Fungos endofíticos: prospecção de atividade biocatalítica e aplicação biotecnológica

Pós-graduação em Biotecnologia - IQ

Experimental investigation of the fuel properties of glidfuel, palm oil mill effluent biodiesel and blends

Biofuels derived from industry waste have potential to substitute fossil fuels (Diesel and Gasoline) in internal combustion (IC) engines. Use of waste streams as fuels would help to reduce considerably life-cycle greenhouse gas emissions and minimise waste processing costs. In this study an investigation into the fuel properties of two waste derived biofuels were carried out, they are: (i) Glidfuel (GF) biofuel - a waste stream from paper industry, and (ii) Palm Oil Mill Effluent (POME) biodiesel - biodiesel produced from palm oil industry effluent through various treatment and transesterification process. GF and POME was mixed together at various proportions and separately with fossil diesel (FD) to assess the miscibility and various physical and chemical properties of the blends. Fuel properties such as kinematic viscosity, higher heating value, water content, acid number, density, flash point temperature, CHNO content, sulphur content, ash content, oxidation stability, cetane number and copper corrosion ratings of all the fuels were measured. The properties of GF, POME and various blends were compared with the corresponding properties of the standard FD. Significance of the fuel properties and their expected effects on combustion and exhaust emission characteristics of the IC engine were discussed. Results showed that most properties of both GF and POME biodiesel were comparable to FD. Both GF and POME were miscible with each other, and also separately with the FD. Flash point temperatures of GF and POME biodiesel were 40.7°C and 158.7°C respectively. The flash point temperature of GF was about 36% lower than corresponding FD. The water content in GF and FD were 0.74 (% wt) and 0.01 (% wt) respectively. Acidity values and corrosion ratings of both GF and POME biodiesel were low compared to corresponding value for FD. The study concluded that optimum GF-POME biofuel blends can substitute fossil diesel use in IC engines.

Otimização da síntese do AlSBA-15 para produção de biodiesel por transesteri-ficação do óleo de coco

Stimulus encouraging the production and consumption of biodiesel favors the policy of pre-serving the environment, contributing to the reduction of greenhouse gas reducing climate change. The current trend of research in this field focuses on improving these processes with the use of heterogeneous catalysts, seeing has significant advantages such as: low contamination of products, ease of separation of the catalyst from the reaction medium, possibili-ty of reuse of the catalyst, decreased corrosion problems. The objective of this research was to optimize the synthesis of AlSBA-15 for the production of biodiesel through transesterification process via ethyl route. For the optimization of hydrothermal synthesis of type AlSBA-15 catalyst has assembled a 23 factorial experimental matrix with eleven trials. The stoichiometric amounts of starting materials were varied according to different ratios Si / Al which is a factor in the experimental design, in addition to the time and temperature of aging of the synthesis gel. The material showed the best results of characterization (SBET = 591.7 (m2 / g), Vp = 0.83 (cm3 / g), Dp = 5.59 (nm), w = 6.48 (nm) was synthesized at 100 ° C for 24 hours, with a ratio Si / Al = 10.This material was applied as a heterogeneous catalyst in the reaction of ethyl transesterification as raw coconut oil in natura. Coconut oil presented suitable for obtaining biodiesel via ethyl route.The visual aspects and physical-chemical characteristics of the reaction products show that AlSBA-15 catalyst favored the reaction. According to physical-chemical analysis the order of oxidative stability of the product of the transesterification reaction was: catalytic reaction at 1500 ° C> non-catalytic reaction at 100 ° C> 100 ° C catalytic> catalytic reaction at 200 ° C Reaction. The results of oxidative stability and kinematic viscosity shows that the biodiesel produced in the catalytic sandblasting held at 150 ° C which was maintained within the ABNT NBR 7148, ABNT NBR 10441 and EN 14112.

Síntese de ésteres graxos a partir da biomassa da microalga Chlorella sp. por hidrólise “in situ” seguido de esterificação

Neste trabalho, a produção de ésteres graxos da biomassa úmida da microalga Chlorella sp. foi investigada pelo método de hidrólise seguido de esterificação e comparado com o método convencional de extração/transesterificação. Na primeira etapa do processo de hidrólise “in situ” seguido de esterificação ocorreu à hidrólise, onde a água presente na biomassa (50 e 100% em massa) reagiu com os lipídios de reserva, na presença de H2SO4 (20, 40 e 60% em massa), sendo obtidos os ácidos graxos brutos. Na segunda etapa do processo, os ácido graxos foram submetidos à reação de esterificação por 1 ou 4 h na presença de metanol, na razão molar de 30:1 álcool:AG, com H2SO4 10% em massa a 60 ou 100 °C. De acordo com os resultados obtidos no processo de hidrólise/esterificação, os melhores rendimentos – cerca de 7,3±0,8% de FAMEs, em relação a biomassa inicial – foram obtidos na presença de 60% de catalisador e 50% de umidade, na etapa de hidrólise e 100 °C por 4 h na etapa de esterificação. No método convencional de extração-transesterificação, os melhores rendimentos – 7,1±1,8% de FAMEs em relação à biomassa seca – foram obtidos utilizando a mistura de clorofórmio:metanol 2:1 v/v. Em resumo os rendimentos obtidos nos dois métodos de produção de ésteres graxos foram próximos. No entanto, o processo de hidrólise “in situ” seguido de esterificação possui vantagens como a utilização da biomassa úmida.

Produção de biodiesel de blendas dos óleos de mamona e arroz em escala piloto

A utilização do óleo de mamona como matéria-prima para produção de biodiesel mostra-se inviável na combustão interna do motor devido sua natureza química incomum que lhe confere especificações acima do permitido nas especificações técnicas da legislação nacional brasileira. Desta forma, a blenda com óleo de arroz refinado (OM:OA) qualifica o biodiesel atendendo a legislação nacional, além de corrigir a elevada acidez do óleo bruto de mamona prejudicial ao processo de transesterificação homogênea básica. No presente estudo realizou-se a produção de biodiesel etílico em escala piloto a partir de blendas de óleo bruto de mamona e óleo refinado de arroz em dois processos: o primeiro processo adotando a mistura direta dos dois óleos e o segundo processo pela esterificação antecipada do óleo bruto de mamona. Ambos os processos foram aplicados visando tanto definir os critérios de processo (acidez inicial) quanto o cumprimento das especificações técnicas (viscosidade e densidade). A produção em escala piloto (200 litros/batelada) foi realizada na Usina Demonstrativa para Produção de Biodiesel – BIOSUL (Edital FINEP, 2005) da Universidade Federal do Rio Grande - FURG utilizando em ambos os processos transesterificação, com hidróxido de sódio, e esterificação com ácido sulfúrico. Os processos apresentaram resultados satisfatórios, sendo o processo de mistura direta (Processo A) o que obteve melhores rendimentos (94,04%, blenda 20:80) enquanto que o processo de pré- esterificação (Processo B) foi aquele que proporcionou a maior fração de óleo de mamona na blenda (80,36%, 33:67). Os resultados para o Processo A de glicerol livre, monoacilgliceróis, diacilgliceróis, triacilgliceróis e de glicerol total foram, respectivamente, de 1,322 %, 6,092 %, 1,000 %, 0,884 e 3,152%. Neste estudo foi comprovada a viabilidade do processamento, em batelada, de blendas dos óleos de mamona e arroz. O óleo de mamona bruto pode ser utilizado em até 30% produzindo biodiesel dentro da legislação, verificando-se assim a viabilidade do uso da mamona na produção de biocombustíveis.

Síntese de biodiesel etílico de girassol utilizando transesterificação alcalina seguido da adição on pot de H2SO4

No presente trabalho foi investigada a adição on pot de H2SO4 no processo de transesterificação do óleo de girassol com etanol e metanol empregando catalisador alcalino (NaOH e KOH). Após o processo, ocorreu uma eficiente separação tanto do biodiesel etílico como metílico de seus co-produtos. Com a adição on pot de H2SO4 todo sabão formado no meio reacional foi transformado em ácidos graxos livres e o catalisador em sal (Na2SO4 ou K2SO4). A esterificação dos ácidos graxos livres presentes no biodiesel foi aplicada para atingir os padrões de biocombustíveis. Os ácidos graxos contidos no biodiesel foram esterificados na presença de uma mistura com razão molar de 60:1 e 80:1 álcool:ácido graxo, com H2SO4 5 e 10 % em massa. Também foi avaliada a influência da quantidade de catalisador na reação paralela de saponificação. De acordo com os resultados observou-se que a quantidade de sabão formado no processo, variou entre 1,80 e 10,66 % para 1 e 2 % de catalisador, respectivamente. A adição on pot de H2SO4 permitiu aumentar o rendimento de obtenção de biodiesel, e reduziu a geração de efluentes provenientes das lavagens para remoção do sabão, quando comparado com o processo convencional. As análises foram realizadas para avaliar a qualidade do biodiesel, com exceção da estabilidade oxidativa, os demais parâmetros estão de acordo com as normas da ANP. A glicerina foi obtida com uma pureza de 95 % de glicerol com aspecto límpido e incolor, sendo seu principal contaminante o sal proveniente da neutralização do catalisador.

Síntese de ésteres graxos de chlorella sp. utilizando os processos de extração-transesterificação e transesterificação in situ

Este trabalho teve como objetivo realizar estudo comparativo dos processos de extração-transesterificação e transesterificação in situ para a síntese de ésteres metílicos e etílicos a partir da microalga Chlorella sp. Utilizando o processo de extração-transesterificação, a extração dos lipídeos foi realizada a partir da biomassa seca de Chlorella sp., pelo uso de três diferentes solventes, clorofórmio:metanol, etanol e metanol, sendo o maior rendimento, 12,3%, obtido com a mistura clorofórmio:metanol (2:1 v/v). Independente do solvente extrator utilizado, as frações lipídicas obtidas apresentaram altos índices de acidez que variaram de 39,39 a 112,76 mg KOH/g. Após, os ésteres alquilicos graxos foram obtidos através da transesterificação das frações lipídicas realizada com metanol e etanol (razão molar álcool:extrato lipidico, 30:1) na presença de 10% de H2SO4 como catalisador a temperatura de 100 oC por 4h. A transesterificação in situ (alcoolise direta) aplicada a biomassa de Chlorella sp, foi realizada a 60 e 100 oC por 4 h usando 20% de H2SO4 com base na biomassa seca. A reação foi realizada a partir de 50 g de biomassa seca na presença de 150 mL de álcool (etanol ou metanol) A partir do método de transesterificação in situ foram obtidos maiores rendimentos de ésteres alquilicos graxos (11,0%), quando comparado ao processo de extração-transesterificação (8,1%). Os produtos purificados apresentaram teores de ésteres que variaram de 75,4% a 99,8%. A variação da temperatura de reação da transesterificação in situ não teve influência significativa nos rendimentos dos produtos.

Síntese, caracterização e aplicação de LaSBA-15 e como catalisador para obtenção de biodiesel de soja via rota etílica

Biodiesel is an alternative fuel, renewable, biodegradable and nontoxic. The transesterification of vegetable oils or animal fat with alcohol is most common form of production of this fuel. The procedure for production of biodiesel occurs most commonly through the transesterification reaction in which catalysts are used to accelerate and increase their income and may be basic, acid or enzyme. The use of homogeneous catalysis requires specific conditions and purification steps of the reaction products (alkyl ester and glycerol) and removal of the catalyst at the end of the reaction. As an alternative to improve the yield of the transesterification reaction, minimize the cost of production is that many studies are being conducted with the application of heterogeneous catalysis. The use of nano-structured materials as catalysts in the production of biodiesel is a biofuel alternative for a similar to mineral diesel. Although slower, can esterify transesterified triglycerides and free fatty acids and suffer little influence of water, which may be present in the raw material. This study aimed at the synthesis, characterization and application of nano-structured materials as catalysts in the transesterification reaction of soybean oil to produce biodiesel by ethylic route. The type material containing SBA-15 mesoporous lanthanum embedded within rightly Si / La = 50 was used catalyst. Solid samples were characterized by X-ray diffraction, thermogravimetric analysis, infrared spectroscopy, nitrogen adsorption and desorption. For the transesterification process, we used a molar ratio of 20:1 alcohol and oil with 0.250 g of catalyst at 60°C and times of 6 hours of reaction. It was determined the content of ethyl esters by H-NMR analysis and gas chromatography. It was found that the variable of conversion obtained was 80%, showing a good catalytic activity LaSBA-15 in the transesterification of vegetable oils via ethylic route

Multiscale modelling of heterogeneously catalysed transesterification reaction process:an overview

Biodiesel is fast becoming one of the key transport fuels as the world endeavours to reduce its carbon footprint and find viable alternatives to oil derived fuels. Research in the field is currently focusing on more efficient ways to produce biodiesel, with the most promising avenue of research looking into the use of heterogeneous catalysis. This article presents a framework for kinetic reaction and diffusive transport modelling of the heterogeneously catalysed transesterification of triglycerides into fatty acid methyl esters (FAMEs), unveiled by a model system of tributyrin transesterification in the presence of MgO catalysts. In particular, the paper makes recommendations on multicomponent diffusion calculations such as the diffusion coefficients and molar fluxes from infinite dilution diffusion coefficients using the Wilke and Chang correlation, intrinsic reaction kinetic studies using the Eley-Rideal kinetic mechanism with methanol adsorption as the rate determining steps and multiscale reaction-diffusion process simulation between catalytic porous and bulk reactor scales. © 2013 The Royal Society of Chemistry.

Advances on the development of novel heterogeneous catalysts for transesterification of triglycerides in biodiesel

This paper describes experimental work done towards the search for more profitable and sustainable alternatives regarding biodiesel production, using heterogeneous catalysts instead of the conventional homogenous alkaline catalysts, such as NaOH, KOH or sodium methoxide, for the methanolysis reaction. This experimental work is a first stage on the development and optimization of new solid catalysts, able to produce biodiesel from vegetable oils. The heterogeneous catalytic process has many differences from the currently used in industry homogeneous process. The main advantage is that, it requires lower investment costs, since no need for separation steps of methanol/catalyst, biodiesel/catalyst and glycerine/catalyst. This work resulted in the selection of CaO and CaO modified with Li catalysts, which showed very good catalytic performances with high activity and stability. In fact FAME yields higher than 92% were observed in two consecutive reaction batches without expensive intermediate reactivation procedures. Therefore, those catalysts appear to be suitable for biodiesel production.

FAST GC-FID METHOD FOR MONITORING ACIDIC AND BASIC CATALYTIC TRANSESTERIFICATION REACTIONS IN VEGETABLE OILS TO METHYL ESTER BIODIESEL PREPARATION

A fast gas chromatography with a flame ionisation detector (GC-FID) method for the simultaneous analysis of methyl palmitate (C16:0), stearate (C18:0), oleate (C18:1), linoleate (C18:2) and linolenate (C18:3) in biodiesel samples was proposed. The analysis was conducted in a customised ionic-liquid stationary-phase capillary, SLB-IL 111, with a length of 14 m, an internal diameter of 0.10 mm, a film thickness of 0.08 µm and operated isothermally at 160 °C using hydrogen as the carrier gas at a rate of 50 cm s-1 in run time about 3 min. Once methyl myristate (C14:0) is present lower than 0.5% m/m in real samples it was used as an internal standard. The method was successful applied to monitoring basic and acidic catalysis transesterification reactions of vegetable oils such as soybean, canola, corn, sunflower and those used in frying process.

Synthesis and characterisation of hydrotalcite-like compounds for transesterification reaction

A series of templated [Mg(1-x)Alx(OH)2]x+(CO3)x/n2- with different structural properties have been synthesised using an alkali-free coprecipitation route. The macroporous materials were been obtained using two different kind of templating agents, polymeric materials, in order to cover a bigger size range (750-70 nm). All the materials have been characterized by different techniques: porosimetry, SEM-EDX, TEM-EDX, MP-AES, XRD, CO2 titration before and after the calcinations process. All the materials have been tested for transesterification reaction of C4-C8 triglycerides with methanol for biodiesel production.

Simulation process of biodiesel production over heterogeneous catalysts

Biodiesel production is a very promising area due to the relevance that it is an environmental-friendly diesel fuel alternative to fossil fuel derived diesel fuels. Nowadays, most industrial applications of biodiesel production are performed by the transesterification of renewable biological sources based on homogeneous acid catalysts, which requires downstream neutralization and separation leading to a series of technical and environmental problems. However, heterogeneous catalyst can solve these issues, and be used as a better alternative for biodiesel production. Thus, a heuristic diffusion-reaction kinetic model has been established to simulate the transesterification of alkyl ester with methanol over a series of heterogeneous Cs-doped heteropolyacid catalysts. The novelty of this framework lies in detailed modeling of surface reacting kinetic phenomena and integrating that with particle-level transport phenomena all the way through to process design and optimisation, which has been done for biodiesel production process for the first time. This multi-disciplinary research combining chemistry, chemical engineering and process integration offers better insights into catalyst design and process intensification for the industrial application of Cs-doped heteropolyacid catalysts for biodiesel production. A case study of the transesterification of tributyrin with methanol has been demonstrated to establish the effectiveness of this methodology.

Simulation process of biodiesel production over heterogeneous catalysts

Biodiesel production is a very promising area due to the relevance that it is an environmental-friendly diesel fuel alternative to fossil fuel derived diesel fuels. Nowadays, most industrial applications of biodiesel production are performed by the transesterification of renewable biological sources based on homogeneous acid catalysts, which requires downstream neutralization and separation leading to a series of technical and environmental problems. However, heterogeneous catalyst can solve these issues, and be used as a better alternative for biodiesel production. Thus, a heuristic diffusion-reaction kinetic model has been established to simulate the transesterification of alkyl ester with methanol over a series of heterogeneous Cs-doped heteropolyacid catalysts. The novelty of this framework lies in detailed modeling of surface reacting kinetic phenomena and integrating that with particle-level transport phenomena all the way through to process design and optimisation, which has been done for biodiesel production process for the first time. This multi-disciplinary research combining chemistry, chemical engineering and process integration offers better insights into catalyst design and process intensification for the industrial application of Cs-doped heteropolyacid catalysts for biodiesel production. A case study of the transesterification of tributyrin with methanol has been demonstrated to establish the effectiveness of this methodology.

[meanings Of The Sickening Process For Patients With Systemic Lupus Erythematosus: A Review Of The Literature.]

Systemic lupus erythematosus is an autoimmune disease that causes many psychological repercussions that have been studied through qualitative research. These are considered relevant, since they reveal the amplitude experienced by patients. Given this importance, this study aims to map the qualitative production in this theme, derived from studies of experiences of adult patients of both genders and that had used as a tool a semi-structured interview and/or field observations, and had made use of a sampling by a saturation criterion to determine the number of participants in each study. The survey was conducted in Pubmed, Lilacs, Psycinfo e Cochrane databases, searching productions in English and Portuguese idioms published between January 2005 and June 2012. The 19 revised papers that have dealt with patients in the acute phase of the disease showed themes that were categorized into eight topics that contemplated the experienced process at various stages, from the onset of the disease, extending through the knowledge of the diagnosis and the understanding of the manifestations of the disease, drug treatment and general care, evolution and prognosis. The collected papers also point to the difficulty of understanding, of the patients, on what consists the remission phase, revealing also that this is a clinical stage underexplored by psychological studies.