Artful surfaces : an ethnographic study exploring the use of space in design studios

A largely overlooked aspect of creative design practices is how physical space in design studios plays a role in supporting designers' everyday work. In particular, studio surfaces such as designers' desks, office walls, notice boards, clipboards and drawing boards are full of informative, inspirational and creative artefacts such as, sketches, drawings, posters, story-boards and Post-it notes. Studio surfaces are not just the carriers of information but importantly they are sites of methodic design practices, i.e. they indicate, to an extent, how design is being carried out. This article describes the results of an ethnographic study on the use of workplace surfaces in design studios, from two academic design departments. Using the field study results, the article introduces an idea of ‘artful surfaces’. Artful surfaces emphasise how artfully designers integrate these surfaces into their everyday work and how the organisation of these surfaces comes about helping designers in accomplishing their creative and innovative design practices. Using examples from the field study, the article shows that artful surfaces have both functional and inspirational characteristics. From the field study, three types of artful surfaces are identified: personal; shared; and project-specific. The article suggests that a greater insight into how these artful surfaces are created and used could lead to better design of novel display technologies to support designers' everyday work.

Experiential role of artefacts in cooperative design

The role of material artefacts in supporting distributed and co-located work practices has been well acknowledged within HCI and CSCW research. In this paper, we show that in addition to their ecological, coordinative and organizational support, artefacts also play an 'experiential' role. In this case, artefacts not only improve efficiency or have a purely functional role (e.g. allowing people to complete tasks quickly), but the materiality, use and manifestations of these artefacts bring quality and richness to people's performance and help them make better sense of their everyday lives. In a domain such as industrial design, such artefacts play an important role for supporting creativity and innovation. Based on our ethnographic fieldwork on understanding cooperative design practices of industrial design students and researchers, we describe several experiential practices that are supported by design-related artefacts such as sketches, drawings, physical models and explorative prototypes -- used and developed in designers' everyday work. Our main intention in carrying out this kind of research is to develop technologies to support designers' everyday practices. We believe that with the emergence of ubiquitous computing, there is a growing need to focus on the personal, social and creative side of people's everyday experiences. By focusing on the experiential practices of designers, we can provide a much broader view in the design of new interactive technologies.

STEM learning through engineering design: fourth-grade students' investigations in aerospace

Background: Internationally, there is a growing concern for developing STEM education to prepare students for a scientifically and technologically advanced society. Despite educational bodies lobbying for an increased focus on STEM, there is limited research on how engineering might be incorporated especially in the elementary school curriculum. A framework of five comprehensive core engineering design processes (problem scoping, idea generation, design and construction, design evaluation, redesign), adapted from the literature on design thinking in young children, served as a basis for the study. We report on a qualitative study of fourth-grade students’ developments in working an aerospace problem, which took place during the first year of a 3-year longitudinal study. Students applied design processes together with their mathematics and science knowledge to the design and redesign of a 3-D model plane. Results: The study shows that through an aerospace engineering problem, students could complete initial designs and redesigns of a model plane at varying levels of sophistication. Three levels of increasing sophistication in students’ sketches were identified in their designs and redesigns. The second level was the most prevalent involving drawings or templates of planes together with an indication of how to fold the materials as well as measurements linked to the plane’s construction. The third level incorporated written instructions and calculations. Students’ engagement with each of the framework’s design processes revealed problem scoping components in their initial designs and redesigns. Furthermore, students’ recommendations for improving their launching techniques revealed an ability to apply their mathematics knowledge in conjunction with their science learning on the forces of flight. Students’ addition of context was evident together with an awareness of constraints and a consideration of what was feasible in their design creation. Interestingly, students’ application of disciplinary knowledge occurred more frequently in the last two phases of the engineering framework (i.e., design evaluation and redesign), highlighting the need for students to reach these final phases to enable the science and mathematics ideas to emerge. Conclusions: The study supports research indicating young learners’ potential for early engineering. Students can engage in design and redesign processes, applying their STEM disciplinary knowledge in doing so. An appropriate balance is needed between teacher input of new concepts and students’ application of this learning in ways they choose. For example, scaffolding by the teacher about how to improve designs for increased detail could be included in subsequent experiences. Such input could enhance students’ application of STEM disciplinary knowledge in the redesign process. We offer our framework of design processes for younger learners as one way to approach early engineering education with respect to both the creation of rich problem experiences and the analysis of their learning.

An interactive graphics system for 2-D drawing and design

This paper is about a software system, GRASS-Graphic Software System for 2-D drawing and design—which has been implemented on a PDP-11/35 system with RSX-11M operating system. It is a low cost interactive graphics system for the design of two dimensional drawings and uses a minimum of hardware. It provides comprehensive facilities for creating, editing, storing and retrieving pictures. It has been implemented in the language Pascal and has the potential to be used as a powerful data-imputting tool for a design-automation system. The important features of the system are its low cost, software character generation and a user-trainable character recognizer, which has been included.

Rockhampton's Resilient Future Design Charrette

The QUT Centre for Subtropical Design conducted a design-led interdisciplinary collaborative workshop (charrette) to develop some initial ideas for how innovation in research and practice can be applied to the complex problem of resilient future-focussed urban renewal in Rockhampton’s flood-prone suburbs and core grid. Three creative teams explored a range of scenarios for Rockhampton’s resilience in built form over the longer term. A large number of sketches, drawings and text were produced over two days. This report identifies themes, principles and strategies which emerged from the charrette. Each group proposed multiple guiding principles that fell into three strategic approaches: defend (through construction of a levee); adapt (by designing with flood in mind); retreat (a long term view to relocate populations in flood-prone areas). All three groups identified the importance of design that accommodates art, heritage, recreation, sustainability and tourism, and proposed these as principles to guide future strategies that mediate between Rockhampton’s broader ecological landscape and urban living to accommodate more affordable housing options, demonstrate sustainability and be climate responsive to predicted increased extreme weather events including flooding. The charrette outcomes pave the way to investigate wider issues and solutions to Rockhampton’s resilient future, beyond a levee as an isolated structure.

Design of an oxygen flow meter for hospital application

A general description of the need for hospital flow meters is given along with an analysis of some common flow measurement methods.

The design criteria, establishment of the basic configuration of the instrument, and the evolution of the final design are presented in detail. The ability of the magnetic crossover mechanism to extract the square root of an input is explained, and design curves are presented. The action of the flow totalizer is described in relation to the rest of the instrument. A complete set of manufacturing drawings for the instrument and its tooling is included in the thesis.

In conclusion, an evaluation of the completed instrument is made, and improvements and modifications are indicated. Mention is made of the adaptability of the magnetic crossover mechanism to other instrumentation.

An exploration through interview and drawings of the experiences of patients diagnosed with oral cancer across their cancer trajectory

Background: The treatment of oral cancer is complex and lengthy. Curative treatment implies a combination of surgery, radiotherapy and chemotherapy. The main goal of treatment is to guarantee long-term tumour free survival with as little functional and cosmetic damage. Despite progress in developing these strategies, cancers of the oral cavity continue to have high mortality rates that have not improved dramatically over the past ten years. Aim: The aim of this study was to uniquely explore the dynamic changes in the physical, psychological, social and existential experiences of newly diagnosed patients with oral cancer at two points across their cancer illness trajectory i.e. at the time of diagnosis and at the end of treatment. Methodology: A qualitative prospective longitudinal design was employed. Non-probability purposive sampling allowed the recruitment of 10 participants. The principal data collection method used was a digital audio taped semi-structured interview along with drawings produced by the participants. Analysis: Data was analysed using latent content analyses. Summary: Three ‘dynamic’ themes, physical, psychosocial and existential experiences were revealed that interact and influence each other in a complex and compound whole. These experiences are present at different degrees and throughout the entire trajectory of care. Patients have a number of specific concerns and challenges that cannot be compartmentalised into unitary or discrete aspects of their daily lives. Conclusion & Implications: An understanding of the patient’s experience of their illness at all stages of the disease trajectory, is essential to inform service providers’ decision making if the delivery of care is to be client centred. Dynamic and fluctuating changes in the patient’s personal experience of the cancer journey require dynamic, energetic and timely input from health care professionals.

Application of Heuristic Evaluation Method by Universal Design Experts

This study highlights how heuristic evaluation as a usability evaluation method can feed into current building design practice to conform to universal design principles. It provides a definition of universal usability that is applicable to an architectural design context. It takes the seven universal design principles as a set of heuristics and applies an iterative sequence of heuristic evaluation in a shopping mall, aiming to achieve a cost-effective evaluation process. The evaluation was composed of three consecutive sessions. First, five evaluators from different professions were interviewed regarding the construction drawings in terms of universal design principles. Then, each evaluator was asked to perform the predefined task scenarios. In subsequent interviews, the evaluators were asked to re-analyze the construction drawings. The results showed that heuristic evaluation could successfully integrate universal usability into current building design practice in two ways: (i) it promoted an iterative evaluation process combined with multi-sessions rather than relying on one evaluator and on one evaluation session to find the maximum number of usability problems, and (ii) it highlighted the necessity of an interdisciplinary ad hoc committee regarding the heuristic abilities of each profession. A multi-session and interdisciplinary heuristic evaluation method can save both the project budget and the required time, while ensuring a reduced error rate for the universal usage of the built environments.

A frágil totalidade: o significado do desenho no projecto de design: poética e técnica

A presente investigação procura contribuir para o estudo e desenvolvimento da disciplina de design partindo da análise e interpretação da prática do desenho no âmbito do projecto. A escolha dos objectos de estudo – desenhos de projecto de designers e arquitectos nacionais – procura validar a classificação do projecto através da análise dos desenhos dos autores. Procuramos a relação entre desenho e design propondo como hipótese que a diferença ontológica entre ambos derive da condição fenomenológica que cada uma das disciplinas estabelece na relação com a outra. A partir da bibliografia proposta procedeu-se à reflexão crítica com vista à consideração teórica acerca do desenho, particularmente, na sua relação com o projecto. Num primeiro momento analisamos ontologicamente a prática do desenho mantendo como referência a possibilidade da sua origem no disegno florentino como fundador da disciplina, competência ao serviço de outras disciplinas, quer artísticas quer científicas e do seu desenvolvimento na prática da cultura ocidental. Num segundo momento discutimos o desenho na prática do projecto partindo da consideração teórica do desenho como resultado da triangulação imaginação – classificação – representação e do design como resultado da triangulação autor – tecnologia – programa. Interpretando o desenho como um campo operativo alargado interessou-nos o estudo do porquê e de como o desenho intervém, condicionando e/ou participando na prática e pensamento em design. Num terceiro momento interpretamos os desenhos dos autores escolhidos. Fundamentalmente analisa-se em que medida a representação (desenho) intervém no desenvolvimento da ideia (projecto) considerando as técnicas (meios) da representação. Atribui-se como finalidade contribuir para o debate crítico dentro da disciplina do design, cruzando práticas que embora relacionadas são distintas do ponto de vista epistemológico. Espera-se assim o enriquecimento da cada uma delas estimulando a possibilidade da sua prática interdisciplinar. Do ponto de vista da aplicação prática a investigação prevê a criação de um arquivo de desenho de projecto que, de entre outros, posteriormente, permitirá o estudo comparado dos desenhos com a obra realizada de cada autor.

Embarcações tradicionais da Ria de Aveiro: uma análise pelo design

Perante o estado de perda de grande parte do património móvel, material e imaterial, lagunar, e da consequente desvalorização identitária da região, nomeadamente, das embarcações tradicionais da Ria de Aveiro, surgiu a necessidade de efectuar um levantamento desse património e de o caracterizar. Para tal, delimitamos o estudo no espaço e no tempo. O território abrange a grande área lagunar do Distrito de Aveiro, denominada de Ria de Aveiro, com uma extensão de cerca de 47km, de norte a sul - de Ovar a Mira - incluindo as lagoas adjacentes: Barrinha de Mira, Lagoa e a Pateira de Fermentelos. No tempo, marcamos como referência, o início do século XIX até à actualidade. A partir do ano de 1808, a laguna adquire uma configuração morfológica, perto da actual e condições de navegabilidade estáveis para as embarcações tradicionais, devido à fixação da Barra do Porto de Aveiro. Após realizar as primeiras pesquisas, apoiados em fontes bibliográficas, iconográficas e videográficas apercebemo-nos da dispersão da informação existente e das poucas obras que abordam o tema. Desta forma, sentiu-se a necessidade de realizar uma pesquisa de campo, que contextualizasse e aportasse informação pertinente ao tema em estudo. Iniciamos a pesquisa de campo, utilizando as técnicas da observação passiva e activa, e do registo de imagem, vídeo, áudio e gráfico. Realizamos entrevistas, assistimos a processos de construção, efectuamos levantamentos e anotações de medidas, elaboramos esquissos de pormenores, apoiados nas ferramentas da Etnografia e do Design e participamos em eventos ligados à temática. Realizamos um levantamento das embarcações existentes, localizando-as e contextualizando-as no território regional. Descrevemo-las, analisamos a sua forma, função, estética, e o processo construtivo, e com base na análise de outros trabalhos, apresentamos uma proposta classificativa, por tipologias, para as embarcações tradicionais da Ria de Aveiro. Com base na comparação dos desenhos das embarcações procuramos alguns marcadores genéticos comuns, caracterizadores e transmissores da identidade do nosso património lagunar. Recolhemos, observámos e procuramos entender a problemática subjacente a este tema. Por fim, elaboramos um ensaio conclusivo sobre essa problemática da perda do património lagunar móvel, na contemporaneidade, classificando-o, e obtendo resultados que nos elucidam sobre a actual situação, e anunciam uma previsão futura de perda total, caso não se registem urgentes intervenções estratégicas para minimizar e travar esta realidade.

Design e desenvolvimento de equipamentos de iluminação técnica

Este documento é uma sinopse das atividades desenvolvidas e, conhecimentos adquiridos ao longo do estágio na empresa Lightenjin, Sistemas de Iluminação, Lda. e, surge em forma de relatório de projeto. O primeiro projeto foi o desenvolvimento de uma família de candeeiros. O segundo e principal projeto foi a criação e desenvolvimento de um projetor para aplicação em calha eletrificada, com as devidas restrições do Project brief apresentado pela empresa. O terceiro projeto foi o desenvolvimento de um projetor Downlight de encastrar. Houve outras tarefas ligadas à modelação de componentes, desenhos técnicos, manuais de instruções, fichas técnicas e prototipagem rápida. Em todos os projetos foi utilizada a metodologia de trabalho apresentada.

Élaboration de critères de design pour un outil de communication médecin-patient

Le système de santé d'aujourd'hui fait appel à de nombreuses technologies de l'information nommées TIS (Technologies de l’Information en Santé). Celles-ci ont donné naissance à de nouvelles formes d’interaction médecin-patient et ont complexifié l'approche thérapeutique dite
« centrée sur le patient ». Les TIS promettent une plus grande efficacité et l’augmentation de la satisfaction des patients par le biais d’une meilleure compréhension de la maladie pour le patient. Or, elles peuvent également devenir des sources de conflit pour le professionnel de la santé, étant donné leur utilisation en dehors des rencontres cliniques ainsi que leur tendance à agir comme des barrières communicationnelles lors des consultations. Cette recherche vise a étudier les critères de design nécessaires à la conception d’un TIS pouvant améliorer la relation médecin-patient et donc, faciliter la communication et améliorer l’alliance thérapeutique. L’étude utilise une approche centrée sur l’utilisateur et vise donc à comprendre les besoins et les attentes des médecins et des patients. En étudiant les nouvelles approches en santé et les TIS, il a été possible de comprendre le contexte et les besoins des utilisateurs en terme de communication. Ces derniers sont primordiaux au processus dit centré sur l’utilisateur. Le faible taux de rétention du discours du médecin devient une barrière communicationnelle importante, tout comme le temps pressurisé. La recherche nous montre que l’ajout d’un outil virtuel de vulgarisation peut, à l’aide de média visuels (tel que des modélisations, des animations 3D et des dessins), grandement aider la relation médecin-patient.

Research by design : a research strategy

The idea of an expressive component in research is important to the architectural industry. The expressive element - the possibility of expressing the qualitative aspects of the world and adding something new to the existing through experiments and proposals - is characteristic for the field. All research environments, in the science tradition and in the humanities, have their characteristics. On the one hand, they live up to certain common scientific and methodological criteria - originality and transparency – and on the other hand, they have different practices, using different methods. Research is ‘coloured’ by traditions and professions, and research in architecture should be coloured too, taking into consideration that the practice of architects stretches from natural science and sociology to art and that the most important way in which the architect achieves new cognition is through work with form and space – drawings, models and completed works. Probably all good design is informed by some kind of research – research- based design. But can research arise from design?

Knowledge practices in design: The role of visual representations as 'epistemic objects'

We use a detailed study of the knowledge work around visual representations to draw attention to the multidimensional nature of `objects'. Objects are variously described in the literatures as relatively stable or in flux; as abstract or concrete; and as used within or across practices. We clarify these dimensions, drawing on and extending the literature on boundary objects, and connecting it with work on epistemic and technical objects. In particular, we highlight the epistemic role of objects, using our observations of knowledge work on an architectural design project to show how, in this setting, visual representations are characterized by a `lack' or incompleteness that precipitates unfolding. The conceptual design of a building involves a wide range of technical, social and aesthetic forms of knowledge that need to be developed and aligned. We explore how visual representations are used, and how these are meaningful to different stakeholders, eliciting their distinct contributions. As the project evolves and the drawings change, new issues and needs for knowledge work arise. These objects have an `unfolding ontology' and are constantly in flux, rather than fully formed. We discuss the implications for wider understandings of objects in organizations and for how knowledge work is achieved in practice.

Using artefacts to mediate understanding in design conversations

The journey from the concept of a building to the actual built form is mediated with the use of various artefacts, such as drawings, product samples and models. These artefacts are produced for different purposes and for people with different levels of understanding of the design and construction processes. This paper studies design practice as it occurs naturally in a real-world situation by observing the conversations that surround the use of artefacts at the early stages of a building's design. Drawing on ethnographic data, insights are given into how the use of artefacts can reveal a participant's understanding of the scheme. The appropriateness of the method of conversation analysis to reveal the users' understanding of a scheme is explored by observing spoken micro-interactional behaviours. It is shown that the users' understanding of the design was developed in the conversations around the use of artefacts, as well as the knowledge that is embedded in the artefacts themselves. The users' confidence in the appearance of the building was considered to be gained in conversation, rather than the ability of the artefacts to represent a future reality.