908 resultados para aquecimento solar
Resumo:
Alguns microrganismos fitopatogênicos podem ser transportados pela água, que se constitui em importante e eficiente forma de disseminação. O controle de fitopatógenos pelo tratamento térmico da água infestada, utilizando a energia solar, constituiu o objetivo do trabalho. Quantificou-se a eficiência de um sistema automatizado de aquecimento solar desenvolvido para esta finalidade, baseado em processo misto de aquecimento da água em circuito fechado, com coletores planos e transmissão de calor por convecção natural e forçada. A automatização e a equalização da temperatura foram obtidas por termostatos localizados em diferentes pontos. Verificou-se boa eficiência do equipamento, trabalhando na temperatura de 60 ºC, tanto em rendimento de água processada como na eliminação do inóculo de fitopatógenos de importância econômica, como Botrytis cinerea, Colletotrichum spp., Fusarium spp., Pythium spp., Verticillium dahliae e Rhizoctonia solani. À exceção de F. oxysporum f. sp. phaseoli, os patógenos testados não sobreviveram ao tratamento térmico a temperaturas acima de 55 0C. A técnica mostrou-se promissora como uma opção na desinfestação da água para uso em irrigação de viveiros, casas de vegetação e diversas finalidades em pequenas ou médias propriedades agrícolas.
Influência da vazão de água sobre o rendimento de um coletor solar plano construído em termoplástico
Resumo:
ResumoAvaliou-se o rendimento térmico de um coletor solar plano construído em termoplástico, em condições reais de operação, registrando as temperaturas de entrada e de saída de água na placa, mediante quatro distintas vazões mássicas de água: 0,026 kg s-1; 0,04 kg s-1; 0,054 kg s-1; e 0,068 kg s-1. Os ensaios foram realizados no Laboratório de Termodinâmica e Energia da Faculdade de Engenharia Agrícola da Unicamp. Com base nos valores de temperatura da água na entrada e na saída das placas, foram calculados os valores de potência térmica [W m-2]. O maior valor médio diário de potência térmica (753 W m-2) foi obtido para a vazão de 0,054 kg s-1. Para a maior vazão (0,068 kg s-1), o valor de potência térmica foi similar ao obtido para a vazão de 0,04 kg s-1 (715 W m-2), mostrando a existência de uma vazão ótima de operação.
Resumo:
É muito difícil falar sobre aquecimento de água usando energia solar, sem falar em energia de apoio, ou auxiliar. Essa indispensável energia auxiliar, que pode ser eletricidade, gás ou um outro combustível qualquer, tem por objetivo substituir a energia solar nos dias nublados, ou complementá-la nos períodos de baixa radiação solar. Sua finalidade é manter um certo volume de água quente dentro das condições mínimas de temperatura para uso imediato. Essa energia, tão importante para a eficácia do sistema, tem sempre um custo agregado que deve ser considerado no projeto. A escolha do tipo de energia auxiliar recai justamente sobre a eletricidade por sua facilidade de controle e baixo investimento inicial. O custo da energia elétrica, contudo, é hoje alto o suficiente para que a fração elétrica no consumo de energia do sistema seja importante e passe a merecer mais atenção. Esta dissertação visa a estudar estratégias para minimizar o consumo de energia elétrica auxiliar. O trabalho foi desenvolvido através da simulação do atendimento de uma residência unifamiliar, habitada por cinco pessoas, com um consumo de água quente variável ao longo do dia e igual para todos os dias do ano. Empregou-se para as simulações de todos os casos estudados, o software TRNSYS em sua versão 14.2, (KLEIN, 1997) que demonstrou eficácia e coerência nos resultados obtidos Ao longo do trabalho foram simulados mais de setecentos casos, variando-se parâmetros como área de coletores, volume do reservatório, potência elétrica, dentre outros. Com os resultados obtidos nas simulações foram elaboradas tabelas e gráficos dos quais foi possível retirar algumas conclusões relevantes tais como a dependência do consumo de energia auxiliar com o volume do reservatório, número de coletores, potência da resistência de aquecimento e sua altura, bem como a altura do termostato. A partir dos resultados deste trabalho foi possível a elaboração de uma série de recomendações relativas a estudo e a projeto de sistemas de aquecimento solar de água quente para uso doméstico, visando à otimização na utilização do sistema de energia auxiliar.
Resumo:
The technical and economic viability of solar heating for swimming pools is unquestionable, besides there it replaces the high costs and environmental impacts of conventional supply of energy, and it improves an optimization in the pool heating uses. This work applies the principles of the greenhouse effect: advanced thermodynamics, heat retention and equalization of temperature, to optimize the solar heating equipment, reducing the area required by collectors as much as 40% (still estimated value) for commercial collectors, with minor architectural and aesthetic impacts on the environment. It features a solar heating alternative in pools, whose main characteristics: low cost, simplicity in manufacturing and assembly and a faster heating. The system consists of two collectors spiral hoses made of polyethylene with a hundred meters each, and working on a forced flow, with only one pass of the working fluid inside the coils, and is used to pump itself treatment of pool water to obtain the desired flow. One of the collectors will be exposed to direct solar radiation, and the other will be covered by a glass slide and closed laterally, so providing the greenhouse effect. The equipment will be installed in parallel and simultaneously exposed to the sun in order to obtain comparative data on their effectiveness. Will be presented results of thermal tests for this the two cases, with and without transparent cover. Will be demonstrated, by comparison, the thermal, economic and material feasibility of these systems for heating swimming pools.
Resumo:
The oil industry, experiencing a great economic and environmental impact, has increasingly invested in researches aiming a more satisfactory treatment of its largest effluent, i.e., produced water. These are mostly discarded at sea, without reuse and after a basic treatment. Such effluent contains a range of organic compounds with high toxicity and are difficult to remove, such as polycyclic aromatic hydrocarbons, salts, heavy metals, etc.. The main objective of this work was to study the solar distillation of produced water pre-treated to remove salts and other contaminants trough of a hybrid system with a pre-heater. This developed apparatus was called solar system, which consists of a solar heater and a conventional distillation solar still. The first device consisted of a water tank, a solar flat plate collector and a thermal reservoir. The solar distillator is of simple effect, with 1m2 of flat area and 20° of inclination. This dissertation was divided in five steps: measurements in the solar system, i.e. temperatures and distillate flow rate and weather data; modeling and simulation of the system; study of vapor-liquid equilibrium of the synthetic wastewater by the aqueous solution of p-xylene; physical and chemical analyses of samples of the feed, distillate and residue, as well as climatology pertinent variables of Natal-RN. The solar system was tested separately, with the supply water, aqueous NaCl and synthetic oil produced water. Temperature measurements were taken every minute of the thermal reservoir, water tank and distillator (liquid and vapor phases). Data of solar radiation and rainfall were obtained from INPE (National Institute for Space Research). The solar pre-heater demonstrated to be effective for the liquid systems tested. The reservoir fluid had an average temperature of 58°C, which enabled the feed to be pre-heated in the distillator. The temperature profile in the solar distillator showed a similar behavior to daily solar radiation, with temperatures near 70°C. The distillation had an average yield of 2.4 L /day, i.e., an efficiency of 27.2%. Mathematical modeling aided the identification of the most important variables and parameters in the solar system. The study of the vapor-liquid equilibrium from Total Organic Carbon (TOC) analysis indicated heteroazeotropia and the vapor phase resulted more concentrated in p-xylene. The physical-chemical analysis of pH, conductivity, Total Dissolved Solids (TDS), chlorides, cations (including heavy metals) and anions, the effluent distillate showed satisfactory results, which presents a potential for reuse. The climatological study indicates the region of Natal-RN as favorable to the operation of solar systems, but the use of auxiliary heating during periods of higher rainfall and cloud cover is also recommended
Resumo:
Pós-graduação em Agronomia (Energia na Agricultura) - FCA
Resumo:
Pós-graduação em Engenharia Mecânica - FEB
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Engenharia Mecânica - FEG
Resumo:
Solar heaters are an appropriate technology in tropical and sub-tropical climates to heat bath water by solar energy. Low-cost solar heaters meet the demand of low-income rural communities which currently do not have access to this technology. Current research analyzes the economic viability of solar heaters, built with recyclable materials, to reduce electric energy bill. A solar heating system was built consisting of recyclable materials in accordance with the manuals provided by the Secretariat of Environment of the state of Paraná (SEMA). Duration of use of electric showers by families of rural properties was determined to calculate expenses and billing of electricity. Simulation and material costs showed that the system was feasible. Commercial solar heaters could be replaced at a cost of R$ 22.61 per month during 13 months.
Resumo:
Face aos padrões atuais de vida, em que despendemos a maior parte do nosso tempo no interior de edifícios, com um nível de conforto que ninguém quer abdicar, urge o desenvolvimento de tecnologias de climatização sustentáveis. Devido a uma combinação única de fatores, casas de baixo consumo de energia (e também casas passivas) em Portugal, são particularmente adequadas de explorar as vantagens da energia solar térmica, especialmente quando combinado com armazenamento sazonal de energia. No entanto nenhum exemplo documentado existe de como esta sinergia pode ser explorada com sucesso em Portugal, ilustrando assim o modo em que a necessidade de aquecimento pode ser colmatada de uma forma sustentável sem o uso de combustíveis fósseis. A energia solar é uma excelente alternativa de fonte de energia para aquecimento de edifícios. Um principal fator que limita a sua aplicação é que é uma fonte de energia com uma disponibilidade média de variação cíclica. O uso de armazenamento sazonal de energia pode reduzir substancialmente o custo do sistema solar que é capaz de fornecer até 100% das necessidades energéticas dos edifícios. Estes sistemas são projetados para armazenar a energia solar durante o verão e reter o calor armazenado para posterior utilização durante o inverno; Abstract: SEASONAL SOLAR THERMAL ENERGY STORAGE FOR LOW TEMPERATURE HEATING BUILDINGS. Given the current standards of living, where we spent most of our time inside buildings, with a level of Comfort that no one wants to give up, urges the development of sustainable climate control technologies. Due to a unique combination of factors, low energy (and also passive) houses in Portugal are particularly well suited to exploiting the advantages of solar thermal energy especially when combined with seasonal energy storage. However no documented example there of how this synergy can be exploited successfully in Portugal, illustrating the way in which the need for heating can be addressed in a sustainable manner without the use of fossil fuels. Solar energy is an important alternative energy source for heating applications. One main factor that limits its application is that it is an energy source with an average availability of cyclical variation. The use of seasonal thermal energy storage can substantially reduce the cost of solar energy systems that can supply up to 100% of buildings energy needs. Such systems are designed to collect solar energy during the summer and retain the stored heat for use during the winter.
Resumo:
Neste trabalho, analisou-se a viabilidade do uso de concentradores de radiação solar em sistemas fototérmicos para higienização de salas de ordenha. Foram analisadas três opções para aquecimento de água com reservatório de acumulação: sistema com resistência elétrica, sistema solar com concentrador e sistema solar sem concentrador. Calculou-se o custo total dessas alternativas e o valor presente líquido do sistema solar suplementado por lenha de eucalipto comprada, lenha de eucalipto produzida na propriedade rural, energia elétrica e gás liquefeito de petróleo (GLP). Realizou-se uma análise de sensibilidade do sistema fototérmico variando o número de vacas lactantes, o custo da energia elétrica e da lenha, a taxa de juros, o custo dos componentes do sistema, a vida útil e o subsídio no valor do equipamento. O sistema fototérmico com concentrador suplementado por lenha produzida na propriedade foi a alternativa de aquecimento mais viável economicamente. O uso dos concentradores gera uma redução de cerca de 10% no custo de aquisição do sistema de aquecimento solar.
Resumo:
A solar alternative system for water heating is presented. It work on a thermosiphon, consisting of one or two alternative collectors and a water storage tank also alternative, whose main purpose is to socialize the use of energy mainly to be used by people of low income. The collectors were built from the use of pets bottles, cans of beer and soft drinks and tubes of PVC, ½ " and the thermal reservoirs from a drum of polyethylene used for storage of water and garbage placed inside cylinder of fiber glass and EPS ground between the two surfaces. Such collectors are formed by three elements: pet bottles, cans and tubes absorbers. The heating units, which form the collector contains inside the cans that can be closed, in original form or in the form of plate. The collectors have an absorber grid formed by eight absorbers PVC tube, connected through connections at T of the same material and diameter. It will be presented data of the thermal parameters which demonstrate the efficiency of the heating system proposed. Relative aspects will be boarded also the susceptibility the thermal degradation and for UV for the PVC tubes. It will be demonstrated that this alternative heating system, which has as its main feature low cost, presents thermal, economic and materials viabilities
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)