Fire safety of steel wall systems using enhanced plasterboards

Fire safety design is important to eliminate the loss of property and lives during fire events. Gypsum plasterboard is widely used as a fire safety material in the building industry all over the world. It contains gypsum (CaSO4.2H2O) and Calcium Carbonate (CaCO3) and most importantly free and chemically bound water in its crystal structure. The dehydration of the gypsum and the decomposition of Calcium Carbonate absorb heat, which gives the gypsum plasterboard fire resistant qualities. Currently plasterboard manufacturers use additives such as vermiculite to overcome shrinkage of gypsum core and glass fibre to bridge shrinkage cracks and enhance the integrity of board during calcination and after the loss of paper facings in fires. Past research has also attempted to reduce the thermal conductivity of plasterboards using fillers. However, no research has been undertaken to enhance the specific heat of plasterboard and the points of dehydration using chemical additives and fillers. Hence detailed experimental studies of powdered samples of plasterboard mixed with chemical additives and fillers in varying proportions were conducted. These tests showed the enhancement of specific heat of plasterboard. Numerical models were also developed to investigate the thermal performance of enhanced plasterboards under standard fire conditions. The results showed that the use of these enhanced plasterboards in steel wall systems can significantly improve their fire performance. This paper presents the details of this research and the results that can be used to enhance the fire safety of steel wall systems commonly used in buildings.

Development of a small-plant bioassay to assess banana grown from tissue culture for consistent infection by Fusarium oxysporum f. sp. cubense

Two reliable small-plant bioassays were developed using tissue-cultured banana, resulting in consistent symptom expression and infection by Fusarium oxysporum f. sp. cubense (Foc). One bioassay was based on providing a constant watertable within a closed pot and the second used free-draining pots. Culture medium for spore generation influenced infectivity of Foc. Inoculation of potted banana by drenching potting mix with a conidial suspension, consisting mostly of microconidia, few macroconidia and no chlamydospores, generated from one-quarter-strength potato dextrose agar + streptomycin sulfate, resulted in inconsistent infection. When a conidial suspension that consisted of all three spore types, microconidia, macroconidia and chlamydospores, prepared from spores generated on carnation leaf agar was used, all plants became infected, indicating that the spore type present in conidial suspensions may contribute to inconsistency of infection. Inconsistency of infection was not due to loss of virulence of the pathogen in culture. Millet grain precolonised by Foc as a source of inoculum resulted in consistent infection between replicate plants. Sorghum was not a suitable grain for preparation of inoculum as it was observed to discolour roots and has the potential to stunt root growth, possibly due to the release of phytotoxins. For the modified closed-pot system, a pasteurised potting mix consisting of equal parts of bedding sand, perlite and vermiculite plus 1 g/L Triabon slow release fertiliser was suitable for plant growth and promoted capillary movement of water through the potting mix profile. A suitable potting mix for the free-draining pot system was also developed.

Application of sorbers to mitigate greenhouse gas emissions from land-applied pig litter

Nitrous oxide is the foremost greenhouse gas (GHG)generated by land-applied manures and chemical fertilisers (Australian Government 2013). This research project was part of the National Agricultural Manure Management Program and investigated the potential for sorbers (i.e. specific naturally-occurring minerals) to decrease GHG emissions from spent piggery litter (as well as other manures)applied to soils. The sorbers investigated in this research were vermiculite and bentonite. Both are clays with high cation exchange capacities, of approximately 100–150 cmol/kg Faure 1998). The hypothesis tested in this study was that the sorbers bind ammonium in soil solution thereby suppressing ammonia (NH3)volatilisation and in doing so, slowing the kinetics of nitrate formation and associated nitrous oxide (N2O) emissions. A series of laboratory, glasshouse and field experiments were conducted to assess the sorbers’ effectiveness. The laboratory experiments comprised 64 vessels containing manure and sorber/manure ratios ranging from 1 : 10 to 1 : 1 incorporated into a sandy Sodosol via mixing. The glasshouse trial involved 240 pots comprising manure/sorber incubations placed 5 cm below the soil surface, two soil types (sandy Sodosol and Ferrosol) and two different nitrogen (N) application rates (50 kg N/ha and 150 kg N/ha) with a model plant (kikuyu grass). The field trial consisted of 96, 2 m · 2 m plots on a Ferrosol site with digit grass used as a model plant. Manure/ sorber mixtures were applied in trenches (5 cm below surface) to these plots at increasing sorber levels at anNloading rate of 200 kg/ha. Gas produced in all experiments was plumbed into a purpose-built automated gas analysis (N2O, NH3, CH4, CO2) system. In the laboratory experiments, the sorbers showed strong capacity to decreaseNH3 emissions (up to 80% decrease). Ammonia emissions were close to the detection limit in all treatments in the glasshouse and field trial. In all experiments, considerable N2O decreases (>40%) were achieved by the sorbers. As an example, mean N2O emission decreases from the field trial phase of the project are shown in Fig. 1a. The decrease inGHGemissions brought about by the clays did not negatively impact agronomic performance. Both vermiculite and bentonite resulted in a significant increase in dry matter yields in the field trial (Fig. 1b). Continuing work will optimise the sorber technology for improved environmental and agronomic performance across a range of soils (Vertosol, Dermosol in addition to Ferrosol and Sodosols) and environmental parameters (moisture, temperature, porosity, pH).

Clays Can Decrease Gaseous Nutrient Losses from Soil-Applied Livestock Manures

Clays could underpin a viable agricultural greenhouse gas (GHG) abatement technology given their affinity for nitrogen and carbon compounds. We provide the first investigation into the efficacy of clays to decrease agricultural nitrogen GHG emissions (i.e., N2O and NH3). Via laboratory experiments using an automated closed-vessel analysis system, we tested the capacity of two clays (vermiculite and bentonite) to decrease N2O and NH3 emissions and organic carbon losses from livestock manures (beef, pig, poultry, and egg layer) incorporated into an agricultural soil. Clay addition levels varied, with a maximum of 1:1 to manure (dry weight). Cumulative gas emissions were modeled using the biological logistic function, with 15 of 16 treatments successfully fitted (P < 0.05) by this model. When assessing all of the manures together, NH3 emissions were lower (×2) at the highest clay addition level compared with no clay addition, but this difference was not significant (P = 0.17). Nitrous oxide emissions were significantly lower (×3; P < 0.05) at the highest clay addition level compared with no clay addition. When assessing manures individually, we observed generally decreasing trends in NH3 and N2O emissions with increasing clay addition, albeit with widely varying statistical significance between manure types. Most of the treatments also showed strong evidence of increased C retention with increasing clay additions, with up to 10 times more carbon retained in treatments containing clay compared with treatments containing no clay. This preliminary assessment of the efficacy of clays to mitigate agricultural GHG emissions indicates strong promise.

A novel and effective technology for mitigating nitrous oxide emissions from land-applied manures

Land-applied manures produce nitrous oxide (N2O), a greenhouse gas (GHG). Land application can also result in ammonia (NH3) volatilisation, leading to indirect N2O emissions. Here, we summarise a glasshouse investigation into the potential for vermiculite, a clay with a high cation exchange capacity, to decrease N2O emissions from livestock manures (beef, pig, broiler, layer), as well as urea, applied to soils. Our hypothesis is that clays adsorb ammonium, thereby suppressing NH3 volatilisation and slowing N2O emission processes. We previously demonstrated the ability of clays to decrease emissions at the laboratory scale. In this glasshouse work, manure and urea application rates varied between 50 and 150 kg nitrogen (N)/ha. Clay : manure ratios ranged from 1 : 10 to 1 : 1 (dry weight basis). In the 1-year trial, the above-mentioned N sources were incorporated with vermiculite in 1 L pots containing Sodosol and Ferrosol growing a model pasture (Pennisetum clandestinum or kikuyu grass). Gas emissions were measured periodically by placing the pots in gas-tight bags connected to real-time continuous gas analysers. The vermiculite achieved significant (P ≤ 0.05) and substantial decreases in N2O emissions across all N sources (70% on average). We are currently testing the technology at the field scale; which is showing promising emission decreases (~50%) as well as increases (~20%) in dry matter yields. This technology clearly has merit as an effective GHG mitigation strategy, with potential associated agronomic benefits, although it needs to be verified by a cost–benefit analysis.

Mechanisms controlling the undrained strength behavior of remolded Ariake marine clays

The soft clay of Ariake Bay, in western Kyushu, Japan covers several hundred square kilometers. Ariake clay consists of the principal clay minerals namely, smectite, illite, kaolinite and vermiculite, and other minerals in lesser quantity. The percentage of the principal clay, mineral can vary significantly. The percent clay, size fraction and the salt concentration can also vary significantly. In view of the importance of undrained shear strength in geotechnical engineering practice, its behavior has been studied with respect to variation in salt concentration. Basically, two mechanisms control the undrained strength in clays, namely (a) cohesion or undrained strength is due to the net interparticle attractive forces, or (b) cohesion is due to the viscous nature of the double layer water. Concept (a) operates primarily for kaolinitic soil, and concept (b) dominates primarily for montmorillonitic soils. In Ariake clay, different clay minerals with different exchangeable cations and varying ion concentration in the pore water and varying nonclay size fraction are present. In view of this while both concepts (a) and (b) can coexist and operate simultaneously, one of the mechanisms dominates. For Isahaya clay, concept (a), factors responsible for an increase in level of flocculation and attractive forces result in higher undrained strength. Increase in salt concentration increases the remolded undrained strength at any moisture content. For Kubota and Kawazoe clays, concept (b) factors responsible for an expansion of diffuse double layer thickness, resulting in higher viscous resistance, increase the undrained shear strength, that is, as concentration decreases, the undrained strength increases at any moisture content.The liquid limit of Isahaya,a clay increases with increase in ion concentration and a marginal decrease is seen for both Kubota and Kawazoe clays, and their behavior has been explained satisfactorily,.

Avaliação do potencial leishmanicida e antibacteriano de Annona mucosa (Jacq.) - Annonaceae cultivada in vitro e in vivo

A biodiversidade brasileira abrange plantas de importância medicinal que podem ser utilizadas na formulação de novos fármacos. Contudo, tem sido reduzida em velocidade alarmante, em função de diferentes ações antrópicas. A cultura de tecidos vegetais propicia a conservação e uso do germoplasma permitindo a obtenção de substâncias de importância medicinal. As leishmanioses são consideradas um problema de saúde pública mundial sendo a espécie Leishmania braziliensis de maior importância epidemiológica no Brasil. Recentemente tem-se registrado aumento da resistência à linha de tratamento usual. Do mesmo modo, o uso indiscriminado de antibióticos levou ao aumento de bactérias multirresistentes, que representam sério risco de infecção. A espécie Annona mucosa (Jacq.) possui substâncias, como acetogeninas e alcaloides, que apresentam atividades antiparasitária e antimicrobiana. Nesse sentido, o objetivo do trabalho foi avaliar o potencial leishmanicida e antibacteriano de extratos de A. mucosa de material produzido in vitro e in vivo. Foi proposto um protocolo de germinação in vitro, ainda não reportada para a espécie, com vistas à obtenção de plântulas axênicas. Em meio WPM foram cultivados explantes hipocotiledonares e foliares em meio MS, suplementados com PIC e diferentes concentrações de KIN, BAP ou TDZ. Os calos obtidos foram cultivados em meio líquido de mesma composição para a produção de suspensões celulares. Os materiais foram submetidos à extração metanólica e posterior fracionamento em hexano e diclorometano. Para a avaliação da atividade dos extratos sobre L. braziliensis foi usado o modelo in vitro, com a forma promastigota, e in vivo na forma amastigota, a partir do tratamento de macrófagos peritoneais de camundongos infectados com o parasito. Ambas as formas foram tratadas com os extratos por 96 e 48h, respectivamente. A atividade antimicrobiana foi avaliada por macrodiluição do extrato em Mueller-Hinton, sendo avaliado o crescimento das cepas após 16h de incubação a 48C. A germinação in vitro da espécie foi alcançada em substrato vermiculita estéril umedecido com solução de sais do meio MS, com taxa média de 85%. A maior produção de calos friáveis foi obtida em meios contendo KIN, com potencial uso para cultivo em suspensões celulares. Os extratos do material in situ e in vitro apresentaram atividade leishmanicida, apesar da toxicidade para macrófagos. Culturas de células em suspensão apresentaram potencial leishmanicida in vitro e redução da infecção em macrófagos. Os extratos do material avaliado apresentaram atividade antimicrobiana seletiva, com inibição do crescimento de Streptococcus pyogenes e Bacillus thurigiensis em diferentes concentrações avaliadas. Os métodos biotecnológicos empregados permitiram a obtenção de materiais com propriedades medicinais para as atividades leishmanicida e antibacteriana, assim como o material in vivo, constituindo este estudo o primeiro relato para as atividades propostas em A. mucosa.

Produção de plantas e metabólitos de Cleome dendroides Schult. & Schult. f. (Cleomaceae) utilizando diferentes sistemas de cultivo in vitro

Cleome dendroides é uma espécie endêmica da Mata Atlântica dos estados do Rio de Janeiro e Espírito Santo, bioma alterado por intensa atividade antrópica, o que constitui uma ameaça à preservação de suas populações. Não existem estudos dos pontos de vista fisiológico, biotecnológico, fitoquímico ou farmacológico sobre a espécie. Considerando-se o perfil fitoquímico e o potencial medicinal do gênero, torna-se relevante definirem-se protocolos para a produção de plantas e metabólitos de C. dendroides utilizando diferentes sistemas de cultivo in vitro. No presente trabalho, foram realizados estudos sobre a germinação in vivo da espécie, avaliando-se a influência do substrato, temperatura e luz. Não se observou qualquer tipo de dormência, sendo as temperaturas de 20, 25 e 20-30C, em areia ou vermiculita, apropriadas para a germinação in vivo. Definiu-se também uma metodologia eficiente de germinação sob condições in vitro, e as plântulas obtidas foram utilizadas como fonte de explantes para os estudos de propagação in vitro. A resposta morfogênica foi avaliada considerando-se a origem e tipo do explante, tipos e concentrações de reguladores de crescimento e número de subculturas. A metodologia empregada mostrou-se eficiente para a produção de brotos e manutenção de estoques de plantas in vitro que serviram como fonte de explantes. A melhor condição para a propagação in vitro foi definida em meio solidificado contendo BA, independentemente do tipo de explante e da origem. Os brotos obtidos foram alongados, enraizados e aclimatizados. Também foi estabelecida a cultura de raízes e a regeneração de brotos a partir destas culturas. Avaliou-se o efeito da origem do explante, assim como dos tipos e concentrações de fitorreguladores sobre a proliferação de raízes e a regeneração de brotos. O fitorregulador AIB propiciou maior multiplicação das raízes, enquanto BA mostrou-se eficiente na regeneração de brotos a partir das raízes recém-formadas. Foi estabelecido ainda um protocolo de cultura de calos e de suspensões celulares. Avaliou-se o efeito da origem e do tipo de explante, dos tipos e das concentrações de fitorreguladores sobre a calogênese. A combinação de PIC com KIN foi a mais eficiente para a indução de calos em explantes de plântulas obtidas a partir de germinação in vitro, produzindo calos que foram mantidos por pelo menos dois anos. As suspensões celulares também foram estabelecidas em meio contendo PIC + KIN, mantendo uma produção de biomassa de cerca de cinco vezes o peso fresco inicial por três sucessivas subculturas. Análises histoquímicas e fitoquímicas revelaram a presença de alcaloides nos calos e nas suspensões celulares. Foram realizadas análises fitoquímicas de plantas de campo, plantas aclimatizadas, plantas mantidas em estoque in vitro e culturas de raízes, as quais indicaram a presença de derivados de glicosinolatos. Os resultados demonstraram a viabilidade de produção de material vegetal de C. dendroides por meio de métodos biotecnológicos e a produção in vitro de metabólitos de importância medicinal

Preparação, caracterização e avaliação de nanocompósitos de PBAT/amido de milho e vermiculita organofilizada

Nos últimos 20-30 anos polímeros biodegradáveis vêm sendo estudados e desenvolvidos e atualmente já são comercializados. Contudo, o custo, a processabilidade e algumas propriedades ainda dificultam a penetração desses polímeros no mercado e a competição com as chamadas commodities. Não são poucos os autores que se dedicam a desenvolver aditivos e formulações para superar essas limitações. Desta forma, esta Tese se dedicou ao desenvolvimento de compósitos de Ecobras, fabricado pela Basf e comercializado pela Corn Products, utilizando como carga mineral resíduo da extração da bauxita, no município de Santa Luzia/PB, o qual consiste em sua totalidade de vermiculita. Esta vermiculita foi quimicamente modificada com sais de alquil fosfônio para melhorar a compatibilidade com a matriz polimérica e também espaçar as camadas de aluminossilicato. De fato, a modificação com o brometo de hexadecil tributil fosfônio resultou na esfoliação da vermiculita tornando-a potencialmente apropriada para a obtenção de nanocompósitos. A preparação dos compósitos foi realizada pelo método de intercalação no estado fundido e foram comparadas a utilização da câmara interna de mistura e da mini extrusora de dupla rosca, sendo esta última mais eficaz na dispersão da vermiculita, conforme revelado pela microscopia eletrônica de varredura, difração de raios-X e reometria de placas. O grau de dispersão também foi influenciado pela estrutura química do modificador da vermiculita e pelo teor dessa carga incorporada à matriz. Teores mais elevados levaram a formação de aglomerados, enquanto a modificação da carga implicou na formação de micro e nanocompósitos. Ainda houve alterações das propriedades térmicas com aumento dos valores da temperatura de transição vítrea, de cristalização e fusão, embora o grau de cristalinidade tenha sido mantido. Nitidamente, foram obtidos materiais mais rígidos, com maior módulo e menor capacidade de deformação. Cerca de 58% de perda de massa foi observada para os micro e nanocompósitos obtidos após 17 semanas de enterro em solo simulado para avaliação da biodegradabilidade, valor bem próximo ao Ecobras puro. De modo geral, a incorporação das diferentes vermiculitas retardou nas primeiras semanas a biodegradação, provavelmente em função de modificações na estrutura cristalina, conforme sugerido pelos maiores valores de temperatura de fusão observados durante o acompanhamento do processo de biodegradação. No entanto, após 7 semanas os perfis de biodegradação dos micro e nanocompósitos se aproximaram bastante do Ecobras puro. Desta forma, foi possível nesta Tese obter um nanocompósito de Ecobras com vermiculita modificada com brometo de hexadecil fosfônio utilizando ferramentas comuns de processamento no estado fundido com biodegradabilidade próxima ao polímero de partida, porém mais rígido e menos deformável

Differentiate performance of eight filter media in vertical flow constructed wetland: Removal of organic matter, nitrogen and phosphorus

A comparative study was conducted to reveal the differentiate effects of eight different filter media including gravel, zeolites, anthracite, shale, vermiculite, ceramic filter media, blast furnace steel slag and round ceramsite. The study mainly related to the eight different filter media's removal performances of organic matter, nitrogen and phosphorus in the vertical flow constructed wetland simulated system, which treating wastewater at hydraulic loading rate of 1000-2500 mm/d. The results indicated that the removal effects were closely related to the physical and chemical properties of medium materials. Anthracite-filled system had the highest removal rate for the total organic carbon (TOC), up to 70%, and the removal rates of other systems ranged from 20% to 30%. As for the five-day biochemical oxygen demand (BOD5), anthracite-filled and steel slag-filled systems had the highest removal rates, also up to 70%, as well as other systems all exceeded 50%. At the same time, for the total nitrogen (TN) and NH4(+)-N, the zeolites-filled and ceramic-filled systems had the best performances with the removal rates of more than 70%, the other way round, the removal rates of other systems were only about 20%. The distinguishable effects were also observed in removal performances of total phosphorus (TP) and total dissoluble phosphorus (TDP). The removal rates of TP and TDP in steel slag-filled systems were more than 90%, a much higher value, followed by that of the anthracite-filled system, more than 60%, but those of other systems being the less. Our study provided a potential mechanism to optimize the filter media design for the vertical flow constructed wetlands.

Structural characterization and property of in-situ synthesized AZ91-Mg2Si composite

A new-type Mg2Si composite was prepared with Mg-9Al-1Zn (AZ91) alloy and vermiculite as raw materials by melt infiltration method. The results show that the microstructure of composite consists of a large amount Of Mg2Si precipitates and a little amount of MgO embedded in alpha-Mg matrix. The Vickers hardness of the composite is obviously higher than that of matrix of AZ91 alloy. Moreover, the composite exhibits excellent compressive property. The ultimate compressive strength of the material is 290 MPa, the yield strength is 175 MPa, and the elongation is about 5%, which are higher than those of AZ91 alloy.

东南极格罗夫山地区的土壤特征及其环境研究

The Grove Mountains, including 64 nunataks, is situated on an area about 3200km2 in the inland ice cap of east Antarctica in Princess Elizabeth land (72o20'-73°101S, 73°50'-75o40'E), between Zhongshan station and Dome A, about 450km away from Zhongshan station (69°22'S, 76°22'E). Many workers thought there was no pedogenesis in the areas because of the less precipitation and extreme lower temperature. However, during the austral summer in 1999-2000, the Chinaer 16 Antarctic expedition teams entered the inland East Antarctica and found three soil spots in the Southern Mount Harding, Grove Mountains, East Antarctica. It is the first case that soils are discovered in the inland in East Antarctica. Interestingly, the soils in this area show clay fraction migration, which is different from other cold desert soils. In addition, several moraine banks are discovered around the Mount Harding. The soil properties are discussed as below. Desert pavement commonly occurs on the three soil site surfaces, which is composed of pebbles and fragments formed slowly in typical desert zone. Many pebbles are subround and variegated. These pebbles are formed by abrasion caused by not only wind and wind selective transportation, but also salt weathering and thaw-freezing action on rocks. The wind blows the boulders and bedrocks with snow grains and small sands. This results in rock disintegration, paved on the soil surface, forming desert pavement, which protects the underground soil from wind-blow. The desert pavement is the typical feature in ice free zone in Antarctica. There developed desert varnish and ventifacts in this area. Rubification is a dominant process in cold desert Antarctic soils. In cold desert soils, rubification results in relatively high concentrations of Fed in soil profile. Stained depth increases progressively with time. The content of Fed is increasing up to surface in each profile. The reddish thin film is observed around the margin of mafic minerals such as biotite, hornblende, and magnetite in parent materials with the microscope analyzing on some soil profiles. So the Fed originates from the weathering of mafic minerals in soils. Accumulations of water-soluble salts, either as discrete horizons or dispersed within the soil, occur in the soil profiles, and the salt encrustations accumulate just beneath surface stones in this area. The results of X-ray diffraction analyses show that the crystalline salts consist of pentahydrite (MgSO4-5H2O), hexahydrite (MgSO4-6H2O), hurlbutite (CaBe2(PO4)2), bloedite (Na2Mg(S04)2-4H2O), et al., being mainly sulfate. The dominant cations in 1:5 soil-water extracts are Mg2+ and Na+, as well as Ca2+ and K+, while the dominant anion is SO42-, then NO3-, Cl- and HCO3-. There are white and yellowish sponge materials covered the stone underside surface, of which the main compounds are quartz (SiO2, 40.75%), rozenite (FeSOKkO, 37.39%), guyanaite (Cr2O3-1.5H2O, 9.30%), and starkeyite (MgSO4-4H2O, 12.56%). 4) The distribution of the clay fraction is related to the maximum content of moisture and salts. Clay fraction migration occurs in the soils, which is different from that of other cold desert soils. X-ray diffraction analyses show that the main clay minerals are illite, smectite, then illite-smectite, little kaolinite and veirniculite. Mica was changed to illite, even to vermiculite by hydration. Illite formed in the initial stage of weathering. The appearance of smectite suggests that it enriched in magnesium, but no strong eluviation, which belongs to cold and arid acid environment. 5) Three soil sites have different moisture. The effect moisture is in the form of little ice in site 1. There is no ice in site 2, and ice-cement horizon is 12 cm below the soil surface in site 3. Salt horizon is 5-10 cm up to the surface in Site 1 and Site 2, while about 26cm in site 3. The differentiation of the active layer and the permafrost are not distinct because of arid climate. The depth of active layer is about 10 cm in this area. Soils and Environment: On the basis of the characteristics of surface rocks, soil colors, horizon differentiation, salt in soils and soil depth, the soils age of the Grove Mountains is 0.5-3.5Ma. No remnants of glaciations are found on the soil sites of Mount Harding, which suggests that the Antarctic glaciations have not reached the soil sites since at least 0.5Ma, and the ice cap was not much higher than present, even during the Last Glacial Maximum. The average altitude of the contact line of level of blue ice and outcrop is 2050m, and the altitude of soil area is 2160m. The relative height deviation is about 110m, so the soils have developed and preserved until today. The parental material of the soils originated from alluvial sedimentary of baserocks nearby. Sporepollen were extracted from the soils, arbor pollen grains are dominant by Pinus and Betula, as well as a small amount Quercus, Juglans, Tilia and Artemisia etc. Judging from the shape and colour, the sporepollen group is likely attributed to Neogene or Pliocene in age. This indicates that there had been a warm period during the Neogene in the Grove Mountains, East Antarctica.

Effect of heating vermiculites on extractability of phosphorus and some essential plant micronutrients

The study assessed the effect of heating vermiculites on extractability of phosphorus, iron, zinc and manganese with respect to their potential agricultural use. Of these elements, phosphorus was from apatite and monazite that occur as accessory minerals in vermiculites. Vermiculites were heated at 15-800 degrees C and digested by acetic acid for extracting phosphorus and diethylene triamine pentaacetic acid (DTPA) for extracting zinc, iron and manganese. Phosphorus in the extract was analysed by a flow injection method while zinc, iron and manganese were measured by atomic absorption spectrometry. The results showed that heating vermiculites to 400 C enhanced extractability of phosphorus from apatite and monazite to a level of 335 mg kg(-1). Further heating to 800 degrees C reduced extractable phosphorus to less than 75 mg kg(-1). Maximum extractable zinc, iron and manganese found were 2.7, 19.1 and 22.9 mg kg(-1), respectively, values that are beneficial and tolerable by most plants. Thus, it was concluded that heating vermiculites to

Accessory minerals and potentially toxic elements in Tanzanian vermiculites with respect to agricultural applications

The study assessed accessory minerals and metals in Tanzanian vermiculites with respect to their potential suitability for agricultural applications. Mineral and chemical analyses were involved. Pot experiments were also conducted to assess plant uptake of metals from soil with vermiculites. Fibrous sepiolite and amphiboles were minerals of health concern found in some samples. The sepiolite fibers had aspect ratios similar to those of asbestos minerals, which cause respiratory disorders and lung cancer when inhaled and thus pose a potential health risk to animals and humans. The amphibole fibers were thicker than 10 μm and are unlikely to be inhaled. Chromium (Cr) and nickel (Ni) concentrations in some samples were greater than the limits permitted in agricultural soils, but the elements are not highly plant available and do not inhibit the uptake of essential macronutrients. Heating vermiculites at 400-600° C enhanced extractability of Cr and Ni and should preferably be avoided. © Taylor & Francis Group, LLC.

The effect of heating temperature on the properties of vermiculites from Tanzania with respect to potential agronomic applications

This study was carried out to assess the properties of vermiculites from Tanzania with respect to the temperature used to expand them. Vermiculites from five locations in the Mozambique Belt of Tanzania were sampled and heated at 15, 200, 400, 600 and 800 °C in a muffle furnace. Palabora Europe Ltd provided one sample for comparison from their South Africa deposit which provides vermiculite used worldwide as a soil amendment. Water release characteristic, cation exchange capacity, pH, mass loss, and bulk density were among the properties assessed. All six vermiculites responded differently on heating, and had a significant variation in their agronomic properties. Water release characteristic varied with the degree of exfoliation and phase composition. Although vermiculites from Tanzania expanded on heating, their capacity to retain plant available water was relatively low as compared to vermiculite from Palabora. Disintegration on heating and the presence of a high amount of iron could be among the factors affecting their water release characteristic. Loss of hydroxyl water was higher in vermiculites than in hydrobiotites. Dehydroxylation enhanced the availability of exchangeable K⁺ and reduced significantly the cation exchange capacity of vermiculites. The optimum exchangeable K⁺ was obtained on heating at a temperature of 600 °C. The pH was unaffected by heating to a temperature of less than 600 °C. At higher temperature, the pH increased in some samples and was accompanied by substantial amounts of exchangeable Mg²⁺. Thus, it was concluded that initial characterization of vermiculites is essential prior to potential agricultural applications in order to optimize their agronomic potential. © 2008 Elsevier B.V. All rights reserved.