Oxidative Leaching of metals from electronic waste with solutions based on quaternary ammonium salts

The treatment of electric and electronic waste (WEEE) is a problem which receives ever more attention. An inadequate treatment results in harmful products ending up in the environment. This project intends to investigate the possibilities of an alternative route for recycling of metals from printed circuit boards (PCBs) obtained from rejected computers. The process is based on aqueous solutions composed of an etchant, either 0.2 M CuCl2.2H2O or 0.2 M FeCl3.6H2O, and a quaternary ammonium salt (quat) such as choline chloride or chlormequat. These solutions are reminiscent of deep eutectic solvents (DES) based on quats. DES are quite similar to ionic liquids (ILs) and are used as well as alternative solvents with a great diversity of physical properties, making them attractive for replacement of hazardous, volatile solvents (e.g. VOCs). A remarkable difference between genuine DES and ILs with the solutions used in this project is the addition of rather large quantities of water. It is shown the presence of water has a lot of advantages on the leaching of metals, while the properties typical for DES still remain. The oxidizing capacities of Cu(II) stem from the existence of a stable Cu(I) component in quat based DES and thus the leaching stems from the activity of the Cu(II)/Cu(I) redox couple. The advantage of Fe(III) in combination with DES is the fact that the Fe(III)/Fe(II) redox couple becomes reversible, which is not true in pure water. This opens perspectives for regeneration of the etching solution. In this project the leaching of copper was studied as a function of gradual increasing water content from 0 - 100w% with the same concentration of copper chloride or iron(III) chloride at room temperature and 80ºC. The solutions were also tested on real PCBs. At room temperature a maximum leaching effect for copper was obtained with 30w% choline chloride with 0.2 M CuCl2.2H2O. The leaching effect is still stronger at 80°C, b ut of course these solutions are more energy consuming. For aluminium, tin, zinc and lead, the leaching was faster at 80ºC. Iron and nickel dissolved easily at room temperature. The solutions were not able to dissolve gold, silver, rhodium and platinum.

Solid contact PVC membrane electrodes based on neutral or charged carriers for the selective reading of anionic sulfamethoxazole and their application to the analysis of aquaculture water

Sulfamethoxazole (SMX) is among the antibiotics employed in aquaculture for prophylactic and therapeutic reasons. Environmental and food spread may be prevented by controlling its levels in several stages of fish farming. The present work proposes for this purpose new SMX selective electrodes for the potentiometric determination of this sulphonamide in water. The selective membranes were made of polyvinyl chloride (PVC) with tetraphenylporphyrin manganese (III) chloride or cyclodextrin-based acting as ionophores. 2-nitrophenyl octyl ether was employed as plasticizer and tetraoctylammonium, dimethyldioctadecylammonium bromide or potassium tetrakis (4-chlorophenyl) borate was used as anionic or cationic additive. The best analytical performance was reported for ISEs of tetraphenylporphyrin manganese (III) chloride with 50% mol of potassium tetrakis (4-chlorophenyl) borate compared to ionophore. Nersntian behaviour was observed from 4.0 × 10−5 to 1.0 × 10−2 mol/L (10.0 to 2500 µg/mL), and the limit of detection was 1.2 × 10−5 mol/L (3.0 µg/mL). In general, the electrodes displayed steady potentials in the pH range of 6 to 9. Emf equilibrium was reached before 15 s in all concentration levels. The electrodes revealed good discriminating ability in environmental samples. The analytical application to contaminated waters showed recoveries from 96 to 106%.

Sulfadiazine-selective determination in aquaculture environment: Selective potentiometric transduction by neutral or charged ionophores

Solid-contact sensors for the selective screening of sulfadiazine (SDZ) in aquaculture waters are reported. Sensor surfaces were made from PVC membranes doped with tetraphenylporphyrin-manganese(III) chloride, α-cyclodextrin, β-cyclodextrin, or γ-cyclodextrin ionophores that were dispersed in plasticizer. Some membranes also presented a positive or a negatively charged additive. Phorphyrin-based sensors relied on a charged carrier mechanism. They exhibited a near-Nernstian response with slopes of 52 mV decade−1 and detection limits of 3.91 × 10−5 mol L−1. The addition of cationic lipophilic compounds to the membrane originated Nernstian behaviours, with slopes ranging 59.7–62.0 mV decade−1 and wider linear ranges. Cyclodextrin-based sensors acted as neutral carriers. In general, sensors with positively charged additives showed an improved potentiometric performance when compared to those without additive. Some SDZ selective membranes displayed higher slopes and extended linear concentration ranges with an increasing amount of additive (always <100% ionophore). The sensors were independent from the pH of test solutions within 2–7. The sensors displayed fast response, always <15 s. In general, a good discriminating ability was found in real sample environment. The sensors were successfully applied to the fast screening of SDZ in real waters samples from aquaculture fish farms. The method offered the advantages of simplicity, accuracy, and automation feasibility. The sensing membrane may contribute to the development of small devices allowing in locus measurements of sulfadiazine or parent-drugs.

Spéciation of chromium in a chromium enriched yeast.

The sample under investigation in this project is an experimental chromium enriched yeast used as a possible additive in animal foodstuff, which was produced by growing yeast in the presence of chromium (III) chloride. Chromium on its own in not biologically active but chromium in the form of chromium enriched yeast is biologically active. The objective of this project was to show the complete absence of chromium(VI) from the sample. A literature survey describing previous work carried out on the speciation of Cr(VI) has been carried out. The principal methods of detection of Cr(VI) used in this project are Polarography, G.F.A.A. Spectroscopy, U.V. Spectroscopy and H.P.L.C. For each of the above methods a calibration curve was obtained and each method was applied to the yeast extract. The H.P.L.C. and U.V. spectroscopic method are specific for Cr(VI) but polarography and G.F.A.A. spectroscopy measure total chromium. Tris-NaOH buffer has been investigated for the extraction of chromium(VT). Problems associated with air oxidation of Cr(III) in alkaline solution have identified and procedures described for the suppression of air oxidation. Procedures are described for the application of the extraction procedure to the yeast extract and for the determination of Cr(VI) in the extract. Procedures are also described for the preconcentration of Cr(VI) on a HPLC column and for the application to the yeast extract. The rate of reduction of Cr(VI) by ascorbic acid is investigated and found to be first order with respect to ascorbic acid concentration. The reduction capacity of the yeast is also investigated and it was found that in acid solution the yeast will reduce Cr(VI) but in neutral or basic solution the reduction capacity is diminished. Conclusions regarding the objectives of the project are drawn and suggestions for further work are given.

Role of peroxynitrite in the cardiovascular dysfunction of septic shock.

The intense systemic inflammatory response characterizing septic shock is associated with an increased generation of free radicals by multiple cell types in cardiovascular and non cardiovascular tissues. The oxygen-centered radical superoxide anion (O2 .-) rapidly reacts with the nitrogen-centered radical nitric oxide (NO.) to form the potent oxidant species peroxynitrite. Peroxynitrite oxidizes multiple targets molecules, either directly or via the secondary generation of highly reactive radicals, resulting in significant alterations in lipids, proteins and nucleic acids, with significant cytotoxic consequences. The formation of peroxynitrite is a key pathophysiological mechanism contributing to the cardiovascular collapse of septic shock, promoting vascular contractile failure, endothelial and myocardial dysfunction, and is also implicated in the occurrence of multiple organ dysfunction in this setting. The recent development of various porphyrin-based pharmacological compounds accelerating the degradation of peroxynitrite has allowed to specifically address these pathophysiological roles of peroxynitrite in experimental septic shock. Such agents, including 5,10,15,20-tetrakis(4- sulfonatophenyl)porphyrinato iron III chloride (FeTTPs), manganese tetrakis(4-N-methylpyridyl)porphyrin (MnTMPyP), Fe(III) tetrakis-2-(N-triethylene glycol monomethyl ether)pyridyl porphyrin) (FP-15) and WW-85, have been shown to improve the cardiovascular and multiple organ failure in small and large animal models of septic shock. Therefore, these findings support the development of peroxynitrite decomposition catalysts as potentially useful novel therapeutic agents to restore cardiovascular function in sepsis.

Oxochloroalkoxide of the Cerium (IV) and Titanium (IV) as oxides precursor

The Cerium (IV) and Titanium (IV) oxides mixture (CeO2-3TiO2) was prepared by thermal treatment of the oxochloroisopropoxide of Cerium (IV) and Titanium (IV). The chemical route utilizing the Cerium (III) chloride alcoholic complex and Titanium (IV) isopropoxide is presented. The compound Ce5Ti15Cl16O30 (iOPr)4(OH-Et)15 was characterized by elemental analysis, FTIR and TG/DTG. The X-ray diffraction patterns of the oxides resulting from the thermal decomposition of the precursor at 1000 °C for 36 h indicated the formation of cubic cerianite (a = 5.417Å) and tetragonal rutile (a = 4.592Å) and (c = 2.962 Å), with apparent crystallite sizes around 38 and 55nm, respectively.

Estudos Cinéticos da aquação do trans-[Co(en)2Cl2]Cl

The trans-dichlorobis(ethylenediamine)cobalt(III) chloride was synthesized in an undergraduate laboratory and its aquation reaction was carried out at different temperatures. This reaction follows pseudo-first-order kinetics and the rate constants, determined at 25, 35, 45, 55 and 70 º C, are 1.44 x 10-3; 5.14 x 10-3; 1.48 x 10-2; 4.21 x 10-2 and 2.21 x 10-1 s-1, respectively. The activation energy is 93.99 ± 2.88 kJ mol-1.

Synthèse d’un inhibiteur de la rénine, l’aliskiren et développement de méthodes catalytiques d’alkylation asymétrique

Une nouvelle approche pour la synthèse de l’aliskiren, un puissant inhibiteur de la rénine pour le traitement de l’hypertension chez l’homme, a été développée. De cette approche, des étapes clés tels qu’une allylation avec un des catalyseurs de MacMillan, une cyclisation par métathèse (RCM) pour la préparation d’une lactone à neuf membres et une séquence de réactions d’aziridination diastéréosélective/réarrangement de cycle par une catalyse acide donnant un produit aminohydroxylé ont permis de compléter la synthèse de l’aliskiren en 11 étapes. Durant l’élaboration de la séquence de réactions pour la préparation de l’aliksiren, il a été noté que la lactone à neuf membres avait une facilité à se réarranger via des intermédiaires quinonoïdaux et les produits issus de cette tendance ont été analysés. De plus, une étude sur la réaction de RCM, donnant la lactone à neuf membres, a montré une dépendance envers la nature diastéréomérique du substrat de départ. Une méthodologie d’alpha-allylation asymétrique de cétones catalysée au palladium, tirant avantage d’un ligand chiral PHOX, a été explorée et utilisée en vue de la synthèse de l’aliskiren. De cette méthode, une étude pour la synthèse de produits alpha-allylcétones acycliques a été démontrée et un effet d’additif sur la sélectivité et la vitesse de réaction a été découvert. De plus, la production d’un intermédiaire avancé d’un produit d’intérêts a été accomplie et la nature de la contribution de l’additif a été investiguée. Les produits obtenus depuis la méthodologie d’allylation catalysée au palladium et la formation d’intermédiaire cationique des certains dérivés de la synthèse de l’aliskiren ont inspirés une nouvelle approche faisant appel à des techniques d’alkylation en catalyse acide pour la formation de produits diaryliques. Il a été trouvé que le catalyseur de chlorure d’or(III) et de triflate de bismuth(III) étaient particulièrement efficaces, démontrant une différence de cinétique pour la réactivité d’un mélange diastéréoisomériques d’alcools alpha-substitués de départ.

Síntesi, caracterització química i estudi de l'activitat biològica de nous complexos de Pt(II) amb lligands de tipus diaminocarboxílic i els respectius ésters i derivats peptídics

El cisplatí, PtCl2(NH3)2, ha estat una de les drogues més utilitzades en la quimioteràpia del càncer des del descobriment de la seva activitat. Però degut a la seva alta toxicitat i greus efectes secundaris, s'han sintetitzat nous compostos amb la finalitat de reduir aquests inconvenients. En aquest sentit, el treball desenvolupat en aquesta tesi doctoral ha estat la síntesi i caracterització de tretze complexos de Pt(II) amb la finalitat d'estudiar llur activitat antitumoral. Aquests complexos presenten unes característiques estructurals comunes: geometria cis, dos lligands làbils de tipus clorur i un lligand diaminoquelatant derivat dels àcids d,l-2,3-diaminopropiònic (Hdap) i d,l-2,4-diaminobutíric (Hdab). S'han dissenyat unes estratègies sintètiques a partir de les quals els lligands han estat funcionalitzats amb diferents grups de tipus éster, aminoàcid i peptídic: Etdap·2HCl, Etdab·2HCl, [(dap-Metala)·2CF3COOH], [(dab-Metala)·2CF3COOH], [(dap-phe)·2CF3COOH], [(dab-phe)·2CF3COOH], [(dap-Mettrp)·2CF3COOH], [(dab-Mettrp)·2CF3COOH], [(dap-ASTTTNYT-NH2)·2CF3COOH], essent Metala= éster metílic de L-alanina, phe= L-fenilalanina, Mettrp= éster metílic del L-triptofà. Aquests lligands diaminoquelatants s'han utilitzat per sintetitzar els corresponents complexos de Pt(II): PtCl2(Hdap), PtCl2(Hdab), PtCl2(Etdap), PtCl2(Etdab), PtCl2(dap-Metala), PtCl2(dab-Metala), PtCl2(dap-ala), PtCl2(dab-ala), PtCl2(dap-phe), PtCl2(dab-phe), PtCl2(dap-Mettrp), PtCl2(dab-Mettrp), PtCl2(dap-ASTTTNYT-NH2). A través de diferents tècniques i assaigs biològics (dicroisme circular, electroforesi en gel d'agarosa, microscopia de forces atòmiques, citometria de flux, assaigs de proliferació cel·lular) s'ha pogut demostrar l'activitat antitumoral d'aquests compostos. A través de la tècnica de dicroisme circular (DC) s'ha pogut demostrar que els lligands lliures no interaccionen covalentment amb el DNA de Calf Thymus i no modifiquen l'estructura secundària de la doble hèlix. En canvi, els respectius complexos han demostrat tenir capacitat per interaccionar amb el DNA i modificar la seva estructura secundària. Els complexos PtCl2(Hdap), PtCl2(Hdab) i PtCl2(dab-phe) mostren un comportament similar al cisplatí, generant adductes cis-bifuncionals que distorcionen la doble hèlix de forma no desnaturalitzant amb obertura de la doble cadena. Els complexos PtCl2(Etdap), PtCl2(Etdab), PtCl2(dap-ala), PtCl2(dab-ala), PtCl2(dap-Metala), PtCl2(dab-Metala), PtCl2(dap-phe), PtCl2(dap-ASTTTNYT-NH2) quan interaccionen amb el DNA generen un canvi en la conformació del DNA de la forma B a la forma C, produint-se un augment de la curvatura de l'hèlix per rotació de les bases nitrogenades. En aquests estudis s'ha comprovat que l'estructura del complex influeix en l'efecte generat sobre l'estructura secundària de l'àcid nucleic. En primer lloc, existeix una diferència en el comportament en funció del tamany del lligand diaminoquelatant, de manera que els complexos amb el lligand (dab) provoquen un efecte més remarcable. També s'observa aquest canvi de comportament al passar dels complexos que tenen el grup funcional esterificat als que el tenen protonat. D'aquesta manera, s'observa un major efecte sobre l'estructura secundària del DNA en aquells complexos que tenen el lligand diaminoquelatant de tres metilens (dab) i amb el grup carboxilat terminal protonat. Per tal de modelitzar la interacció d'aquests complexos amb el DNA, s'ha estudiat la interacció d'aquests compostos de Pt(II) amb 5'-GMP a través de RMN-1H, observant la variació dels senyals corresponents al H8 de 5'-GMP. Així s'ha pogut demostrar que aquests compostos interaccionen amb la 5'-GMP a través d'un enllaç covalent Pt-N7, de la mateixa manera a com interacciona el cisplatí. A través d'electroforesi en gel d'agarosa i microscopia de forces atòmiques (AFM) s'ha pogut determinar l'efecte que generen els lligands lliures i els respectius complexos de Pt(II) sobre l'estructura terciària del plasmidi pBR322. Els lligands provoquen un augment de l'agregació de les molècules de DNA i un lleuger augment de la compactació de l'estructura terciària. Aquests resultats s'atribueixen a la capacitat d'aquests compostos a interaccionar per pont d'hidrogen amb el DNA. Els corresponents complexos de Pt(II) provoquen un augment de l'agregació i una important compactació, degut per una banda a la capacitat de l'àtom de Pt a interaccionar covalentment amb el DNA, i per altra banda, a la capacitat del lligand a interaccionar per pont d'hidrogen amb l'àcid nucleic. Finalment s'ha estudiat l'activitat citotòxica d'aquests complexos de Pt(II) en diferents línies cel·lulars: A431 (línia de carcinoma epidermoide), HeLa (línia de carcinoma de coll d'úter) i HL-60 (línia promielocítica de leucèmia). Els complexos moderadament solubles en aigua, PtCl2(Hdap), PtCl2(Hdab), PtCl2(dap-ala), PtCl2(dab-ala), PtCl2(dap-phe) i PtCl2(dab-phe), han demostrat ser actius. L'activitat depèn de la concentració de complex, del temps d'incubació i de la línia cel·lular. Per temps d'incubació alts i concentracions de complex elevades s'observa la màxima activitat. Els complexos de l'alanina, PtCl2(dap-ala) i PtCl2(dab-ala), són els que mostren més activitat, mentre que els compostos de la fenilalanina són els menys actius, degut probablement a la voluminositat del lligand, la qual pot impedir o dificultar el transport del compost a través de la membrana cel·lular. L'activitat citotòxica dels complexos insolubles en aigua, PtCl2(Etdap) i PtCl2(Etdab), queda bloquejada per l'elevada concentració de DMSO (12%) necessària per solubilitzar els compostos. Aquests resultats permeten deduir que la presència d'un 12% de DMSO anul·la l'activitat d'aquests complexos, ja que el DMSO pot coordinar-se amb el Pt ocupant les posicions làbils del complex i evitant que es pugui coordinar amb el DNA. Els assaigs de proliferació cel·lular del complex PtCl2(dap-ASTTTNYT-NH2) i del pèptid lliure ASTTTNYT-NH2 han demostrat que ambdós compostos són actius. Tot i això, l'activitat del complex és superior a la del pèptid lliure, ja que el Pt pot interaccionar covalentment amb el DNA i augmentar l'efecte citotòxic. Per tant, el complex presenta un lligand portador biològicament actiu que pot transportar el metall a través de la membrana cel·lular i facilitar així la seva interacció amb el DNA. A través de la tècnica de citometria de flux s'ha comprovat que en tots els casos la mort cel·lular produïda pels complexos ha estat per apoptosi. Per últim, s'ha sintetitzat i caracteritzat un complex trinuclear de Pt(II), {[Pt(Me2Bpy)2][PtCl2(Me2Bpy)]2}, essent Me2Bpy= 4,4'-dimetil-2,2'-dipiridil. La resolució de la seva estructura per difracció de Raig-X ha permès determinar l'existència d'una interacció intramolecular Pt-Pt de 3.474 Å.

The effect of copper(II), iron(II) sulphate and vitamin C combinations on the weak antimicrobial activity of (+)-catechin against Staphylococcus aureus and other microbes

Few attempts have been made to improve the activity of plant compounds with low antimicrobial efficacy. (+)-Catechin, a weak antimicrobial tea flavanol, was combined with putative adjuncts and tested against different species of bacteria. Copper(II) sulphate enhanced (+)-catechin activity against Pseudomonas aeruginosa but not Staphylococcus aureus, Proteus mirabilis or Escherichia coli. Attempts to raise the activity of (+)-catechin against two unresponsive species, S. aureus and E. coli, with iron(II) sulphate, iron(III) chloride, and vitamin C, showed that iron(II) enhanced (+)-catechin against S. aureus, but not E. coli; neither iron(III) nor combined iron(II) and copper(II), enhanced (+)-catechin activity against either species. Vitamin C enhanced copper(II) containing combinations against both species in the absence of iron(II). Catalase or EDTA added to active samples removed viability effects suggesting that active mixtures had produced H2O2via the action of added metal(II) ions. H2O2 generation by (+)-catechin plus copper(II) mixtures and copper(II) alone could account for the principal effect of bacterial growth inhibition following 30 minute exposures as well as the antimicrobial effect of (+)-catechin–iron(II) against S. aureus. These novel findings about a weak antimicrobial flavanol contrast with previous knowledge of more active flavanols with transition metal combinations. Weak antimicrobial compounds like (+)-catechin within enhancement mixtures may therefore be used as efficacious agents. (+)-Catechin may provide a means of lowering copper(II) or iron(II) contents in certain crop protection and other products.

Aerobic oxidation of monoterpenic alcohols catalyzed by ruthenium hydroxide supported on silica-coated magnetic nanoparticles

Ruthenium hydroxide supported on silica-coated magnetic nanoparticles was shown to be an efficient heterogeneous catalyst for the liquid-phase oxidation of a wide range of alcohols using molecular oxygen as a sole oxidant in the absence of co-catalysts or additives. The material was prepared through the loading of the amino modified support with ruthenium(III) ions from an aqueous solution of ruthenium(III) chloride followed by treatment with sodium hydroxide to form ruthenium hydroxide species. Characterizations suggest that ruthenium hydroxide is highly dispersed on the support surface, with no ruthenium containing crystalline phases being detected. Various carbonylic monoterpenoids important for fragrance and pharmaceutical industries can be obtained in good to excellent yields starting from biomass-based monoterpenic alcohols, such as isobomeol, perillyl alcohol, carveol, and citronellol. The catalyst undergoes no metal leaching and can be easily recovered by the application of an external magnet and re-used. (C) 2011 Elsevier Inc. All rights reserved.

Microwave synthesis of YAG : Eu by sol-gel methodology

Yttrium-aluminum oxides are interesting compounds and they have been extensively used as host for lasers and phosphors, due to their stable physical and chemical properties. The fabrication of yttrium-aluminum garnet (YAG) has been investigated thoroughly. Single-crystal YAG is expensive and to produce it a new way has been investigated. This process consists of modifying the methodology of reagents mixture and the process of heating them. The microwave irradiation is used to heat-treat the oxide mixture. The traditional synthesis of YAG powders occurs through the reaction of aluminum and yttrium powders at high temperatures. With this work we investigated the preparation of YAG by non-hydrolytic sol-gel route as an alternative methodology to obtain yttrium-aluminum matrix from inorganic precursors (yttrium and aluminum chloride). The preparation of the gel was carried out in an oven-dried glassware. The AlCl3, YCl3 and ethanol were reacted in reflux under argon atmosphere. Europium III chloride was added as a structural probe. The powder was dried and heat-treated in modified microwaves. The samples were pre-treated at 50 and 800 C during I h and then heated in microwaves for 30 s, 2 and 4 min. The formation process and structure of the powders were studied by means of X-ray diffraction (XRD), photoluminescence (PL) and transmission electronic microscopy (TEM). XRD presents only picks corresponding to the YAG phase and confirmed by TEM. PL date showed that the YAG phase was formed in 2 min with the samples pre-treated at 50 C. For the samples pretreated at 800 degrees C, the YAG phase appears in 30s. The excitation spectra present a maximum of 394 nm corresponding to the L-5(6) level and emission spectra of Eu III ion present bands characteristic transitions arising from the D-5(0) -> F-7(J) (J= 1, 2, 3, 4) monifolds excited at their maximum. The magnetic dipole D-5(0) -> F-7(1) transition presents more intensity than the electric dipole D-5(0) -> F-7(2) transition. This methodology showed efficiency in obtaining YAG phase. (c) 2006 Elsevier B.V. All rights reserved.

Desenvolvimento de métodos analíticos limpos para determinações forenses: chumbo em resíduos de disparo e furosemida em doping

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sensores eletroquímicos à base de nanomateriais carbonáceos e catalisadores biomiméticos para determinação de tetraciclina em diferentes tipos de amostras

Pós-graduação em Química - IQ

New discotic liquid crystals based on large polycyclic aromatic hydrocarbons as materials for molecular electronics

A series of new columnar discotic liquid crystalline materials based on the superphenalene (C96) core has been synthesized by oxidative cyclodehydrogenation with iron(III) chloride of suitable three-dimensional oligophenylene precursors. These compounds were investigated by means of differential scanning calorimetry (DSC), polarized optical microscopy (POM) and wide angle X-ray scattering (WAXS), and showed highly ordered supramolecular arrays and mesophase behavior over a broad temperature range. Good solubility, through the introduction of long alkyl chains, and the fact that these new superphenalene derivatives were found to be liquid crystalline at room temperature enabled the formation of highly ordered films (using the zone-casting technique), a requirement for application in organic electronic devices. The one-dimensional, intracolumnar charge carrier mobilities of superphenalene derivatives were determined using the pulse-radiolysis time-resolved microwave conductivity technique (PR-TRMC). Electrical properties of different C96-C12 architectures on mica surfaces were examined by using Electrostatic Force Microscopy (EFM) and Kelvin Probe Force Microscopy (KPFM). Hexa-peri-hexabenzocoronene (C42) derivatives substituted at the periphery with six branched alkyl ether chains were also synthesized. It was found that the introduction of ether groups within the side chains enhances the affinity of the discotic molecules towards polar surfaces, resulting in homeotropic self-assembly (as shown by POM and 2D-WAXS) when the compounds are processed from the isotropic state between two surfaces. A new, insoluble, superphenalene building block bearing six reactive sites was prepared, and was further used for the preparation of dendronized superphenalenes with bulky dendritic substituents around the core. UV/Vis and fluorescence experiments suggest reduced π-π stacking of the superphenalene cores as a result of steric hindrance between the peripheral dendritic units. A new family of graphitic molecules with partial ”zig-zag” periphery has been established. The incorporation of ”zig-zag” edges was shown to have a strong influence on the electronic properties of the new molecules (as studied by solution and solid-state UV/Vis, and fluorescence spectroscopy), leading to a significant bathochromic shift with respect to the parent PAHs (C42 and C96). The reactivity of the additional double bonds was examined. The attachment of long alkyl chains to a ”zig-zag” superphenalene core afforded a new, processable, liquid crystalline material.