Clinical evaluation of low-level laser therapy and fluoride varnish for treating cervical dentinal hypersensitivity

The aim of this study was to evaluate in vivo the use of low-level galium-aluminium-arsenide (GaAlAs) (BDP 600) laser and sodium fluoride varnish (Duraphat((R))) in the treatment of cervical dentine hypersensitivity. Twelve patients, with at least two sensitive teeth were selected. A total of 60 teeth were included in the trial. Prior to desensitizing treatment, dentine hypersensitivity was assessed by a thermal stimulus and patients' response to the examination was considered to be a control. The GaAlAs laser (15 mW, 4 J/cm(2)) was irradiated on contact mode and fluoride varnish was applied at cervical region. The efficiency of the treatments was assessed at three examination periods: immediately after first application, 15 and 30 days after the first application. The degree of sensitivity was determined following predefined criteria. Data were submitted to analysis and no statistically significant difference was observed between fluoride varnish and laser. Considering the treatments separately, there was no significant difference for the fluoride varnish at the three examination periods, and for laser therapy, significant difference (P < 0.05) was found solely between the values obtained before the treatment and 30 days after the first application. It may be concluded that both treatments may be effective in decreasing cervical dentinal hypersensitivity. Moreover, the low-level GaAlAs laser showed improved results for treating teeth with higher degree of sensitivity.

Utvärdering av mätmetoder för att fastställa lackmängden vid offsettryckning on-line

This project has been made in cooperation with Stora Enso Research Centre Falun (Research). Thebackground of the project is that Research has customers who demand a method to measure the quantityof varnish online in offset printing. The aim with the project is to investigate if any test method correlateswith the quantity of varnish and to improve the understanding of the variables in the varnishingunit. The goal with the project is to develop a functional method. Two printing trials have beenperformed. The aim with the first trial was to investigate how different factors in the printer influencedthe quantity of varnish using reduced factoranalysis. The aim of the second trial was to analyse onlya reduced numbers of factors in the varnishing unit. The methods that were used to measure the varnishingquantity are weighing, IR-analysis, gloss, whiteness and brightness. Results from the projectshow that the weighing method does not work in this study due to basis weight variations of the sheets.The results from weighing did not agree with the results from the other methods. On the other handthere is a strong correation between the IR- and the glossmethods.

Non-isothermal decomposition kinetics of the interaction of poly(ethylene terephthalate) with alkyd varnish

The recycling of soft drink bottles poly(ethylene terephthalate) (PET) has been used as an additive in varnish containing alkyd resin. The PET, called to recycled PET (PET-R), was added to the varnish in increasing amounts. Samples of varnish containing PET-R (VPET-R) were used as a film onto slides and its thermal properties were evaluated using thermogravimetry (TG). Throughout the visual analysis and thermal behavior of VPET-R it is possible to identify that the maximum amount of PET-R added to the varnish without changing in the film properties was 2%.The kinetic parameters, such as activation energy (E) and the pre-exponential factor (A) were calculated by the isoconversional Flynn-Wall-Ozawa method for the samples containing 0.5 to 2.0% PET-R. A decrease in the values of E was verified for lower amounts of PET-R for the thermal decomposition reaction. A kinetic compensation effect (KCE) represented by the lnA=-13.42+0.23E equation was observed for all samples. The most suitable kinetic model to describe this decomposition process is the autocatalytic Sestak-Berggren, being the model applied to heterogeneous systems.

Control of white spot lesion adjacent to orthodontic bracket with use of fluoride varnish or chlorhexidine gel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The antinociceptive effect of electroacupuncture at different depths of acupoints and under the needling surface

Background The stimulation of acupoints along the meridians, but not the non-acupoints outside of the meridians, produces analgesia. Although the acupoint is defined at the body surface, the exact location of the acupoints is not known. This study aims to examine whether the intensity and duration of the analgesic effect of electroacupuncture (EA) at the Zusanli (ST36) and Sanynjiao acupoints (SP6) change according to the depth of the stimulation. Methods Ninety-six male Wistar rats classified as responders were arbitrarily allocated into 16 groups of six rats each. Six groups received EA with uninsulated acupuncture needles (type I) or needles that were immersed in varnish and had the varnish circularly peeled 0.2 mm from the tip (type II), 0.2 mm at 3 mm (type III) or 5 mm (type IV) from the tip, or 0.2 mm at 5 and 1 mm from the tip (type V), or EA sham for 20 min. Five groups received injection of formalin into the acupoint bilaterally at 5 mm or 1 mm deep into ST36, 5 mm below ST36 but inserting the needle at 45° to the skin surface, or 5 mm deep into non-acupoints. The remaining groups received intraplantar injection of saline, 1% or 2.5% formalin. The analgesic effects were measured by the rat tail-flick test. Results The bilateral stimulation of ST36 and SP6 by uninsulated or insulated needles produced analgesia in the rat tail-flick test. The stronger and longer lasting effects occurred after EA with the types I and V needles, or injection of formalin 5 mm deep into ST36. The remaining needles produced weaker and shorter lasting effects. Slow analgesic effect also occurred after formalin injection at 1 mm or 5 mm below ST36 by inserting the needle at 45° to the skin surface. Conclusion The experimental results suggest that the efficacy of the EA stimulation depends on the spatial distribution of the current density under the needling surface rather than only the acupoint or the depth of needling.

Efetividade da aplicação semestral de verniz fluoretado no controle da cárie dentária em pré-escolares: resultados após 12 meses de acompanhamento

O presente estudo teve como objetivos avaliar se a aplicação de verniz fluoretado com periodicidade semestral em crianças pré-escolares reduz o número de crianças com lesões de cárie em dentina na dentição decídua, diminui a incidência de lesões de cárie em esmalte e dentina, está inversamente associado à ocorrência de dor e abscesso dentário e produz quaisquer efeitos adversos. A população de estudo consistiu de 200 crianças na faixa etária de 12 a 48 meses, recrutadas em uma unidade de saúde pública da cidade do Rio de Janeiro, as quais foram alocadas aleatoriamente nos grupos teste (verniz fluoretado Duraphat) e controle (verniz placebo). Para o registro da incidência de cárie, as crianças foram examinadas na linha de base e a cada seis meses, durante um ano, por dois odontopediatras previamente treinados e calibrados (Kappa=0,85). A ocorrência de dor, abscesso e efeitos adversos foi verificada a partir de entrevistas com os responsáveis. Os participantes, os seus responsáveis, os operadores e os examinadores desconheciam a qual grupo cada criança pertencia. No final do período de acompanhamento, 71 crianças do grupo teste e 77 do grupo controle foram avaliadas. Constatou-se que, nos grupos teste e controle, o número de crianças com novas lesões de cárie em dentina foi igual a 13 e 20 (teste Qui-quadrado, p=0,34) e que a média do incremento de cárie considerando apenas lesões em dentina (c3eos) foi de 1,1(dp=3,4) e de 1,4(dp=2,8), respectivamente (teste de Mann-Whitney, p=0,29). Uma criança apresentou dor de dente e abscesso dentário e outras duas crianças apresentaram apenas dor de dente. Todas pertenciam ao grupo teste. Com relação aos efeitos adversos, encontrou-se que uma criança pertencente ao grupo controle relatou ardência na cavidade bucal após a aplicação do placebo e que o responsável por um participante do grupo teste sentiu-se incomodado com a coloração amarelada dos dentes da criança após a aplicação do verniz fluoretado. Concluiu-se que a aplicação de verniz fluoretado com periodicidade semestral em crianças pré-escolares é segura e parece contribuir para o controle da progressão de cárie. Contudo, é necessário um período de acompanhamento mais longo para se obter evidência conclusiva a respeito da efetividade dessa intervenção. Não houve associação entre a ocorrência de dor e abscesso dentário e o uso profissional do verniz fluoretado.

东南极格罗夫山地区的土壤特征及其环境研究

The Grove Mountains, including 64 nunataks, is situated on an area about 3200km2 in the inland ice cap of east Antarctica in Princess Elizabeth land (72o20'-73°101S, 73°50'-75o40'E), between Zhongshan station and Dome A, about 450km away from Zhongshan station (69°22'S, 76°22'E). Many workers thought there was no pedogenesis in the areas because of the less precipitation and extreme lower temperature. However, during the austral summer in 1999-2000, the Chinaer 16 Antarctic expedition teams entered the inland East Antarctica and found three soil spots in the Southern Mount Harding, Grove Mountains, East Antarctica. It is the first case that soils are discovered in the inland in East Antarctica. Interestingly, the soils in this area show clay fraction migration, which is different from other cold desert soils. In addition, several moraine banks are discovered around the Mount Harding. The soil properties are discussed as below. Desert pavement commonly occurs on the three soil site surfaces, which is composed of pebbles and fragments formed slowly in typical desert zone. Many pebbles are subround and variegated. These pebbles are formed by abrasion caused by not only wind and wind selective transportation, but also salt weathering and thaw-freezing action on rocks. The wind blows the boulders and bedrocks with snow grains and small sands. This results in rock disintegration, paved on the soil surface, forming desert pavement, which protects the underground soil from wind-blow. The desert pavement is the typical feature in ice free zone in Antarctica. There developed desert varnish and ventifacts in this area. Rubification is a dominant process in cold desert Antarctic soils. In cold desert soils, rubification results in relatively high concentrations of Fed in soil profile. Stained depth increases progressively with time. The content of Fed is increasing up to surface in each profile. The reddish thin film is observed around the margin of mafic minerals such as biotite, hornblende, and magnetite in parent materials with the microscope analyzing on some soil profiles. So the Fed originates from the weathering of mafic minerals in soils. Accumulations of water-soluble salts, either as discrete horizons or dispersed within the soil, occur in the soil profiles, and the salt encrustations accumulate just beneath surface stones in this area. The results of X-ray diffraction analyses show that the crystalline salts consist of pentahydrite (MgSO4-5H2O), hexahydrite (MgSO4-6H2O), hurlbutite (CaBe2(PO4)2), bloedite (Na2Mg(S04)2-4H2O), et al., being mainly sulfate. The dominant cations in 1:5 soil-water extracts are Mg2+ and Na+, as well as Ca2+ and K+, while the dominant anion is SO42-, then NO3-, Cl- and HCO3-. There are white and yellowish sponge materials covered the stone underside surface, of which the main compounds are quartz (SiO2, 40.75%), rozenite (FeSOKkO, 37.39%), guyanaite (Cr2O3-1.5H2O, 9.30%), and starkeyite (MgSO4-4H2O, 12.56%). 4) The distribution of the clay fraction is related to the maximum content of moisture and salts. Clay fraction migration occurs in the soils, which is different from that of other cold desert soils. X-ray diffraction analyses show that the main clay minerals are illite, smectite, then illite-smectite, little kaolinite and veirniculite. Mica was changed to illite, even to vermiculite by hydration. Illite formed in the initial stage of weathering. The appearance of smectite suggests that it enriched in magnesium, but no strong eluviation, which belongs to cold and arid acid environment. 5) Three soil sites have different moisture. The effect moisture is in the form of little ice in site 1. There is no ice in site 2, and ice-cement horizon is 12 cm below the soil surface in site 3. Salt horizon is 5-10 cm up to the surface in Site 1 and Site 2, while about 26cm in site 3. The differentiation of the active layer and the permafrost are not distinct because of arid climate. The depth of active layer is about 10 cm in this area. Soils and Environment: On the basis of the characteristics of surface rocks, soil colors, horizon differentiation, salt in soils and soil depth, the soils age of the Grove Mountains is 0.5-3.5Ma. No remnants of glaciations are found on the soil sites of Mount Harding, which suggests that the Antarctic glaciations have not reached the soil sites since at least 0.5Ma, and the ice cap was not much higher than present, even during the Last Glacial Maximum. The average altitude of the contact line of level of blue ice and outcrop is 2050m, and the altitude of soil area is 2160m. The relative height deviation is about 110m, so the soils have developed and preserved until today. The parental material of the soils originated from alluvial sedimentary of baserocks nearby. Sporepollen were extracted from the soils, arbor pollen grains are dominant by Pinus and Betula, as well as a small amount Quercus, Juglans, Tilia and Artemisia etc. Judging from the shape and colour, the sporepollen group is likely attributed to Neogene or Pliocene in age. This indicates that there had been a warm period during the Neogene in the Grove Mountains, East Antarctica.

Unga vuxnas åsikter kring bokomslags formgivning : En enkät- och fokusgruppsundersökning

Bokomslaget är ofta läsarens första möte med en bok och det är därför viktigt att bokomslaget tilltalar och sänder ut rätt signaler till konsumenten. Målgruppen unga vuxna, individer mellan 16 och 27 år, är enligt bokbranschen en grupp som är svår att nå. Svårigheten kan ligga i att det finns en viss okunskap i vad unga vuxna tilltalas av på bokomslag. Det är även en bred målgrupp med många olika sorters individer. Målet med denna studie är att ge en bild av vad målgruppen unga vuxna tilltalas av i ett bokomslag. Vi ville ta reda på hur viktigt bokomslaget är för val av bok, samt hur målgruppen ser på omslagets specifika designfaktorer färg, typografi, illustration, fotografi och efterbehandling. För att ge oss en bild av dagens kunskapsläge har litteraturstudier och intervjuer med formgivare av bokomslag genomförts. Genom en omfattande enkätundersökning och utförda fokusgrupper fick vi fram målgruppens syn och tankar kring bokomslag. Fokusgrupper utfördes för att ge oss en djupare förståelse rörande hur målgruppen ser på bokomslag samt ge oss ett djupare resonemang kring de olika bokomslagen. Resultatet visar att unga vuxna lägger stor vikt vid identitet och ett bokomslag bör således sända tydliga signaler som kan bekräfta läsarens identitet. Typografin ska vara lättläst. Målgruppen ser helst fotografiska bilder på bokomslaget och omslaget ska förmedla en känsla av bokens innehåll. Färger i en dovare färgskala tilltalar unga vuxna, rött och svart tycks vara de populäraste färgerna överlag. Efterbehandlingen (t.ex. lackering och foliering) på ett bokomslag bör vara sparsam och användning av färgen rosa lika så.

Community water fluoridation : is it still worthwhile

Community Water Fluoridation (CWF) is the adjustment of fluoride concentration in community drinking water to a level that confers optimal protection from dental caries (Truman et al 2002). It is supported by many authorities as the single most effective public health measure for reducing dental caries (DHS 2007). It has consistently been shown to be effective in reducing the prevalence and severity of dental caries in populations following its introduction (NHMRC 1999). The most dramatic reductions (50-60%) were demonstrated in the earlier studies although more recent research has still shown reductions of between 30 and 50% (Truman et al 2002). Despite the strong scientific evidence for its beneficial effects and safety the issue of the appropriateness of CWF is often the focus of public debate. Proponents argue that it reduces dental caries. is safe and cost effective. and that it provides significant benefits to all social classes (Slade et al 1995: Slade et a 1996: Spencer et al 1996). Opponents question its efficacy and safety and argue that its addition to community water supplies is unethical mass medication (Colquhoun 1990: Diesendorf 1986: Diesendorf et al 1997).

More recently, however, there have been important questions raised regarding the continuing benefit of CWF over and above that produced by the widespread use of other sources of fluoride (toothpaste. mouth rinses. varnish and other professionally applied fluorides). Generally, dental caries has declined steeply in the last thirty years and many have observed that dental caries has also reduced in parts of Australia and other countries where there has never been CWF or where it has ceased. It has been suggested that because of the current low population levels of dental caries and the increase in alternate sources of fluoride, CWF no longer offers the benefits it may have in the past. Given this notion, together with the concerns of a minority subgroup of the population regarding the safety of CWF, it is valuable to examine current evidence to answer the question: Is there still a role for CWF in Australia?

This paper will firstly examine the history of water fluoridation and its mechanisms of action. Secondly. trends in dental decay experience over the last three decades with particular emphasis on social and geographical inequities in Australia will be described. We also review the current state of scientific evidence for the benefits of CWF including the contribution it makes to the reduction of oral health inequalities. In light of this we will provide a response to the question posed above.

Avaliação da liberação de íon fluoreto de cimentos ionoméricos antes e após a recarga e com proteção da superfície

Objective: To evaluate fluoride ion release from two anhydrous glass ionomer cements (GICs) and two resin-modified GICs (RMGICs) before and after recharge with 2% neutral sodium fluoride for 4 min and after surface protection of the Maxxion R GIC with an adhesive system, a cavity varnish and a colorless nail polish. Method: A stainless steel 2x6 mm matrix was used for fabricating 5 specimens of each material, which were immersed in 5 mL of deionized water, renewed every 24 h. Measurements with a potentiometer were performed on days 1, 2, 9 and 17, in the 1st and 2nd phases, and the specimens were buffered with a TISAB III solution. In the 2nd phase, the specimens were subjected to recharge and immersed again in 5 mL of deionized water. In the 3rd phase, the GIC surfaces were protected and readings were made at 5 min, 24 h, 48 h and 72 h. Tukey's post-hoc and Student's t tests were used for statistical analyses (p<0.05). Results: There was statistically significant difference in the comparison between the 1st and 2nd phases for all materials, except at day 2 for Vidrion R and VitroFil LC. In the 3rd phase, it was observed that for all materials, comparison of the first 5 min with the other times revealed statistically significant differences among the means of fluoride ion release. In the comparison with the other times, both the varnish and the colorless nail polish presented statistically significant difference between 24 and 48 h as well as between 24 and 72 h. Conclusion: The anhydrous GICs were more effective in fluoride ion release and recharge compared with the RMGICs. Maxxion R presented a homogeneous and statistically significant behavior in both phases. All materials for surface protection were efficient and the colorless nail polish had the best behavior.

Efeito do laser de Nd:YAG do fluoreto de sódio na prevenção da erosão em dentina bovina através de perfilometria

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação in vitro da microinfiltração marginal e análise da fenda marginal cervical através da microscopia eletrônica de varredura, em restaurações de classe V de resina composta. Efeito dos sistemas adesivos e técnica de preparo cavitário

Pós-graduação em Ciências Odontológicas - FOAR

Longitudinal effect of curcumin-photodynamic antimicrobial chemotherapy in adolescents during fixed orthodontic treatment: a single-blind randomized clinical trial study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Molar incisor hypomineralization: considerations about treatment in a controlled longitudinal case

Molar incisor hypomineralization (MIH) is a defect in the tooth enamel of systemic origin and may affect one or all four first permanent molars frequently associated with the permanent incisors. This case reports a 7-year-old child with severe MIH in the permanent molars associated with tooth decay and intense pain. In the first stage of treatment, therapy was performed with fluoride varnish and restoration with glass ionomer cement (GIC). After 6 years of clinical and radiographic follow-up, the restorations presented wear and fractures on the margins, indicating their replacement with composite resin. Severe cases of MIH in the early permanent molars can be treated with varnish and GIC to restore the patient's comfort and strengthen the hypomineralized dental structures. The clinical and radiographic monitoring frequently indicated when the restoration with composite resin should be performed.

(Table 3) Age-related trends of desert pavement properties in the Transantarctic Mountains

Compared to mid-latitude deserts, the properties, formation and evolution of desert pavements and the underlying vesicular layer in Antarctica are poorly understood. This study examines the desert pavements and the vesicular layer from seven soil chronosequences in the Transantarctic Mountains that have developed on two contrasting parent materials: sandstone-dolerite and granite-gneiss. The pavement density commonly ranges from 63 to 92% with a median value of 80% and does not vary significantly with time of exposure or parent material composition. The dominant size range of clasts decreases with time of exposure, ranging from 16-64 mm on Holocene and late Quaternary surfaces to 8-16 mm on surfaces of middle Quaternary and older age. The proportion of clasts with ventifaction increases progressively through time from 20% on drifts of Holocene and late Quaternary age to 35% on Miocene-aged drifts. Desert varnish forms rapidly, especially on dolerite clasts, with nearly 100% cover on surfaces of early Quaternary and older age. Macropitting occurs only on clasts that have been exposed since the Miocene. A pavement development index, based on predominant clast-size class, pavement density, and the proportion of clasts with ventifaction, varnish, and pits, readily differentiated pavements according to relative age. From these findings we judge that desert pavements initially form from a surficial concentration of boulders during till deposition followed by a short period of deflation and a longer period of progressive chemical and physical weathering of surface clasts. The vesicular layer that underlies the desert pavement averages 4 cm in thickness and is enriched in silt, which is contributed primarily by weathering rather than eolian deposition. A comparison is made between desert pavement properties in mid-latitude deserts and Antarctic deserts.