Educational value of different types of exhibits in an interactive science and technology center

This study analyzes the short-term consequences of visitors' use of different types of exhibits (i.e., "exemplars of phenomena" and "analogy based") together with the factors affecting visitors' understanding of and their evaluation of the use of such exhibits. One hundred and twenty five visitors (either alone or in groups) were observed during their interaction and interviewed immediately afterwards. Findings suggest that the type of exhibit constrains the nature of the understanding achieved. The use of analogical reasoning may lead to an intended causal explanation of an exhibit that is an exemplar of a phenomenon, but visitors often express misconceptions as a consequence of using this type of exhibit. Analogy-based exhibits are often not used as intended by the designer. This may be because visitors do not access the source domain intended; are unaware of the use of analogy per se (in particular, when the exhibit is of the subtype "only showing similarities between relationships"); only acquire fragmentary knowledge about the target; or fail to use analogical reasoning of which they were capable. Furthermore, exhibits related to everyday world situations are recognized to have an immediate educative value for visitors. Suggestions for enhancing the educative value of exhibits are proposed.

Employing knowledge networks as tools for the development of Caribbean Small Island Developing States

Expertise, skills, experiences, understandings and capabilities (knowledge) aid development, not just by informing decision-making, but also by providing ideas for actions and activities that can be taken. Due to their size, and economic and environmental vulnerabilities, Caribbean Small Island developing States (SIDS) faces special challenges when working towards their economic, social and environmental development goals. These challenges have contributed to the creation of knowledge gaps, and that which is already available is located in isolated pockets, throughout the Caribbean. Migration of skilled persons compounds the issue, thereby removing much needed knowledge to beyond the traditional borders of the Caribbean. It is necessary to find ways to connect these dispersed knowledge resources. Knowledge networks are tools that can connect the existing skills, expertise, experiences and understandings accessible and create new ones to move towards greater development in the Caribbean. The purpose of this paper is to explore and highlight the role that knowledge networks can play as an aid in the development of Caribbean SIDS. It offers, with Caribbean examples, definitions and discussions of the components, types, and the advantages and disadvantages they hold for the subregion. The paper goes further to provide some ideas on assembling and analysing the different types of knowledge networks. It concludes with a few recommendations geared toward improving the availability of knowledge in the Caribbean.

Hyphessobrycon uaiso: new characid fish from the rio Grande, upper rio Paraná basin, Minas Gerais State (Ostariophysi: Characidae), with a brief comment about some types of Hyphessobrycon

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Violence against children and adolescents: the importance of knowledge of the spectrum of bruise colors in its diagnosis

Introduction: One of the violence types more observed against children is the physical abuse, which produces many types of traumatic injuries. Contusions are common trauma signs and may indicate aggression when frequently present in locations where accidental injuries are rare. Contusions in skin undergo color changes with the passage of time, and such change in color is called “spectrum of bruise colors of Legrand du Saulle”. Thus, it is possible to estimate the age of the lesion based on the evaluation of color. Injuries caused by child abuse often reach regions of head, face and neck, because they are exposed and easily accessible. Therefore, the dentist is responsible with regard to the diagnosis and the actions to be undertaken against the cases of child abuse. Objective: To present and discuss the significance of the spectrum of bruise colors as a considerable visible trace in suspicion of violence against children and adolescents, during dentists’ clinical routine. Literature review: The study of the “spectrum of bruise colors of Legrand du Saulle” refers to the estimation of the age of the injury, in respect to the color change. The application of this study is of great value for identify if a lesion occurred from a single incident or from multiple incidents, especially in cases where it occurs in the same region of the body, indicative of repetitive trauma. Conclusion: The spectrum of bruise colors is very important for health professionals, such as dentists, for the identification or suspicion of cases of abuse against children and adolescents. As great part of the lesions originated of abuse involve the areas of head and neck, it is unacceptable that these professionals are unaware of the basic signs to help in early diagnosis, which is the case of the colors of the lesions. However, concerning the chronology of the spectrum of bruise colors, it is not possible to establish rigorous times.

Social Work Students’ Use of Knowledge in Direct Practice – Reasons, Strategies and Effects

This article describes a study of Swedish social work students’ use of knowledge during their field practice. Data was collected by using short written narratives, where the students reflect on situations from practice, situations they experienced as critical or problematic. The narratives were analysed with a method inspired by the interpretation theory of Paul Ricoeur. The article starts with a discussion adhering to the present trend of evidence-based social work practice. This is followed by a study of 144 narratives from social work students containing critical or problematic events. A quantitative description of the material as well as qualitative model of two type-strategies, that social work students use, is presented. The results show, among other things, that students use several forms of knowledge, where facts/evidence is one of several. The study also shows that there is a strong adaptation to varying critical situations. A conclusion is that it is difficult to a priori define the types and proportions of knowledge to use in social work practice.

Meeting the Challenges of Transdisciplinary Knowledge Production for Sustainable Water Governance

Increasing pressure on mountain water resources is making it necessary to address water governance issues in a transdisciplinary way. This entails drawing on different disciplinary perspectives, different types of knowledge, and different interests to answer complex governance questions. This study identifies strategies for addressing specific challenges to transdisciplinary knowledge production aiming at sustainable and reflective water governance. The study draws on the experiences of 5 large transdisciplinary water governance research projects conducted in Austria and Switzerland (Alp-Water-Scarce, MontanAqua, Drought-CH, Sustainable Water Infrastructure Planning, and an integrative river management project in the Kamp Valley). Experiences were discussed and systematically analyzed in a workshop and subsequent interviews. These discussions identified 4 important challenges to interactions between scientists and stakeholders—ensuring stakeholder legitimacy, encouraging participation, managing expectations, and preventing misuse of data and research results—and explored strategies used by the projects to meet them. Strategies ranged from key points to be considered in stakeholder selection to measures that enhance trustful relationships and create commitment.

An investigation into the use of knowledge representation in computer-integrated manufacturing

In a certain automobile factory, batch-painting of the body types in colours is controlled by an allocation system. This tries to balance production with orders, whilst making optimally-sized batches of colours. Sequences of cars entering painting cannot be optimised for easy selection of colour and batch size. `Over-production' is not allowed, in order to reduce buffer stocks of unsold vehicles. Paint quality is degraded by random effects. This thesis describes a toolkit which supports IKBS in an object-centred formalism. The intended domain of use for the toolkit is flexible manufacturing. A sizeable application program was developed, using the toolkit, to test the validity of the IKBS approach in solving the real manufacturing problem above, for which an existing conventional program was already being used. A detailed statistical analysis of the operating circumstances of the program was made to evaluate the likely need for the more flexible type of program for which the toolkit was intended. The IKBS program captures the many disparate and conflicting constraints in the scheduling knowledge and emulates the behaviour of the program installed in the factory. In the factory system, many possible, newly-discovered, heuristics would be awkward to represent and it would be impossible to make many new extensions. The representation scheme is capable of admitting changes to the knowledge, relying on the inherent encapsulating properties of object-centres programming to protect and isolate data. The object-centred scheme is supported by an enhancement of the `C' programming language and runs under BSD 4.2 UNIX. The structuring technique, using objects, provides a mechanism for separating control of expression of rule-based knowledge from the knowledge itself and allowing explicit `contexts', within which appropriate expression of knowledge can be done. Facilities are provided for acquisition of knowledge in a consistent manner.

The application of knowledge based expert systems to mechanical engineering design

Investigation of the different approaches used by Expert Systems researchers to solve problems in the domain of Mechanical Design and Expert Systems was carried out. The techniques used for conventional formal logic programming were compared with those used when applying Expert Systems concepts. A literature survey of design processes was also conducted with a view to adopting a suitable model of the design process. A model, comprising a variation on two established ones, was developed and applied to a problem within what are described as class 3 design tasks. The research explored the application of these concepts to Mechanical Engineering Design problems and their implementation on a microcomputer using an Expert System building tool. It was necessary to explore the use of Expert Systems in this manner so as to bridge the gap between their use as a control structure and for detailed analytical design. The former application is well researched into and this thesis discusses the latter. Some Expert System building tools available to the author at the beginning of his work were evaluated specifically for their suitability for Mechanical Engineering design problems. Microsynics was found to be the most suitable on which to implement a design problem because of its simple but powerful Semantic Net Knowledge Representation structure and the ability to use other types of representation schemes. Two major implementations were carried out. The first involved a design program for a Helical compression spring and the second a gearpair system design. Two concepts were proposed in the thesis for the modelling and implementation of design systems involving many equations. The method proposed enables equation manipulation and analysis using a combination of frames, semantic nets and production rules. The use of semantic nets for purposes other than for psychology and natural language interpretation, is quite new and represents one of the major contributions to knowledge by the author. The development of a purpose built shell program for this type of design problems was recommended as an extension of the research. Microsynics may usefully be used as a platform for this development.

Capability development in Chinese manufacturing:a quasi-biotic perspective of knowledge evolution

A quasi-biotic model of knowledge evolution has been applied to manufacturing technology capability development which includes product design and development and manufacturing process/workflow improvement. The concepts of “knowledge genes” and “knowledge body” are introduced to explain the evolution of technological capability. It is shown that knowledge development within the enterprise happens as a result of interactions between an enterprise’s internal knowledge and that acquired from external sources catalysed by: (a) internal mechanisms, recources and incentives, and (b) actions and policies of external agencies. A matrix specifying factors contributing to knowledge development and types of manufacturing capabilities (product design, equipment development or use, and workflow) is developed to explain technological knowledge development. The case studies of Tianjin Pipe Corporation (TPCO) and Tianjin Tianduan Press Co. are presented to illustrate the application of the matrix.

Understanding inter-firm networks and types of innovation in SMEs:a social network perspective

Innovation is one of the key drivers for gaining competitive advantages in any firms. Understanding knowledge transfer through inter-firm networks and its effects on types of innovation in SMEs is very important in improving SMEs innovation. This study examines relationships between characteristics of inter-firm knowledge transfer networks and types of innovation in SMEs. To achieve this, social network perspective is adopted to understand inter-firm knowledge transfer networks and its impact on innovation by investigating how and to what extend ego network characteristics are affecting types of innovation. Therefore, managers can develop the firms'network according to their strategies and requirements. First, a conceptual model and research hypotheses are proposed to establish the possible relationship between network properties and types of innovation. Three aspects of ego network are identified and adopted for hypotheses development: 1) structural properties which address the potential for resources and the context for the flow of resources, 2) relational properties which reflect the quality of resource flows, and 3) nodal properties which are about quality and variety of resources and capabilities of the ego partners. A questionnaire has been designed based on the hypotheses. Second, semistructured interviews with managers of five SMEs have been carried out, and a thematic qualitative analysis of these interviews has been performed. The interviews helped to revise the questionnaire and provided preliminary evidence to support the hypotheses. Insights from the preliminary investigation also helped to develop research plan for the next stage of this research.

The role of market knowledge in recognizing and exploiting entrepreneurial opportunities in technology intensive firms

Entrepreneurial opportunity recognition is an increasingly prevalent phenomenon. Of particular interest is the ability of promising technology based ventures to recognize and exploit opportunities. Recent research drawing on the Austrian economic theory emphasizes the importance of knowledge, particularly market knowledge, behind opportunity recognition. While insightful, this research has tended to overlook those interrelationships that exist between different types of knowledge (technology and market knowledge) as well as between a firm’s knowledge base and its entrepreneurial orientation. Additional shortfalls of prior research include the ambiguous definitions provided for entrepreneurial opportunities, oversight of opportunity exploitation with an extensive focus on opportunity recognition only, and the lack of quantitative, empirical evidence on entrepreneurial opportunity recognition. ^ In this dissertation, these research gaps are addressed by integrating Schumpeterian opportunity development view with a Kirznerian opportunity discovery theory as well as insights from literature on entrepreneurial orientation. A sample of 85 new biotechnology ventures from the United States, Finland, and Sweden was analyzed. While leaders in all 85 companies were interviewed for the research in 2003-2004, 42 firms provided data in 2007. Data was analyzed using regression analysis. ^ The results show the value and importance of early market knowledge and technology knowledge as well as an entrepreneurial company posture for subsequent opportunity recognition. The highest numbers of new opportunities are recognized in firms where high levels of market knowledge are combined with high levels of technology knowledge (measured with a number of patents). A firm’s entrepreneurial orientation also enhances its opportunity recognition. Furthermore, the results show that new ventures with more market knowledge are able to gather more equity investments, license out more technologies, and achieve higher sales than new ventures with lower levels of market knowledge. Overall, the findings of this dissertation help further our understanding of the sources of entrepreneurial opportunities, and should encourage further research in this area. ^

The role of market knowledge in recognizing and exploiting entrepreneurial opportunities in technology intensive firms

Entrepreneurial opportunity recognition is an increasingly prevalent phenomenon. Of particular interest is the ability of promising technology based ventures to recognize and exploit opportunities. Recent research drawing on the Austrian economic theory emphasizes the importance of knowledge, particularly market knowledge, behind opportunity recognition. While insightful, this research has tended to overlook those interrelationships that exist between different types of knowledge (technology and market knowledge) as well as between a firm’s knowledge base and its entrepreneurial orientation. Additional shortfalls of prior research include the ambiguous definitions provided for entrepreneurial opportunities, oversight of opportunity exploitation with an extensive focus on opportunity recognition only, and the lack of quantitative, empirical evidence on entrepreneurial opportunity recognition. In this dissertation, these research gaps are addressed by integrating Schumpeterian opportunity development view with a Kirznerian opportunity discovery theory as well as insights from literature on entrepreneurial orientation. A sample of 85 new biotechnology ventures from the United States, Finland, and Sweden was analyzed. While leaders in all 85 companies were interviewed for the research in 2003-2004, 42 firms provided data in 2007. Data was analyzed using regression analysis. The results show the value and importance of early market knowledge and technology knowledge as well as an entrepreneurial company posture for subsequent opportunity recognition. The highest numbers of new opportunities are recognized in firms where high levels of market knowledge are combined with high levels of technology knowledge (measured with a number of patents). A firm’s entrepreneurial orientation also enhances its opportunity recognition. Furthermore, the results show that new ventures with more market knowledge are able to gather more equity investments, license out more technologies, and achieve higher sales than new ventures with lower levels of market knowledge. Overall, the findings of this dissertation help further our understanding of the sources of entrepreneurial opportunities, and should encourage further research in this area.

Knowledge about sources of dietary fibres and health effects using a validated scale: a cross-country study

Objectives Dietary fibre (DF) is one of the components of diet that strongly contributes to health improvements, particularly on the gastrointestinal system. Hence, this work intended to evaluate the relations between some sociodemographic variables such as age, gender, level of education, living environment or country on the levels of knowledge about dietary fibre (KADF), its sources and its effects on human health, using a validated scale. Study design The present study was a cross-sectional study. Methods A methodological study was conducted with 6010 participants, residing in 10 countries from different continents (Europe, America, Africa). The instrument was a questionnaire of self-response, aimed at collecting information on knowledge about food fibres. The instrument was used to validate a scale (KADF) which model was used in the present work to identify the best predictors of knowledge. The statistical tools used were as follows: basic descriptive statistics, decision trees, inferential analysis (t-test for independent samples with Levene test and one-way ANOVA with multiple comparisons post hoc tests). Results The results showed that the best predictor for the three types of knowledge evaluated (about DF, about its sources and about its effects on human health) was always the country, meaning that the social, cultural and/or political conditions greatly determine the level of knowledge. On the other hand, the tests also showed that statistically significant differences were encountered regarding the three types of knowledge for all sociodemographic variables evaluated: age, gender, level of education, living environment and country. Conclusions The results showed that to improve the level of knowledge the actions planned should not be delineated in general as to reach all sectors of the populations, and that in addressing different people, different methodologies must be designed so as to provide an effective health education.

Types of embedded ties in buyer-supplier relationships and their combined effects on innovation performance

[EN] Purpose of the paper - This research analyzes the impact of three types of embedded ties, namely, specialized complementary resources, idiosyncratic investments, and knowledge sharing, on the innovation capacity of the firms. We also study the particularities of the Machine-Tool industry. Theoretical background – Our evaluation of the embedded buyer-supplier ties is based on the potential sources of relational rents proposed by Dyer and Sing (1998). We also draw on Uzzi and Lancaster (2003), Noordhoff et al. (2011), among others, to discuss the positive and negative aspects of embedded ties. Design/Methodology/Approach ‐ Using data from a survey of 202 European machine-tool firms acting as buyers and sellers, we propose and evaluate a Structural Equation model. Findings ‐ Only knowledge-sharing routines exert a significant positive effect on product innovation performance. Neither an increase in the idiosyncratic investments nor in complementary resources and capabilities enhance innovation performance. Also, knowledge-sharing routines mediate in the effect from idiosyncratic investments on innovation performance. Research Limitations. ‐ The machine tool industry has unique characteristics that make this generalization difficult. Also, there is considerable difficulty associated with testing more deeply the interrelations among these embedded ties in the long run. It is plausible to understand that these interrelations operate within a gradual process. Originality/Value/Contribution of Paper ‐ This research contributes to a better understanding of the role of embedded ties on innovativeness. To the best of our knowledge, there is no previous international empirical research analyzing the mediation effects among specialized complementary resources, idiosyncratic investments and knowledge sharing, and their effects on the innovation capacity of firms.

Phytochemical Markers Of Different Types Of Red Propolis.

Propolis is a resin that bees collect from different plant sources and use in the defense of the bee community. The intricate composition of propolis varies depending on plant sources from different geographic regions and many types have been reported. Red coloured propolis found in several states in Brazil and in other countries has known antimicrobial and antioxidant activity. Different analytical methods have been applied to studies regarding the chemical composition and plant origins of red propolis. In this study samples of red propolis from different regions have been characterised using direct infusion electrospray ionisation mass spectrometry (ESI(-)-MS) fingerprinting. Data from the fingerprints was extracted and analysed by multivariate analysis to group the samples according to their composition and marker compounds. Despite similar colour, the red coloured propolis samples were divided into three groups due to contrasting chemical composition, confirming the need to properly characterise the chemical composition of propolis.