Experimental study of the porosity and microstructure of self-compacting concrete (SCC) with binary and ternary mixes of fly ash and limestone filler

Abstract Self-compacting concrete (SCC) can soon be expected to replace conventional concrete due to its many advantages. Its main characteristics in the fresh state are achieved essentially by a higher volume of mortar (more ultrafine material) and a decrease of the coarse-aggregates. The use of over-large volumes of additions such as fly ash (FA) and/or limestone filler (LF) can substantially affect the concrete's pore structure and consequently its durability. In this context, an experimental programme was conducted to evaluate the effect on the concrete's porosity and microstructure of incorporating FA and LF in binary and ternary mixes of SCC. For this, a total of 11 SCC mixes were produced: 1 with cement only (C); 3 with C + FA in 30%, 60% and 70% substitution (fad); 3 with C + LF in 30%, 60% and 70% fad; 4 with C + FA + LF in combinations of 10-20%, 20-10%, 20-40% and 40-20% fad, respectively. The results enabled conclusions to be established regarding the SCC's durability, based on its permeability and the microstructure of its pore structure. The properties studied are strongly affected by the type and quantity of additions. The use of ternary mixes also proves to be extremely favourable, confirming the beneficial effect of the synergy between these additions. © 2015 Elsevier Ltd. All rights reserved.

Fresh-state properties of self-compacting mortar and concrete with combined use of limestone filler and fly ash

This paper presents the results of a study on the behaviour of self-compacting concrete (SCC) in the fresh and hardened states, produced with binary and ternary mixes of fly ash (FA) and limestone filler (LF), using the method proposed by Nepomuceno. His method determines the SCC composition parameters in the mortar phase (self-compacting mortar - SCM) easily and efficiently, whilst guaranteeing the SCC properties in both the fresh and hardened states. For this, 11 SCMs were studied: one with cement (C) only; three with FA at 30%, 60% and 70% C substitution; three with LF at 30%, 60% and 70% C substitution; four with FA + LF in combinations of 10-20%, 20-10%, 20-40% and 40-20% C substitution. Once the composition of these mortars was defined, 18 SCC mixes were produced: 14 binary SCC mixes were produced with the seven binary mortar mixes, and four ternary SCC mixes were produced with the four ternary mortar mixes. In addition to the methodology proposed by Nepomuceno, the combined use of FA and LF in ternary mixtures was tested. The results confirmed that the method could yield SCC with adequate properties in both the fresh and hardened states. It was also possible to determine the SCC composition parameters in the mortar phase (self-compacting mortar - SCM) that will guarantee the SCC properties in both the fresh and hardened states, as confirmed through the optimized behaviour of the SCC in the fresh state and the promising results in the hardened state (compressive strength). The potential demonstrated by the joint use of LF and FA through the synergetic interaction of both additions is emphasized.

Durability performance of self-compacting concrete (SCC) with binary and ternary mixes of fly ash and limestone filler

The basic objective of this work is to evaluate the durability of self-compacting concrete (SCC) produced in binary and ternary mixes using fly ash (FA) and limestone filler (LF) as partial replacement of cement. The main characteristics that set SCC apart from conventional concrete (fundamentally its fresh state behaviour) essentially depend on the greater or lesser content of various constituents, namely: greater mortar volume (more ultrafine material in the form of cement and mineral additions); proper control of the maximum size of the coarse aggregate; use of admixtures such as superplasticizers. Significant amounts of mineral additions are thus incorporated to partially replace cement, in order to improve the workability of the concrete. These mineral additions necessarily affect the concrete’s microstructure and its durability. Therefore, notwithstanding the many well-documented and acknowledged advantages of SCC, a better understanding its behaviour is still required, in particular when its composition includes significant amounts of mineral additions. An ambitious working plan was devised: first, the SCC’s microstructure was studied and characterized and afterwards the main transport and degradation mechanisms of the SCC produced were studied and characterized by means of SEM image analysis, chloride migration, electrical resistivity, and carbonation tests. It was then possible to draw conclusions about the SCC’s durability. The properties studied are strongly affected by the type and content of the additions. Also, the use of ternary mixes proved to be extremely favourable, confirming the expected beneficial effect of the synergy between LF and FA. © 2015 RILEM.

Dynamic process simulation of limestone calcination in normal shaft kilns

Limestone, calcination, normal shaft kiln, process simulation, temperature profiles

Fresh-water limestone from the Torola Valley, northeastern El Salvador / Sharat Kumar Roy -- and Robert Kriss Wyant --.

v.10:no.16(1953)

Caryocrinitidae (Echinodermata: Rhombifera) of the Laurel Limestone of southeastern Indiana / T. J. Frest --

v.30:no.4(1975)

Facies, depositional environment, and palaeoecology of the Middle Triassic Cassina Beds (Meride Limestone, Monte San Giorgio, Switzerland).

The Ladinian Cassina beds belong to the fossiliferous levels of the world-famous Middle Triassic Monte San Giorgio Lagerstatte (UNESCO World Heritage List, Canton Ticino, Southern Alps). Although they are a rich archive for the depositional environment of an important thanatocoenosis, previous excavations focused on vertebrates and particularly on marine reptiles. In 2006, the Museo Cantonale di Storia Naturale (Lugano) started a new research project focusing for the first time on microfacies, micropalaeontological, palaeoecological and taphonomic analyses. So far, the upper third of the sequence has been excavated on a surface of around 40 m(2), and these new data complete those derived from new vertebrate finds (mainly fishes belonging to Saurichthys, Archaeosemionotus, Eosemionotus and Peltopleurus), allowing a better characterization of the basin. Background sedimentation on an anoxic to episodically suboxic seafloor resulted in a finely laminated succession of black shales and limestones, bearing a quasi-anaerobic biofacies, which is characterized by a monotypic benthic foraminiferal meiofauna and has been documented for the first time from the whole Monte San Giorgio sequence. Event deposition, testified by turbidites and volcaniclastic layers, is related to sediment input from basin margins and to distant volcanic eruptions, respectively. Fossil nekton points to an environment with only limited connection to the open sea. Terrestrial macroflora remains document the presence of emerged areas covered with vegetation and probably located relatively far away. Proliferation of benthic microbial mats is inferred on the basis of microfabrics, ecological considerations and taphonomic (both biostratinomic and diagenetic) features of the new vertebrate finds, whose excellent preservation is ascribed to sealing by biofilms. The occurrence of allochthonous elements allows an insight into the shallow-waters of the adjoining time-equivalent Salvatore platform. Finally, the available biostratigraphic data are critically reviewed.

Cadmium distribution in soils covering Jurassic oolitic limestone with high Cd contents in the Swiss Jura

Oolitic carbonates belonging to the Hauptrogenstein Formation of Bajocian (Middle Jurassic) age have been shown to be anomalously enriched in cadmium (Cd) throughout the Jura Mountains. Soils associated with this type of rock substratum may be naturally polluted with regards to Cd. At Schleifenberg (Canton Basel Land, Switzerland) the Hauptrogenstein Formation is almost entirely exposed along a trail on its SW flank. Cadmium concentrations were systematically measured throughout this formation and Cd enrichments in rocks are shown to occur to a maximum content of 4.9 mg kg(-1). We investigated associated soils, which cover the entire outcrop, and show that they have been formed through the weathering of the underlying bedrock and through the uptake of colluvial limestone fragments from the same and older formations. Cadmium contents in the soils reach a maximum value of 2.0 mg kg(-1), thereby exceeding the official Swiss indicative guideline value for soils fixed at 0.8 mg.kg(-1). Mineralogical analyses on the soils and associated bedrock suggest that no allochthonous component related to aeolian transport is present. Sequential extractions applied to selected soil samples show that about half of the Cd resides in the carbonate fraction coming from the fractured parent-rock, while the Cd released from the weathered carbonates is associated either with organic matter (over 10%) or with Fe and Mn-oxihydroxides (approximately 30%). No exchangeable Cd phase was found and this, together with the buffer capacity of this calcareous soil, suggests that the amount of mobile Cd is quite negligible in this soil, which also greatly reduces the amount of bioavailable

The Ladinian flora from the Cassina beds (Meride Limestone, Monte San Giorgio, Switzerland): Preliminary results

A newly opened excavation in the Cassina beds of the Lower Meride Limestone (Monte San Giorgio UNESCO WHL, Canton Ticino, Southern Alps) has yielded a small collection of Ladinian plant fossils, together with vertebrate (mostly fish) and invertebrate remains The flora contains at least five species, conifer remains assignable to the genera Elatocladus, Voltzia and Pelourdea are the most common elements A new species, Elatocladus cassinae n Sp, is formally, described Co-occurring with the conifers arc seed ferns (Ptilozamites) and a few putative cycadalean remains (Taemopteris) Among the identified genera, only Volizia has previously been reported from Monte San Giorgio The fossils presented in this paper indicate that a diversified flora thrived in the region during the Ladman Floral composition and preservation patterns are suggestive of a taphonomically-biased record and a relatively far-away source area

Discovery of Dogger in the internal limestone dorsale to the S of Tetouan (Northern Rif, Morocco) - Paleogeographic consequences

The Dogger (Bajocian-Lower Bathonian) has been dated for the first time in the internal Limestone Dorsale of the Rif by means of ammonites and radiolarians. It shows radiolarian and nodular limestone facies. It is concluded, then, that radiolarian sedimentation began during the Dogger in this realm, and that a drowning of the `'Ghomaride margin'' occurred at that time.

Unravelling the enigmatic origin of calcitic nanofibres in soils and caves: purely physicochemical or biogenic processes?

Calcitic nanofibres are ubiquitous habits of sec- ondary calcium carbonate (CaCO3 ) accumulations observed in calcareous vadose environments. Despite their widespread occurrence, the origin of these nanofeatures remains enig- matic. Three possible mechanisms fuel the debate: (i) purely physicochemical processes, (ii) mineralization of rod-shaped bacteria, and (iii) crystal precipitation on organic templates. Nanofibres can be either mineral (calcitic) or organic in na- ture. They are very often observed in association with needle fibre calcite (NFC), another typical secondary CaCO3 habit in terrestrial environments. This association has contributed to some confusion between both habits, however they are truly two distinct calcitic features and their recurrent asso- ciation is likely to be an important fact to help understanding the origin of nanofibres. In this paper the different hypotheses that currently exist to explain the origin of calcitic nanofibres are critically reviewed. In addition to this, a new hypothe- sis for the origin of nanofibres is proposed based on the fact that current knowledge attributes a fungal origin to NFC. As this feature and nanofibres are recurrently observed together, a possible fungal origin for nanofibres which are associated with NFC is investigated. Sequential enzymatic digestion of the fungal cell wall of selected fungal species demonstrates that the fungal cell wall can be a source of organic nanofibres. The obtained organic nanofibres show a striking morpho- logical resemblance when compared to their natural coun- terparts, emphasizing a fungal origin for part of the organic nanofibres observed in association with NFC. It is further hy- pothesized that these organic nanofibres may act as templates for calcite nucleation in a biologically influenced mineraliza- tion process, generating calcitic nanofibres. This highlights the possible involvement of fungi in CaCO3 biomineraliza- tion processes, a role still poorly documented. Moreover, on a global scale, the organomineralization of organic nanofi- bres into calcitic nanofibres might be an overlooked process deserving more attention to specify its impact on the biogeo- chemical cycles of both Ca and C.

Evidence for an organic origin of pedogenic calcitic nanofibres

Calcium carbonate nanofibres are found in numerous terrestrial environments, often associated with needle fibre calcite. This study attempts to mimic the natural system and generate comparable crystalline structures. A comparison of natural and synthesized nanofibre structures, using HRTEM as well as electron energy loss spectroscopy (EELS) and electron spectroscopic imaging (ESI), has demonstrated that this type of nanocrystal can result from precipitation on organic templates, most likely cellulose nanofibres. This study emphasizes the fundamental role of organic templates in the precipitation of calcium carbonate in vadose environments, even at the nanoscale.