107 resultados para cleanliness
Resumo:
In this work, the volatile chromatographic profiles of roasted Arabica coffees, previously analyzed for their sensorial attributes, were explored by principal component analysis. The volatile extraction technique used was the solid phase microextraction. The correlation optimized warping algorithm was used to align the gas chromatographic profiles. Fifty four compounds were found to be related to the sensorial attributes investigated. The volatiles pyrrole, 1-methyl-pyrrole, cyclopentanone, dihydro-2-methyl-3-furanone, furfural, 2-ethyl-5-methyl-pyrazine, 2-etenyl-n-methyl-pyrazine, 5-methyl-2-propionyl-furan compounds were important for the differentiation of coffee beverage according to the flavour, cleanliness and overall quality. Two figures of merit, sensitivity and specificity (or selectivity), were used to interpret the sensory attributes studied.
Resumo:
Objective: To verify the effects of laser energy on intracanal dentin surfaces, by analyzing the morphologic changes and removal of debris in the apical third of 30 extracted human teeth, prepared and irradiated with the Nd:YAG laser and diode laser. Background Data: Lasers have been widely used in endodontics. The morphologic changes in dentin walls caused by Nd: YAG and diode laser irradiation could improve apical seals and cleanliness. Materials and Methods: The protocol used for Nd: YAG laser irradiation was 1.5 W, 100 mJ, and 15 Hz, in pulsed mode, and for diode laser was 2.5 W in continuous mode. Each specimen was irradiated four times at a speed of 2 mm/sec with a 20-sec interval between applications. Five calibrated examiners scored the morphologic changes and debris removal on a 4-point scale. Results: In analyzing the scores, there were no statistically significant differences between the two types of laser for either parameter, according to Kruskal-Wallis testing at p = 0.05. The SEM images showed fusion and resolidification of the dentin surface, with partial removal of debris on the specimens irradiated with the Nd: YAG laser and the diode laser, compared with controls. Conclusion: Both lasers promote morphologic changes and debris removal. These alterations of the dentin surface appeared to be more evident in the Nd: YAG laser group, but the diode laser group showed more uniform changes.
Resumo:
Objective. The aim of this study was to compare Profile .04 taper series 29 instruments and hand files for gutta-percha removal. Study design. Twenty maxillary central incisors with a single straight canal were instrumented and filled. The teeth were divided into 2 groups of 10 specimens each, according to gutta-percha removal techniques: Group 1- Profile series 29 and Group 2- hand files and solvent. The amount of time for gutta-percha removal and the number of fractured instruments were evaluated. Radiographs were taken and the teeth were grooved longitudinally and split. The area of residual debris was measured using computer software. Results. The time for filling material removal was significantly shorter when Profile series 29 was used (P = .00). Regarding cleanliness, there were no statistical differences in the teeth halves evaluations (P = .05). Hand instruments cleaned the canals significantly better than Profiles, in the radiographic analysis considering the whole canal. Overall, the radiographic analysis showed a smaller percentage of residual debris than the teeth halves analysis. Conclusion. The Profile series 29 instruments proved to be faster than hand instruments in removing root filling materials; however, hand instruments yielded better root canal cleanliness. Some residual debris was not visualized by radiographs. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2009; 108: e46-e50)
Resumo:
P>Objective To evaluate the influence of apical size on cleaning of the apical third of curved canals prepared with rotary instruments. Methodology Forty-four mesiobuccal canals of maxillary molars teeth were instrumented to different apical sizes (30, 0.02; 35, 0.02; 40, 0.02; 45, 0.02) using a crown-down technique. After canal preparation, the apical thirds of the roots were submitted to histological processing and examination. The specimens were analysed at 40x magnification and the images were submitted to morphometric analysis with an integration grid to evaluate the percentage of debris and uninstrumented root canal walls. The action of the instruments on the root canal walls was assessed based on the surface regularity, abrupt change on the continuity of root canal walls, and partial or total pre-dentine removal. The results were statistically compared using one-way anova with post hoc Tukey test. Pearson`s correlation was performed to identify potential correlations between values. Results The percentage of uninstrumented root canal dentine was higher when apical enlargement was performed with instruments 30, 0.02 taper (55.64 +/- 4.62%) and 35, 0.02 taper (49.03 +/- 5.70%) than with instruments 40, 0.02 taper (38.08 +/- 10.44%) and 45, 0.02 taper (32.65 +/- 8.51%) (P < 0.05). More debris were observed when apical enlargement was performed with instruments 30, 0.02 taper (34.62 +/- 9.49%) and 35, 0.02 taper (25.33 +/- 7.37%) (P < 0.05). There was a significant correlation between the amount of remaining debris and the perimeter of uninstrumented root canal dentine (r = 0.9130, P < 0.001). Conclusion No apical enlargement size allowed the root canal walls to be prepared completely. Apical third cleanliness could be predicted by instrument diameter.
Resumo:
Objectives: The purpose of this study was to investigate the effect of the domestic use of a disclosing agent for denture hygiene. Materials and methods: Completely edentulous participants wearing maxillary dentures were randomly assigned to one of the three intervention groups: (1) Follow-up only (control; n = 12); (2) Oral and denture hygiene instructions (n = 10); (3) Instructions associated with the home use of a disclosing agent (1% neutral red; n = 10). Biofilm coverage area (%) over internal and external surfaces of the maxillary denture was assessed at baseline and after 14 and 90 days. Data were evaluated by generalised estimating equations based on score tests (alpha = 0.05). Results: The participants presented low changes for areas of biofilm coverage (14 days (%): internal: GI = 1.4 +/- 0.9; GII = 1.5 +/- 1.3; GIII = -0.4 +/- 0.9; external: GI = 1.4 +/- 1.5; GII = 1.5 +/- 1.4; GIII = -0.4 +/- 0.9; 90 days (%): internal: GI = 2.0 +/- 0.9; GII = 2.2 +/- 1.4; GIII = 0.3 +/- 1.0; external: GI = 2.1 +/- 1.4; GII = 2.2 +/- 1.5; GIII = 0.3 +/- 0.9). Changes were similar for the three groups (p = 0.293) and were not influenced by the test time (p = 0.218). Conclusion: It can be concluded that the home use of a disclosing agent for denture hygiene does not improve the removal of the biofilm, particularly for patients with adequate oral hygiene habits.
Resumo:
The relationship between the hygienic habits of children who had typhoid fever (TF) who had recently begun attending school and their family group, is assessed. It is supposed that children, independently of their SES, acquired TF because of inadequate habits which facilitated the oral-fecal cycle. The sample was formed of 40 child-mother dyads: 20 of low SES (group A) and 20 of high SES (group B), the child of each of which had had TF. Results showed that the hygienic habits of children with respect to the oral-fecal cycle, their perception of school toilet cleanliness as well as the mothers' explanation of their children's hygienic habits is very similar in the two groups. The importance of these results is that the SES is seem to be irrelevant in the case of TF but that the hygienic habits of the children are of importance. Public health policy should be modified to include the teaching of proper hygienic habits (oral-fecal cycle).
Resumo:
Dissertação de Mestrado, Ciências Económicas e Empresariais, 11 de Dezembro de 2015, Universidade dos Açores.
Resumo:
OBJECTIVE To examine whether demographic, socioeconomic conditions, oral health subjectivity and characterization of dental care are associated with users’ dissatisfaction with such are.METHODS Cross-sectional study of 781 people who required dental care in Montes Claros, MG, Southeastern Brazil, in 2012, a city with of medium-sized population situated in the North of Minas Gerais. Household interviews were conducted to assess the users’ dissatisfaction with dental care (dependent variable), demographic, socioeconomic conditions, oral health subjectivity and characterization of dental care (independent variables). Sample calculation was used for the finite population, with estimates made for proportions of dissatisfaction in 50.0% of the population, a 5.0% error margin, a non-response rate of 5.0% and a 2.0% design effect. Logistic regression was used, and the odds ratio was calculated with a 5% significance level and 95% confidence intervals.RESULTS Of the interviewed individuals, 9.0% (7.9%, with correction for design effect) were dissatisfied with the care provided. These were associated with lower educational level; negative self-assessment of oral health; perception that the care provider was unable to give dental care; negative evaluation of the way the patient was treated, the cleanliness of the rooms, based on the examination rooms and the toilets, and the size of the waiting and examination rooms.CONCLUSIONS The rate of dissatisfaction with dental care was low. This dissatisfaction was associated with socioeconomic conditions, subjectivity of oral health, skill of the health professionals relating to the professional-patient relationship and facility infrastructure. Educational interventions are suggested that aim at improving the quality of care among professionals by responsible agencies as is improving the infrastructure of the care units.
Resumo:
Devido à atual crise socioeconómica e consequente recessão dos mercados, as empresas precisam cada vez mais de melhorar os seus modelos de gestão e apostar na melhoria dos seus processos de forma a conseguirem produzir produtos de qualidade utilizando o menor custo de produção possível. O uso das ferramentas Lean Production e das ferramentas de Gestão da Qualidade permite às empresas reduzir, ou até mesmo eliminar alguns desperdícios. Desta forma é possível reduzir custos de produção e aumentar a produtividade. Neste contexto surge a presente dissertação, realizada na empresa IKEA Industry Portugal no âmbito do Mestrado em Engenharia Mecânica – Gestão Industrial, que tem como principal objetivo melhorar o processo produtivo de uma linha de produção da área EdgeBand & Drill, linha Biesse. No início deste projeto esta linha apresentava uma eficiência de 45,83%. Depois da descrição da empresa e do seu funcionamento, realizou-se um estudo sobre o estado atual do sistema produtivo da área de produção em estudo, Edgeband & Drill, mais concretamente da linha Biesse. Desse estudo resultou a identificação de alguns problemas da linha, nomeadamente a baixa eficiência, elevados tempos de paragem da linha, elevada quantidade de peças com defeitos, elevados custos associados a peças sucata, falta de polivalência dos operadores, desperdícios de matérias primas e falta de organização e limpeza da área. Depois de identificados os problemas foram apresentadas algumas propostas de melhoria para o processo produtivo da linha Biesse. Nesta fase foram utilizadas algumas ferramentas Lean e de Gestão da Qualidade. No fim do projeto obteve-se uma redução de 1,26% dos tempos de paragem, uma redução de 1317 peças com defeito e uma poupança de 1147,44€ em peças sucata. Estes valores contribuíram para uma melhoria da eficiência global em cerca de 1,06% para a área EdgeBand & Drill e uma melhoria de 3,11% para a linha em estudo, linha Biesse.
Resumo:
Dissertação para obtenção do Grau de Mestre em Engenharia Civil – Perfil de Estruturas
Resumo:
Aquest projecte presenta una solució integral e integrada per a la gestió d’equipaments públics municipals. És integral ja que contempla tots els aspectes de la gestió, mitjançant diferents canals en funció del perfil d’usuari que l’utilitza ; és integrada ja que proporciona una solució integrada amb l’ERP corporatiu existent actualment a l’Ajuntament per al qual s’ha desenvolupat. El projecte presenta els següents canals de gestió: Aplicació Windows desenvolupada en .NET, Extranet de gestió amb gestió de continguts, Aplicació web per dispositius mòbils i Web informativa de recollida selectiva i neteja viària. El projecte també disposa de connexió al gestor documental Documentum de EMC2.
Resumo:
Although the risk of catching an infection as a result of a fish spa pedicure is likely to be very low, it cannot be completely excluded. However, there are certain things you can do to further reduce your risk of catching or spreading an infection when having one of these treatments.Choosing a salonUse your personal judgment: as with all beauty salons, if it looks unsanitary, do not go there for your treatment. If you are very concerned about the cleanliness of a salon you visit, you can report this to your local Environmental Health department, who will be able to perform an inspection of the premises.When having a treatment, a trained member of staff should perform an inspection of your feet both beforehand, to check for any broken skin / infections, and afterwards, to check for signs of bleeding. They should also ask you to wash your feet with soap and water before putting them in the tank, to make sure that any products you have used that could be harmful to the fish are washed away, and to reduce the risk of spreading any infection.Ask your therapist what other procedures the salon has in place to minimise the risk of infection. The Health Protection Agency, England has produced a set of guidelines for salons which, if followed, will ensure any potential risk of infection is kept to an absolute minimum.Before having the treatment The HPA has identified a number of health conditions or prior treatments which may mean that you should not have a fish pedicure. These are:Leg waxing or shaving in last 24 hoursAny open cuts/wounds/abrasions/broken skin on the feet or lower legsInfection on the feet (including athlete's foot, verruca)Psoriasis, eczema or dermatitis affecting the feet or lower legsDiabetes (increased risk of infection)Infection with a blood borne virus such as Hepatitis B or Hepatitis C or HIVAny immune deficiency due to illness or medicationBleeding disorders or on anticoagulant medication (e.g. heparin or warfarinMore information and advice on fish spa pedicures and the full set of guidance can be found on the Health Protection website www.hpa.org.uk
Resumo:
BACKGROUND: Dentists are in a unique position to advise smokers to quit by providing effective counseling on the various aspects of tobacco-induced diseases. The present study assessed the feasibility and acceptability of integrating dentists in a medical smoking cessation intervention. METHODS: Smokers willing to quit underwent an 8-week smoking cessation intervention combining individual-based counseling and nicotine replacement therapy and/or bupropion, provided by a general internist. In addition, a dentist performed a dental exam, followed by an oral hygiene treatment and gave information about chronic effects of smoking on oral health. Outcomes were acceptability, global satisfaction of the dentist's intervention, and smoking abstinence at 6-month. RESULTS: 39 adult smokers were included, and 27 (69%) completed the study. Global acceptability of the dental intervention was very high (94% yes, 6% mostly yes). Annoyances at the dental exam were described as acceptable by participants (61% yes, 23% mostly yes, 6%, mostly no, 10% no). Participants provided very positive qualitative comments about the dentist counseling, the oral exam, and the resulting motivational effect, emphasizing the feeling of oral cleanliness and health that encouraged smoking abstinence. At the end of the intervention (week 8), 17 (44%) participants reported smoking abstinence. After 6 months, 6 (15%, 95% CI 3.5 to 27.2) reported a confirmed continuous smoking abstinence. DISCUSSION: We explored a new multi-disciplinary approach to smoking cessation, which included medical and dental interventions. Despite the small sample size and non-controlled study design, the observed rate was similar to that found in standard medical care. In terms of acceptability and feasibility, our results support further investigations in this field. TRIAL REGISTRATION NUMBER: ISRCTN67470159.
Resumo:
PURPOSE: To review the literature on young people's perspectives on health care with a view to defining domains and indicators of youth-friendly care. METHODS: Three bibliographic databases were searched to identify studies that purportedly measured young people's perspectives on health care. Each study was assessed to identify the constructs, domains, and indicators of adolescent-friendly health care. RESULTS: Twenty-two studies were identified: 15 used quantitative methods, six used qualitative methods and one used mixed methodology. Eight domains stood out as central to young people's positive experience of care. These were: accessibility of health care; staff attitude; communication; medical competency; guideline-driven care; age appropriate environments; youth involvement in health care; and health outcomes. Staff attitudes, which included notions of respect and friendliness, appeared universally applicable, whereas other domains, such as an appropriate environment including cleanliness, were more specific to particular contexts. CONCLUSION: These eight domains provide a practical framework for assessing how well services are engaging young people. Measures of youth-friendly health care should address universally applicable indicators of youth-friendly care and may benefit from additional questions that are specific to the local health setting.
Resumo:
In the framework of social representation, this research explores how the concept of cleanness does not refer solely to individual hygienic praxes and thoughts, but it is also linked to social and cultural aspects. In this way, the definitions of what is dirty and what is clean, what is pure and what is impure, are linked to social discrimination attitudes, based for example on the fear for contamination. Our general hypothesis is that the representations of dirt/cleanness and purity/impurity define ideas and praxes linked to personal hygiene, but refer also to the way people interact with the world and the others. Hence, we hypothesize that the representations of dirt/cleanness and purity/impurity are linked to values and political and religious orientations. A questionnaire with closed-answer questions and a free association task were distributed to 450 subjects. Results show how, in effects, the concepts of dirt/cleanness, purity/ impurity skip from their daily praxis connotations and assume a symbolic function for discriminating between individuals and social groups.