Voluntary intake of dry matter and performance of Nellore cows and their Nellore and crossbred Simental × Nellore calves

This study aimed to investigate the influence of calf genetic group on the performance of Nellore lactating cows. The variables studied included milk ingestion, pasture intake, calf weight gain and cow body weight. A total of 13 Nellore calves and 8 crossbred Simental × Nellore calves were used, all born from Nellore mothers. During the experimental period of 210 days, calves were weighted at birth and at 30-day intervals, whereas cows were weighed every 14 days. Milk intake was estimated using the weigh-suckle-weigh method. Pasture intake was determined 6, 12, and 24 weeks after birth by using chromic oxide as an external marker and indigestible acid detergent fiber as an internal marker. Average weight of crossbred calves was 10.1 kg and their milk intake was 0.42 kg higher than in purebred calves. There was no difference, however, in pasture intake between genetic groups. In Nellore cows, body weight and pasture consumption (9.2 kg of DM/cow/day) were not influenced by calf heterosis.

A comparative study of production performance and animal health practices in organic and conventional dairy systems

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Reproductive performance and reconception of nellore cows according to their pure- or cross-bred calves

Contents The objective of the present research was to evaluate the effect of a calf's genetic group on the productive and reproductive efficiency of its Nellore dam. Fixed-time artificial insemination was applied to 800 cows using semen extracted from Nellore, Simmental and Angus Red bulls. Four hundred eleven cows calved, producing 119 Nellore, 103 1/2Simmental-1/2Nellore and 189 1/2Nellore-1/2Angus Red calves. The second mating period, which paired Nellore cows with Simmental bulls, was initiated 10days after parturitions began and lasted for 5months. Based on the two successive parturitions, the cumulative parturition rate for calving periods of 3, 4 and 5months was calculated. Although no significant difference was observed for birth weight among the genetic groups, cross-bred calves weighed, on average, 10% more than did pure-bred calves at the age of 205days. Nellore dams experienced a gestation period that was 7days longer than did the cross-bred dams, and the former showed a higher parturition rate at 90 and 120days of the calving season, but not at 150days (calving rates of 80.6, 76.4 and 76.2% for mothers of Nellore, 1/2Nellore-1/2Angus Red and 1/2Nellore-1/2Simmental, respectively, p>0.05). At 90 and 120days, Nellore dams produced more kg of calf per mated dam. In conclusion, in a short breeding season, Nellore dams nursing pure-bred Nellore calves were found to have a higher biological efficiency compared with Nellore dams nursing cross-bred calves.

Do muscle strengthening exercises improve performance in the 6-minute walk test in postmenopausal women?

Background: Walking speed seems to be related to aerobic capacity, lower limb strength, and functional mobility, however it is not clear whether there is a direct relationship between improvement in muscle strength and gait performance in early postmenopausal women. Objective: To evaluate the effect of muscle strengthening exercises on the performance of the 6-minute walk test in women within 5 years of menopause. Methods: The women were randomized into control group (n=31), which performed no exercise, and exercise group (n=27), which performed muscle strengthening exercises. The exercises were performed twice a week for 3 months. The exercise protocol consisted of warm-up, stretching, and strengthening of the quadriceps, hamstring, calf, tibialis anterior, gluteus maximus, and abdominal muscles, followed by relaxation. Muscular strength training started with 60% of 1MR (2 series of 10-15 repetitions), reaching 85% until the end of the 3-month period (4 series of 6 repetitions each). Results: The between-group comparisons pre- and post-intervention did not show any difference in distance walked, heart rate or blood pressure (p>0.05), but showed differences in muscle strength post-intervention, with the exercise group showing greater strength (p<0.05). In the within-group comparison, there were differences in final heart rate and quadriceps and hamstring strength pre- and post-intervention in the exercise group (p<0.05). Conclusion: The results suggest that muscle strengthening of the lower limbs did not improve performance in the 6-minute walk test in this population of postmenopausal women. Trial registration ACTRN12609001053213.

Mechanical Performance of Cylindrical and Dual-Core Pedicle Screws After Repeated Insertion

Study Design. Ex vivo study of the mechanical performance of cylindrical and dual-core pedicle screws after insertion, removal, and reinsertion in the same hole. Objective. To evaluate the effect of repeated use of same screw hole on the insertion torque and the retentive strength of the cylindrical and dual-core screws. Summary of Background Data. Insertion and removal of pedicle screws is sometimes necessary during surgical procedure to assess the integrity of the pilot-hole wall. However, this maneuver may compromise the implant-holding capacity. Methods. Sixty thoracolombar vertebrae (T13-L5), harvested from 10 healthy calves, were used to insert 2 different designs of pedicle screws: cylindrical (5.0-mm outer diameter) and dual-core screws (5.2-mm outer diameter). Three experimental groups were created on the basis of the number of insertions of the screws and 2 subgroups were established according to the core pedicle screw design (dual-core and cylindrical). The insertion torque was measured during initial insertion, second insertion, and third insertion. Pullout screw tests were performed using a universal testing machine to evaluate the pullout strength after initial insertion, second insertion, and third insertion. Results. Significant reductions of 38% in mean insertion torque and 30% in mean pullout strength of dual-core screw were observed between the initial insertion and the third insertion. The cylindrical screw observed significant reductions of 52.5% in mean insertion torque and 42.3% in mean pullout strength between the initial insertion and the third insertion. A reduction of mean insertion torque and pullout strength between the first insertion and the second insertion but without significance was also observed for both types of screws. Conclusion. Insertions and reinsertion of either cylindrical or dual-core pedicle screws have compromised insertion torque and pullout strength of the implants as measured by mechanical tests.

ECG-triggered skeletal muscle stimulation improves hemodynamics and physical performance of heart failure patients

BACKGROUND: Muscular counterpulsation (MCP) was developed for circulatory assistance by stimulation of peripheral skeletal muscles. We report on a clinical MCP study in patients with and without chronic heart failure (CHF). METHODS AND RESULTS: MCP treatment was applied (30 patients treated, 25 controls, all under optimal therapy) for 30 minutes during eight days by an ECG-triggered, battery-powered, portable pulse generator with skin electrodes inducing light contractions of calf and thigh muscles, sequentially stimulated at early diastole. Hemodynamic parameters (ECG, blood pressure and echocardiography) were measured one day before and one day after the treatment period in two groups: Group 1 (9 MCP, 11 no MCP) with ejection fraction (EF) above 40% and Group 2 (21 MCP, 14 no MCP) below 40%. In Group 2 (all patients suffering from CHF) mean EF increased by 21% (p<0.001) and stroke volume by 13% (p<0.001), while end systolic volume decreased by 23% (p<0.001). In Group 1, the increase in EF (6%) and stroke volume (8%) was also significant (p<0.05) but less pronounced than in Group 2. Physical exercise duration and walking distance increased in Group 2 by 56% and 72%, respectively. CONCLUSIONS: Noninvasive MCP treatment for eight days substantially improves cardiac function and physical performance in patients with CHF.

Critical Control Points for Profitability in the Cow-Calf Enterprise

Financial, economic, and biological data collected from cow-calf producers who participated in the Illinois and Iowa Standardized Performance Analysis (SPA) programs were used in this study. Data used were collected for the 1996 through 1999 calendar years, with each herd within year representing one observation. This resulted in a final database of 225 observations (117 from Iowa and 108 from Illinois) from commercial herds with a range in size from 20 to 373 cows. Two analyses were conducted, one utilizing financial cost of production data, the other economic cost of production data. Each observation was analyzed as the difference from the mean for that given year. The independent variable utilized in both the financial and economic models as an indicator of profit was return to unpaid labor and management per cow (RLM). Used as dependent variables were the five factors that make up total annual cow cost: feed cost, operating cost, depreciation cost, capital charge, and hired labor, all on an annual cost per cow basis. In the economic analysis, family labor was also included. Production factors evaluated as dependent variables in both models were calf weight, calf price, cull weight, cull price, weaning percentage, and calving distribution. Herd size and investment were also analyzed. All financial factors analyzed were significantly correlated to RLM (P < .10) except cull weight, and cull price. All economic factors analyzed were significantly correlated to RLM (P < .10) except calf weight, cull weight and cull price. Results of the financial prediction equation indicate that there are eight measurements capable of explaining over 82 percent of the farm-to-farm variation in RLM. Feed cost is the overriding factor driving RLM in both the financial and economic stepwise regression analyses. In both analyses over 50 percent of the herd-to-herd variation in RLM could be explained by feed cost. Financial feed cost is correlated (P < .001) to operating cost, depreciation cost, and investment. Economic feed cost is correlated (P < .001) with investment and operating cost, as well as capital charge. Operating cost, depreciation, and capital charge were all negatively correlated (P < .10) to herd size, and positively correlated (P < .01) to feed cost in both analyses. Operating costs were positively correlated with capital charge and investment (P < .01) in both analyses. In the financial regression model, depreciation cost was the second critical factor explaining almost 9 percent of the herd-to-herd variation in RLM followed by operating cost (5 percent). Calf weight had a greater impact than calf price on RLM in both the financial and economic regression models. Calf weight was the fourth indicator of RLM in the financial model and was similar in magnitude to operating cost. Investment was not a significant variable in either regression model; however, it was highly correlated to a number of the significant cost variables including feed cost, depreciation cost, and operating cost (P < .001, financial; P < .10, economic). Cost factors were far more influential in driving RLM than production, reproduction, or producer controlled marketing factors. Of these cost factors, feed cost had by far the largest impact. As producers focus attention on factors that affect the profitability of the operation, feed cost is the most critical control point because it was responsible for over 50 percent of the herd-to-herd variation in profit.

Standardized Performance Analysis (SPA) Summary for 1999-2000 Veterinary Medicine Students

Nine Iowa State University veterinary medical students completed SPA records on herds from Iowa, North Dakota and South Dakota. The Iowa herds were included in the SPA summary for Iowa, but the six North and South Dakota herds were summarized separately. These six herds had an average herd size of 371 cows and had a financial return to capital, labor and management of $175 per cow. Total financial cost per cow averaged $286 for these herds with a range of $211 to $388. Feed utilized averaged 4,442 pounds of dry matter per cow and the average pounds of calf produced per exposed female was 506 pounds.

Effects of different types of solid feeds on health status and performance of Swiss veal calves. I. Basic feeding with milk by-products

The objective of this study was to identify a suitable alternative to the current practice of complementing the feeding of milk by-products with straw. The influence of 5 different types of solid feeds on health and performance of Swiss veal calves was investigated in 2 production cycles of 200 veal calves each with a mean initial age of 40 days (d). The calves were housed in groups of 40 in stalls with outside pen. Liquid feeding consisted of a milk by-product combined with an additional skim milk powder ad libitum. Groups were assigned to 1 of the 5 following experimental solid feeds provided ad libitum: mix (composition: soy flakes, corn, barley, wheat, oat, barley middling, plant oil, molasses), whole plant corn pellets, corn silage, hay, and wheat straw as control. Daily dry matter intake per calf averaged 2.25 kg of the liquid food, 0.16 kg of straw, 0.33 kg of mix, 0.47 kg of corn silage, 0.38 kg of corn pellets, and 0.39 kg of hay. No significant differences (P > 0.05) among groups were found in calf losses that amounted to 4.8 % (68 % because of gastrointestinal disorders). Four percent of the calves were slaughtered prematurely. Daily doses of antibiotics were higher in the mix (36.9 d, P < 0.01) and in the corn silage groups (35 d, P < 0.01) compared to control. Compared to the 4 other groups, calves of the straw group showed the highest prevalence of abnormal ruminal content (73 %, P < 0.05), of abnormal ruminal papillae (42 %, P < 0.05), of abomasal fundic lesions (13.5 %, P < 0.1), and the lowest number of chewing movements per bolus (45, P < 0.05). The hemoglobin concentration averaged 85 g/l at the beginning and 99 g/l at the end of the fattening period with no significant differences among groups (P > 0.1). The duration of the fattening period averaged 114 d, slaughter age 157 d, and carcass weight 122 kg. The average daily weight gain (ADG) was highest in the control group straw (1.35 kg), and lowest in the hay group (1.22 kg, P < 0.01). The number of carcasses classified as C, H, and T (very high to medium quality) was lower in the hay group compared to straw (P < 0.01). No significant differences between groups were found in meat color (P > 0.1): 73 % of the carcasses were assessed as pale (267/364), 18 % as pink (66/364), and 9 % (31/364) as red. The results reveal that whole-plant corn pellets are most consistent with an optimal result combining the calves' health and fattening performance. Therefore, it can be recommended as an additional solid feed for veal calves under Swiss conditions.

Results of herd health management in veal calf production

The aim of this study was to document experience gained with herd health management in veal calf production and to describe the calves' most frequent health problems. Fifteen farms with an 'all-in-all-out' animal flow system and 20 farms with a continuous animal flow system were investigated and data on animal movements, housing, feeding, medical treatments, and management were collected. Cadavers underwent pathological examination, and data were recorded from the carcasses of slaughtered calves. On the 15 'all-in-all-out'-farms, 2'747 calves were clinically examined by the contract-veterinarian upon arrival at the farm, and 71,1 % of the calves showed at least one sign of illness. The main causes of death were with 54,9 % digestive disorders (a perforating abomasal ulcer being the most frequent diagnosis), followed by respiratory diseases (29,6 %, mainly pneumonia). The meat color of 25 % of the carcasses was red. Calves from farms with the continuous animal flow system, which recruit mainly animals originating from the same farm, showed significantly better results regarding antibiotic use, performance and carcass quality than those calves from farms with the 'all-in-all-out'-system.

Feeding mastitis milk to organic dairy calves: effect on health and performance during suckling and on udder health at first calving

BackgroundInfection pathways of S. aureus udder infections in heifers are still not well understood. One hypothesis is that calves become infected with S. aureus via feeding mastitis milk. Especially on small-scale farms, pasteurisers are not economic. The purpose of this randomised comparative study was to investigate the influence of feeding milk containing S. aureus genotype B (SAGTB) on the health and development of calves and udder health of the respective heifers. Additionally, a method reducing the bacterial load to obtain safer feeding milk was tested. Thirty-four calves were fed mastitis milk from cows with subclinical SAGTB mastitis. One group was fed untreated milk (UMG). For the other group, milk was thermised at 61°C for one minute (heat treated milk group¿=¿HMG). After weaning, calves were followed up until first calving. A milk sample of these heifers was taken at first milking to compare udder health of both groups.ResultsThermisation of milk led to an effective reduction of S. aureus in the feeding milk. 78% of the analysed pools were free of S. aureus, a reduction of at least one log was obtained in the other pools.Quarter milk samples revealed that two heifers had a S. aureus intramammary infection, but caused by a genotype different from genotype B.During the suckling period, the UMG had a significantly higher incidence rate of 1.09 diarrhoea cases per 100 calf days at risk compared to 0.26 cases per 100 calf days in the HMG (p¿<¿0.05).ConclusionsUnder the conditions of this study, no effects of feeding milk containing SAGTB on udder health after first calving were observed. But a power analysis indicated that the sample size in the current setup is insufficient to allow for assessment on mastitis risk after SAGTB exposition, as a minimal number of 4 calves infected (vs. 0 in the HMG) would have shown significant effects. High bacterial load, however, was associated with an increased incidence rate of diarrhoea. Thus, thermisation as a minimal preventive measure before feeding mastitis milk to calves might be beneficial for maintaining calf health.

Measurement of 8-hydroxy-2′-deoxyguanosine in DNA by high-performance liquid chromatography-mass spectrometry: comparison with measurement by gas chromatography-mass spectrometry

Measurement of 8-hydroxy-2′-deoxyguanosine (8-OH-dGuo) in DNA by high-performance liquid chromatography/mass spectrometry (LC/MS) was studied. A methodology was developed for separation by LC of 8-OH-dGuo from intact and modified nucleosides in DNA hydrolyzed by a combination of four enzymes: DNase I, phosphodiesterases I and II and alkaline phosphatase. The atmospheric pressure ionization-electrospray process was used for mass spectral measurements. A stable isotope-labeled analog of 8-OH-dGuo was used as an internal standard for quantification by isotope-dilution MS (IDMS). Results showed that LC/IDMS with selected ion-monitoring (SIM) is well suited for identification and quantification of 8-OH-dGuo in DNA at background levels and in damaged DNA. The sensitivity level of LC/IDMS-SIM was found to be comparable to that reported previously using LC-tandem MS (LC/MS/MS). It was found that approximately five lesions per 106 DNA bases can be detected using amounts of DNA as low as 2 µg. The results also suggest that this lesion may be quantified in DNA at levels of one lesion per 106 DNA bases, or even lower, when more DNA is used. Up to 50 µg of DNA per injection were used without adversely affecting the measurements. Gas chromatography/isotope-dilution MS with selected-ion monitoring (GC/IDMS-SIM) was also used to measure this compound in DNA following its removal from DNA by acidic hydrolysis or by hydrolysis with Escherichia coli Fpg protein. The background levels obtained by LC/IDMS-SIM and GC/IDMS-SIM were almost identical. Calf thymus DNA and DNA isolated from cultured HeLa cells were used for this purpose. This indicates that these two techniques can provide similar results in terms of the measurement of 8-OH-dGuo in DNA. In addition, DNA in buffered aqueous solution was damaged by ionizing radiation at different radiation doses and analyzed by LC/IDMS-SIM and GC/IDMS-SIM. Again, similar results were obtained by the two techniques. The sensitivity of GC/MS-SIM for 7,8-dihydro-8-oxoguanine was also examined and found to be much greater than that of LC/MS-SIM and the reported sensitivity of LC/MS/MS for 8-OH-dGuo. Taken together, the results unequivocally show that LC/IDMS-SIM is well suited for sensitive and accurate measurement of 8-OH-dGuo in DNA and that both LC/IDMS-SIM and GC/IDMS-SIM can provide similar results.