Caracterização e aplicação de vermicultura natural e quimicamente modificada na adsorção de azul de metileno

Chemical modification of clays has been extremely studied in the search for improvements of their properties for use in various areas, such as in combating pollution by industrial effluents and dyes. In this work, the vermiculite was chemically modified in two ways, characterized and evaluated the adsorption of methylene blue dye. First was changed with the addition of a surfactant (hexadecyltrimethylammonium bromide, BHTA) making it an organophilic clay and then by adding an acid (HCl) by acid activation. Some analyzes were performed as X-ray fluorescence (FRX), X-ray diffraction (DRX), adsorption isotherms of methylene blue dye, infrared (FTIR) , scanning electron microscopy (SEM), thermal gravimetric analysis and spectroscopy energy dispersive (EDS). Analysis by FRX of natural vermiculite indicates that addition of silicon and aluminum, clay presents in its structure the magnesium, calcium and potassium with 16 % organic matter cations. The DRX analyzes indicated that the organic vermiculite was an insertion of the surfactant in the space between the lamellae, vermiculite and acid partial destruction of the structure with loss of crystallinity. The adsorption isotherms of methylene blue showed that there was a significant improvement in the removal of dye to the vermiculite with the addition of cationic surfactant hexadecyltrimethylammonium bromide and treatment with acid using HCl 2 mol/L. In acid vermiculites subsequently treated with surfactant, the adsorption capacity increased with respect to natural vermiculite, however was much lower compared vermiculite modified with acid and surfactant separately. Only the acidic vermiculite treated with surfactant adjusted to the Langmuir model. As in the infrared spectrometry proved the characteristics of natural vermiculite. In the organic vermiculite was observed the appearance of characteristic bands of CH3, CH2, and (CH3)4N. Already on acid vermiculite, it was realized a partial destruction with decreasing intensity of the characteristic band of vermiculite that is between 1074 and 952 cm-1. In the SEM analysis, it was observed that there was partial destruction to the acid treatment and a cluster is noted between the blades caused by the presence of the surfactant. The TG shows that the higher mass loss occurs at the beginning of the heating caused by the elimination of water absorbed on the surface between layers. In the organic vermiculite also observed a loss of mass between 150 and 300 °C caused decomposition of the alkylammonium molecules (surfactants)

Acidez total titulável, pH e tempo de redução do azul de metileno no fluido ruminal de caprinos mantidos em pastagens artificiais, exclusiva de gramíneas, ou em caatinga

O objetivo deste trabalho foi o de determinar a concentração hidrogeniônica (pH), acidez total titulável e tempo de redução do azul de metileno no fluido ruminal de caprinos com ou sem raça definida, mantidos em pastagens artificiais, exclusivas de gramíneas, ou em caatinga, durante as épocas chuvosa e seca do ano. O delineamento experimental foi inteiramente casualizado, sendo analisado em esquema fatorial 2³ (animais com e sem raça definida, pastagens artificiais e em caatinga, épocas chuvosa e seca do ano). O tipo de pastagem influenciou significativamente (p < 0,05) os valores encontrados para acidez total titulável. em relação ao pH, o tipo de pastagem e época do ano foram significativamente (p < 0,05) os fatores mais incisivos. A atividade microbiana, avaliada através dos parâmetros estudados, foi mais intensa na época das águas e na caatinga em relação à da seca e pastagens artificiais, respectivamente. Na avaliação dos resultados desses testes, deve-se sempre levar em consideração principalmente a época do ano e o tipo de pastagem, sem, no entanto, desprezar o fator raça.

Azul de metileno no tratamento da síndrome vasoplégica em cirurgia cardíaca. quinze anos de perguntas, respostas, dúvidas e certezas

Objective: There is strong evidence that methylene blue (MB), an inhibitor of guanylate cyclase, is an excellent therapeutic option for vasoplegic syndrome (VS) treatment in heart surgery. The aim of this article is to review the MB's therapeutic function in the vasoplegic syndrome treatment. Methods: Fifteen years of literature review. Results: 1) Heparin and ACE inhibitors are risk factors; 2) In the recommended doses it is safe (the lethal dose is 40 mg/ kg); 3) The use of MB does not cause endothelial dysfunction; 4) The MB effect appears in cases of nitric oxide (NO) up-regulation; 5) MB is not a vasoconstrictor, by blocking of the GMPc system it releases the AMPc system, facilitating the norepinephrine vasoconstrictor effect; 6) The most used dosage is 2 mg/kg as IV bolus followed by the same continuous infusion because plasmatic concentrations strongly decays in the first 40 minutes; 7) There is a possible window of opportunity for the MB's effectiveness. Conclusions: Although there are no definitive multicentric studies, the MB used to treat heart surgery VS, at the present time, is the best, safest and cheapest option, being a Brazilian contribution for the heart surgery.

Aplicação e contribuição da cromoendoscopia no trato digestório superior de cães, uilizando Lugol, Índigo Carmim e Azul de Metileno

Pós-graduação em Medicina Veterinária - FMVZ

Influência dos corantes Azul de Metileno a 2% e Rodamina B a 2% na determinação da capacidade seladora apical de diferentes cimentos endodônticos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Terapia fotodinâmica em esporos de bacillus atrophaeus e bacillus subtilis: estudos com LASER, LED, azul de metileno, rosa bengala e verde malaquita

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aspectos clínicos-laboratoriais do uso do azul de metileno na obstrução experimental do jejuno em equinos expostos ao lipopolissacarídeo (LPS)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeitos da infusão de azul de metileno em equinos após a administração de lipopolissacarídeo

Pós-graduação em Cirurgia Veterinária - FCAV

Oxidação da hemoglobina como modelo de estudo do sistema de óxido-redução eritrocitário: interação entre nitrito de sódio, azul de metileno e cistamina

Pós-graduação em Fisiopatologia em Clínica Médica - FMB

Avaliação do PH e da densidade óptica do corante azul de metileno tamponado e não tamponado após o contato com diferentes cimentos endodônticos

O objetivo deste trabalho foi avaliar o pH e a densidade óptica das soluções de azul de metileno a 1% e 2% (tamponadas e não tamponadas) após a imersão de três cimentos endodônticos. Foram preparados oitenta espécimes de cada cimento endodôntico (Endofill, AH Plus e Sealapex), os quais foram imersos nas soluções corantes. As soluções foram analisadas antes e após a imersão dos materiais nos períodos de tempo de 0, 24, 48 e 72h. Foram realizadas avaliações do pH utilizando um pHmetro e da densidade óptica utilizando um espectofotômetro ajustado em 596nm. Os dados de pH foram analisados através de estatística descritiva e os dados da densidade óptica foram analisados pela ANOVA e teste de Tukey 5%. Pôde-se verificar que as soluções corantes de azul de metileno tamponadas e não tamponadas apresentaram pequena variação nos valores de pH e densidade óptica antes do contato com os cimentos endodônticos. As soluções corantes não tamponadas apresentaram valores de pH menores que as tamponadas, independentemente do contato com qualquer cimento endodôntico. Os cimentos endodônticos promoveram alterações nos valores de pH das soluções corantes, sendo que as maiores alterações ocorreram nas soluções não tamponadas. Ocorreram alterações nos valores da densidade óptica das soluções corantes tamponadas e não tamponadas nos diferentes períodos de tempo de análise, sendo diferentes para cada cimento endodôntico utilizado

Estudo fotodinâmico da clorofila a, azul de metileno e rosa bengala como agente inseticida contra Aedes aegypti

Photodynamic therapy, term introduced by von Tapeiner in 1900, can be defined as the administration of a non toxic drug, i.e., a dye, known as photosensitizer (FS), which subsequently will be illuminated with light of specific wavelength. PDT is based on the interaction among FS, oxygen and light, which through photochemical reactions cause cell death. The FS molecules must have a high probability to form the singlet state after the excitation, which can induce chemical changes in the neighborhood in two ways, called reactions type I and type II. The type II reaction is based on the exchange of energy to molecular oxygen, exciting it to its state of higher energy (singlet), which is highly reactive. The proposed mechanisms for cell death are linked to damage to the DNA, mitochondria and to the cytoplasmic membrane. Several pre‐clinical and clinical trials have been carried out and the PDT is already used in many countries for treatment mainly against certain types of cancer. The therapy also has been gaining strength in antimicrobial control, since the microorganisms have appeared increasingly resistant to current antibiotics. Another attempt to use the PDT is for the inactivation of macro‐organisms, such as micro‐crustaceans and mosquitoes. To this end I tested whether the photosensitizers methylene blue, rose Bengal and the chlorophyll a has insecticidal activity against the yellow fever and dengue vector mosquito, Aedes aegypti. Since these diseases have no effective treatments, its control is linked to the vector control, which has shown resistance to chemical pesticides used. Based on this, this work shows its importance, because it is a new type of mosquito control since all the photosensitizers used are low cost, do not generate toxic products at the concentrations used and showed good results in mortality. The best photosensitizer was rose Bengal... (Complete abstract click electronic access below)

Avaliação do tratamento eletroquímico (direto e indireto) como alternativa de degradação do corante azul de metileno

Textile industry has been a cause of environmental pollution, mainly due to the generation of large volumes of waste containing high organic loading and intense color. In this context, this study evaluated the electrochemical degradation of synthetic effluents from textile industry containing Methylene Blue (AM) dye, using Ti/IrO2-Ta2O5 and Ti/Pt anodes, by direct and indirect (active chlorine) electrooxidation. We evaluated the influence of applied current density (20, 40 and 60 mA/cm2 ), and the presence of different concentrations of electrolyte (NaCl and Na2SO4), as well as the neutral and alkaline pH media. The electrochemical treatment was conducted in a continuous flow reactor, in which the electrolysis time of the AM 100 ppm was 6 hours. The performance of electrochemical process was evaluated by UV-vis spectrophotometry, chemical oxygen demand (COD) and total organic carbon (TOC). The results showed that with increasing current density, it was possible to obtain 100 % of color removal at Ti/IrO2-Ta2O5 and Ti/Pt electrodes. Regarding the color removal efficiency, increasing the concentration of electrolyte promotes a higher percentage of removal using 0,02 M Na2SO4 and 0,017 M NaCl. Concerning to the aqueous medium, the best color removal results were obtained in alkaline medium using Ti/Pt. In terms of organic matter, 86 % was achieved in neutral pH medium for Ti/Pt; while a 30 % in an alkaline medium. To understand the electrochemical behavior due to the oxygen evolution reaction, polarization curves were registered, determining that the presence of NaCl in the solution favored the production of active chlorine species. The best results in energy consumption and cost were obtained by applying lower current density (20 mA/cm2 ) in 6 hours of electrolysis.

Desenvolvimento e caracterização de micropartículas de amido reticuladas com agente fosfatado e avaliação da adsorção do azul de metileno

Starch has properties that make it one of the most studied biopolymers today. It is biodegradable, biocompatible, stable and non-toxic. This work has synthesis of starch and tapioca microparticles, through chemical modification by crosslinking with sodium tripolyphosphate agent in concentrations 7.5 and 15% (m / m). The amylose content was measured for starch and commercial cassava starch at 21.8% and 28.6%, respectively. According to the solubility index, processing in basic medium does not change the solubility of the material, but the addition of crosslinking agent increases this index, which changed from 12.8% for the control unprocessed, to 22.4% for the A5R15 sample. Soluble starch-based materials had a significant increase in the crosslinking density by increasing the concentration of crosslinker, from 1.4 in A5R7,5 sample, to 1.9 in A5R15. The cassava starch-based materials exhibited an opposite behavior: to increase the concentration of crosslinker crosslinking density decreased significantly in F5R7.5 from 2.9, to 1.9 in F5R15 sample. The point of zero charge (PZC) shows that below pH 4 the surface is positively charged. The surface area data is between 3,04 and 1,15 m2.g-1. The pore volume between 2.94 and 1.33 cm3.g-1 and pore size around 1.5 nm. The SEM indicates uneven distribution of microparticles, which are smooth, with no ridges. The maximum adsorption capacity of the materials were tested at pH 7.7 and for A5R15 and CA sample, at pH 2, 5, 6 and 9. It is noted that the processing in basic medium reduces the adsorption capacity of CA and CF in respect fo A and F. The adsorption in A5R15 sample has great dependency on the pH, reaching a value of 587 μg.g-1 in pH 7.7. The samples A5R15 and F5R7,5 adsorbed similar amounts, according to the statistical analysis, and significantly higher than their respective controls and showed lower desorption, indicating that the modification process was effective to control the release of methylene blue. The infrared spectra not show the characteristic bands of the phosphate bonds to the material formed, however, developments in hydroxyl characteristic band suggest modification in the way this group was linked after the reaction. After adsorption, the infrared spectra show different format in the band of hydroxyl. PCA analysis shows that the greatest changes observed in the IR spectra are observed in the region of 3500 cm-1. Thermal analysis showed three thermal events related to dehydration and material degradation. It is observed that the processing increases the temperature to the first mass loss, fixed at 12%, but not observed increased stability due to the presence of crosslinker or process.