Coordenação das MEP na implementação de modelos BIM

Dissertação de mestrado integrado em Engenharia Civil

Activities of daily living with reverse prostheses: importance of scapular compensation for functional mobility of the shoulder.

HYPOTHESIS: The nonanatomical design of reverse shoulder prostheses induce medial displacement of the center of rotation, impingements and may reduce the mobility of the shoulder. The aim of this study is to test the hypothesis that during activities of daily living functional mobility of the shoulder can be restored by scapular compensation. MATERIAL AND METHODS: A numerical 3-dimensional model was developed to reproduce the movement of the scapula and humerus, during 4 activities of daily living measured experimentally. This hypothesis was tested in 4 configurations of the aequalis reverse prosthesis (standard 36-mm glenosphere, 42-mm glenosphere, lateralized 36-mm glenosphere, lateralized Bony Increased-Offset Reverse Shoulder Arthroplasty [BIO-RSA]), which were implanted in the virtual model. All impingement positions were evaluated, as the required scapular compensation to avoid impingements. RESULTS: With the 36-mm glenosphere, impingements occurred only for rest of hand to back-pocket positions. The 42-mm partly improved the mobility. The 2 lateralized glenospheres were free of impingement. When impingements occurred, the scapular compensation was less than 10°. CONCLUSION: Most reverse prostheses impingements reported in clinical and biomechanical studies can be avoided, either by scapular compensation or by a glenosphere lateralization. After reverse shoulder arthroplasty, a fraction of the mobility of the gleno-humeral is transferred to the scapulo-thoracic joint.

Virtuaalimallin hyödyntäminen harvesteripään tuotekehityksessä

Virtuaalimallinnuksella tarkoitetaan koneen simulointia, jossa huomioidaan koneen mekaniikka, toimilaitteet ja ohjausjärjestelmä. Työn tavoitteena oli luoda virtuaalimalli harvesteripäästä. Kyseinen virtuaalimalli sisälsi harvesteripään tärkeimmät mekaaniset osat, pituusmittalaitteen hydrauliikkapiirin ja tämän ohjauksen. Luodussa virtuaalimallissa huomioitiin myös harvesteripään ja puun väliset kontaktit. Lisäksi työssä tutkittiin mahdollista virtuaalimallinnuksen implementoimista osaksi yrityksen tuotekehitysprosessia. Työssä suoritettiin verifiointimittaukset pituusmittalaitteen hydrauliikkapiirille sekä virtuaalimallin hydrauliikkakomponentit parametrisoitiin. Mittauksista saatuja tuloksia verrattiin virtuaalimallista saatuihin tuloksiin. Työssä esitellään myös ehdotus kuinka virtuaalimallinnusta kannattaisi hyödyntää osana yrityksen tuotekehitysprosessia. Virtuaalimallin eri osa-alueilla saavutetut tulokset osoittavat, että virtuaalimallinuksen hyödyntäminen tuotekehitysprosessin aikana mahdollistaa harvesteripään toimintojen tarkastelun ennen prototyypin rakentamista ja testaamista. Lisäksi hydrauliikkapiirin parametrisoimisella pystytään tutkimaan parametrien vaikutusta kokonaisuuteen.

Nyttan med virtuella provrum : En utvärderingsstudie av virtuella provrum för online-shopping, med fokus på användbarhet.

Den relativt nya företeelsen BrandME – I am the brand är en eTjänst som fungerar som ett virtuellt provrum och därmed gör det möjligt att kunna prova på kläder virtuellt. Till sin hjälp har man bland annat använt sig av 3D-grafik samt databaser. BrandME är en produkt av det kanadensiska företaget My Virtual Model, ett företag som har arbetat med att sätta standarder för virtuell identitet sedan år 2000.Då denna företeelse är relativ ny, skapar detta utrymme för undersökning och bedömning om huruvida välutvecklad och välanpassad BrandME är. Undersökningens syfte är att utvärdera BrandME för att sedan kunna fastställa nyttan med denna eTjänst. Under utvärderingen koncentrerar vi oss dels på användbarheten hos BrandME och dels på utformningen av BrandME.

Geometric modeling from the medical images in the CAD system to support prosthesis design

This paper presents an individual designing prosthesis for surgical use and proposes a methodology for such design through mathematical extrapolation of data from digital images obtained via tomography of individual patient's bones. Individually tailored prosthesis designed to fit particular patient requirements as accurately as possible should result in more successful reconstruction, enable better planning before surgery and consequently fewer complications during surgery. Fast and accurate design and manufacture of personalized prosthesis for surgical use in bone replacement or reconstruction is potentially feasible through the application and integration of several different existing technologies, which are each at different stages of maturity. Initial case study experiments have been undertaken to validate the research concepts by making dimensional comparisons between a bone and a virtual model produced using the proposed methodology and a future research directions are discussed.

Implementação e teste do método da fronteira imersa para a simulação do escoamento em torno de cilindros estacionários e rotativos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Restaurações inlays em cerâmicas feldspáticas injetadas em pré-molares: efeito da estratégia de cimentação e da ciclagem mecânica na resistência adesiva entre dentina e restauração

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Uso e adequação de tensoestruturas à região Amazônica estudo de caso: Feira do Ver-O-Peso em Belém-Pa

A crescente utilização das tensoestruturas para os mais diversos tipos de uso, nem sempre com a devida preocupação com os aspectos climáticos locais, motivou o presente estudo, o qual avalia a adequação deste tipo de cobertura à Região Amazônica. Em particular, tem-se como objeto de estudo as tensoestruturas da feira do Ver-O-Peso, localizada na cidade de Belém-PA. Neste trabalho, a avaliação do desempenho das coberturas tensionadas utilizadas na feira baseou-se na Arquitetura Bioclimática, com ênfase no desempenho das mesmas como proteção às intempéries. Na metodologia utilizada, a adequação do projeto destas tensoestruturas ao clima da região é verificada utilizando-se os programas Analyses Bio 3.0, o SOL-AR 5.0.1 e o Tensil 2.1. Os resultados obtidos com estes programas permitiram uma análise crítica do projeto das tensoestruturas da feira do Ver-O-Peso, quanto à orientação destas estruturas com relação à direção dos ventos predominantes e incidência dos raios solares, assim como no que diz respeito ao seu desempenho térmico e luminoso. Para estudar precisamente a incidência solar nas estruturas de acordo com a posição do sol, foi desenvolvida uma maquete eletrônica, utilizando-se o programa 3 DS MAX 8. Posteriormente, algumas simulações computacionais foram realizadas considerando as coordenadas geográficas da cidade de Belém e a respectiva trajetória do sol, durante o solstício de verão, solstício de inverno e equinócio; Além das análises realizadas através destes programas, foi desenvolvida também uma pesquisa de campo, com base na aplicação de questionários aos usuários da feira (feirantes e clientes). Os resultados obtidos demonstraram a necessidade de melhoria na proteção no interior destas tensoestruturas, especialmente para as barracas localizadas na periferia da área coberta. Para isso, sugere-se a utilização de um anteparo feito com uma membrana translúcida. Este anteparo, colocado estrategicamente nas regiões mais críticas da cobertura permitiria a passagem da luz, porém diminuindo os efeitos da radiação direta e criaria uma proteção mais eficaz para as chuvas, sem agredir esteticamente o projeto original.

Validação de aplicativo comercial visando a incorporação da realidade aumentada a um modelo de avaliação pós-ocupação

Post-Occupancy Evaluation of buildings considers user satisfaction, building pathologies and performance, as well as users interventions in the built environment. The possibility of identifying interventions regardless of the user could provide a significant gain in the efficiency of Post-Occupancy Evaluations. We foresee the application of Augmented Reality (AR) to improve the identification of renovations by overlapping the construction information model with an image of the actual building. This article validates the use of AR on existing smartphone and tablet applications. This study proposes the incorporation of AR into the planning, execution and application of Post-Occupancy Evaluation. For the planning, this study proposes the development of a new research tool. With regards to the execution, this study examined the data collection conditions on site through the visualization of overlapping models. For the application, this study proposes displaying the results through the use of RA information layers. The transparency oft he RA model was used to allow comparison between the virtual model and the real model. The development and adaptation of the virtual model and the solution developed for the experiment of the RA proposal are presented and discussed. The experiment points to shortcomings that still make the proposed technological solution unfeasible.

Utilização de material alternativo para a obtenção e caracterização de biomodelos, por meio da técnica de impressão 3DPRINTER

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Background minimization issues for next generation hard X-ray focusing telescopes

The hard X-ray band (10 - 100 keV) has been only observed so far by collimated and coded aperture mask instruments, with a sensitivity and an angular resolution lower than two orders of magnitude as respects the current X-ray focusing telescopes operating below 10 - 15 keV. The technological advance in X-ray mirrors and detection systems is now able to extend the X-ray focusing technique to the hard X-ray domain, filling the gap in terms of observational performances and providing a totally new deep view on some of the most energetic phenomena of the Universe. In order to reach a sensitivity of 1 muCrab in the 10 - 40 keV energy range, a great care in the background minimization is required, a common issue for all the hard X-ray focusing telescopes. In the present PhD thesis, a comprehensive analysis of the space radiation environment, the payload design and the resulting prompt X-ray background level is presented, with the aim of driving the feasibility study of the shielding system and assessing the scientific requirements of the future hard X-ray missions. A Geant4 based multi-mission background simulator, BoGEMMS, is developed to be applied to any high energy mission for which the shielding and instruments performances are required. It allows to interactively create a virtual model of the telescope and expose it to the space radiation environment, tracking the particles along their path and filtering the simulated background counts as a real observation in space. Its flexibility is exploited to evaluate the background spectra of the Simbol-X and NHXM mission, as well as the soft proton scattering by the X-ray optics and the selection of the best shielding configuration. Altough the Simbol-X and NHXM missions are the case studies of the background analysis, the obtained results can be generalized to any future hard X-ray telescope. For this reason, a simplified, ideal payload model is also used to select the major sources of background in LEO. All the results are original contributions to the assessment studies of the cited missions, as part of the background groups activities.

La Ricostruzione 3D di Bologna nel XVI Secolo

Il lavoro presentato ha come oggetto la ricostruzione tridimensionale della città di Bologna nella sua fase rinascimentale. Tale lavoro vuole fornire un modello 3D delle architetture e degli spazi urbani utilizzabile sia per scopi di ricerca nell’ambito della storia delle città sia per un uso didattico-divulgativo nel settore del turismo culturale. La base del lavoro è una fonte iconografica di grande importanza: l’affresco raffigurante Bologna risalente al 1575 e situato in Vaticano; questa è una veduta a volo d’uccello di grandi dimensioni dell’intero tessuto urbano bolognese all’interno della terza cerchia di mura. In esso sono rappresentate in maniera particolareggiata le architetture civili e ecclesiastiche, gli spazi ortivi e cortilivi interni agli isolati e alcune importanti strutture urbane presenti in città alla fine del Cinquecento, come l’area portuale e i canali interni alla città, oggi non più visibili. La ricostruzione tridimensionale è stata realizzata tramite Blender, software per la modellazione 3D opensource, attraverso le fasi di modellazione, texturing e creazione materiali (mediante campionamento delle principali cromie presenti nell’affresco), illuminazione e animazione. Una parte della modellazione è stata poi testata all’interno di un GIS per verificare l’utilizzo delle geometrie 3D come elementi collegabili ad altre fonti storiche relative allo sviluppo urbano e quindi sfruttabili per la ricerca storica. Grande attenzione infine è stata data all’uso dei modelli virtuali a scopo didattico-divulgativo e per il turismo culturale. La modellazione è stata utilizzata all’interno di un motore grafico 3D per costruire un ambiente virtuale interattivo nel quale un utente anche non esperto possa muoversi per esplorare gli spazi urbani della Bologna del Cinquecento. In ultimo è stato impostato lo sviluppo di un’applicazione per sistemi mobile (Iphone e Ipad) al fine di fornire uno strumento per la conoscenza della città storica in mobilità, attraverso la comparazione dello stato attuale con quello ricostruito virtualmente.

Seismic vulnerability of the ancient albergotti's manor in Arezzo, Italy

The thesis moves from the need of understanding how a historical building would behave in case of earthquake and this purpose is strongly linked to the fact that the majority of Italian structures are old ones placed in seismic sites. Primarily an architectural and chronological research is provided in order to figure out how the building has developed in time; then, after the reconstruction of the skeleton of the analyzed element (“Villa i Bossi” in Gragnone, AR), a virtual model is created such that the main walls and sections are tested according to the magnitude of expected seismic events within the reference area. This approach is basically aimed at verifying the structure’s reliability as composed by single units; the latter are treated individually in order to find out all the main critical points where rehabilitation might be needed. Finally the most harmful sections are studied in detail and proper strengthening is advised according to the current know-how.

Augmented environments for the targeting of hepatic lesions during image-guided robotic liver surgery

BACKGROUND Stereotactic navigation technology can enhance guidance during surgery and enable the precise reproduction of planned surgical strategies. Currently, specific systems (such as the CAS-One system) are available for instrument guidance in open liver surgery. This study aims to evaluate the implementation of such a system for the targeting of hepatic tumors during robotic liver surgery. MATERIAL AND METHODS Optical tracking references were attached to one of the robotic instruments and to the robotic endoscopic camera. After instrument and video calibration and patient-to-image registration, a virtual model of the tracked instrument and the available three-dimensional images of the liver were displayed directly within the robotic console, superimposed onto the endoscopic video image. An additional superimposed targeting viewer allowed for the visualization of the target tumor, relative to the tip of the instrument, for an assessment of the distance between the tumor and the tool for the realization of safe resection margins. RESULTS Two cirrhotic patients underwent robotic navigated atypical hepatic resections for hepatocellular carcinoma. The augmented endoscopic view allowed for the definition of an accurate resection margin around the tumor. The overlay of reconstructed three-dimensional models was also used during parenchymal transection for the identification of vascular and biliary structures. Operative times were 240 min in the first case and 300 min in the second. There were no intraoperative complications. CONCLUSIONS The da Vinci Surgical System provided an excellent platform for image-guided liver surgery with a stable optic and instrumentation. Robotic image guidance might improve the surgeon's orientation during the operation and increase accuracy in tumor resection. Further developments of this technological combination are needed to deal with organ deformation during surgery.

Estudio Acústico y Electroacústico de la sala de conciertos Ritmo y Compás (Madrid)

En el presente proyecto se ha realizado un estudio de las condiciones acústicas y del refuerzo sonoro de la sala de conciertos Ritmo y Compás (Madrid), repasando las principales magnitudes de calidad acústica. El proyecto combina medidas y simulaciones. Con las medidas se obtienen los parámetros acústicos de la sala, que permiten cuantificar la sensación que producen en la audiencia las cualidades acústicas de un espacio. Mediante software de simulación electroacústica (EASE) se ha generado el modelo geométrico y acústico de la sala, ajustado en base a los resultados experimentales. El objetivo fundamental del trabajo es generar un modelo virtual que refleje fielmente las condiciones reales de la sala de conciertos, de forma que se puedan estudiar en profundidad las características acústicas y electroacústicas del recinto. En el proceso de análisis se ha querido resaltar la importancia de la acústica en salas de conciertos de música amplificada, muchas veces relegada a un segundo plano por el diseño electroacústico. La calidad de una sala de este tipo depende estrechamente de la sonorización, pero su inevitable relación con las cualidades acústicas del recinto obliga a establecer una serie de criterios acústicos mínimos que aseguren las mejores condiciones para el sistema sonoro. Dado el peso de las simulaciones, en el proyecto se presentan los resultados obtenidos con distintos métodos y recursos de análisis software para apoyar el estudio, con una información completa que muestre, con la máxima claridad, el potencial de la sala Ritmo y Compás como sala de conciertos. SUMMARY. This project is about the acoustical and electroacustical studio of “Ritmo y Compás”, an important concert hall in Madrid, analyzing the main magnitudes of acoustic quality. The project combines measurements and simulations. With the measurements it is obtained the acoustic parameters of the hall, allowing the quantification of the sensation produced in the audience by the acoustic attributes of the hall. With the acoustic simulation software (Ease), based on the experimental results, the geometric and acoustic model has been created. The main purpose of this study is to generate a virtual model that accurately reflects the real conditions of the concert hall, allowing the deep study of the acoustic and electroacoustic features of the hall. In the process of the analysis, the importance of the acoustic characteristic in the amplified music concert halls was emphasized, which is often underestimate because of the electroacoustic design. The quality of this kind of hall strictly depends on the sound electrical system, but its inevitable relation with the acoustic characteristics of the hall, forces to establish a series of minimum acoustic rules that assures the best conditions for the sound system. Due to the importance of the simulations in the project, the results are presented with different methods and analysis software resources to back up the study with complete information that shows the maximum quality and clarity of the potential of the enclosure Ritmo y Compás as a concert hall.