918 resultados para Trial and error
Resumo:
When individuals learn by trial-and-error, they perform randomly chosen actions and then reinforce those actions that led to a high payoff. However, individuals do not always have to physically perform an action in order to evaluate its consequences. Rather, they may be able to mentally simulate actions and their consequences without actually performing them. Such fictitious learners can select actions with high payoffs without making long chains of trial-and-error learning. Here, we analyze the evolution of an n-dimensional cultural trait (or artifact) by learning, in a payoff landscape with a single optimum. We derive the stochastic learning dynamics of the distance to the optimum in trait space when choice between alternative artifacts follows the standard logit choice rule. We show that for both trial-and-error and fictitious learners, the learning dynamics stabilize at an approximate distance of root n/(2 lambda(e)) away from the optimum, where lambda(e) is an effective learning performance parameter depending on the learning rule under scrutiny. Individual learners are thus unlikely to reach the optimum when traits are complex (n large), and so face a barrier to further improvement of the artifact. We show, however, that this barrier can be significantly reduced in a large population of learners performing payoff-biased social learning, in which case lambda(e) becomes proportional to population size. Overall, our results illustrate the effects of errors in learning, levels of cognition, and population size for the evolution of complex cultural traits. (C) 2013 Elsevier Inc. All rights reserved.
Resumo:
Abstract
Resumo:
The antihypertensive effects of the beta-blocking agent betaxolol and the calcium entry blocker verapamil were compared in a crossover single-blind trial. Seventeen patients with uncomplicated essential hypertension took either betaxolol or a slow-release formulation of verapamil for two consecutive 6-week periods. The sequence of treatment phases was randomly allocated and a 2-week washout period preceded each treatment. The antihypertensive effect of the test drugs was assessed both at the physician's office and during everyday activities using a portable blood pressure recorder. The crossover design of the trial made it possible to evaluate the antihypertensive efficacy of betaxolol and verapamil both in the group as a whole and in the individual patient. The individual patient response to one of these agents was not a reliable indicator of the same patient's response to the alternative agent. Betaxolol brought both office and ambulatory recorded blood pressures under control in a larger fraction of patients than verapamil, although the magnitude of the blood pressure fall in the responders was equal for each drug. These observations stress the need for an individualized approach to the evaluation of antihypertensive therapy. The present results also demonstrate that optimal antihypertensive therapy is still a matter of trial and error. The precise methodology that ought to characterize crossover trials may make it possible to improve the therapeutic approach to hypertensive patients.
Resumo:
Event-related potentials were recorded from 10-year-old children and young adults in order to examine the developmental dififerences in two frontal lobe functions: detection of novel stimuli during an auditory novelty oddball task, and error detection during a visual flanker task. All participants showed a parietally-maximal P3 in response to auditory stimuli. In children, novel stimuli generated higher P3 amplitudes at the frontal site compared with target stimuli, whereas target stimuli generated higher P3 amplitudes at the parietal site compared with novel stimuli. Adults, however, had higher P3 amplitude to novel tones compared with target tones at each site. Children also had greater P3 amplitude at more parietal sites than adults during the novelty oddball and flanker tasks. Furthermore, children and adults did not show a significant reduction in P3 amplitude from the first to second novel stimulus presentation. No age differences were found with respect to P3 latency to novel and target stimuli. These findings suggest that the detection of novel and target stimuli is mature in 10-year-olds. Error trials typically elicit a negative ERP deflection (the ERN) with a frontal-central scalp distribution that may reflect response monitoring. There is also evidence of a positive ERP peak (the Pe) with a posterior scalp distribution which may reflect subjective recognition of a response. Both children and adults showed an ERN and Pe maximal at frontal-central sites. Children committed more errors, had smaller ERN across sites, and had a larger Pe at the parietal site than adults. This suggests that response monitoring is still immature in 10-year-olds whereas recognition of and emotional responses to errors may be similar in children and adults.
Resumo:
April 16, 1814. Printed by order of the Senate of the United States.
Resumo:
Printed by Roger C. Weightman
Resumo:
Salient pole brushless alternators coupled to IC engines are extensively used as stand-by power supply units for meeting in- dustrial power demands. Design of such generators demands high power to weight ratio, high e ciency and low cost per KVA out- put. Moreover, the performance characteristics of such machines like voltage regulation and short circuit ratio (SCR) are critical when these machines are put into parallel operation and alterna- tors for critical applications like defence and aerospace demand very low harmonic content in the output voltage. While designing such alternators, accurate prediction of machine characteristics, including total harmonic distortion (THD) is essential to mini- mize development cost and time. Total harmonic distortion in the output voltage of alternators should be as low as possible especially when powering very sophis- ticated and critical applications. The output voltage waveform of a practical AC generator is replica of the space distribution of the ux density in the air gap and several factors such as shape of the rotor pole face, core saturation, slotting and style of coil disposition make the realization of a sinusoidal air gap ux wave impossible. These ux harmonics introduce undesirable e ects on the alternator performance like high neutral current due to triplen harmonics, voltage distortion, noise, vibration, excessive heating and also extra losses resulting in poor e ciency, which in turn necessitate de-rating of the machine especially when connected to non-linear loads. As an important control unit of brushless alternator, the excitation system and its dynamic performance has a direct impact on alternator's stability and reliability. The thesis explores design and implementation of an excitation i system utilizing third harmonic ux in the air gap of brushless al- ternators, using an additional auxiliary winding, wound for 1=3rd pole pitch, embedded into the stator slots and electrically iso- lated from the main winding. In the third harmonic excitation system, the combined e ect of two auxiliary windings, one with 2=3rd pitch and another third harmonic winding with 1=3rd pitch, are used to ensure good voltage regulation without an electronic automatic voltage regulator (AVR) and also reduces the total harmonic content in the output voltage, cost e ectively. The design of the third harmonic winding by analytic methods demands accurate calculation of third harmonic ux density in the air gap of the machine. However, precise estimation of the amplitude of third harmonic ux in the air gap of a machine by conventional design procedures is di cult due to complex geome- try of the machine and non-linear characteristics of the magnetic materials. As such, prediction of the eld parameters by conven- tional design methods is unreliable and hence virtual prototyping of the machine is done to enable accurate design of the third har- monic excitation system. In the design and development cycle of electrical machines, it is recognized that the use of analytical and experimental methods followed by expensive and in exible prototyping is time consum- ing and no longer cost e ective. Due to advancements in com- putational capabilities over recent years, nite element method (FEM) based virtual prototyping has become an attractive al- ternative to well established semi-analytical and empirical design methods as well as to the still popular trial and error approach followed by the costly and time consuming prototyping. Hence, by virtually prototyping the alternator using FEM, the important performance characteristics of the machine are predicted. Design of third harmonic excitation system is done with the help of results obtained from virtual prototype of the machine. Third harmonic excitation (THE) system is implemented in a 45 KVA ii experimental machine and experiments are conducted to validate the simulation results. Simulation and experimental results show that by utilizing third harmonic ux in the air gap of the ma- chine for excitation purposes during loaded conditions, triplen harmonic content in the output phase voltage is signi cantly re- duced. The prototype machine with third harmonic excitation system designed and developed based on FEM analysis proved to be economical due to its simplicity and has the added advan- tage of reduced harmonics in the output phase voltage.
Resumo:
The aim of this paper is the numerical treatment of a boundary value problem for the system of Stokes' equations. For this we extend the method of approximate approximations to boundary value problems. This method was introduced by V. Maz'ya in 1991 and has been used until now for the approximation of smooth functions defined on the whole space and for the approximation of volume potentials. In the present paper we develop an approximation procedure for the solution of the interior Dirichlet problem for the system of Stokes' equations in two dimensions. The procedure is based on potential theoretical considerations in connection with a boundary integral equations method and consists of three approximation steps as follows. In a first step the unknown source density in the potential representation of the solution is replaced by approximate approximations. In a second step the decay behavior of the generating functions is used to gain a suitable approximation for the potential kernel, and in a third step Nyström's method leads to a linear algebraic system for the approximate source density. For every step a convergence analysis is established and corresponding error estimates are given.
Resumo:
Low-power medium access control (MAC) protocols used for communication of energy constraint wireless embedded devices do not cope well with situations where transmission channels are highly erroneous. Existing MAC protocols discard corrupted messages which lead to costly retransmissions. To improve transmission performance, it is possible to include an error correction scheme and transmit/receive diversity. It is possible to add redundant information to transmitted packets in order to recover data from corrupted packets. It is also possible to make use of transmit/receive diversity via multiple antennas to improve error resiliency of transmissions. Both schemes may be used in conjunction to further improve the performance. In this study, the authors show how an error correction scheme and transmit/receive diversity can be integrated in low-power MAC protocols. Furthermore, the authors investigate the achievable performance gains of both methods. This is important as both methods have associated costs (processing requirements; additional antennas and power) and for a given communication situation it must be decided which methods should be employed. The authors’ results show that, in many practical situations, error control coding outperforms transmission diversity; however, if very high reliability is required, it is useful to employ both schemes together.
Resumo:
Background Cognitive–behavioural therapy (CBT) for childhood anxiety disorders is associated with modest outcomes in the context of parental anxiety disorder. Objectives This study evaluated whether or not the outcome of CBT for children with anxiety disorders in the context of maternal anxiety disorders is improved by the addition of (i) treatment of maternal anxiety disorders, or (ii) treatment focused on maternal responses. The incremental cost-effectiveness of the additional treatments was also evaluated. Design Participants were randomised to receive (i) child cognitive–behavioural therapy (CCBT); (ii) CCBT with CBT to target maternal anxiety disorders [CCBT + maternal cognitive–behavioural therapy (MCBT)]; or (iii) CCBT with an intervention to target mother–child interactions (MCIs) (CCBT + MCI). Setting A NHS university clinic in Berkshire, UK. Participants Two hundred and eleven children with a primary anxiety disorder, whose mothers also had an anxiety disorder. Interventions All families received eight sessions of individual CCBT. Mothers in the CCBT + MCBT arm also received eight sessions of CBT targeting their own anxiety disorders. Mothers in the MCI arm received 10 sessions targeting maternal parenting cognitions and behaviours. Non-specific interventions were delivered to balance groups for therapist contact. Main outcome measures Primary clinical outcomes were the child’s primary anxiety disorder status and degree of improvement at the end of treatment. Follow-up assessments were conducted at 6 and 12 months. Outcomes in the economic analyses were identified and measured using estimated quality-adjusted life-years (QALYs). QALYS were combined with treatment, health and social care costs and presented within an incremental cost–utility analysis framework with associated uncertainty. Results MCBT was associated with significant short-term improvement in maternal anxiety; however, after children had received CCBT, group differences were no longer apparent. CCBT + MCI was associated with a reduction in maternal overinvolvement and more confident expectations of the child. However, neither CCBT + MCBT nor CCBT + MCI conferred a significant post-treatment benefit over CCBT in terms of child anxiety disorder diagnoses [adjusted risk ratio (RR) 1.18, 95% confidence interval (CI) 0.87 to 1.62, p = 0.29; adjusted RR CCBT + MCI vs. control: adjusted RR 1.22, 95% CI 0.90 to 1.67, p = 0.20, respectively] or global improvement ratings (adjusted RR 1.25, 95% CI 1.00 to 1.59, p = 0.05; adjusted RR 1.20, 95% CI 0.95 to 1.53, p = 0.13). CCBT + MCI outperformed CCBT on some secondary outcome measures. Furthermore, primary economic analyses suggested that, at commonly accepted thresholds of cost-effectiveness, the probability that CCBT + MCI will be cost-effective in comparison with CCBT (plus non-specific interventions) is about 75%. Conclusions Good outcomes were achieved for children and their mothers across treatment conditions. There was no evidence of a benefit to child outcome of supplementing CCBT with either intervention focusing on maternal anxiety disorder or maternal cognitions and behaviours. However, supplementing CCBT with treatment that targeted maternal cognitions and behaviours represented a cost-effective use of resources, although the high percentage of missing data on some economic variables is a shortcoming. Future work should consider whether or not effects of the adjunct interventions are enhanced in particular contexts. The economic findings highlight the utility of considering the use of a broad range of services when evaluating interventions with this client group. Trial registration Current Controlled Trials ISRCTN19762288. Funding This trial was funded by the Medical Research Council (MRC) and Berkshire Healthcare Foundation Trust and managed by the National Institute for Health Research (NIHR) on behalf of the MRC–NIHR partnership (09/800/17) and will be published in full in Health Technology Assessment; Vol. 19, No. 38.
Resumo:
We estimate the conditions for detectability of two planets in a 2/1 mean-motion resonance from radial velocity data, as a function of their masses, number of observations and the signal-to-noise ratio. Even for a data set of the order of 100 observations and standard deviations of the order of a few meters per second, we find that Jovian-size resonant planets are difficult to detect if the masses of the planets differ by a factor larger than similar to 4. This is consistent with the present population of real exosystems in the 2/1 commensurability, most of which have resonant pairs with similar minimum masses, and could indicate that many other resonant systems exist, but are currently beyond the detectability limit. Furthermore, we analyze the error distribution in masses and orbital elements of orbital fits from synthetic data sets for resonant planets in the 2/1 commensurability. For various mass ratios and number of data points we find that the eccentricity of the outer planet is systematically overestimated, although the inner planet`s eccentricity suffers a much smaller effect. If the initial conditions correspond to small-amplitude oscillations around stable apsidal corotation resonances, the amplitudes estimated from the orbital fits are biased toward larger amplitudes, in accordance to results found in real resonant extrasolar systems.
Resumo:
Workplace accidents involving machines are relevant for their magnitude and their impacts on worker health. Despite consolidated critical statements, explanation centered on errors of operators remains predominant with industry professionals, hampering preventive measures and the improvement of production-system reliability. Several initiatives were adopted by enforcement agencies in partnership with universities to stimulate production and diffusion of analysis methodologies with a systemic approach. Starting from one accident case that occurred with a worker who operated a brake-clutch type mechanical press, the article explores cognitive aspects and the existence of traps in the operation of this machine. It deals with a large-sized press that, despite being endowed with a light curtain in areas of access to the pressing zone, did not meet legal requirements. The safety devices gave rise to an illusion of safety, permitting activation of the machine when a worker was still found within the operational zone. Preventive interventions must stimulate the tailoring of systems to the characteristics of workers, minimizing the creation of traps and encouraging safety policies and practices that replace judgments of behaviors that participate in accidents by analyses of reasons that lead workers to act in that manner.
Resumo:
The objective of this article is to apply the Design of Experiments technique along with the Discrete Events Simulation technique in an automotive process. The benefits of the design of experiments in simulation include the possibility to improve the performance in the simulation process, avoiding trial and error to seek solutions. The methodology of the conjoint use of Design of Experiments and Computer Simulation is presented to assess the effects of the variables and its interactions involved in the process. In this paper, the efficacy of the use of process mapping and design of experiments on the phases of conception and analysis are confirmed.