Night-time continence care in Australian residential aged care facilities: findings from a grounded theory study

BACKGROUND: Continence care commonly disrupts sleep in residential aged care facilities, however, little is known about what staff do when providing continence care, and the factors that inform their practice. AIMS: To describe nurses' and personal careworkers' beliefs and experiences of providing continence care at night in residential aged care facilities. METHODS/DESIGN: Eighteen nurses and personal careworkers were interviewed about continence care, and 24 hours of observations were conducted at night in two facilities. RESULTS/FINDINGS: Most residents were checked overnight. This practice was underpinned by staffs' concern that residents were intractably incontinent and at risk of pressure injuries. Staff believed pads protected and dignified residents. Decisions were also influenced by beliefs about limited staff-to-resident ratios. CONCLUSION: Night-time continence care should be audited to ensure decisions are based on residents' preferences, skin health, sleep/wake status, ability to move in bed, and the frequency, severity and type of residents' actual incontinence.

Dielectric behavior of XLPE aged under multi-stressing conditions

In this work fresh cables were laboratory aged under multi-stressing conditions at room temperature. Foils were peeled from cables, with approximately 150 ?m thickness, from the outer, middle and inner positions of the XLPE cable insulating layer. For samples obtained from the outer cable layer position, an increasing near-permanent electrical conduction process with aging time was observed. At the middle and inner cable layer positions a flat-loss relaxation process was observed becoming a dominating process on the ageing. In addition, PEA results confirmed that degradation in the outer region of the XLPE cables arises from the simultaneous presence of dipoles and injected space charge that distorts the internal electric field on the ageing.

Risk factors for developing complications while awaiting a cholecystectomy

Background. Laparoscopic Cholecystectomy is the gold standard for patients who are diagnosed with biliary colic (NIH, 1993). It has been demonstrated that individuals who wait a longer time between diagnosis and treatment are at increased risk of having complications (Rutledge et al., 2000; Contini et al., 2004; Eldar et al., 1999). County hospitals, such as Ben Taub General Hospital (BTGH), have a particularly high population of uninsured patients and consequently long surgical wait periods due to limited resources. This study evaluates patients the risk factors involved in their progression to complications from gallstones in a county hospital environment. ^ Methods. A case-control study using medical records was performed on all patients who underwent a cholecystectomy for gallstone disease at BTGH during the year of 2005 (n=414). The risk factors included in the study are obesity, gender, age, race, diabetes, and amount of time from diagnosis to surgery. Multivariate analysis and logistical regression were used to assess factors that potentially lead to the development of complications. ^ Results. There were a total of 414 patients at BTGH who underwent a cholecystectomy for gallstone disease during 2005. The majority of patients were female, 84.3% (n=349) and Hispanic, 79.7% (n=330). The median wait time from diagnosis to surgery was 1.43 weeks (range: 0-184.71). The majority of patients presented with complications 72.5% (n=112). The two factors that impacted development of complications in our study population were Hispanic race (OR=1.81; CI 1.02, 3.23; p=0.04) and time from diagnosis to surgery (OR=0.98; CI 0.97, 0.99; p<0.01). Obesity, gender, age, and diabetes were not predictive of development of complications. ^ Conclusions. An individual's socioeconomic status potentially influences all aspects of their health and subsequent health care. The patient population of BTGH is largely uninsured and therefore less likely to seek care at an early stage in their disease process. In order to decrease the rate of complications, there needs to be a system that increases patient access to primary care clinics. Until the problem of access to care is solved, those who are uninsured will likely suffer more severe complications and society will bear the cost. ^

The Emergency Department: Rising wait times, costs, and possible remedies

Emergency Departments (EDs) and Emergency Rooms (ERs) are designed to manage trauma, respond to disasters, and serve as the initial care for those with serious illnesses. However, because of many factors, the ED has become the doorway to the hospital and a “catch-all net” for patients including those with non-urgent needs. This increase in the population in the ED has lead to an increase in wait times for patients. It has been well documented that there has been a constant and consistent rise in the number of patients that frequent the ED (National Center for Health Statistics, 2002); the wait time for patients in the ED has increased (Pitts, Niska, Xu, & Burt, 2008); and the cost of the treatment in the ER has risen (Everett Clinic, 2008). Because the ED was designed to treat patients who need quick diagnoses and may be in potential life-threatening circumstances, management of time can be the ultimate enemy. If a system was implemented to decrease wait times in the ED, decrease the use of ED resources, and decrease costs endured by patients seeking care, better outcomes for patients and patient satisfaction could be achieved. The goal of this research was to explore potential changes and/or alternatives to relieve the burden endured by the ED. In order to explore these options, data was collected by conducting one-on-one interviews with seven physicians closely tied to a Level 1 ED (Emergency Room physicians, Trauma Surgeons and Primary Care physicians). A qualitative analysis was performed on the responses of one-on-one interviews with the aforementioned physicians. The interviews were standardized, open-ended questions that probe what makes an effective ED, possible solutions to improving patient care in the ED, potential remedies for the mounting problems that plague the ED, and the feasibility of bringing Primary Care Physicians to the ED to decrease the wait times experienced by the patient. From the responses, it is clear that there needs to be more research in this area, several areas need to be addressed, and a variety of solutions could be implemented. The most viable option seems to be making the ED its own entity (similar to the clinic or hospital) that includes urgent clinics as a part of the system, in which triage and better staffing would be the most integral part of its success.^

How does credit access affect children's time allocation? Evidence from rural India

Using a unique dataset obtained from rural Andhra Pradesh, India that contains direct observations of household access to credit and detailed time use, results of this study indicate that credit market failures lead to a substantial reallocation of time used by children for activities such as schooling, household chores, remunerative work, and leisure. The negative effects of credit constraints on schooling amount to a 60% decrease of average schooling time. However, the magnitude of decrease due to credit constraints is about half that of the increase in both domestic and remunerative child labor, the other half appearing to come from a reduction in leisure.

Real time optimization in chemical process: evaluation of strategies, improvements and industrial application.

The increasing economic competition drives the industry to implement tools that improve their processes efficiencies. The process automation is one of these tools, and the Real Time Optimization (RTO) is an automation methodology that considers economic aspects to update the process control in accordance with market prices and disturbances. Basically, RTO uses a steady-state phenomenological model to predict the process behavior, and then, optimizes an economic objective function subject to this model. Although largely implemented in industry, there is not a general agreement about the benefits of implementing RTO due to some limitations discussed in the present work: structural plant/model mismatch, identifiability issues and low frequency of set points update. Some alternative RTO approaches have been proposed in literature to handle the problem of structural plant/model mismatch. However, there is not a sensible comparison evaluating the scope and limitations of these RTO approaches under different aspects. For this reason, the classical two-step method is compared to more recently derivative-based methods (Modifier Adaptation, Integrated System Optimization and Parameter estimation, and Sufficient Conditions of Feasibility and Optimality) using a Monte Carlo methodology. The results of this comparison show that the classical RTO method is consistent, providing a model flexible enough to represent the process topology, a parameter estimation method appropriate to handle measurement noise characteristics and a method to improve the sample information quality. At each iteration, the RTO methodology updates some key parameter of the model, where it is possible to observe identifiability issues caused by lack of measurements and measurement noise, resulting in bad prediction ability. Therefore, four different parameter estimation approaches (Rotational Discrimination, Automatic Selection and Parameter estimation, Reparametrization via Differential Geometry and classical nonlinear Least Square) are evaluated with respect to their prediction accuracy, robustness and speed. The results show that the Rotational Discrimination method is the most suitable to be implemented in a RTO framework, since it requires less a priori information, it is simple to be implemented and avoid the overfitting caused by the Least Square method. The third RTO drawback discussed in the present thesis is the low frequency of set points update, this problem increases the period in which the process operates at suboptimum conditions. An alternative to handle this problem is proposed in this thesis, by integrating the classic RTO and Self-Optimizing control (SOC) using a new Model Predictive Control strategy. The new approach demonstrates that it is possible to reduce the problem of low frequency of set points updates, improving the economic performance. Finally, the practical aspects of the RTO implementation are carried out in an industrial case study, a Vapor Recompression Distillation (VRD) process located in Paulínea refinery from Petrobras. The conclusions of this study suggest that the model parameters are successfully estimated by the Rotational Discrimination method; the RTO is able to improve the process profit in about 3%, equivalent to 2 million dollars per year; and the integration of SOC and RTO may be an interesting control alternative for the VRD process.

Older driver perception-reaction time for intersection sight distance and object detection. Final report. Volume II: appendixes.

Federal Highway Administration, Office of Safety and Traffic Operations Research and Development, McLean, Va.

Equity in access to outpatient rehabilitation services for children with traumatic brain injury and public insurance

Thesis (Master's)--University of Washington, 2016-06

Virtual design process : design validation tool schematic approach in car carrier

An important aspect of designing any product is validation. Virtual design process (VDP) is an alternative to hardware prototyping in which analysis of designs can be done without manufacturing physical samples. In recent years, VDP have been generated either for animation or filming applications. This paper proposes a virtual reality design process model on one of the applications when used as a validation tool. This technique is used to generate a complete design guideline and validation tool of product design. To support the design process of a product, a virtual environment and VDP method were developed that supports validation and an initial design cycle performed by a designer. The product model car carrier is used as illustration for which virtual design was generated. The loading and unloading sequence of the model for the prototype was generated using automated reasoning techniques and was completed by interactively animating the product in the virtual environment before complete design was built. By using the VDP process critical issues like loading, unloading, Australian Design rules (ADR) and clearance analysis were done. The process would save time, money in physical sampling and to large extent in complete math generation. Since only schematic models are required, it saves time in math modelling and handling of bigger size assemblies due to complexity of the models. This extension of VDP process for design evaluation is unique and was developed, implemented successfully. In this paper a Toll logistics and J Smith and Sons car carrier which is developed under author’s responsibility has been used to illustrate our approach of generating design validation via VDP.

The effects of ambulance ramping on Emergency Department length of stay and mortality

Background: Ambulance ramping within the Emergency Department (ED) is a common problem both internationally and in Australia. Previous research has focused on various issues associated with ambulance ramping such as access block, ED overcrowding and ambulance bypass. However, limited research has been conducted on ambulance ramping and its effects on patient outcomes. ----- ----- Methods: A case-control design was used to describe, compare and predict patient outcomes of 619 ramped (cases) vs. 1238 non-ramped (control) patients arriving to one ED via ambulance from 1 June 2007 to 31 August 2007. Cases and controls were matched (on a 1:2 basis) on age, gender and presenting problem. Outcome measures included ED length of stay and in-hospital mortality. ----- ----- Results: The median ramp time for all 1857 patients was 11 (IQR 6—21) min. Compared to nonramped patients, ramped patients had significantly longer wait time to be triaged (10 min vs. 4 min). Ramped patients also comprised significantly higher proportions of those access blocked (43% vs. 34%). No significant difference in the proportion of in-hospital deaths was identified (2%vs. 3%). Multivariate analysis revealed that the likelihood of having an ED length of stay greater than eight hours was 34% higher among patients who were ramped (OR 1.34, 95% CI 1.06—1.70, p = 0.014). In relation to in-hospital mortality age was the only significant independent predictor of mortality (p < 0.0001). ----- ----- Conclusion: Ambulance ramping is one factor that contributes to prolonged ED length of stay and adds additional strain on ED service provision. The potential for adverse patient outcomes that may occur as a result of ramping warrants close attention by health care service providers.

The mediating effects of the time structure on the relationships between time management behaviour, job satisfaction and psychological wellbeing

This article examined the relationship between time structure and Macan's process model of time management. This study proposed that time structure—‘appraisal of effective time usage’—would be a more parsimonious mediator than perceived control over time in the relationship between time management behaviours and outcome variables, such as job satisfaction and psychological well-being. Alternative structure models were compared using a sample of 111 university students. Model 1 tested Macan's process model of time management with perceived control over time as the mediator. Model 2 replaced perceived control over time by the construct of time structure. Model 3 examined the possibility of perceived control over time and time structure as being parallel mediators of the relationships between time management and outcomes. Results of this study showed that Model 1 and Model 2 fitted the data equally well. On the other hand, the mediated effects were small and partial in both models. This pattern of results calls for reassessment of the process model.

Maintenance strategy optimization using a continuous-state partially observable semi-Markov decision process

Due to the limitation of current condition monitoring technologies, the estimates of asset health states may contain some uncertainties. A maintenance strategy ignoring this uncertainty of asset health state can cause additional costs or downtime. The partially observable Markov decision process (POMDP) is a commonly used approach to derive optimal maintenance strategies when asset health inspections are imperfect. However, existing applications of the POMDP to maintenance decision-making largely adopt the discrete time and state assumptions. The discrete-time assumption requires the health state transitions and maintenance activities only happen at discrete epochs, which cannot model the failure time accurately and is not cost-effective. The discrete health state assumption, on the other hand, may not be elaborate enough to improve the effectiveness of maintenance. To address these limitations, this paper proposes a continuous state partially observable semi-Markov decision process (POSMDP). An algorithm that combines the Monte Carlo-based density projection method and the policy iteration is developed to solve the POSMDP. Different types of maintenance activities (i.e., inspections, replacement, and imperfect maintenance) are considered in this paper. The next maintenance action and the corresponding waiting durations are optimized jointly to minimize the long-run expected cost per unit time and availability. The result of simulation studies shows that the proposed maintenance optimization approach is more cost-effective than maintenance strategies derived by another two approximate methods, when regular inspection intervals are adopted. The simulation study also shows that the maintenance cost can be further reduced by developing maintenance strategies with state-dependent maintenance intervals using the POSMDP. In addition, during the simulation studies the proposed POSMDP shows the ability to adopt a cost-effective strategy structure when multiple types of maintenance activities are involved.

Nitrous oxide emissions from subtropical horticultural soils : a time series analysis

Time series regression models were used to examine the influence of environmental factors (soil water content and soil temperature) on the emissions of nitrous oxide (N2O) from subtropical soils, by taking into account temporal lagged environmental factors, autoregressive processes, and seasonality for three horticultural crops in a subtropical region of Australia. Fluxes of N2O, soil water content, and soil temperature were determined simultaneously on a weekly basis over a 12-month period in South East Queensland. Annual N2O emissions for soils under mango, pineapple, and custard apple were 1590, 1156, and 2038 g N2O-N/ha, respectively, with most emissions attributed to nitrification. The N2O-N emitted from the pineapple and custard apple crops was equivalent to 0.26 and 2.22%, respectively, of the applied mineral N. The change in soil water content was the key variable for describing N2O emissions at the weekly time-scale, with soil temperature at a lag of 1 month having a significant influence on average N2O emissions (averaged) at the monthly time-scale across the three crops. After accounting for soil temperature and soil water content, both the weekly and monthly time series regression models exhibited significant autocorrelation at lags of 1–2 weeks and 1–2 months, and significant seasonality for weekly N2O emissions for mango crop and for monthly N2O emissions for mango and custard apple crops in this location over this time-frame. Time series regression models can explain a higher percentage of the temporal variation of N2O emission compared with simple regression models using soil temperature and soil water content as drivers. Taking into account seasonal variability and temporal persistence in N2O emissions associated with soil water content and soil temperature may lead to a reduction in the uncertainty surrounding estimates of N2O emissions based on limited sampling effort.

An analytical model for performance evaluation of multimedia applications over EDCA in an IEEE 802.11e WLAN

We extend the modeling heuristic of (Harsha et al. 2006. In IEEE IWQoS 06, pp 178 - 187) to evaluate the performance of an IEEE 802.11e infrastructure network carrying packet telephone calls, streaming video sessions and TCP controlled file downloads, using Enhanced Distributed Channel Access (EDCA). We identify the time boundaries of activities on the channel (called channel slot boundaries) and derive a Markov Renewal Process of the contending nodes on these epochs. This is achieved by the use of attempt probabilities of the contending nodes as those obtained from the saturation fixed point analysis of (Ramaiyan et al. 2005. In Proceedings ACM Sigmetrics, `05. Journal version accepted for publication in IEEE TON). Regenerative analysis on this MRP yields the desired steady state performance measures. We then use the MRP model to develop an effective bandwidth approach for obtaining a bound on the size of the buffer required at the video queue of the AP, such that the streaming video packet loss probability is kept to less than 1%. The results obtained match well with simulations using the network simulator, ns-2. We find that, with the default IEEE 802.11e EDCA parameters for access categories AC 1, AC 2 and AC 3, the voice call capacity decreases if even one streaming video session and one TCP file download are initiated by some wireless station. Subsequently, reducing the voice calls increases the video downlink stream throughput by 0.38 Mbps and file download capacity by 0.14 Mbps, for every voice call (for the 11 Mbps PHY). We find that a buffer size of 75KB is sufficient to ensure that the video packet loss probability at the QAP is within 1%.