Acqua: solvente elettivo in Organocatalisi e Biocatalisi

Water is a safe, harmless, and environmentally benign solvent. From an eco-sustainable chemistry perspective, the use of water instead of organic solvent is preferred to decrease environmental contamination. Moreover, water has unique physical and chemical properties, such as high dielectric constant and high cohesive energy density compared to most organic solvents. The different interactions between water and substrates, make water an interesting candidate as a solvent or co-solvent from an industrial and laboratory perspective. In this regard, organic reactions in aqueous media are of current interest. In addition, from practical and synthetic standpoints, a great advantage of using water is immediately evident, since it does not require any preliminary drying process. This thesis was found on this aspect of chemical research, with particular attention to the mechanisms which control organo and bio-catalysis outcome. The first part of the study was focused on the aldol reaction. In particular, for the first time it has been analyzed for the first time the stereoselectivity of the condensation reaction between 3-pyridincarbaldehyde and the cyclohexanone, catalyzed by morpholine and 4-tertbutyldimethylsiloxyproline, using water as sole solvent. This interest has resulted in countless works appeared in the literature concerning the use of proline derivatives as effective catalysts in organic aqueous environment. These studies showed good enantio and diastereoselectivities but they did not present an in depth study of the reaction mechanism. The analysis of the products diastereomeric ratios through the Eyring equation allowed to compare the activation parameters (ΔΔH≠ and ΔΔS≠) of the diastereomeric reaction paths, and to compare the different type of catalysis. While morpholine showed constant diasteromeric ratio at all temperatures, the O(TBS)-L-proline, showed a non-linear Eyring diagram, with two linear trends and the presence of an inversion temperature (Tinv) at 53 ° C, which denotes the presence of solvation effects by water. A pH-dependent study allowed to identify two different reaction mechanisms, and in the case of O(TBS)-L-proline, to ensure the formation of an enaminic species, as a keyelement in the stereoselective process. Moreover, it has been studied the possibility of using the 6- aminopenicillanic acid (6-APA) as amino acid-type catalyst for aldol condensation between cyclohexanone and aromatic aldehydes. A detailed analysis of the catalyst regarding its behavior in different organic solvents and pH, allowed to prove its potential as a candidate for green catalysis. Best results were obtained in neat conditions, where 6-APA proved to be an effective catalyst in terms of yields. The catalyst performance in terms of enantio- and diastereo-selectivity, was impaired by the competition between two different catalytic mechanisms: one via imine-enamine mechanism and one via a Bronsted-acid catalysis. The last part of the thesis was dedicated to the enzymatic catalysis, with particular attention to the use of an enzyme belonging to the class of alcohol dehydrogenase, the Horse Liver Alcohol Dehydrogenase (HLADH) which was selected and used in the enantioselective reduction of aldehydes to enantiopure arylpropylic alcohols. This enzyme has showed an excellent responsiveness to this type of aldehydes and a good tolerance toward organic solvents. Moreover, the fast keto-enolic equilibrium of this class of aldehydes that induce the stereocentre racemization, allows the dynamic-kinetic resolution (DKR) to give the enantiopure alcohol. By analyzing the different reaction parameters, especially the pH and the amount of enzyme, and adding a small percentage of organic solvent, it was possible to control all the parameters involved in the reaction. The excellent enatioselectivity of HLADH along with the DKR of arylpropionic aldehydes, allowed to obtain the corresponding alcohols in quantitative yields and with an optical purity ranging from 64% to >99%.

Studio di catalisi termoattivate per compositi poliuretanici

One of the key processing parameters in thermoset composites manufacturing is to have an optimum balance between open time and cure time. Long open times followed with a fast cure profile (also referred as snap cure or “hockey stick” shaped profiles) are required on applications like Pultrusion, Filament Winding, Resin Transfer Molding (RTM) and Infusion. In this work, several factors affecting the reactivity of a base line polyurethane formulation were studied. The addition of different components such as internal mold release agents, cross-linker, polyols having different molecular structure and isocyanates having different functionality were studied. A literature search was conducted to identify the main catalyst packages existing in the market. The reactivity of catalyst based on tertiary amines, orgamometallic salts, and co-catalyst of amine-organometallic complexes was characterized. Addition of quelants agents such as thioglycerol and acetyl acetone to delay the catalyst activity were also considered. As a consequence of this work a vast reactivity map was generated. This should guide the formulation designer in future product generations for the further development of the mentioned applications. Recommendations on measurements systems and further areas of exploration are also given.

Valorizzazione di molecole da materie prime rinnovabili: la trasformazione del 2,5-diidrossimetilfurano con catalisi acida

The present work is part of a larger project aimed at obtaining compounds of industrial interest from renewable sources. The work is particularly aimed to investigate the reactivity of 2,5-bis-hydroxymethylfuran (BHMF), an important building block of organic nature easily obtainable from biomass, with acid catalysis. Through the study of the reactivity of BHMF in water, in the presence of an heterogeneous acid catalyst (Amberlyst 15), has been developed a new synthetic method for the preparation of α-6-hydroxy-6-methyl-4-enyl-2H-pyran-3-one a derivative whose molecular skeleton is similar to that of natural products which are used in pharmaceutical chemistry. The product is obtained in milder conditions and with better selectivity with respect to the strongly oxidizing conditions with which it is prepared in the literature starting from different precursors containing furan ring.

Studio sull'applicazione di derivati dell'ammina di betti chirali in sistemi catalitici organici

In this thesis, the development of asymmetric α-alkylation of aldehydes using two new organocatalysts is described. Nowadays organocatalized asymmetric synthesis uses preferentially primary or secondary amines. In our case two new Betti bases derivatives have been used as organocatalysts. We tried to find a method based on resolution to obtain both enantiomers with ee major than 90%. At the end we tried them in an organocatalytic processes which involve indole derivatives and aldehydes as substrates. In questa tesi è descritto lo sviluppo del processo di alfa-alchilazione di aldeidi utilizzando due nuovi catalizzatori organici chirali. Al giorno d’oggi la sintesi asimmetrica organo catalitica sfrutta principalmente ammine primarie e secondarie chirali. Come organo catalizzatori, sono stati utilizzati due nuovi derivati della base di Betti. E’ stato ricercato un metodo che permettesse di risolvere entrambi gli enantiomeri e che permettesse di ottenere un eccesso enantiomerico maggiore del 90%. Infine questi catalizzatori sono stati utilizzati e ottimizzati in micro-processi che utilizzano un substrato indolico e di un’aldeide.

Idrolisi diretta di cellulosa e lignocellulosa in catalisi eterogenea

This work deals with a comparison of the catalytic behavior of several heterogeneous acid catalysts in the direct hydrolysis of an untreated softwood dust. Amongst the various catalysts investigated, some were characterized by relatively high yield to monosaccharides, such as a Zirconium phosphate and the reference Amberlyst 15. Conversely, some catalyst types, ie, Sn/W mixed oxide and Zirconia-grafted trifluoromethanesulphonic acid, were selective into glucose, since sugars derived from hemicellulose dissolution and hydrolysis were rapidly degraded. A detailed analysis of the reactivity of Zr/P/O was pursued, in the hydrolysis of both untreated and ball-milled microcrystalline cellulose; at 150°C and 3h reaction time, the catalyst gave high selectivity to glucose, with negligible formation of 5-hydroxymethylfurfural, and moderate cellulose conversion. After ball-milling of the cellulose, a remarkable increase of conversion was achieved, still with a high selectivity to glucose and very low formation of degradation compounds. The catalyst showed high affinity for β-1,4-glucans, as demonstrated by the activity in cellobiose hydrolysis into glucose.

Studio di tecniche di modulazione per inverter a tensione impressa in azionamenti con macchina asincrona esafase asimmetrica

Modellizzazione della macchina asincrona esafase asimmetrica mediante i vettori di spazio trifase. Determinazione delle trasformazioni esafase dallo studio del campo magnetico rotante. Modellizzazione della macchina asincrona esafase asimmetrica mediante i vettori di spazio esafase. Studio dell’inverter esafase e delle relative tecniche di modulazione. Definizione del modello Simulink dell’azionamento. Studio del ripple della corrente di carico.

Regio- e stereocontrollo nell'addizione viniloga di alchilidenossindoli a nitrostireni via organocatalisi.

The topic of this work is the simultaneous activation, promoted by 9-epi-NH2-DHQA-TU, of alkylideneoxindole and nistirene derivatives, respectively via base catalysis and hydrogen-bond catalysis. The chosen substrates, of high biological interest, are used as starting materials for a vinylogous Michael addition where we wish to control the stereochemistry of the two asymmetric carbons far away from the active site, respectively in γ and δ position. Due to the particular structure of the starting oxindoles, it is hereby presented the first variant of this reaction performed at its highest level of stereochemical complexity. It is possible as a matter of fact, to generate 24 isomers of the product. Specifically, given that the nucleophilic attack can occur from various, non equivalent regions of the starting molecule, our main goal was to achieve a complete regio- and stereocontrol of the reaction. We have verified that the reported organocatalyzed vinylogous reaction represents a valid integration of the metal-catalyzed one, since it affords highly stereochemically complex products in good to high yields and excellent optical purity.

Reazioni tandem organocatalitiche enantioselettive di derivati indolici e nitroetene: un accesso diretto a precursori di alcaloidi dell'Ergot

Il lavoro discusso in questa tesi è lo sviluppo di un metodo sintetico basato sulla catalisi asimmetrica che consente di ottenere precursori di alcuni alcaloidi dell’Ergot in forma enantioarricchita. La reazione sviluppata consiste in un processo domino Friedel-Crafts/nitro-Michael fra indoli sostituiti in posizione 4 con un accettore di Michael e nitroetene. I catalizzatori utilizzati sono in grado di attivare il nitroetene per la Friedel-Crafts mediante legami a idrogeno e di indurre stereoselezione nella successiva ciclizzazione di Michael intramolecolare. Mediante la procedura ottimizzata è possibile ottenere una serie di indoli policiclici, potenziali precursori sintetici di alcaloidi dell’Ergot, con buone rese ed enantioselezioni.

Analisi per via simulativa del protocollo tcp a ritrasmissione asimmetrica anticipata su wifi

Viene implementato un algoritmo di ritrasmissione dei pacchetti nel protocollo TCP. Lo studio viene fatt utilizzando il simulatore OMNET++ e il framework INET

TCP a ritrasmissione asimmetrica anticipata su WiFi

Nell'ambito dell'architettura RWMA per l'aumento della qualità del servizio in ambiente wireless, si colloca la ritrasmissione asimmetrica anticipata su wifi. Lo scopo è migliorare ed ottimizzare la comunicazione nel livello datalink tra Access Point e Nodo Mobile per quanto riguarda le connessioni TCP. Il progetto è sviluppato nell'ambiente simulativo OMNET++/INET.

TCP a ritrasmissione asimmetrica anticipata su Access Point WiFi

La perdita di pacchetti durante una trasmissione su una rete Wireless influisce in maniera fondamentale sulla qualità del collegamento tra due End-System. Lo scopo del progetto è quello di implementare una tecnica di ritrasmissione asimmetrica anticipata dei pacchetti perduti, in modo da minimizzare i tempi di recupero dati e migliorare la qualità della comunicazione. Partendo da uno studio su determinati tipi di ritrasmissione, in particolare quelli implementati dal progetto ABPS, Always Best Packet Switching, si è maturata l'idea che un tipo di ritrasmissione particolarmente utile potrebbe avvenire a livello Access Point: nel caso in cui la perdita di pacchetti avvenga tra l'AP e il nodo mobile che vi è collegato via IEEE802.11, invece che attendere la ritrasmissione TCP e Effettuata dall'End-System sorgente è lo stesso Access Point che e effettua una ritrasmissione verso il nodo mobile per permettere un veloce recupero dei dati perduti. Tale funzionalità stata quindi concettualmente divisa in due parti, la prima si riferisce all'applicazione che si occupa della bufferizzazione di pacchetti che attraversano l'AP e della loro copia in memoria per poi ritrasmetterli in caso di segnalazione di mancata acquisizione, la seconda riguardante la modifica al kernel che permette la segnalazione anticipata dell'errore. E' già stata sviluppata un'applicazione che prevede una ritrasmissione anticipata da parte dell'Access Point Wifi, cioè una ritrasmissione prima che la notifica di avvenuta perdita raggiunga l'end-point sorgente e appoggiata su un meccanismo di simulazione di Error Detection. Inoltre è stata anche realizzata la ritrasmissione asincrona e anticipata del TCP. Questo documento tratta della realizzazione di una nuova applicazione che fornisca una più effciente versione del buffer di pacchetti e utilizzi il meccanismo di una ritrasmissione asimmetrica e anticipata del TCP, cioè attivare la ritrasmissione su richiesta del TCP tramite notifiche di validità del campo Acknowledgement.

Simulazione del protocollo TCP a ritrasmissione asimmetrica anticipata su WiFi

Progettazione e realizzazione di uno strumento simulativo che permette l'analisi degli effettivi vantaggi portati dalla ritrasmissione anticipata su WiFi applicata al protocollo TCP.

Addizione di Michael organocatalitica asimmetrica di composti 1,3-dicarbonilici ad orto-chinoni metidi: un nuovo e semplice approccio alla preparazione di 4H-cromeni e croman-2-oni otticamente attivi

The work described in this thesis deals with the development of the asymmetric organocatalytic conjugate addition reaction of 1,3-dicarbonyl compounds to ortho-quinone methides. Due to their instability, these synthetically appealing intermediates have not been fully exploited in catalytic asymmetric settings. In this work, the instability of ortho-quinone methides is overcome by their generation in situ under mild basic conditions, starting from the corresponding sulfonyl derivatives. The bifunctional catalysts used are able to activate both substrates for the reaction, by means of a synergic action of the two catalytic sites, inducing at the same time high enantioselection in the addition step. The reaction leads to the generation of a 2-alkylphenolic framework, featuring a chiral centre at the benzylic position. In particular, the employment of acetylacetone and Meldrum acid as nucleophiles has allowed the obtainment of 4H-chromenes and chroman-2-ones in good yields and generally excellent enantioselectivities. These compounds are synthetic precursors of several natural products, some of which showing interesting biological activity, and of some active pharmaceutical ingredients used in commercial drugs.