Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester

Annular, ring or torsional shear testers are commonly used in bulk solids handling research for the purpose of powder characterisation or equipment design. This paper reports from a DEFRA sponsored project which aims to develop an industrial powder flow-ability tester, (based on the annular shear tester) that is economic to buy and quick and easy to use in trained but unskilled hands. This paper compares the wall failure loci measured with an annular shear cell with measurements obtained using the accepted standard wall friction tester, the Jenike shear cell. These wall failure loci have been measured for several bulk solids which range from fine cohesive powders to free-flowing granular materials, on a stainless steel 304 2B wall surface.

Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester

The firm adhesion of flavouring particles onto crisp surfaces during coating processes is a major concern in the snack production industry. Detachment of flavouring powders from products during handling and production stages can lead to substantial financial losses for the industry, in terms of variable flavour performance and extended cleaning down time of fugitive particle build-up on process equipment. Understanding the adhesion strength of applied bulk particulates used for flavouring formulations will help analysts to evaluate the efficiency of coating processes and potentially enable them to assess the adhesion strength of newly formulated flavouring powder prior to commitment to full scale plant trials. A rapid prototype of a novel adhesion tester has been designed and constructed. The apparatus operates according to the principle of impact force acting on particles attached to the surface of the food substrate. The main component is a circular plate to which four sample holders are attached and which is subjected to vertical travel down a guide shaft. Several flavouring powders have been tested extensively. By plotting the detachment versus impact force, the difference obtained between adhesion strength of different flavouring powders (which is a strong function of particle size) has been discussed.

L'utilisation du bootstrap pour tester la stationnarité des taux de change réels avec un modèle non linéaire. L'évidence pour le Canada.

Rapport de recherche

L'émergence des limites à la liberté de tester en droit québécois : étude socio-juridique de la production du droit

"Thèse présentée à la Faculté des études supérieures en vue de l'obtention du grade de docteur en droit (LL.D.)". Cette thèse a été acceptée à l'unanimité et classée parmi les 10% des thèses de la discipline.

Front End Evaluation of 'Tester' Exhibition to be Developed into a Travelling Sports Exhibition

The purpose of this evaluation is to develop a framework that will help in planning and implementing the mobile sport exhibition, increase visitor satisfaction and aid At Bristol in building successful exhibits. The evaluation mainly focuses on visitor interaction with exhibits. It is believed that learning does occur in science centres and museums. The evaluation will therefore find out if learning occurs in the Sports exhibition and if so, the nature of the learning outcomes. The evaluation also discusses advantages and disadvantages of travelling exhibitions and identifies the characteristics of good exhibits that form the basis of the framework.From the results, an indication is that children make the larger proportion of visitors to Sportastic. Their age ranges, under 10 and 10 to 15 years constituted 21% and 30% respectively. The three most enjoyed exhibits are the Sprint Challenge (running), BATAK (test your reaction and Hot Shots (football). Visitors say these exhibits are enjoyed because they are fun, competitive, entertaining, interactive and hands-on. Skateboard Challenge and Skeleton Bob are among the exhibits least enjoyed since they are reported to be boring and uncomfortable to use. The learning outcomes from the exhibits are; increased knowledge about balancing, reaction, pulse and strength.

Electro-hydraulic actuator tester for fly-by-wire aircrafts

An 8051-based microcontroller tester has been designed to reduce troubleshooting time of the Electro-Hydraulic Actuators (EHA) installed in fly-by-wire aircrafts. The tester algorithm first evaluates EHA pressure and position sensor signals to emit either a pass or fail message. The evaluation is based on predefined ranges of EHA pressure and position signals. Next, the instrument tests the EHA response capability - a way of dynamic response evaluation, again issuing a suitable response. The instrument proved to be reliable after being successfully evaluated in laboratory and in a real model test airplane. © 2007 IEEE.

Portable Hardness tester for timber classification

Hardness is a property largely used in material specifications, mechanical and metallurgical research and quality control of several materials. Specifically for timber, Janka hardness is a simple, quick and easy test, with good correlations with the compression parallel to grain strength, a strong reference in structural classification for this material. More recently, international studies have reported the use of Brinell hardness for timber assessment which resumes the advantages previously mentioned for Janka hardness and make it easier to be performed in the field, especially because of the lower magnitude of the involved loads. A first generation of an equipment for field evaluation of hardness in wood - Portable Hardness tester for wood - based on Brinell hardness has already been developed by the Research Group on Forest Products from FCA/UNESP, Brazil, with very good correlations between the evaluated hardness and several other mechanical properties of the material when performing tests with different species of native and reforested wood (traditionally used as ties - sleepers - in railways). This paper presents results obtained in the experimental program with the first generation of this equipment and preliminary tests with its second generation, which uses accelerometers to substitute the indentation measurements in wood. For the first generation of the equipment functional and calibration tests were carried out using 16 native and reforestation timber lots, among there E. citriodora, E. tereticornis, E. saligna, E. urophylla, E. grandis, Goupia glabra and Bagassa guianenses, with different origins and ages. The results obtained confirm its potential in the classification of specimens, with inclusion errors varying from 4.5% to 16.6%.

Estimating hardness of eucalyptus wood with a portable hardness tester

More than 80% of the 29600 km of the Brazilian railroad mesh employs wooden sleepers. The problem of hard availability of native wood for this purpose leads to the alternative use of reforestation species to produce sleepers. Considering the great difficulty to, in field condition, evaluate characteristics that are of major importance to define its suitability to sleeper production the Research Group on Forest Products from FCA/UNESP - Brazil had developed equipment for field evaluation of hardness in wood - Portable Hardness Tester. This paper reports the functional validation tests, performed with different species of Eucalyptus. Results revealed the equipment great functionality, easy-to-use characteristics and applicability to Eucalyptus wood. Moderate to strong relationships between laboratory and validated values of hardness were found. The best validation model was obtained using the data provided by the experimental dispositive 3 (R2=0.74 and SSE= 7.71 kJ/m2) while the experimental dispositive 1 gave the worse validation (R2=0.55 and SSE= 13.46 kJ/m2).

Evaluation of Hunter heavy duty plate brake tester. Interim final report.

National Highway Traffic Safety Administration, Washington, D.C.

Breath-alcohol testing: disposable breath tester. Part I. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

A reverse-bias safe operating area transistor tester /

Includes bibliographical references (p. 14).

An evaluation of the trainer-tester and punchboard tutor as electronics trouble-shooting training aids,

Mode of access: Internet.