Municipal solid waste management in the Caribbean: a benefit-cost analysis

Includes bibliography

Life cycle assessment in construction field: A life cycle cost analysis of reinforcement concrete bridge

The present work is included in the context of the assessment of sustainability in the construction field and is aimed at estimating and analyzing life cycle cost of the existing reinforced concrete bridge “Viadotto delle Capre” during its entire life. This was accomplished by a comprehensive data collection and results evaluation. In detail, the economic analysis of the project is performed. The work has investigated possible design alternatives for maintenance/rehabilitation and end-of-life operations, when structural, functional, economic and also environmental requirements have to be fulfilled. In detail, the economic impact of different design options for the given reinforced concrete bridge have been assessed, whereupon the most economically, structurally and environmentally efficient scenario was chosen. The Integrated Life-Cycle Analysis procedure and Environmental Impact Assessment were also discussed in this work. The scope of this thesis is to illustrate that Life Cycle Cost analysis as part of Life Cycle Assessment approach could be effectively used to drive the design and management strategy of new and existing structures. The final objective of this contribution is to show how an economic analysis can influence decision-making in the definition of the most sustainable design alternatives. The designers can monitor the economic impact of different design strategies in order to identify the most appropriate option.

[Cost analysis of contrast-enhanced cranial MRI at a German university hospital]

Detailed evaluation and cost analysis of a cranial contrast-enhanced MRI (c-ceMRI) in outpatients, inpatients, patients in an intensive care unit and children under anesthesia.

Treatment failure in pneumonia: Impact of antibiotic treatment and cost analysis

The aim of this study was to investigate treatment failure (TF) in hospitalised community-acquired pneumonia (CAP) patients with regard to initial antibiotic treatment and economic impact. CAP patients were included in two open, prospective multicentre studies assessing the direct costs for in-patient treatment. Patients received treatment either with moxifloxacin (MFX) or a nonstandardised antibiotic therapy. Any change in antibiotic therapy after >72 h of treatment to a broadened antibiotic spectrum was considered as TF. Overall, 1,236 patients (mean ± SD age 69.6 ± 16.8 yrs, 691 (55.9%) male) were included. TF occurred in 197 (15.9%) subjects and led to longer hospital stay (15.4 ± 7.3 days versus 9.8 ± 4.2 days; p < 0.001) and increased median treatment costs (€2,206 versus €1,284; p<0.001). 596 (48.2%) patients received MFX and witnessed less TF (10.9% versus 20.6%; p < 0.001). After controlling for confounders in multivariate analysis, adjusted risk of TF was clearly reduced in MFX as compared with β-lactam monotherapy (adjusted OR for MFX 0.43, 95% CI 0.27-0.68) and was more comparable with a β-lactam plus macrolide combination (BLM) (OR 0.68, 95% CI 0.38-1.21). In hospitalised CAP, TF is frequent and leads to prolonged hospital stay and increased treatment costs. Initial treatment with MFX or BLM is a possible strategy to prevent TF, and may thus reduce treatment costs.

Statins for cardiovascular prevention according to different strategies: a cost analysis

Several studies have shown that treatment with HMG-CoA reductase inhibitors (statins) can reduce coronary heart disease (CHD) rates. However, the cost effectiveness of statin treatment in the primary prevention of CHD has not been fully established.

Health Care Cost Analysis

This afternoon you will be working on descriptive statistics, such as what is the total number of discharges in the state of Montana for a given Diagnosis Related Group (DRG), what is the average payment of a given DRG, and what is the range of payments of a given DRG. We will also formulate and solve a statistical question such as is there a relationship between the size of a hospital and the average payment of a given DRG.

Three-year cost analysis of function-centred versus pain-centred inpatient rehabilitation in patients with chronic non-specific low back pain

OBJECTIVE: To compare costs of function- and pain-centred inpatient treatment in patients with chronic low back pain over 3 years of follow-up. DESIGN: Cost analysis of a randomized controlled trial. PATIENTS: A total of 174 patients with chronic low back pain were randomized to function- or pain-centred inpatient treatment. METHODS: Data on direct and indirect costs were gathered by questionnaires sent to patients, health insurance providers, employers, and the Swiss Disability Insurance Company. RESULTS: There was a non-significant difference in total medical costs after 3 years' follow-up. Total costs were 77,305 Euros in the function-centred inpatient treatment group and 83,085 Euros in the pain-centred inpatient treatment group. Likewise, indirect costs after 3 years from lost work days were non-significantly lower in the function-centred in-patient treatment group (6354 Euros; 95% confidence interval -20,892, 8392) and direct medical costs were non-significantly higher in the function-centred inpatient treatment group (574 Euros; 95% confidence interval -862, 2011). CONCLUSION: The total costs of function-centred and pain-centred inpatient treatment were similar over the whole 3-year follow-up.

Cost analysis of opt-in consent procedures for the Texas statewide immunization information system, ImmTrac

Background. Childhood immunization programs have dramatically reduced the morbidity and mortality associated with vaccine-preventable diseases. Proper documentation of immunizations that have been administered is essential to prevent duplicate immunization of children. To help improve documentation, immunization information systems (IISs) have been developed. IISs are comprehensive repositories of immunization information for children residing within a geographic region. The two models for participation in an IIS are voluntary inclusion, or "opt-in," and voluntary exclusion, or "opt-out." In an opt-in system, consent must be obtained for each participant, conversely, in an opt-out IIS, all children are included unless procedures to exclude the child are completed. Consent requirements for participation vary by state; the Texas IIS, ImmTrac, is an opt-in system.^ Objectives. The specific objectives are to: (1) Evaluate the variance among the time and costs associated with collecting ImmTrac consent at public and private birthing hospitals in the Greater Houston area; (2) Estimate the total costs associated with collecting ImmTrac consent at selected public and private birthing hospitals in the Greater Houston area; (3) Describe the alternative opt-out process for collecting ImmTrac consent at birth and discuss the associated cost savings relative to an opt-in system.^ Methods. Existing time-motion studies (n=281) conducted between October, 2006 and August, 2007 at 8 birthing hospitals in the Greater Houston area were used to assess the time and costs associated with obtaining ImmTrac consent at birth. All data analyzed are deidentified and contain no personal information. Variations in time and costs at each location were assessed and total costs per child and costs per year were estimated. The cost of an alternative opt-out system was also calculated.^ Results. The median time required by birth registrars to complete consent procedures varied from 72-285 seconds per child. The annual costs associated with obtaining consent for 388,285 newborns in ImmTrac's opt-in consent process were estimated at $702,000. The corresponding costs of the proposed opt-out system were estimated to total $194,000 per year. ^ Conclusions. Substantial variation in the time and costs associated with completion of ImmTrac consent procedures were observed. Changing to an opt-out system for participation could represent significant cost savings. ^

Termination and cost analysis: Complexity and precision issues

The research in this thesis is related to static cost and termination analysis. Cost analysis aims at estimating the amount of resources that a given program consumes during the execution, and termination analysis aims at proving that the execution of a given program will eventually terminate. These analyses are strongly related, indeed cost analysis techniques heavily rely on techniques developed for termination analysis. Precision, scalability, and applicability are essential in static analysis in general. Precision is related to the quality of the inferred results, scalability to the size of programs that can be analyzed, and applicability to the class of programs that can be handled by the analysis (independently from precision and scalability issues). This thesis addresses these aspects in the context of cost and termination analysis, from both practical and theoretical perspectives. For cost analysis, we concentrate on the problem of solving cost relations (a form of recurrence relations) into closed-form upper and lower bounds, which is the heart of most modern cost analyzers, and also where most of the precision and applicability limitations can be found. We develop tools, and their underlying theoretical foundations, for solving cost relations that overcome the limitations of existing approaches, and demonstrate superiority in both precision and applicability. A unique feature of our techniques is the ability to smoothly handle both lower and upper bounds, by reversing the corresponding notions in the underlying theory. For termination analysis, we study the hardness of the problem of deciding termination for a speci�c form of simple loops that arise in the context of cost analysis. This study gives a better understanding of the (theoretical) limits of scalability and applicability for both termination and cost analysis.

1980 and 1979 Ford F-150 light truck weight and manufacturing cost analysis. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Cost analysis methodology and protocol estimates : OECD minimum pre-market data test protocols /

"EPA-560/4-81-002."