillance by itself is inadequate to monitor dengue transmission.

Bullwhip effect, in production control: a comparison between traditional methods and LPS

21th Annual Conference of the International Group for Lean Construction (IGLC 21), July 2013, Fortaleza, Brazil

Surface Improvement and Dust Palliation of Unpaved Secondary Roads and Streets, Progress Report, HR-151, 1971

A combined study of dust control and low-cost surface improvements of soil and aggregate materials for immediate (and intermediate) use as a treated surface course is being conducted in three concurrent phases: (1) laboratory screening of various additives thought to have potential for long-lasting dust palliation, soil-additive strength, durability, and additive retention potential; (2) test road construction, using those additives from the screening studies that indicate promise for performance and serviceability; and (3) observation and tests of constructed sections for evaluation of the additive's contribution to performance and serviceability as well as relationship to initial costs. A brief review is presented of the problem, some methods of measuring it, previously adopted approaches to it, project field tests and a portion of the results thus far, and portions of the laboratory work accomplished in the screening studies.