Evaluating fault tolerance on asymmetric multicore systems-on-chip using iso-metrics

The end of Dennard scaling has promoted low power consumption into a firstorder concern for computing systems. However, conventional power conservation schemes such as voltage and frequency scaling are reaching their limits when used in performance-constrained environments. New technologies are required to break the power wall while sustaining performance on future processors. Low-power embedded processors and near-threshold voltage computing (NTVC) have been proposed as viable solutions to tackle the power wall in future computing systems. Unfortunately, these technologies may also compromise per-core performance and, in the case of NTVC, xreliability. These limitations would make them unsuitable for HPC systems and datacenters. In order to demonstrate that emerging low-power processing technologies can effectively replace conventional technologies, this study relies on ARM’s big.LITTLE processors as both an actual and emulation platform, and state-of-the-art implementations of the CG solver. For NTVC in particular, the paper describes how efficient algorithm-based fault tolerance schemes preserve the power and energy benefits of very low voltage operation.

The effect of synchronized group activities on pain threshold as a predictor of cooperation

Recent research suggests that participating in vigorous synchronized physical activity may result in elevated levels of endorphins, which may in turn affect social bonding (Cohen et. al., 2009). The present research aimed to examine whether or not the change in pain tolerance would be able to predict participants’ willingness to cooperate after statistically controlling for the groups’ condition. Participants were asked to run on a treadmill for 30 minutes under one of two conditions (control vs. synchronized). Prior to and after the run participants underwent a pain tolerance test. Once completed, a second activity was introduced to the participants; a cooperative game. A public goods game was used to measure an individual’s willingness to cooperate. The results showed the synchronized condition was able to predict that participants cooperated more during the public goods game (p = .009), however the change in pain threshold was unable to significantly predict cooperation (p = .32).

Landscape gene flow, coexistence and threshold effect: The case of genetically modified herbicide tolerant oilseed rape (Brassica napus)

Globally there have been a number of concerns about the development of genetically modified crops many of which relate to the implications of gene flow at various levels. In Europe these concerns have led the European Union (EU) to promote the concept of 'coexistence' to allow the freedom to plant conventional and genetically modified (GM) varieties but to minimise the presence of transgenic material within conventional crops. Should a premium for non-GM varieties emerge on the market, the presence of transgenes would generate a 'negative externality' to conventional growers. The establishment of maximum tolerance level for the adventitious presence of GM material in conventional crops produces a threshold effect in the external costs. The existing literature suggests that apart from the biological characteristics of the plant under consideration (e.g. self-pollination rates, entomophilous species, anemophilous species, etc.), gene flow at the landscape level is affected by the relative size of the source and sink populations and the spatial arrangement of the fields in the landscape. In this paper, we take genetically modified herbicide tolerant oilseed rape (GM HT OSR) as a model crop. Starting from an individual pollen dispersal function, we develop a spatially explicit numerical model in order to assess the effect of the size of the source/sink populations and the degree of spatial aggregation on the extent of gene flow into conventional OSR varieties under two alternative settings. We find that when the transgene presence in conventional produce is detected at the field level, the external cost will increase with the size of the source area and with the level of spatial disaggregation. on the other hand when the transgene presence is averaged among all conventional fields in the landscape (e.g. because of grain mixing before detection), the external cost will only depend on the relative size of the source area. The model could readily be incorporated into an economic evaluation of policies to regulate adoption of GM HT OSR. (c) 2007 Elsevier B.V. All rights reserved.

Electromyographic fatigue threshold of the biceps brachii muscle during dynamic contraction

The purpose of this study was to identify the Electromyographic Fatigue Threshold (EMG FT) of the biceps brachii muscle bilaterally during the elbow flexion in tests performed in different times: 30 second test, 1 minute test and fatiguing test, in concentric (CC) and eccentric (EC) phases. Nine healthy young men performed the elbow flexion with loads corresponding at 25%, 35% and 45% of the one repetition maximum (1-RM) in separate days. The results indicated that the test applied for the biceps brachii muscle during elbow flexion induced a progressive increment of EMG activity with time indicating muscle fatigue and allowed the identification of the EMG FT. The three tests presented no difference of EMG FT between CC and EC phases bilaterally.

Exercise at anaerobic threshold intensity and insulin secretion by isolated pancreatic islets of rats

To evaluate the effect of acute exercise and exercise training at the anaerobic threshold (AT) intensity on aerobic conditioning and insulin secretion by pancreatic islets, adult male Wistar rats were submitted to the lactate minimum test (LMT) for AT determination. Half of the animals were submitted to swimming exercise training (trained), 1 h/day, 5 days/week during 8 weeks, with an overload equivalent to the AT. The other half was kept sedentary. At the end of the experimental period, the rats were submitted to an oral glucose tolerance test and to another LMT. Then, the animals were sacrificed at rest or immediately after 20 minutes of swimming exercise at the AT intensity for pancreatic islets isolation. At the end of the experiment mean workload (% bw) at AT was higher and blood lactate concentration (mmol/L) was lower in the trained than in the control group. Rats trained at the AT intensity showed no alteration in the areas under blood glucose and insulin during OGTT test. Islet insulin content of trained rats was higher than in the sedentary rats while islet glucose uptake did not differ among the groups. The static insulin secretion in response to the high glucose concentration (16.7 mM) of the sedentary group at rest was lower than the sedentary group submitted to the acute exercise and the inverse was observed in relation to the trained groups. physical training at the AT intensity improved the aerobic condition and altered insulin secretory pattern by pancreatic islets. © 2010 Landes Bioscience.

Desiccation tolerance in seeds of Annona emarginata (Schldtl.) H. Rainer and action of plant growth regulators on germination

Annona emarginata (Schldtl.) H. Rainer (araticum-de-terra-fria) is used as a rootstock for several species of Annonaceae. It is suggested that these seeds should be sown immediately after extraction and, therefore, they could be intolerant to desiccation. There are several mechanisms involved with desiccation tolerance. Soluble sugars, for example, can accumulate and act as osmoprotectants for the membrane system during desiccation. The aim of this study is to assess desiccation tolerance in A. emarginata seeds. In addition, we examined the soluble sugars involved in desiccation tolerance. Finally, we determined the effect of gibberellic acid (GA4+7) and N-(phenylmethyl)-aminopurine in promoting the germination of seeds with different water contents. The experiment consisted of a randomized 4×5 factorial design (desiccation levels × concentration of growth regulators). After drying, seeds containing 31 (control), 19, 12 and 5% water were incubated in different concentrations of GA4+7 N-(phenylmethyl)-aminopurine (0, 250, 500, 750 and 1000 mg L-1) for 60 hours. The experiment was conducted in a germination chamber with alternating temperature and photoperiod of 20oC for 18 hours of darkness and 30oC for 6 hours of light. We analyzed electrical conductivity, germination rate, mean germination time, germination speed, frequency and uniformity of germination, percentage of dormant seeds and soluble sugar profile in intact seeds through high-performance liquid chromatography (HPLC). The data were subjected to analysis of variance, and the means were compared using Tukey's test at a threshold of p<0.05. The results showed that seeds of A. emarginata appears to be desiccation tolerant and, also, that sucrose increases when seed water content is reduced to values as low as 12%, exogenous GA4+7+N-(phenylmethyl)-aminopurine improves its germinability.

Comparison of pain threshold and duration of pain perception in men and women of different ages

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Increasing Intensity of TENS Prevents Analgesic Tolerance in Rats

Transcutaneous electrical nerve stimulation (TENS) reduces hyperalgesia and pain. Both low-frequency (LF) and high-frequency (HF) TENS, delivered at the same intensity (90% motor threshold [MT]) daily, result in analgesic tolerance with repeated use by the fifth day of treatment. The current study tested 1) whether increasing intensity by 10% per day prevents the development of tolerance to repeated TENS; and 2) whether lower intensity TENS (50% MT) produces an equivalent reduction in hyperalgesia when compared to 90% MT TENS. Sprague-Dawley rats with unilateral knee joint inflammation (3% carrageenan) were separated according to the intensity of TENS used: sham, 50% LF, 50% HF, 90% LF, 90% HF, and increased intensity by 10% per day (IF and HF). The reduced mechanical withdrawal threshold following the induction of inflammation was reversed by application of TENS applied at 90% MT intensity and increasing intensity for the first 4 days. On the fifth day, the groups that received 90% MT intensity showed tolerance. Nevertheless, the group that received an increased intensity on each day still showed a reversal of the mechanical withdrawal threshold with TENS. These results show that the development of tolerance can be delayed by increasing intensity of TENS. Perspective: Our results showed that increasing intensity in both frequencies of TENS was able to prevent analgesic tolerance. Results from this study suggest that increasing intensities could be a clinical method to prevent analgesic tolerance and contribute to the effective use of TENS in reducing inflammatory pain and future clinical trials. (c) 2012 by the American Pain Society

Ototoxicity and tolerance assessment of a TrisEDTA and polyhexamethylene biguanide ear flush formulation in dogs

Clinically healthy mixed breed dogs (n = 20) were used to determine if a Tris (tromethamine)-buffered test solution, Otinide((R)) (Trademark of Dermcare-Vet Pty-Ltd, Australia), containing disodium ethylenediamine tetraacetic acid (EDTA; 1.21 g/L) and polyhexamethylene biguanide (PHMB; 0.22 g/L) caused ototoxicity or vestibular dysfunction. The dogs were randomly assigned to either a control group (group A, n = 10) receiving saline, or a treatment group (group B, n = 10) receiving the test solution. Phase 1 of the study consisted of applying 5.0 mL of saline to both ears of the control group (group A) and 5 mL of test solution to both ears of the test group (group B), for 21 days. A bilateral myringotomy was then performed on each dog under deep sedation. Phase 2 of the study then consisted of applying 2.0 mL of the saline to both ears of the control group (group A) and 2.0 mL of the test solution to both ears of the test group (group B), for 14 days. Throughout the study, dogs were examined for clinical health, and underwent otoscopic, vestibular and auditory examinations. The auditory examinations included brainstem auditory evoked potential (BAEP) threshold and supra-threshold assessments using both click and 8 kHz tone burst stimuli. The absence of vestibular signs and effects on the BAEP attributable to the test solution suggested the test solution could be applied safely to dogs, including those with a damaged tympanic membrane.

Development of surface flaw thresholds for pre-cured fiber reinforced polymer and groove size tolerance for near surface mounted fiber reinforced polymer retrofit systems

Since the introduction of fiber reinforced polymers (FRP) for the repair and retrofit of concrete structures in the 1980’s, considerable research has been devoted to the feasibility of their application and predictive modeling of their performance. However, the effects of flaws present in the constitutive components and the practices in substrate preparation and treatment have not yet been thoroughly studied. This research aims at investigating the effect of surface preparation and treatment for the pre-cured FRP systems and the groove size tolerance for near surface mounted (NSM) FRP systems; and to set thresholds for guaranteed system performance. This study was conducted as part of the National Cooperative Highway Research Program (NCHRP) Project 10-59B to develop construction specifications and process control manual for repair and retrofit of concrete structures using bonded FRP systems. The research included both analytical and experimental components. The experimental program for the pre-cured FRP systems consisted of a total of twenty-four (24) reinforced concrete (RC) T-beams with various surface preparation parameters and surface flaws, including roughness, flatness, voids and cracks (cuts). For the NSM FRP systems, a total of twelve (12) additional RC T-beams were tested with different grooves sizes for FRP bars and strips. The analytical program included developing an elaborate nonlinear finite element model using the general purpose software ANSYS. The bond interface between FRP and concrete was modeled by a series of nonlinear springs. The model was validated against test data from the present study as well as those available from the literature. The model was subsequently used to extend the experimental range of parameters for surface flatness in pre-cured FRP systems and for groove size study in the NSM FRP systems. Test results, confirmed by further analyses, indicated that contrary to the general belief in the industry, the impact of surface roughness on the global performance of pre-cured FRP systems was negligible. The study also verified that threshold limits set for wet lay-up FRP systems can be extended to pre-cured systems. The study showed that larger surface voids and cracks (cuts) can adversely impact both the strength and ductility of pre-cured FRP systems. On the other hand, frequency (or spacing) of surface cracks (cuts) may only affect system ductility rather than its strength. Finally, within the range studied, groove size tolerance of ±1/8 in. does not appear to have an adverse effect on the performance of NSM FRP systems.

Coral Thermal Tolerance: Tuning Gene Expression to Resist Thermal Stress

The acclimatization capacity of corals is a critical consideration in the persistence of coral reefs under stresses imposed by global climate change. The stress history of corals plays a role in subsequent response to heat stress, but the transcriptomic changes associated with these plastic changes have not been previously explored. In order to identify host transcriptomic changes associated with acquired thermal tolerance in the scleractinian coralAcropora millepora, corals preconditioned to a sub-lethal temperature of 3°C below bleaching threshold temperature were compared to both non-preconditioned corals and untreated controls using a cDNA microarray platform. After eight days of hyperthermal challenge, conditions under which non-preconditioned corals bleached and preconditioned corals (thermal-tolerant) maintained Symbiodinium density, a clear differentiation in the transcriptional profiles was revealed among the condition examined. Among these changes, nine differentially expressed genes separated preconditioned corals from non-preconditioned corals, with 42 genes differentially expressed between control and preconditioned treatments, and 70 genes between non-preconditioned corals and controls. Differentially expressed genes included components of an apoptotic signaling cascade, which suggest the inhibition of apoptosis in preconditioned corals. Additionally, lectins and genes involved in response to oxidative stress were also detected. One dominant pattern was the apparent tuning of gene expression observed between preconditioned and non-preconditioned treatments; that is, differences in expression magnitude were more apparent than differences in the identity of genes differentially expressed. Our work revealed a transcriptomic signature underlying the tolerance associated with coral thermal history, and suggests that understanding the molecular mechanisms behind physiological acclimatization would be critical for the modeling of reefs in impending climate change scenarios.

Development of Surface Flaw Thresholds for Pre-Cured Fiber Reinforced Polymer and Groove Size Tolerance for Near Surface Mounted Fiber Reinforced Polymer Retrofit Systems

Since the introduction of fiber reinforced polymers (FRP) for the repair and retrofit of concrete structures in the 1980’s, considerable research has been devoted to the feasibility of their application and predictive modeling of their performance. However, the effects of flaws present in the constitutive components and the practices in substrate preparation and treatment have not yet been thoroughly studied. This research aims at investigating the effect of surface preparation and treatment for the pre-cured FRP systems and the groove size tolerance for near surface mounted (NSM) FRP systems; and to set thresholds for guaranteed system performance. The research included both analytical and experimental components. The experimental program for the pre-cured FRP systems consisted of a total of twenty-four (24) reinforced concrete (RC) T-beams with various surface preparation parameters and surface flaws, including roughness, flatness, voids and cracks (cuts). For the NSM FRP systems, a total of twelve (12) additional RC T-beams were tested with different grooves sizes for FRP bars and strips. The analytical program included developing an elaborate nonlinear finite element model using the general purpose software ANSYS. The model was subsequently used to extend the experimental range of parameters for surface flatness in pre-cured FRP systems, and for groove size study in the NSM FRP systems. Test results, confirmed by further analyses, indicated that contrary to the general belief in the industry, the impact of surface roughness on the global performance of pre-cured FRP systems was negligible. The study also verified that threshold limits set for wet lay-up FRP systems can be extended to pre-cured systems. The study showed that larger surface voids and cracks (cuts) can adversely impact both the strength and ductility of pre-cured FRP systems. On the other hand, frequency (or spacing) of surface cracks (cuts) may only affect system ductility rather than its strength. Finally, within the range studied, groove size tolerance of +1/8 in. does not appear to have an adverse effect on the performance of NSM FRP systems.

Error tolerance of topological codes with independent bit-flip and measurement errors

Topological quantum error correction codes are currently among the most promising candidates for efficiently dealing with the decoherence effects inherently present in quantum devices. Numerically, their theoretical error threshold can be calculated by mapping the underlying quantum problem to a related classical statistical-mechanical spin system with quenched disorder. Here, we present results for the general fault-tolerant regime, where we consider both qubit and measurement errors. However, unlike in previous studies, here we vary the strength of the different error sources independently. Our results highlight peculiar differences between toric and color codes. This study complements previous results published in New J. Phys. 13, 083006 (2011).

The tolerance of steers (Bos taurus) to sorghum ergot (Claviceps africana) in a feedlot during the cooler months in sub-tropical Queensland

Two experiments tested the tolerance of steers (Bos taurus) to sorghum ergot (Claviceps africana) during cooler months in south-east Queensland. Sorghum grain containing 2.8% ergot and 28 mg/kg ergot alkaloids (84% dihydroergosine, 10% dihydroelymoclavine, 6% festuclavine) was incorporated into feedlot rations. In a previous study in summer–autumn, ergot (1.1–4.4 mg alkaloids/kg ration) severely reduced performance in steers when the temperature–humidity index (THI; dry bulb temperature °C + 0.36 dew-point temperature °C + 41.2) was ~70, whereas a THI of ~79 was tolerated by steers fed ergot-free rations. Experiment 1 was conducted in winter–spring, with rations containing 0, 2.8, 5.6, 8.2 or 11.2 mg ergot alkaloids/kg ration. All ergot inclusions depressed feed intake (14% average reduction) and growth rate (34% average reduction), even when the weekly average daily THI was less than 65. Rectal temperatures were occasionally elevated in ergot-fed steers (P < 0.05), primarily when the THI exceeded ~65. All ergot inclusions depressed plasma prolactin concentrations in steers. Experiment 2 was predominantly carried out in winter, with weekly average daily THI <65 throughout the experiment. Rations containing 0, 0.28, 0.55 or 1.1 mg ergot alkaloids/kg were fed for 4 weeks but produced no significant effect on feed intakes and growth rates of steers. Alkaloid concentrations were then changed to 0, 2.1, 4.3 and 1.1 mg/kg, respectively. Subsequently, feed intakes declined by 17.5% (P < 0.05), and growth rates by 28% (P > 0.05) in the group receiving 4.3 mg/kg alkaloid, compared with Controls. Plasma prolactin concentrations were depressed, relative to the Controls, by dietary alkaloid inclusion greater than 1.1 mg/kg, with alkaloid intake of 4.3 mg/kg causing the greatest reduction (P < 0.05). Cattle performance in these studies shows steers can tolerate up to ~2 mg ergot alkaloid/kg (0.2% ergot) in feedlot rations under low THI conditions (< ~60–65), but previous findings indicate a much lower threshold will apply at higher THI (>65).

The tolerance of steers (Bos taurus) to sorghum ergot (Claviceps africana) in a feedlot during the cooler months in sub-tropical Queensland

Two experiments tested the tolerance of steers (Bos taurus) to sorghum ergot (Claviceps africana) during cooler months in south-east Queensland. Sorghum grain containing 2.8% ergot and 28 mg/kg ergot alkaloids (84% dihydroergosine, 10% dihydroelymoclavine, 6% festuclavine) was incorporated into feedlot rations. In a previous study in summer–autumn, ergot (1.1–4.4 mg alkaloids/kg ration) severely reduced performance in steers when the temperature–humidity index (THI; dry bulb temperature °C + 0.36 dew-point temperature °C + 41.2) was ~70, whereas a THI of ~79 was tolerated by steers fed ergot-free rations. Experiment 1 was conducted in winter–spring, with rations containing 0, 2.8, 5.6, 8.2 or 11.2 mg ergot alkaloids/kg ration. All ergot inclusions depressed feed intake (14% average reduction) and growth rate (34% average reduction), even when the weekly average daily THI was less than 65. Rectal temperatures were occasionally elevated in ergot-fed steers (P < 0.05), primarily when the THI exceeded ~65. All ergot inclusions depressed plasma prolactin concentrations in steers. Experiment 2 was predominantly carried out in winter, with weekly average daily THI <65 throughout the experiment. Rations containing 0, 0.28, 0.55 or 1.1 mg ergot alkaloids/kg were fed for 4 weeks but produced no significant effect on feed intakes and growth rates of steers. Alkaloid concentrations were then changed to 0, 2.1, 4.3 and 1.1 mg/kg, respectively. Subsequently, feed intakes declined by 17.5% (P < 0.05), and growth rates by 28% (P > 0.05) in the group receiving 4.3 mg/kg alkaloid, compared with Controls. Plasma prolactin concentrations were depressed, relative to the Controls, by dietary alkaloid inclusion greater than 1.1 mg/kg, with alkaloid intake of 4.3 mg/kg causing the greatest reduction (P < 0.05). Cattle performance in these studies shows steers can tolerate up to ~2 mg ergot alkaloid/kg (0.2% ergot) in feedlot rations under low THI conditions (< ~60–65), but previous findings indicate a much lower threshold will apply at higher THI (>65).