Utilization of non ferrous metals in boiler combustion environment

The made research is focused on possibility of application of non ferrous metals in boiler pressure parts as a substitute of currently used ferrous-base alloys. The main issue was to define resistive ability of some perspective non ferrous metals to chlorine induced corrosion. Experimental study was performed using simultaneous thermal analysis (STA) in the temperature range of 400-700 °C. The chloride induced corrosion was simulated by mixtures of metal samples with potassium chloride treated by synthetic air. The advantage of synergetic effect of non ferrous alloys compare to single metals is shown due to the obtained data from conducted thermal balance tests.

Post-hatch heat warms adult beaks: irreversible physiological plasticity in Japanese quail

Across taxa, the early rearing environment contributes to adult morphological and physiological variation. For example, in birds, environmental temperature plays a key role in shaping bill size and clinal trends across latitudinal/thermal gradients. Such patterns support the role of the bill as a thermal window and in thermal balance. It remains unknown whether bill size and thermal function are reversibly plastic. We raised Japanese quail in warm (308C) or cold (158C) environments and then at a common intermediate temperature. We predicted that birds raised in cold temperatures would develop smaller bills than warm-reared individuals, and that regulation of blood flow to the bill in response to changing temperatures would parallel the bill’s role in thermal balance. Cold-reared birds developed shorter bills, although bill size exhibited ‘catch-up’ growth once adults were placed at a common temperature. Despite having lived in a common thermal environment as adults, individuals that were initially reared in the warmth had higher bill surface temperatures than coldreared individuals, particularly under cold conditions. This suggests that blood vessel density and/or the control over blood flow in the bill retained a memory of early thermal ontogeny. We conclude that post-hatch temperature reversibly affects adult bill morphology but irreversibly influences the thermal physiological role of bills and may play an underappreciated role in avian energetics

Examining the roles of core and local temperature on forearm skin blood flow

The interaction between local and reflexive control of skin blood flow (SkBF) is unclear. This thesis isolated the roles of rectal (Tre) and local (Tloc) temperature on forearm SkBF regulation at normal and elevated body temperatures, and to investigate the interaction between local and reflexive SkBF control. While either normothermic (Tre ~37.0°C) or hyperthermic (∆Tre +1.1°C), SkBF was assessed on the dorsal aspect of each forearm in 10 participants while Tloc was manipulated in an A-B-A-B fashion between neutral (33.0°C) and hot (38.5°C). Finally, local heating to 44°C was performed to elicit maximal SkBF. Data are presented as a percentage of maximal cutaneous vascular conductance (CVC), calculated as laser-Doppler flux divided by mean arterial pressure. Tloc manipulations performed during normothermia had significantly greater effects on CVC than during hyperthermia. The decreased modification to SkBF from the Tloc changes during hyperthermia suggests that strong reflexive vasodilation attenuates local SkBF control mechanisms.

The dynamics and relationships of precipitation, temperature and convection boundaries in the dayside auroral ionosphere

A continuous band of high ion temperature, which persisted for about 8 h and zigzagged north-south across more than five degrees in latitude in the dayside (07:00– 15:00MLT) auroral ionosphere, was observed by the EISCAT VHF radar on 23 November 1999. Latitudinal gradients in the temperature of the F-region electron and ion gases (Te and Ti , respectively) have been compared with concurrent observations of particle precipitation and field-perpendicular convection by DMSP satellites, in order to reveal a physical explanation for the persistent band of high Ti , and to test the potential role of Ti and Te gradients as possible markers for the open-closed field line boundary. The north/south movement of the equatorward Ti boundary was found to be consistent with the contraction/expansion of the polar cap due to an unbalanced dayside and nightside reconnection. Sporadic intensifications in Ti , recurring on _10-min time scales, indicate that frictional heating was modulated by time-varying reconnection, and the band of high Ti was located on open flux. However, the equatorward Ti boundary was not found to be a close proxy of the open-closed boundary. The closest definable proxy of the open-closed boundary is the magnetosheath electron edge observed by DMSP. Although Te appears to be sensitive to magnetosheath electron fluxes, it is not found to be a suitable parameter for routine tracking of the open-closed boundary, as it involves case dependent analysis of the thermal balance. Finally, we have documented a region of newly-opened sunward convecting flux. This region is situated between the convection reversal boundary and the magnetosheath electron edge defining the openclosed boundary. This is consistent with a delay of several minutes between the arrival of the first (super-Alfv´enic) magnetosheath electrons and the response in the ionospheric convection, conveyed to the ionosphere by the interior Alfv´en wave. It represents a candidate footprint of the low-latitude boundary mixing layer on sunward convecting open flux

Estudo ergonômico sobre o calor

O calor, no ambiente onde o ser humano vive ou trabalha, atribui-se a: -fatores físicos: relação entre temperatura, radiação, umidade e movimento do ar; fatores humanos: o ser humano atua como fonte de energia através de seu metabolismo e atividade física. o calor caracterizado por um determinado meio ambiente é o resultado da atuação de diferentes variáveis, tais como: sistema de construção, situação geográfica do ambiente físico, climatização artificial, etc.; idade, sexo, capacidade física, estado de aclimatação, vestuário, tipo, carga e regime de trabalho, etc. A partir do momento em que o indivíduo for introduzido num determinado meio ambiente térmico, todos estes fatores vão influenciar a transmissão de calor entre ele e o ambiente. Na pretensão de haver equilíbrio térmico no meio ambiente quente, constata-se a necessidade de providenciar medidas de proteção a nível do sujeito e do ambiente, para que prevaleçam situações ambientais "confortáveis", ou pelo menos, "tolerantes". Desse modo, através da: definição das condições térmicas tolerantes e de conforto, parte-se para projetar meios ambientes de trabalho, que tornem praticáveis um isolamento térmico do calor exterior, assim como a perda de calor de dentro para fora. Atuando-se sobre variáveis individuais e ambientais estaremos incidindo diretamente sobre os meios de transmissão, procurando-se diminuir a quantidade de calor que o organismo produz e/ou recebe e aumentar a possibilidade de dissipá-lo.

Uma análise energética da cristalização por resfriamento na indústria da cana-de-açúcar

Os mercados dos produtos oriundos da cana-de-açúcar no mundo vêm sofrendo nos últimos anos mudanças estruturais significativas. No cenário brasileiro, houve grande expansão da produção de cana-de-açúcar, impulsionados pela demanda dos carros flex –fuel, além da oportunidade de suprir o volume de açúcar que a União Europeia deixara de colocar no mercado mundial pela eliminação da subvenção aos exportadores de açúcar do bloco. As incertezas dos mercados exigem mudanças de estratégias de negócio, usinas projetadas para produção exclusiva de etanol, alteram sua estratégia para produção conjunta etanol e açúcar. Apesar dos processos comuns para produção de açúcar e etanol, não significa que essa mudança de estratégia seja fácil de ser efetivada, principalmente pelo aspecto energético. Estudos de processo de produção de açúcar mais eficientes energeticamente, com custos menores tem ganhado força na União Europeia, dentre elas a cristalização do açúcar por resfriamento. Vários cenários produtivos inclusive integrados a produção de etanol tem sido desenvolvidos ao longo dos anos. O objetivo do trabalho foi verificar por comparação de cenários, duas tecnologias de cristalização do açúcar (cozimento e resfriamento), em relação ao impacto nos excedentes de energia elétrica quando a produção de açúcar é adicionada a unidades que produzem somente etanol e energia elétrica. Por meio de simulações dos balanços térmicos dos cenários, observou-se uma restrição importante quando adotado a cristalização por cozimento, no que se refere aos volumes de excedentes de energia elétrica, e que pode ser minimizado se adotado o processo de cristalização por resfriamento, podendo assim ser uma alternativa quando se deseja mudar a estratégia do negócio, de produção exclusiva de etanol e energia elétrica para etanol, açúcar e energia elétrica.

Poluentes atmosféricos: monóxido e dióxido de carbono no nordeste do Brasil

The interference of man in the middle atmosphere can be evidenced by the presence of carbon monoxide, gas associated with burning fossil fuels and carbon dioxide content, essential for respiration of plants and thermal balance of the Earth. In this thesis we initially evaluated the intensity of the spatial distribution of carbon monoxide in the Northeast of Brazil, and subsequently the behavior of temporal variations of the pollutants carbon monoxide and carbon dioxide in the atmospheric boundary layer Maxaranguape / RN. Research has shown that, driven by speculation and promoting the occupation of land for agriculture, cattle ranching and tourism in the Northeast of Brazil, the changes established by the man in the middle geomorphological affect the lower troposphere on a large scale, with a predominance of concentrations in central Pernambuco, Paraiba's south-central and central-west of Alagoas. However, the study of Maxaranguape / RN results showed little variation in carbon monoxide and carbon dioxide, with the speed of the wind persisting with values greater than 7.8 m / s, showing dispersion and diffusion of pollutants which resulted in faster renewal of local atmospheric air

Assessment of body surface temperature in cetaceans: an iterative approach

A transferência de energia térmica da superfície corporal para a água é provavelmente o aspecto mais importante do equilíbrio térmico em mamíferos marinhos, mas os respectivos cálculos dependem do conhecimento da temperatura da superfície, T S, cuja medição direta em animais em liberdade constitui um problema difícil de resolver. Um método iterativo é proposto para a predição de T S de cetáceos em liberdade, a partir da temperatura corporal profunda, da velocidade de deslocamento e da temperatura e propriedades termodinâmicas da água.

Modelagem e avaliação de um sistema de refrigeração por absorção para residências e instalações de pequeno porte

This work presents a study of the absorption refrigeration system and the modeling and evaluation of two cycles using the binary solutions water-lithium bromide and ammonia-water for an equipment to be used in small size plants like residences. The study and evaluation aims the complete understanding of all parts of the system and the influence of each one of them as well as the spread of the knowledge to raise the use of this type of equipment in all sizes in order to decrease the energetic consumption of plants of all scales and making viable the alternative sources. The study is done in each element of the cycle separately and in some auxiliary equipments required in the operation such as the main power source, the solar collector. The software used for modeling, with emphasis on thermal part, was the EES (Engineering Equation Solver), that permitted the thermal balance calculus and acquisition of the used fluids properties. The results obtained for the equipment shows the system is more complex than the widely used in business, however, it can be viable and represents an alternative to increase the energetic efficiency

Thermoregulatory responses of goats in hot environments

Notwithstanding the solar radiation is recognized as a detrimental factor to the thermal balance and responses of animals on the range in tropical conditions, studies on the amount of thermal radiation absorbed by goats therein associated with data on their production and heat exchange are still lacking. Metabolic heat production and the heat exchange of goats in the sun and in the shade were measured simultaneously, aiming to observe its thermal equilibrium. The results showed that black goats absorb twice as much as the white goats under intense solar radiation (higher than 800 W m(-2)). This observation leads to a higher surface temperature of black goats, but it must not be seen as a disadvantage, because they increase their sensible heat flow in the coat-air interface, especially the convection heat flow at high wind speeds. In the shade, no difference between the coat colours was observed and both presented a lower absorption of heat and a lower sensible heat flow gain. When solar radiation levels increases from 300 to 1000 W m(-2), we observed an increase of the heat losses through latent flow in both respiratory and cutaneous surface. Cutaneous evaporation was responsible for almost 90 % of the latent heat losses, independently of the coat colour. Goats decrease the metabolic heat production under solar radiation levels up to 800 W m(-2), and increase in levels higher than this, because there is an increase of the respiratory rate and of the respiratory flow, but the fractions of consumed oxygen and produced carbon dioxide are maintained stable. The respiratory rate of black goats was higher than the white ones, under 300 W m(-2) (55 and 45 resp min(-1)) and 1000 W m(-2) (120 and 95 resp min(-1), respectively). It was concluded that shade or any protection against solar radiation levels above 800 Wm(-2) is critical to guarantee goat's thermal equilibrium. Strategies concerning the grazing period in accordance with the time of the day alone are not appropriate, because the levels of radiation depend on the latitude of the location.

Fisiologia da termorregulação e estresse térmico em ovinos lanados

The introduction of wool sheep in warm temperature regions of Brazil has also raised concerns regarding the warm stress and its consequent decrease in animal production. The understanding of the physiology of thermal balance in sheep, as well as the consequences of this phenomenon, should be studied in order to improve animal thermal comfort in association with the production and reproduction indices of these animals. The majority of available research findings related to thermal balance in sheep is derived from countries with temperate climates and therefore might be different from those performed in our climate conditions. This essay presents a literature review that intends to discuss this theme.

Morphological, chemical and physical characteristics of cryosolic soils from Arctic Canada

Cryosols are permafrost-affected soils whose genesis is dominated by cryogenic processes, resulting in unique macromorphologies, micromorphologies, thermal characteristics, and physical and chemical properties. In addition, these soils are carbon sinks, storing high amounts of organic carbon collected for thousands of years. In the Canadian soil classification, the Cryosolic Order includes mineral and organic soils that have both cryogenic properties and permafrost within 1 or 2 m of the soil surface. This soil order is divided into Turbic, Static and Organic great groups on the basis of the soil materials (mineral or organic), cryogenic properties and depth to permafrost. The great groups are subdivided into subgroups on the basis of soil development and the resulting diagnostic soil horizons. Cryosols are commonly associated with the presence of ground ice in the subsoil. This causes serious problems when areas containing these soils are used for agriculture and construction projects (such as roads, town sites and airstrips). Therefore, where Cryosols have high ice content, it is especially important either to avoid these activities or to use farming and construction methods that maintain the negative thermal balance.

Time required to stabilize thermographic images at rest

Thermography for scientific research and practical purposes requires a series of procedures to obtain images that should be standardized; one of the most important is the time required for acclimatization in the controlled environment. Thus, the objective of this study was to identify the appropriate acclimatization time in rest to reach a thermal balance on young people skin. Forty-four subjects participated in the study, 18 men (22.3 ± 3.1 years) and 26 women (21.7 ± 2.5 years). Thermographic images were collected using a thermal imager (Fluke ®), totaling 44 images over a period of 20 minutes. The skin temperature (TSK) was measured at the point of examination which included the 0 minute, 2, 4, 6, 8, 10, 12, 14, 16, 18 and 20. The body regions of interest (ROI) analyzed included the hands, forearms, arms, thighs, legs, chest and abdomen. We used the Friedman test with post hoc Dunn?s in order to establish the time at rest required to obtain a TSK balance and the Mann-Whitney test was used to compare age, BMI, body fat percentage and temperature variations between men and women, considering always a significance level of pmenor que0.05. Results showed that women had significantly higher temperature variations than men (pmenor que0.01) along the time. In men, only the body region of the abdomen obtained a significant variance (pmenor que0.05) on the analyzed period, both in the anterior and posterior part. In women, the anterior abdomen and thighs, and the posterior part of the hands, forearms and abdomen showed significant differences (pmenor que0.05). Based on our results, it can be concluded that the time in rest condition required reaching a TSK balance in young men and women is variable, but for whole body analysis it is recommended at least 10 minutes for both sexes.

Cálculo y diseño de los principales equipos eléctricos de la isla de potencia de una central de ciclo combinado

El objetivo de este proyecto se centra en la definición, diseño y cálculo de las principales instalaciones eléctricas de la isla de generación, típicas de una central de ciclo combinado en configuración mono-eje. Se procederá a la definición de la arquitectura del sistema de distribución eléctrica de la planta definiendo los equipos eléctricos necesarios para la alimentación y protección de los servicios auxiliares de la isla de potencia y estableciendo una filosofía basada en la optimización del dimensionamiento de los distintos componentes del sistema. El diseño de los componentes eléctricos de la planta se hará en base a los más estrictos estándares internacionales con los que se garantiza el cumplimiento de las condiciones de seguridad, tanto de las personas como la de los propios equipos, fiabilidad y funcionalidad. El siguiente paso consistirá en adaptar los equipos definidos a los existentes en el mercado y así, evitar los sobrecostes que conlleva la adquisición de equipos no estandarizados en el mercado. Abstract The main objective of the project is the definition, analysis and sizing of the main components of the electrical system of a combined cycle power plant. This includes generation, auxiliary services and emergency systems. The design is intended to meet the International Electrotechnical Commission´s standards. These will ensure the adequate and safe operation, taking into account all operation conditions of the plant and the mechanical calculation of the thermal balance by the sizing of main mechanical equipment. An acceptable level of safety and health of workers and equipment is a mandatory requirement. The final results obtained are equipment that are able to achieve the highest level of protection for workers, assets and environment.