Calidad poscosecha del tomate (Solanum lycopersicum L.) cultivado en sistemas ecológicos de fertilización

Se condujeron cuatro experimentos unifactoriales en condiciones de campo en áreas agrícolas de la Universidad de Granma, en el período comprendido de septiembre/2007 a enero/2010 para determinar el efecto de la aplicación de micorrizas arbusculares, Azotobacter chroococcum y ácidos húmicos sobre la productividad y la calidad poscosecha del tomate (Solanum lycopersicum L.) cv. “Vyta”, sobre un suelo de tipo Fluvisol. La aplicación simple y combinada de las micorrizas arbusculares, el Azotobacter chroococcum y los ácidos húmicos mostró un efecto positivo sobre la productividad de la variedad de tomate estudiada, al obtenerse incrementos significativos de este indicador en comparación con el control (sin aplicación), lográndose los mejores resultados con la combinación Glomus fasciculatum (0,3 kg m-2) + Azotobacter chroococcum (30 L ha-1) + ácidos húmicos (500 mg L-1) con valores de 54,57 t ha-1. Se comprobó además, que los tratamientos con estos bioproductos presentaron contenidos de sólidos solubles totales (SST), carbohidratos solubles totales (CST), vitamina C, porcentaje de materia seca (PMS), firmeza, longitud y anchura de los frutos superiores al control (sin aplicación). Las plantas controles (sin aplicación) significativamente incrementaron la acidez titulable (contenido de ácido cítrico) y la pérdida de peso y redujeron el pH de los frutos del tomate. Los análisis de correlación realizados revelan que existieron correlaciones positivas y significativas entre el contenido de vitamina C, materia seca, sólidos solubles totales, carbohidratos solubles totales, y el pH de los frutos, mientras que la acidez titulable presentó correlaciones negativas y significativas con todas las variables mencionadas anteriormente. Se encontró a su vez un efecto sinérgico en las plantas con la aplicación combinada de estos productos con respecto al control (sin aplicación), expresado en los mayores valores de los parámetros micorrízicos estudiados. ABSTRACT Four unifactorial experiments under field conditions in an agricultural area belonging to the University of Granma from September/2007 to January/2010 aiming to evaluate the effect of arbuscular mycorrhizas, Azotobacter and humic acids on tomato (Solanum lycopersicum L) cv. “Vyta” crop yield and postharvest quality in a Typic Fluvent soil were conducted. The simple and mixed application of arbuscular mycorrhizas, Azotobacter chroococcum and humic acids showed a positive effect on yield and internal postharvest parameters evaluated for the studied tomato variety, achieving significant increases with respect to the control treatment ones. The best results related to crop yield were achieved by combining Glomus fasciculatum (0.3 kg m-2) + Azotobacter chroococcum (30 L ha-1) + humic acids (500 mg L-1) that lead to 54.57 t ha-1. In addition, it was also demonstrated that the treatments under effect of biofertilizers and biostimulants resulted in higher total soluble solids (TSS), total soluble carbohydrates (TSC), vitamin C, dry matter contents (DMC), firmness, length and width of the fruits than the control treatment. The control plants showed significantly increased titrable acidity (citric acid content) and weight loss and reduced pH on the tomato fruits. The conducted correlation analyses revealed that there were significant and positive correlations between vitamin C content, dry matter, total soluble solids, total soluble carbohydrates, and pH of the fruit, while titratable acidity showed significant negative correlations with all variables mentioned above. At the same time, a synergic effect by mixed utilization of these biological products on tomato plants, with respect to control treatment (non-treated), was found regarding the increase of studied mycorrhizal parameters.

Asociación entre caracteres biométricos y calidad fisiológica en semillas de tomate (Solanum lycopersicum L.)

La clasificación de las semillas de especies olerícolas se realiza principalmente por peso y tamaño, con criterios similares a los aplicados en cereales y leguminosas, en que se asocia positivamente estos atributos físicos con la calidad fisiológica. No obstante lo anterior, en diversas especies de hortalizas la información es escasa y contradictoria al respecto, lo que motiva la realización de la presente investigación. En semillas de tomate (Solanum lycopersicum L.) se determinó el efecto del peso y tamaño sobre la calidad fisiológica expresada como germinación y vigor. Además, se correlacionaron los resultados de las pruebas de evaluación de calidad fisiológica y se describieron variables del crecimiento y desarrollo. Se utilizaron lotes de diferentes variedades de semillas híbridas de cuatro temporadas, producidas en un clima templado cálido con lluvias invernales y estación seca prolongada (32º 54’ y 34° 21´ latitud Sur). Se midió peso y tamaño de semillas, además en dos temporadas se evaluaron las características internas de área y peso de embrión y área de endospermo. Se determinó la calidad de las semillas con la prueba de germinación y según fuera el año de estudio se midió vigor con las pruebas de envejecimiento acelerado, de plantas útiles al trasplante y de plántulas emergidas. Con análisis de imágenes y rayos X se extrajeron datos del tamaño externo e interno de las semillas y plántulas. Los lotes se compararon mediante análisis de varianza y las medias con la prueba de Tukey, la asociación entre dos variables se determinó con correlaciones de Pearson, las variables de peso y tamaño de la semilla y su relación con las pruebas de calidad, se analizaron mediante regresiones múltiples. Se utilizó un nivel de significación de 0,05 de probabilidad. Los resultados indicaron que el tamaño y no el peso de las semillas de tomate, diferenciaron calidad entre lotes en las diversas variedades. La prueba de germinación tuvo una baja sensibilidad para discriminar lotes, además de una escasa correlación con las características físicas de las semillas, cuando hubo asociación, la relación fue débil y negativa. La prueba de vigor de envejecimiento acelerado diferenció lotes y presentó escasa asociación con las características físicas de las semillas. El número de semillas germinadas en la prueba de envejecimiento acelerado se explicó por el efecto del tamaño de las semillas, mientras que las fracciones de descarte se asociaron con el peso de las mismas. La prueba de vigor de plantas útiles al trasplante no discriminó entre lotes. Tuvo una asociación débil con el peso y tamaño de las semillas. El modelo asociado a esta relación explicó con un alto coeficiente de determinación que el peso de la semilla influyó sobre la emergencia temprana, mientras que la relación fue menor y negativa con plantas de mayor desarrollo. La prueba de vigor de plántulas emergidas discriminó lotes de semillas con plántulas de 3 a 5 días después de siembra. Hubo escasa y débil asociación entre esta prueba y las características de peso y tamaño las semillas. El modelo de predicción de plántulas emergidas fue particular en cada temporada, cuando hubo un coeficiente de determinación alto influyó negativamente el peso o tamaño de la semilla. Entre las pruebas de calidad fisiológica evaluadas en semillas de tomate hubo escasas correlaciones significativas. Entre germinación y vigor las correlaciones significativas fueron débiles y sólo se encontraron en algunas temporadas de evaluación. Entre las pruebas de vigor no hubo asociación. En las pruebas de vigor de plantas útiles al trasplante y de plántulas emergidas, los cotiledones alcanzaron el mayor porcentaje de materia seca y se correlacionaron fuertemente con la materia seca total. En la prueba de plántulas emergidas la materia seca de las radículas diferenció parcialmente lotes de semillas al igual que la longitud total y de las radículas. La longitud de la radícula se correlacionó fuertemente con la longitud total de plántulas. ABSTRACT Seed selection for olericultural species is mainly carried out considering weight and size with similar criteria to those applied in cereals and legumes where size and physiological quality are favorably associated. However, information about several species is limited and contradictory regarding the above, leading to the present research. In tomato (Solanum lycopersicum L.) seeds, the effect of weight and size on the physiological quality expressed as germination and vigor was determined. In addition, results of quality evaluation tests were correlated and variables of growth and development were described. Batches of hybrid seeds from four seasons were used. These seeds were produced in a mild warm climate with winter rainfalls and long dry season (32º 54’ and 34° 21´South Latitude). Seed weight and size were determined, additionally internal characteristics such as embryo area and weight as well as endosperm area were evaluated in two seasons. The quality of seeds was established using the germination test and, depending on the year of the study, vigor was measured through accelerated aging tests for plants useful for transplanting and emerged seedlings. Using imaging analysis and X rays, data regarding external and internal size of seeds and seedlings were obtained. Batches were compared through ANOVA and means using Tukey’s test; the association between both variables was determined with Pearson correlations, whereas variables of seed weight and size and their relation to quality tests were analyzed through multiple regressions. A significance level of 0.05 probability was used. Results showed that the size (but not the weight) of tomatoes differentiates quality between batches from several seasons. The germination test was not sensitive enough to discriminate batches in addition to having a limited correlation with the characteristics of seeds, when they were associated, the relation was weak and unfavorable. Vigor test for accelerated aging made the difference between batches and presented low association with physical characteristics of the seeds. The number of germinated seeds in the accelerated aging test was explained by the effect of the seed size, whereas cull fractions were associated with their weight. The vigor test of plants useful for transplanting did not discriminate between batches. The association with seed weight and size was weak. The model associated to this relation explained, with a high coefficient determination, that the seed weight had influence on early emergence, whereas the relation was minor and unfavorable with more developed plants. Vigor test of emerged seedlings discriminated batches of seeds with seedlings of 3 to 5 days after sowing. There was a limited and weak association between this test and the characteristics of seed weight and size. The prediction model for seedlings emerged was particular in each season, when the determination coefficient was high, seed weight and size influenced negatively. Among the physiological quality tests evaluated in tomato seeds, significant correlations were negligible. Between germination and vigor, significant correlations were poor, being only found in some evaluation seasons. There was no association in the vigor tests. In vigor tests for plants useful for transplanting and emerged seedlings, cotyledons reached the highest percentage of dry matter and were strongly correlated with total dry matter. In the test of emerged seedlings, dry matter of radicles partially differentiated batches of seeds as well as total length and radicles. Radicle length was strongly correlated with total seedlings length.

Determination of lipophilic and hydrophilic antioxidants in Solanum Lycopersicum L. tomato from Gordal variety by LL-USAE combined with UHPLC-PDA/FLR

Tomato (Lycopersicon esculentum L.) is one of the main constituents of the Mediterranean diet. Its consumption has been proposed to reduce the risk of cardiovascular diseases and certain types of cancer. It is therefore one of the most popular and extensively consumed vegetable crop worldwide. To gain insights on the potential of Lycopersicon esculentum L. as bioactive food, two analytical methodologies were developed to determine the levels of the lipophilic -tocopherol, α-tocopherol, β-carotene, lycopene; and hydrophilic antioxidants ascorbic acid. The quantification of total carotenoids (β-carotene and lycopene) was assessed through a liquid–liquid ultrasound assisted extraction (LL-USAE) in combination with ultraviolet-visible spectroscopy (UV-Vis), according to method of mean, for total carotenoids (λmáx = 450 nm. The ultra-high performance liquid chromatographic using both photodiode array and fluorescence detection (UHPLC-PDA/FLR), allows the identification and quantification of the target lipophilic and hydrophilic antioxidants. This methodology UHPLC-PDA/FLR is fast, simple and revealed a high sensitivity for the compounds under study. The limits of detection (LODs) and quantification (LOQs) obtained were much lower (about 10 times) than the reported in literature. The method LL-USAE/UV-Vis was validated and applied to different tomato foodstuffs. The results reveal a small increase of carotenoids content during maturation, reaching the maximum level when ripe. These results complement those obtained by the ORAC and TBARS assays that show an increase of antioxidant capacity during maturation. The LODs ans LOQs obtained were also about 10 times lower than reported in literature. The carotenoid content was also evaluated by LL-USAE/UV-Vis in different tomatoes varieties. Regional variety present the high carotenoid level, followed by campari and gordal, and at last grape. This methodology was also applied to different processed food samples containing tomatoes derivatives. Highest carotenoids content were obtained in concentrated tomato foodstuffs.

Genetic variation of and environmental effects on inducibility of resistance in tomatoes (Solanum lycopersicum L.) to Phytophthora infestans (Mont) de Bary

Many plant strengtheners are promoted for their supposed effects on nutrient uptake and/or resistance induction (IR). In addition, many organic fertilizers are supposed to enhance plant health and several studies have shown that tomatoes grown organically are more resistant to late blight, caused by Phytophthora infestans to tomatoes grown conventionally. Much is known about the mechanisms underlying IR. In contrast, there is no systematic knowledge about genetic variation for IR. Therefore, the following questions were addressed in the presented dissertation: (i) Is there genetic variation among tomato genotypes for inducibility of resistance to P. infestans? (ii) How do different PS compare with the chemical inducer BABA in their ability to IR? (iii) Does IR interact with the inducer used and different organic fertilizers? A varietal screening showed that contrary to the commonly held belief IR in tomatoes is genotype and isolate specific. These results indicate that it should be possible to select for inducibility of resistance in tomato breeding. However, isolate specificity also suggests that there could be pathogen adaptation. The three tested PS as well as two of the three tested organic fertilisers all induced resistance in the tomatoes. Depending on PS or BABA variety and isolate effects varied. In contrast, there were no variety and isolate specific effects of the fertilisers and no interactions with the PS and fertilisers. This suggests that the different PS should work independent of the soil substrate used. In contrast the results were markedly different when isolate mixtures were used for challenge inoculations. Plants were generally less susceptible to isolate mixtures than to single isolates. In addition, the effectiveness of the PS was greater and more similar to BABA when isolate mixtures were used. The fact that the different PS and BABA differed in their ability to induce resistance in different host genotype -pathogen isolate combinations puts the usefulness of IR as a breeding goal in question. This would result in varieties depending on specific inducers. The results with the isolate mixtures are highly relevant. On the one hand they increase the effectiveness of the resistance inducers. On the other hand, measures that increase the pathogen diversity such as the use of diversified host populations will also increase the overall resistance of the hosts. For organic tomato production the results indicate that it is possible to enhance the tomato growing system with respect to plant health management by using optimal fertilisers, plant strengtheners and any measures that increase system diversity.

Caracterização molecular do gene que codifica a TCTP (Translationally Controlled Tumor Protein) em tomate (Solanum lycopersicum cv. Santa Clara)

The gene encoding TCTP (Translationally Controlled Tumour Protein) is present in all eukaryotes and its product is involved in various cellular processes. Although well characterized in mammals, there are only few works available in the literature related to the analysis of this protein in plants. In this present work, the expression of the gene encoding TCTP was analyzed in different organs/tissues of tomato plants (Solanum lycopersicum cv. Santa Clara). A quantification performed by RT-qPCR revealed the presence of TCTP transcript in all tissues/organs analyzed, with the highest expression level found in leaves. With the exception of fruits in intermediate stage of maturation, for which a small increase on the expression was detected, there was minimal variation in the relative expression of TCTP in other organ/tissues. In parallel, the effects of the constitutive expression of TCTP were investigated using transgenic tobacco lines able to overexpress this protein at different levels (T1, T2 and T3). Seedlings of these lines, and of a non-transgenic control line, were grown in MS culture medium for 21 days. At the end of this period, the length of roots and leaves was taken and the seedlings were photographed. According to Tukey's test, the analysis of the mean root length revealed a significant difference between T1 and T3 lines when compared to the control, although the same was not observed for the T2 line. For leaves, according to Kruskal-Wallis test, there was a statistical difference between the averages of leaf growth obtained for the different lines evaluated. According to these results, we can conclude that TCTP shows an ubiquitous expression in tomato plants, with the highest expression detected in leaves, and also that its overexpression promoted a higher root and leaf development in two of three transgenic tobacco lines tested

Abordagem fotomorfogenética para explorar o estresse abiótico em tomateiro (Solanum lycopersicum L.)

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Use of farmer-prioritized vertisol management options for enhanced green gram and tomato production in central Kenya

Green grams (Phaseolus aures L.) and tomato (Solanum lycopersicum L) are widely grown in the vertisols of the Mwea Irrigation Scheme alongside the rice fields. Green grams can fix nitrogen (biological nitrogen fixation) and are grown for its highly nutritious and curative seeds while tomatoes are grown for its fruit rich in fibres, minerals and vitamins. The two can be prepared separately or together in a variety of ways including raw salads and/or cooked/fried. They together form significant delicacies consumed with rice which is the major cash crop grown in the black cotton soils. The crops can grow well in warm conditions but tomato is fairly adaptable except under excessive humidity and temperatures that reduce yields. Socio-economic prioritization by the farming community and on-farm demonstrations of soil management options were instituted to demonstrate enhanced green gram and tomato production in vertisol soils of lower parts of Kirinyaga County (Mwea East and Mwea West districts). Drainage management was recognized by the farming community as the best option although a reduced number of farmers used drainage and furrows/ridges, manure, fertilizer and shifting options with reducing order of importance. Unavailability of labour and/or financial cost for instituting these management options were indicated as major hindrances to adopt the yield enhancing options. Labour force was contributed to mainly by the family alongside hiring (64.2%) although 28% and 5.2% respectively used hired or family labour alone. The female role in farming activities dominated while the male role was minimal especially at weeding. The youth role remained excessively insignificant and altogether absent at marketing. Despite the need for labour at earlier activities (especially when management options needed to be instituted) it was at the marketing stage that this force was directed. Soils were considered infertile by 60% but 40% indicated that their farms had adequate fertility. Analysis showed that ridging and application of farm yard manure and fertilizer improved fertility, crop growth and income considerably. Phosphate and zinc enhancement reduced alkalinity and sodicity. Green gram and tomato yields increased under ridges and farm yard manure application by 17-25% which significantly enhanced household income.

Indole acetic acid and ACC deaminase fromendophytic bacteria improves the growth of Solanum lycopersicum

Background: Endophytic bacteria are ubiquitous in all plant species contributing in host plant\'s nutrient uptake and helping the host to improve its growth. Moringa peregrina which is a medicinal plant, growing in arid region of Arabia, was assessed for the presence of endophytic bacterial strains. Results: PCR amplification and sequencing of 16S rRNA of bacterial endophytes revealed the 5 endophytic bacteria, in which 2 strains were from Sphingomonas sp.; 2 strains from Bacillus sp. and 1 from Methylobacterium genus. Among the endophytic bacterial strains, a strain of Bacillus subtilis LK14 has shown significant prospects in phosphate solubilization (clearing zone of 56.71 mm after 5 d), ACC deaminase (448.3 ± 2.91 nM α-ketobutyrate mg-1 h-1) and acid phosphatase activity (8.4 ± 1.2 nM mg-1 min-1). The endophytic bacteria were also assessed for their potential to produce indole-3-acetic acid (IAA). Among isolated strains, the initial spectrophotometry analysis showed significantly higher IAA production by Bacillus subtilis LK14. The diurnal production of IAA was quantified using multiple reactions monitoring method in UPLC/MS–MS. The analysis showed that LK14 produced the highest (8.7 μM) IAA on 14th d of growth. Looking at LK14 potentials, it was applied to Solanum lycopersicum , where it significantly increased the shoot and root biomass and chlorophyll (a and b) contents as compared to control plants. Conclusion: The study concludes that using endophytic bacterial strains can be bio-prospective for plant growth promotion, which might be an ideal strategy for improving growth of crops in marginal lands.

Vertical growth and resonator properties of hexagonally shaped zinc oxide nanonails

We synthesized vertically aligned nail-shaped ZnO nanocrystal arrays on silicon substrates via a combination of a carbothermal reduction method and textured ZnO seeding layers that were precoated on silicon substrates by thermally decomposing zinc acetate, and studied their optical properties using cathodoluminescence (CL) and photoluminescence techniques. The ZnO nanonails show a sharp band-gap edge UV emission and a defect-related broad green emission. Monochromatic CL images of an individual ZnO nanonail show variations in spatial distributions of respective CL bands that had different origins. We attribute the spatial variation of CL images to an uneven distribution of luminescent defects and/or a structure-related light out-coupling from hexagonal ZnO nanostructures. The most distinct CL feature from the hexagonal head of an individual ZnO nanonail was the occurrence of a series of distinct resonant peaks within the visible wavelength range. It appeared that the head of a nanonail played the role of a hexagonal cavity so that polarizationdependent whispering gallery modes were stimulated by electron beam excitation.

Functionalised zinc oxide nanowire gas sensors : enhanced NO2 gas sensor response by chemical modification of nanowire surfaces

Surface coating with an organic self-assembled monolayer (SAM) can enhance surface reactions or the absorption of specific gases and hence improve the response of a metal oxide (MOx) sensor toward particular target gases in the environment. In this study the effect of an adsorbed organic layer on the dynamic response of zinc oxide nanowire gas sensors was investigated. The effect of ZnO surface functionalisation by two different organic molecules, tris(hydroxymethyl)aminomethane (THMA) and dodecanethiol (DT), was studied. The response towards ammonia, nitrous oxide and nitrogen dioxide was investigated for three sensor configurations, namely pure ZnO nanowires, organic-coated ZnO nanowires and ZnO nanowires covered with a sparse layer of organic-coated ZnO nanoparticles. Exposure of the nanowire sensors to the oxidising gas NO2 produced a significant and reproducible response. ZnO and THMA-coated ZnO nanowire sensors both readily detected NO2 down to a concentration in the very low ppm range. Notably, the THMA-coated nanowires consistently displayed a small, enhanced response to NO2 compared to uncoated ZnO nanowire sensors. At the lower concentration levels tested, ZnO nanowire sensors that were coated with THMA-capped ZnO nanoparticles were found to exhibit the greatest enhanced response. ΔR/R was two times greater than that for the as-prepared ZnO nanowire sensors. It is proposed that the ΔR/R enhancement in this case originates from the changes induced in the depletion-layer width of the ZnO nanoparticles that bridge ZnO nanowires resulting from THMA ligand binding to the surface of the particle coating. The heightened response and selectivity to the NO2 target are positive results arising from the coating of these ZnO nanowire sensors with organic-SAM-functionalised ZnO nanoparticles.

Gold coating of silica and zinc oxide nanoparticles by the surface reduction of gold(I) chloride

The possibility of a surface inner sphere electron transfer mechanism leading to the coating of gold via the surface reduction of gold(I) chloride on metal and semi-metal oxide nanoparticles was investigated. Silica and zinc oxide nanoparticles are known to have very different surface chemistry, potentially leading to a new class of gold coated nanoparticles. Monodisperse silica nanoparticles were synthesised by the well known Stöber protocol in conjunction with sonication. The nanoparticle size was regulated solely by varying the amount of ammonia solution added. The presence of surface hydroxyl groups was investigated by liquid proton NMR. The resultant nanoparticle size was directly measured by the use of TEM. The synthesised silica nanoparticles were dispersed in acetonitrile (MeCN) and added to a bis acetonitrile gold(I) co-ordination complex [Au(MeCN)2]+ in MeCN. The silica hydroxyl groups were deprotonated in the presence of MeCN generating a formal negative charge on the siloxy groups. This allowed the [Au(MeCN)2]+ complex to undergo ligand exchange with the silica nanoparticles, which formed a surface co-ordination complex with reduction to gold(0), that proceeded by a surface inner sphere electron transfer mechanism. The residual [Au(MeCN)2]+ complex was allowed to react with water, disproportionating into gold(0) and gold(III) respectively, with gold(0) being added to the reduced gold already bound on the silica surface. The so-formed metallic gold seed surface was found to be suitable for the conventional reduction of gold(III) to gold(0) by ascorbic acid. This process generated a thin and uniform gold coating on the silica nanoparticles. This process was modified to include uniformly gold coated composite zinc oxide nanoparticles (Au@ZnO NPs) using surface co-ordination chemistry. AuCl dissolved in acetonitrile (MeCN) supplied chloride ions which were adsorbed onto ZnO NPs. The co-ordinated gold(I) was reduced on the ZnO surface to gold(0) by the inner sphere electron transfer mechanism. Addition of water disproportionated the remaining gold(I) to gold(0) and gold(III). Gold(0) bonded to gold(0) on the NP surface with gold(III) was reduced to gold(0) by ascorbic acid (ASC), which completed the gold coating process. This gold coating process of Au@ZnO NPs was modified to incorporate iodide instead of chloride. ZnO NPs were synthesised by the use of sodium oxide, zinc iodide and potassium iodide in refluxing basic ethanol with iodide controlling the presence of chemisorbed oxygen. These ZnO NPs were treated by the addition of gold(I) chloride dissolved in acetonitrile leaving chloride anions co-ordinated on the ZnO NP surface. This allowed acetonitrile ligands in the added [Au(MeCN)2]+ complex to surface exchange with adsorbed chloride from the dissolved AuCl on the ZnO NP surface. Gold(I) was then reduced by the surface inner sphere electron transfer mechanism. The presence of the reduced gold on the ZnO NPs allowed adsorption of iodide to generate a uniform deposition of gold onto the ZnO NP surface without the use of additional reducing agents or heat.

Evidence for the adsorption of molecules at special sites located at copper/zinc oxide interfaces. Part 2. -- A fourier-transform infrared spectroscopy study of methanol adsorption on reduced and oxidised Cu/ZnO/SiO2 catalysts

FTIR spectra are reported of methanol adsorbed at 295 K on ZnO/SiO 2, on reduced Cu/ZnO/SiO2 and on Cu/ZnO/SiO2 which had been preoxidised by exposure to nitrous oxide. Methanol on ZnO/SiO2 gave methoxy species on ZnO and SiO, in addition to both strongly and weakly physisorbed methanol on SiO2. The corresponding adsorption of methanol on reduced Cu/ZnO/SiO2 also gave methoxy species on Cu and a small amount of bridging formate. Reaction of methanol with a reoxidised Cu/ZnO/SiO2 catalyst resulted in an enhanced quantity of methoxy species on Cu. Heating adsorbed species on Cu/ZnO/SiO2 at 393 K led to the loss of methoxy groups on Cu and the concomitant formation of formate species on both ZnO and Cu. The comparable reaction on a reoxidised Cu/ZnO/SiO2 catalyst gave an increased amount of formate species on ZnO and this correlated with an increased quantity of methoxy groups lost from Cu. An explanation is given in terms of adsorption of formate and formaldehyde species at special sites located at the copper/zinc oxide interface.

Evidence for the adsorption of molecules at special sites located at copper/zinc oxide interfaces: Part 1. -- A Fourier-transform infrared study of formic acid and formaldehyde adsorption on reduced and oxidised Cu/ZnO/SiO2 catalysts

Fourier-transform infrared (FTIR) spectra are reported of formic acid and formaldehyde on ZnO/SiO2, reduced Cu/ZnO/SiO2 and reoxidised Cu/ZnO/SiO2 catalyst. Formic acid adsorption on ZnO/SiO2 produced mainly bidentate zinc formate species with a lesser quantity of unidentate zinc formate. Formic acid on reduced Cu/ZnO/SiO2 catalyst resulted not only in the formation of bridging copper formate structures but also in an enhanced amount of formate relative to that for ZnO/SiO2 catalyst. Formic acid on reoxidised Cu/ZnO/SiO2 gave unidentate formate species on copper in addition to zinc formate moieties. The interaction of formaldehyde with ZnO/SiO2 catalyst resulted in the formation of zinc formate species. The same reaction on reduced Cu/ZnO/SiO2 catalyst gave bridging formate on copper and a remarkable increase in the quantity of formate species associated with the zinc oxide. Adsorption of formaldehyde on a reoxidised Cu/ZnO/SiO2 catalyst produced bridging copper formate and again an apparent increase in the concentration of zinc formate species. An explanation in terms of the adsorption of molecules at special sites located at the interface between copper and zinc oxide is given.

Evidence for the adsorption of molecules at special sites located at copper/zinc oxide interfaces. Part 3. -- Fourier-transform infrared study of methyl formate adsorption on reduced and oxidised Cu/ZnO/SiO2 catalysts

FTIR spectra are reported of methyl formate adsorbed at 295 K on ZnO/SiO2, reduced Cu/ZnO/SiO2 and on Cu/ZnO/SiO2 which had been preoxidised by exposure to nitrous oxide. Methyl formate on ZnO/SiO2 gave adsorbed zinc formate species and strongly physisorbed molecular methanol on silica. The comparable reaction of methyl formate with reduced Cu/ZnO/SiO2 catalyst produced bridging formate species on copper and a diminished quantity of zinc formate relative to that formed on ZnO/SiO2 catalyst. This effect is explained in terms of site blockage on the ZnO surface by small copper clusters. Addition of methyl formate to a reoxidised Cu/ZnO/SiO2 catalyst produced a considerably greater amount of formate species on zinc oxide and methoxy groups on copper were detected. The increase in concentration of zinc formate species was rationalised in terms of rearrangement of unidentate copper formate species to become bonded to copper and zinc oxide sites located at the interface between these two components.