Qualidade de vida dos indivíduos com patologia cardíaca : impacto de um programa de reabilitação

Introdução: A doença cardiovascular é uma das principais causas de incapacidade e diminuição da qualidade de vida. O grande investimento na atuação preventiva ou de reabilitação impõe um apelo especial à conjugação de esforços por parte de todos os interlocutores. Neste contexto, o objetivo do presente estudo centrou-se em avaliar o impacto de um Programa de Reabilitação na qualidade de vida e outros indicadores de saúde em indivíduos que possuam doença cardíaca, analisando a influência das variáveis sociodemográficas, antropométricas, clínicas, de qualidade de vida e de atividade física. Método: Recorrendo a um estudo de natureza quantitativa, do tipo prospetivo com características pré-experimentais, inquirimos 48 indivíduos portadores de patologia cardíaca, na sua maioria do género masculino (75%), com idades compreendidas entre os 26 e 87 anos (M= 57.90; Dp= 12.23), casados (81.2%), reformados (45,8%), com fatores de risco cardiovascular (87.5%), que se encontram com algum grau de limitação física para atividades quotidianas. O protocolo de pesquisa inclui, além de uma ficha sociodemográfica e clínica, instrumentos de medida aferidos e validados para a população portuguesa (Qualidade de Vida e Índice de Atividade Física), os quais foram aplicados antes e após a Fase II do Programa de Reabilitação Cardíaca, Resultados: Após implementação do Programa de Reabilitação Cardíaca, os resultados evidenciam uma melhoria estatisticamente significativa nos dados antropométricos (peso, IMC e PA), nas características analíticas (CT, LDL, TG, HDL e glicemia), nos dados hemodinâmicos (PAS, PAD, FE%), na prova de esforço (METs e %FC) e ainda na qualidade de vida (nos seus domínios emocional, físico, social e global) e no índice de atividade física (vigorosa, moderada, caminhada, METs e tempo sentado). Conclusão: A evidência dos resultados obtidos dá corpo à importância duma abordagem multidisciplinar nos programas de reabilitação cardíaca, realçando a necessidade de aumentar a taxa de referenciação para os centros existentes e a necessidade de criar novos centros, de forma a se poderem proporcionar cuidados considerados essenciais na recuperação pós-evento agudo e na prevenção da doença cardiovascular e cardíaca em geral. Palavras-Chave: Reabilitação Cardíaca; Qualidade de Vida; Fatores de Risco Cardiovascular.

Qualitative Characteristics and Quantitative Measures of Solution's Reliability in Discrete Optimization: Traditional Analytical Approaches, Innovative Computational Methods and Applicability

The purpose of this thesis is twofold. The first and major part is devoted to sensitivity analysis of various discrete optimization problems while the second part addresses methods applied for calculating measures of solution stability and solving multicriteria discrete optimization problems. Despite numerous approaches to stability analysis of discrete optimization problems two major directions can be single out: quantitative and qualitative. Qualitative sensitivity analysis is conducted for multicriteria discrete optimization problems with minisum, minimax and minimin partial criteria. The main results obtained here are necessary and sufficient conditions for different stability types of optimal solutions (or a set of optimal solutions) of the considered problems. Within the framework of quantitative direction various measures of solution stability are investigated. A formula for a quantitative characteristic called stability radius is obtained for the generalized equilibrium situation invariant to changes of game parameters in the case of the H¨older metric. Quality of the problem solution can also be described in terms of robustness analysis. In this work the concepts of accuracy and robustness tolerances are presented for a strategic game with a finite number of players where initial coefficients (costs) of linear payoff functions are subject to perturbations. Investigation of stability radius also aims to devise methods for its calculation. A new metaheuristic approach is derived for calculation of stability radius of an optimal solution to the shortest path problem. The main advantage of the developed method is that it can be potentially applicable for calculating stability radii of NP-hard problems. The last chapter of the thesis focuses on deriving innovative methods based on interactive optimization approach for solving multicriteria combinatorial optimization problems. The key idea of the proposed approach is to utilize a parameterized achievement scalarizing function for solution calculation and to direct interactive procedure by changing weighting coefficients of this function. In order to illustrate the introduced ideas a decision making process is simulated for three objective median location problem. The concepts, models, and ideas collected and analyzed in this thesis create a good and relevant grounds for developing more complicated and integrated models of postoptimal analysis and solving the most computationally challenging problems related to it.

Orbifloxacin: A Review of Properties, Its Antibacterial Activities, Pharmacokinetic/Pharmacodynamic Characteristics, Therapeutic Use, and Analytical Methods

Orbifloxacin is a third generation of fluoroquinolone that exhibits increased antibacterial activity against the Enterobacteriaceae, gram-negative and gram-positive bacteria, anaerobes, and mycobacteria. This drug was synthesized in 1987 and developed as a veterinary chemotherapeutic to use for livestock and domestic pets. Orbifloxacin is labeled for the treatment of skin, soft tissue, and urinary tract infections in dogs, and skin and soft tissue infections in cats, but in some countries, orbifloxacin has been given for the treatment of gastrointestinal and respiratory infections in cattle and swine and other animals. The in vitro activity and clinical efficacy of orbifloxacin against naturally occurring bacterial infections of the skin, ear, soft tissue, udder, and gastrointestinal and respiratory systems in different animals have been evaluated and good responses have been found. The minimum inhibitory concentration of orbifloxacin has been determined in various different pathogens and the results found in the literature are shown in this work. The pharmacokinetics of orbifloxacin has been evaluated by different routes of administration in goats, horses, pigs, rabbits, dogs, cats, camels, cattle, sheep, and fish. Orbifloxacin exhibits excellent pharmacokinetic parameters that suggest that this drug may have good clinical effects on various bacterial infections in these species. All methods described in the scientific literature for determination of orbifloxacin in different matrices were collected and discussed. © 2013 Copyright Taylor and Francis Group, LLC.

Characteristics, complexation and analytical methods of darunavir

What is it? Darunavir is a protease inhibitor used in the treatment of HIV infection. It is an important drug of therapy cocktail for patients infected with the virus. On the market there are darunavir ethanolate tablets of 75, 150, 300, 400, 600 and 800mg, because this is the most stable form. It is commercialized by Janssen-Cilag with the name PrezistaTM. Why we started? This drug has low water solubility and poor bioavailability, therefore requires administration in doses relatively high to the success of the therapeutic effect. The complexation of drugs by using cyclodextrin is welcome in this respect to improve the solubility and hence increase the dissolution rate of poorly soluble drugs. A monograph about this compound has not been described, thus it is an extremely important quality control of darunavir to demonstrate its effectiveness and safety. What we did? Some existing analytical techniques have been discussed in this manuscript, focusing on bioanalytical and pharmaceutical quality control applications. What we found? This review showed the published analytical methods reported for the determination of darunavir and discuss about its characteristics and complexation with cyclodextrin.

Contribution to dynamic characteristics of the cutting temperature in the drilling process considering one dimension heat flow

The machining of hardened steels has always been a great challenge in metal cutting, particularly for drilling operations. Generally, drilling is the machining process that is most difficult to cool due to the tool`s geometry. The aim of this work is to determine the heat flux and the coefficient of convection in drilling using the inverse heat conduction method. Temperature was assessed during the drilling of hardened AISI H13 steel using the embedded thermocouple technique. Dry machining and two cooling/lubrication systems were used, and thermocouples were fixed at distances very close to the hole`s wall. Tests were replicated for each condition, and were carried out with new and worn drills. An analytical heat conduction model was used to calculate the temperature at tool-workpiece interface and to define the heat flux and the coefficient of convection. In all tests using new and worn out drills, the lowest temperatures and decrease of heat flux were observed using the flooded system, followed by the MQL, considering the dry condition as reference. The decrease of temperature was directly proportional to the amount of lubricant applied and was significant in the MQL system when compared to dry cutting. (C) 2011 Elsevier Ltd. All rights reserved.

Thermal and mechanical characteristics of polyurethane/curaua fiber composites

Polyurethane composites reinforced with curaua fiber at 5, 10 and 20% mass/mass proportions were prepared by using the conventional melt-mixing method. The influence of curaua fibers on the thermal behavior and polymer cohesiveness in polyurethane matrix was evaluated by dynamic mechanical thermal analysis (DMTA) and by differential scanning calorimetry (DSC). This specific interaction between the fibers and the hard segment domain was influenced by the behavior of the storage modulus E` and the loss modulus EaEuro(3) curves. The polyurethane PU80 is much stiffer and resistant than the other composites at low temperatures up to 70A degrees C. All samples were thermoplastic and presented a rubbery plateau over a wide temperature range above the glass transition temperature and a thermoplastic flow around 170A degrees C.

Analytical solution to the zero-inertia problem for surge flow phenomena in nonprismatic channels

Surge flow phenomena. e.g.. as a consequence of a dam failure or a flash flood, represent free boundary problems. ne extending computational domain together with the discontinuities involved renders their numerical solution a cumbersome procedure. This contribution proposes an analytical solution to the problem, It is based on the slightly modified zero-inertia (ZI) differential equations for nonprismatic channels and uses exclusively physical parameters. Employing the concept of a momentum-representative cross section of the moving water body together with a specific relationship for describing the cross sectional geometry leads, after considerable mathematical calculus. to the analytical solution. The hydrodynamic analytical model is free of numerical troubles, easy to run, computationally efficient. and fully satisfies the law of volume conservation. In a first test series, the hydrodynamic analytical ZI model compares very favorably with a full hydrodynamic numerical model in respect to published results of surge flow simulations in different types of prismatic channels. In order to extend these considerations to natural rivers, the accuracy of the analytical model in describing an irregular cross section is investigated and tested successfully. A sensitivity and error analysis reveals the important impact of the hydraulic radius on the velocity of the surge, and this underlines the importance of an adequate description of the topography, The new approach is finally applied to simulate a surge propagating down the irregularly shaped Isar Valley in the Bavarian Alps after a hypothetical dam failure. The straightforward and fully stable computation of the flood hydrograph along the Isar Valley clearly reflects the impact of the strongly varying topographic characteristics on the How phenomenon. Apart from treating surge flow phenomena as a whole, the analytical solution also offers a rigorous alternative to both (a) the approximate Whitham solution, for generating initial values, and (b) the rough volume balance techniques used to model the wave tip in numerical surge flow computations.

Analysis of acousto-ultrasonic characteristics for contact-type transducers coupled to composite laminated plates

The acousto-ultrasonic (AU) input-output characteristics for contact-type transmitting and receiving transducers coupled to composite laminated plates are considered in this paper. Combining a multiple integral transform method, an ordinary discrete layer theory for the laminates and some simplifying assumptions for the electro-mechanical transduction behaviour of the transducers, an analytical solution is developed which can deal with all the wave processes involved in the AU measurement system, i.e, wave generation, wave propagation and wave reception. The spectral response of the normal contact pressure sensed by the receiving transducer due to an arbitrary input pulse excited by the transmitting transducer is obtained. To validate the new analytical-numerical spectral technique in the low-frequency regime, the results are compared with Mindlin plate theory solutions. Based on the analytical results, numerical calculations are carried out to investigate the influence of various external parameters such as frequency content of the input pulse, transmitter/receiver spacing and transducer aperture on the output of the measurement system. The results show that the presented analytical-numerical procedure is an effective tool for understanding the input-output characteristics of the AU technique for laminated plates. (C) 2001 Elsevier Science Ltd. All rights reserved.

Comparação do cálculo de dose com os algoritmos Analytical Anisotropic Algorithm e Pencil Beam Convolution na patologia de pulmão

Mestrado em Radioterapia.

Early literacy development in Catalan: characteristics and instructional influence

Resumo: Este artigo analisa a relação entre o nível de consciência fonológica, conhecimento das letra e as estratégias utilizadas para ler e escrever, em crianças de cinco anos, ensinadas em catalão. Participaram 69 crianças de três classes diferentes. Cada um dos seus professores utilizava um método diferente de ensino: analítico, sintético ou analítico-sintético. As crianças foram avaliadas no início e no final do ano letivo em: Reconhecimento de letras, segmentação palavra oral, leitura de palavras, leitura de um texto curto e um ditado. Foram realizadas análises de granulação fina em nas respostas das crianças, para identificar estratégias e padrões específicos. A análise qualitativa indica que a capacidade de segmentar uma palavra em sílabas por via oral parece ser suficiente para as crianças começarem a ler de uma forma convencional. Além disso, a consciência fonológica e o conhecimento das letras são usados em formas relativamente diferentes, dependendo do tipo de texto a ser lido. As abordagens de ensino dos professores parecem ter uma influência nos resultados das crianças.

Characteristics of HIV patients who missed their scheduled appointments

ABSTRACT OBJECTIVE: To analyze whether sociodemographic characteristics, consultations and care in special services are associated with scheduled infectious diseases appointments missed by people living with HIV. METHODS: This cross-sectional and analytical study included 3,075 people living with HIV who had at least one scheduled appointment with an infectologist at a specialized health unit in 2007. A secondary data base from the Hospital Management & Information System was used. The outcome variable was missing a scheduled medical appointment. The independent variables were sex, age, appointments in specialized and available disciplines, hospitalizations at the Central Institute of the Clinical Hospital at the Faculdade de Medicina of the Universidade de São Paulo, antiretroviral treatment and change of infectologist. Crude and multiple association analysis were performed among the variables, with a statistical significance of p ≤ 0.05. RESULTS: More than a third (38.9%) of the patients missed at least one of their scheduled infectious diseases appointments; 70.0% of the patients were male. The rate of missed appointments was 13.9%, albeit with no observed association between sex and absences. Age was inversely associated to missed appointment. Not undertaking anti-retroviral treatment, having unscheduled infectious diseases consultations or social services care and being hospitalized at the Central Institute were directly associated to missed appointments. CONCLUSIONS: The Hospital Management & Information System proved to be a useful tool for developing indicators related to the quality of health care of people living with HIV. Other informational systems, which are often developed for administrative purposes, can also be useful for local and regional management and for evaluating the quality of care provided for patients living with HIV.

Response characteristics of arsenic-sensitive bioreporters expressing the gfp reporter gene

This paper describes the development of an analytical technique for arsenic analyses that is based on genetically-modified bioreporter bacteria bearing a gene encoding for the production of a green fluorescent protein (gfp). Upon exposure to arsenic (in the aqueous form of arsenite), the bioreporter production of the fluorescent reporter molecule is monitored spectroscopically. We compared the response measured as a function of time and concentration by steady-state fluorimetry (SSF) to that measured by epi-fluorescent microscopy (EFM). SSF is a bulk technique; as such it inherently yields less information, whereas EFM monitors the response of many individual cells simultaneously and data can be processed in terms of population averages or subpopulations. For the bioreporter strain used here, as well as for the literature we cite, the two techniques exhibit similar performance characteristics. The results presented here show that the EFM technique can compete with SSF and shows substantially more promise for future improvement; it is a matter of research interest to develop optimized methods of EFM image analysis and statistical data treatment. EFM is a conduit for understanding the dynamics of individual cell response vs. population response, which is not only a matter of research interest, but is also promising in the practical terms of developing micro-scale analysis.

Characteristics and origin of agates in sedimentary rocks from the Dryhead area, Montana, USA

Agates from the Bighorn district in Montana (USA), the so-called Dryhead area, and their adjacent host rocks have been examined in the present study. Analyses by XRD, polarizing microscopy, LA-ICP-MS, cathodoluminescence (CL), SEM and of oxygen isotopes were performed to obtain information surrounding the genesis of this agate type. Investigations of the agate microstructure by polarizing microscopy and CL showed that chalcedony layers and macrocrystalline quartz crystals may have formed by crystallization from the same silica source by a process of self-organization. High defect densities and internal structures (e. g. sector zoning) of quartz indicate that crystallization went rapidly under non-equilibrium conditions. Most trace-element contents in macrocrystalline quartz are less than in chalcedony due to a process of `self-purification', which also caused the formation of Fe oxide inclusions and spherules. Although the agates formed in sedimentary host rocks, analytical data indicate participation of hydrothermal fluids during agate formation. Trace elements (REE distribution patterns, U contents up to 70 ppm) and CL features of agate (transient blue CL), as well as associated minerals (fluorite, REE carbonates) point to the influence of hydrothermal processes on the genesis of the Dryhead agates. However, formation temperatures <120 degrees C were calculated from O-isotope compositions between 28.9 parts per thousand (quartz) and 32.2 parts per thousand (chalcedony).