Do planning regulations matter? : a comparison of South East Queensland and South Florida

At one level the urban landscapes of South Florida and South East Queensland look quite similar. However at another level the context of planning and planning control and regulation is quite different. To understand the contextual differences between South Florida and South East Queensland, four themes will be used, some of which were based on Cullingworth and Booth. The four themes include: demography, governance, the law and regulatory philosophy. After having evaluated South Florida and South East Queensland across these four themes, we propose a framework for examining whether these differences have shaped planning outcomes and in particular, the built form.

Overview of Australian Civil UAS Regulations and Supporting Research

This presentation provides a review of current civil unmanned aircraft system operations and applications, the operational environment and aviation safety regulations in Australia. A summary of current regulatory reform efforts is also provided. The presentation includes new and existing research programs established to address the technical and social issues facing the unmanned aircraft systems industry and aid the regulatory reform process.

The impact of auditor independence regulations on established and emerging firms.

Purpose – The purpose of this paper is to study whether auditor independence reforms introduced in 2004 led to an enhancement in earnings quality in the post-reform era. Design/methodology/approach – This study predicts that as the cost of compliance will vary based on a firm's existing corporate governance regime and the level of external scrutiny (monitoring) it faces, we compare the earnings quality of a sample of “established” (S&P/ASX 100) to a sample of “emerging” (S&P/ASX Small Ordinaries Index) firms. The paper examines the reporting behaviour of the two groups of listed entities, covering the regulatory change period 2003-2006. The paper uses regression modelling to test the associations between increased audit independence, earnings quality and corporate governance mechanisms over the pre- and post-regulatory period. Findings – The paper's results confirm that earnings quality for the established firms was enhanced in the post-reform period; while this was not the case for emerging firms. The evidence also suggests that corporate governance mechanisms of board independence and board financial skill are associated with higher earnings quality; while the higher the concentration of insider firm ownership is associated with lower earnings quality. Practical implications – This study provides policy makers with evidence as to changes in reporting behaviour following law reform aimed at strengthening auditor independence. Originality/value – The studies on earnings quality are informed by the US market practices. Australia provides a unique setting through its auditor independence reforms to examine the impact of reform choices. This study also investigates two specific subsets of the market: established firms and emerging firms.

Perceived obstacles to multi-storey timber-frame construction : an Australian study

The contemporary default materials for multi-storey buildings – namely concrete and steel – are all significant generators of carbon and the use of timber products provides a technically, economically and environmentally viable alternative. In particular, timber’s sustainability can drive increased use and subsequent evolution of the Blue economy as a new economic model. National research to date, however, indicates a resistance to the uptake of timber technologies in Australia. To investigate this further, a preliminary study involving a convenience sample of 15 experts was conducted to identify the main barriers involved in the use of timber frames in multi-storey buildings. A closed-ended questionnaire survey involving 74 experienced construction industry participants was then undertaken to rate the relative importance of the barriers. The survey confirmed the most significant barriers to be a perceived increase in maintenance costs and fire risk, together with a limited awareness of the emerging timber technologies available. It is expected that the results will benefit government and the timber industry, contributing to environmental improvement by developing strategies to increase the use of timber technologies in multi-storey buildings by countering perceived barriers in the Australian context.

Nano and ultrafine particle number concentrations in different environments : application towards air quality regulations

Particle number concentrations vary significantly with environment and, in this study, we attempt to assess the significance of these differences. Towards this aim, we reviewed 85 papers that have reported particle number concentrations levels at 126 sites covering different environments. We grouped the results into eight categories according to measurement location including: road tunnel, on-road, road-side, street canyon, urban, urban background, rural, and clean background. From these reports, the overall median number concentration for each of the eight site categories was calculated. The eight location categories may be classified into four distinct groups. The mean median particle number locations for these four types were found to be statistically different from each other. Rural and clean background sites had the lowest concentrations of about 3x103 cm-3. Urban and urban background sites showed concentrations that were three times higher (9x103 cm-3). The mean concentration for the street canyon, roadside and on-road measurement sites was 4.6x104 cm-3, while the highest concentrations were observed in the road tunnels (8.6x104 cm-3). This variation is important when assessing human exposure-response for which there is very little data available, making it difficult to develop health guidelines, a basis for national regulations. Our analyses shows that the current levels in environments affected by vehicle emissions are 3 to 28 times higher than in the natural environments. At present, there is no threshold level in response to exposure to ultrafine particles. Therefore, future control and management strategies should target a decrease of these particles in urban environments by more than one order of magnitude to bring them down to the natural background. At present there is a long way to go to achieve this.

Fifield faces a hard road to bring Australia’s media regulations into the 21st century

With his feet barely under the desk, Communications Minister Mitch Fifield has flagged a renewed attempt to change Australia’s media laws. Given his predecessor Malcolm Turnbull’s long-standing interest in the field – dating all the way back to his work with Kerry Packer in the 1980s – Fifield can expect the new prime minister’s backing. Fifield is set to meet with media bosses as early as next week.

Corporate Social Responsibility Assurance: Theory, Regulations and Practice in China

This chapter aims to provide a comprehensive understanding of the theory, regulations and practice of corporate social responsibility (CSR) assurance in China. Built on stakeholder and related theories, it employs a demand-and-supply analytical framework to illustrate the development and current status of China’s CSR assurance market. It finds that government agencies, stock exchanges, accounting standard setters and industrial associations have collectively shaped the current regulatory framework on CSR reporting and assurance in China. Regarding demand, differences in the social and legal environments across such a large country influence the regional development of CSR assurance. Industries under intensive CSR regulations and/or social reporting pressure—for example, the finance, aviation and mining industries—more actively achieve CSR report assurance. Regarding supply, the CSR assurance market in China is shared by accounting firms and professional certification bodies. Different assurance standards adopted by the two streams of assurance providers have different foci, potentially leading to different assurance coverage and emphases.

Effect of surface-applied treatments on the above-ground performance of simulated timber joinery

We examined the effect of surface-applied treatments on the above-ground decay resistance of the tenon of mortice-and-tenon timber joints designed to simulate joinery that is exposed to the weather. Joints made from untreated radiata pine, Douglas-fir, brush box, spotted gum and copper-chrome-arsenic (CCA) treated radiata pine were exposed to the weather for 9 y on above-ground racks at five sites throughout eastern Australia. Results indicate (1) a poorly maintained external paint film generally accelerated decay, (2) a brush coat of water-repellent preservative inside the joints often extended serviceability (in some cases by a factor of up to seven times that of untreated joints) and (3) the level of protection provided by a coat of primer applied inside the joint varied and in most cases was not as effective as the water-repellent preservative treatment.

Field assessment of the resistance of timber products to termite (Isoptera) damage: Results can change with the amount of bait wood

Whether or not termites initiate damage to timber via the end grain may determine the need for spot-treating the exposed untreated cut ends of envelope-treated softwood framing material. Australian Coptotermes acinaciformis (Froggatt) were field-tested for their ability to initiate feeding via the end grain of timber (35 × 90 mm) treated with a repellent Tanalith® T envelope. Specimens of commercial radiata pine Pinus radiata D.Don framing timber (untreated) and slash pine Pinus elliottii Englem. (untreated and envelope-treated) were partially clad in fine stainless steel mesh. Clad and unclad specimens were exposed to C. acinaciformis near Townsville, North Queensland, Australia, for four months. Results showed that this species of termite can indeed damage timber via the end grain, including exposed untreated cut ends of envelope-treated material as demonstrated earlier for different populations of C. acinaciformis. Differences between the test conditions in field trials carried out at different times (where C. acinaciformis either did or did not damage timber via the end grain) are discussed. Clearly, outcomes from field studies with preservative-treated materials are dependent upon experimental conditions. Notably, the amount of bait wood (highly termite-susceptible timber substrate) offered in a given method can strongly influence the termite response. Further investigation is required to standardise this aspect of conditions in protocols for the assessment of wood preservatives.

Labor Regulations and Unionization Trends: Comparative Analysis of Latin American Countries

This paper discusses the influences of labor regulations on unionization rates through the comparative analysis of Argentina, Chile and Mexico, expecting to contribute to the understanding of the determinants of unionization in Latin America. These regulations, though only one of the factors determining unionization levels, have a crucial role, their influence being at least threefold: they define entitlements to and exclusions from the right to unionize, affect union recruitment strategies and, by generating incentives and disincentives, contribute to shape individual membership decisions. After discussing historical aspects of unionization in the three countries, the analysis centers successively in two periods in which the countries compared showed both similarities and contrasts relevant to the analysis of unionization trends. In the first, the comparison is between Argentina (1976-83) and Chile (1973-89), both under military regimes that had much in common, but with contrasting unionization trends. In the second, the focus is in Argentina (1991-2001) and Mexico (1984-2000), where the reforms implemented to liberalize the economy and ensuing social-economic and labor market transformations were similar, but unionization trends differed. It is argued that, in each case, the divergent behavior of unionization, in spite of the similar economic and sociopolitical contexts, may at least partly be attributed to differences in key labor institutions.

Understanding coal seam gas associated water, regulations and strategies for treatment

The coal seam gas (CSG) industry is globally of potentially great importance economically. This study exemplifies the complex relationship between land use and management, groundwater impact and associated water treatment especially in relation to Queensland where a significant increase in the amount of gas extracted over the past 6 years has occurred. In order to effectively manage the environmental impact of the CSG industry it is necessary to appropriately understand the nature of the gas deposits, methods for gas collection, the physicochemical composition of the by-product associated water and the technologies available for water remediation. Australia is mainly considered arid and semi-arid and thus there is a need to not only beneficially reuse water resources but also protect existing ground water reservoirs such as the Great Artesian Basin (GAB). This paper focussed primarily on the Surat Basin located in Queensland and northern New South Wales. The mechanism for CSG formation, relation to local geological features, extraction approach and the potential impact/benefits of associated water was discussed. An outline of the current legislative requirements on physical and chemical properties of associated water in the Surat Basin was also provided, as well as the current treatment technologies used by the major CSG companies. This review was of significance in relation to the formulation of the most appropriate and cost effective management of associated water, while simultaneously preserving existing water resources and the environment.

Accelerated drying of plantation grown Eucalyptus cloeziana and Eucalyptus pellita sawn timber

The objective of this study was to gain an understanding for drying sawn timber produced from fast-grown, well-managed Queensland hardwood plantations using accelerated drying methods. Due to limited resources, this was a preliminary study and further work will be required to optimize schedules for industrial implementation. Three conventional kiln trials, including two for 38-mm-thick, 19-year-old plantation Gympie messmate (Eucalyptus cloeziana F. Muell.) and one for 25mm thick, 15-year-old plantation red mahogany (Eucalyptus pellita F. Muell.), and two vacuum kiln drying trials, one each for 38- and 25mm thick Gympie messmate, were conducted. Measurements of final cross-sectional moisture content, moisture content gradient, residual drying stress, and internal and surface checking were used to quantify dried quality. Drying schedules were chosen based on either existing published schedules or, in the case of the vacuum drying trials, existing schedules for species with similar wood density and dying degrade properties, or manipulated schedules based on the results of trials conducted during this study. The findings indicate that both species can be dried using conventional drying techniques with acceptable grade quality in approximately 75 percent of the drying time that industry is currently achieving when drying native forest timber of the same species. The vacuum drying time was 60 percent less than conventional drying for 38-mm-thick, 19-year-old Gympie messmate, although drying quality needs improving. The findings have shown that through careful schedule manipulation and adjustment, the grade quality can be optimized to suit the desired expectation. Additional research is required to further optimize the schedules to ensure acceptable grade qualities can be reliably achieved across all drying criteria and exploit opportunities to reduce drying times further.

Hydrofluoroalkanes as carrier solvents for timber preservation

Hydrofluoroalkanes are a specific category of hydrofluorocarbon (HFC) commonly used in refrigeration applications. Some HFCs hold potential for use as carrier fluids for preservatives used to protect timber above ground. They do not share the most significant disadvantages of currently used carriers for these applications. At ‘conventional’ operating pressures, they are capable of rapid, full penetration of some timbers generally considered refractory, such as spruce and the heartwood of radiata pine. But they are comparatively expensive and, while they are not detrimental to the ozone layer, they would contribute significantly to the greenhouse effect if released. Impregnation process conditions can be optimised to maximise biocide solubility and impregnation speed and depth.