A rapid method for testing in vivo the susceptibility of different strains of Trypanosoma cruzi to active chemotherapeutic agents

A method is described which permits to determine in vivo an in a short period of time (4-6 hours) the sensitivity of T. cruzo strains to known active chemotherapeutic agents. By using resistant- and sensitive T. cruzi stains a fairly good correlation was observed between the results obtained with this rapid method (which detects activity against the circulating blood forms) and those obtained with long-term schedules which involve drug adminstration for at least 20 consecutive days and a prolonged period of assessment. This method may be used to characterize susceptibility to active drugs used clinically, provide infomation on the specific action against circulating trypomastigotes and screen active compounds. Differences in the natural susceptibility of Trypanosoma cruzi strains to active drugs have been already reported using different criteria, mostly demanding long-term study of the animal (Hauschka, 1949; Bock, Gonnert & Haberkorn, 1969; Brener, Costa & Chiari, 1976; Andrade & Figueira, 1977; Schlemper, 1982). In this paper we report a method which detects in 4-6 hours the effect of drugs on bloodstream forms in mice with established T. cruzi infections. The results obtained with this method show a fairly good correlation with those obtained by prolonged treatment schedules used to assess the action of drugs in experimental Chagas' disease and may be used to study the sensitivity of T. cruzi strains to active drugs.

The PRINTO criteria for clinically inactive disease in juvenile dermatomyositis.

OBJECTIVES: To develop data-driven criteria for clinically inactive disease on and off therapy for juvenile dermatomyositis (JDM). METHODS: The Paediatric Rheumatology International Trials Organisation (PRINTO) database contains 275 patients with active JDM evaluated prospectively up to 24 months. Thirty-eight patients off therapy at 24 months were defined as clinically inactive and included in the reference group. These were compared with a random sample of 76 patients who had active disease at study baseline. Individual measures of muscle strength/endurance, muscle enzymes, physician's and parent's global disease activity/damage evaluations, inactive disease criteria derived from the literature and other ad hoc criteria were evaluated for sensitivity, specificity and Cohen's κ agreement. RESULTS: The individual measures that best characterised inactive disease (sensitivity and specificity >0.8 and Cohen's κ >0.8) were manual muscle testing (MMT) ≥78, physician global assessment of muscle activity=0, physician global assessment of overall disease activity (PhyGloVAS) ≤0.2, Childhood Myositis Assessment Scale (CMAS) ≥48, Disease Activity Score ≤3 and Myositis Disease Activity Assessment Visual Analogue Scale ≤0.2. The best combination of variables to classify a patient as being in a state of inactive disease on or off therapy is at least three of four of the following criteria: creatine kinase ≤150, CMAS ≥48, MMT ≥78 and PhyGloVAS ≤0.2. After 24 months, 30/31 patients (96.8%) were inactive off therapy and 69/145 (47.6%) were inactive on therapy. CONCLUSION: PRINTO established data-driven criteria with clearly evidence-based cut-off values to identify JDM patients with clinically inactive disease. These criteria can be used in clinical trials, in research and in clinical practice.

Primary resistance of HIV to antiretrovirals among individuals recently diagnosed at voluntary counselling and testing centres in the metropolitan region of Recife, Pernambuco

Determining the prevalence and type of antiretroviral (ARV) resistance among ARV-naïve individuals is important to assess the potential responses of these individuals to first-line regimens. The prevalence of primary resistance and the occurrence of recent infections among individuals with human immunodeficiency virus (HIV)/acquired immune deficiency syndrome (AIDS) were identified among recently diagnosed patients at five sexually transmitted disease/AIDS testing and counselling centres in the metropolitan region of Recife (RMR), Pernambuco, Brazil, between 2007-2009. One-hundred and eight samples were analysed using the Calypte® BED assay. Males predominated (56%), as did patients aged 31-50 years. Twenty-three percent presented evidence of a recent HIV infection. The median CD4+ T lymphocyte count was 408 cells/mm³ and the median viral load was 3.683 copies/mL. The prevalence of primary resistance was 4.6% (confidence interval 95% = 1-8.2%) based on criteria that excluded common polymorphisms in accordance with the surveillance drug resistance mutation criteria. The prevalence of resistance to non-nucleoside reverse transcriptase, nucleoside/nucleotide reverse transcriptase and protease inhibitors were 3.8%, 1.5% and 0.8%, respectively. Fifty-seven percent of strains were from clade B, 37.7% were clade F and 3.1% were clade C; there were no statistically significant differences with respect to resistance between clades. Recent infection tended to be more common in men (p = 0.06) and in municipalities in the south of the RMR (Jaboatão dos Guararapes and Cabo de Santo Agostinho) (p = 0.046). The high prevalence of recent infection and the high prevalence of non-B strains in this poor Brazilian region merit further attention.

Pseudoxanthoma elasticum : evaluation of diagnostic criteria based on molecular data

RÉSUMÉ EN FRANCAIS : Introduction: Le pseudoxanthome élastique (PXE) est une maladie génétique. Les mutations responsables ont été localisées au niveau du gène codant le transporteur transmembranaire ABC-C6. Des calcifications pathologiques des fibres élastiques de la peau, des yeux et du système cardiovasculaire en sont la conséquence. Buts: Evaluer les critères diagnostiques actuels du PXE en se basant sur les données moléculaires. Méthodes: 142 sujets provenant de 10 familles avec une anamnèse familiale positive pour le PXE ont été investiguées sur le plan clinique, histopathologique et génétique. Résultats: 25 sujets se sont avérés être homozygotes pour le gène PXE muté. 23 d'entre eux ont présenté les manifestations cliniques et histopathologique typiques. Les deux autres souffraient d'une élastose et d'une dégénérescence maculaire si importante qu'un diagnostic de PXE ne pouvait pas être confirmé cliniquement. 67 sujets se sont révélés être des porteurs hétérozygotes et 50 ne présentaient pas de mutation. De ces 117 sujets, 116 n'ont montré aucune lésion cutanée ou ophtalmique pouvant correspondre au PXE. Un seul des sujets sans mutation a présenté une importante élastose solaire ainsi qu'une cicatrisation de la rétine, imitant les lésions typiques du PXE. Quatre des 67 sujets hétérozygotes ont eu une biopsie de peau, dont les analyses histopathologique se sont avérées normales. Conclusion: Dans notre cohorte de patients, le PXE était transmis exclusivement de façoh autosomique récessive. La corrélation retrouvée entre le génotype et le phénotype a permis de confirmer les critères diagnostiques majeurs actuels. Le diagnostic clinique peut être difficile, voir impossible, chez des patients atteints d'une élastose solaire importante et/ou d'une dégénérescence maculaire étendue. Dans ces cas, un test moléculaire est nécessaire afin de confirmer le diagnostic de PXE. A notre connaissance, notre étude présentée ici est le premier travail comparant des données cliniques à des données moléculaires dans le domaine du PXE. ABSTRACT : Background: Pseudoxanthoma elasticum (PXE) is a genetic disorder due to mutations in the gene encoding the transmembrane transporter protein adenosine triphosphate binding cassette (ABC)-C6, resulting in calcifications of elastic fibers in the skin, eyes and cardiovascular system. Objectives: To evaluate the diagnostic criteria for PXE based on molecular data. Methods: Of 10 families with a positive history of PXE 142 subjects were investigated for clinical symptoms, histological findings and genetic haplotype analysis. Results: Of these, 25 subjects were haplotypic homozygous for PXE and 23 had typical clinical and histopathological manifestations. Two of the 25 patients showed such marked solar elastosis and macular degeneration that PXE could not be confirmed clinically. Sixty-seven subject were haplotypic heterozygous carriers and 50 haplotypic homozygous unaffected. Of these 117 subjects, 116 showed no cutaneous or ophthalmologic signs of PXE. In one of the 50 haplotypic homozygous unaffected patients important solar elastosis and scaring of the retina mimicked PXE lesions. Only four of the 67 haplotypic heterozygous carriers had biopsies of nonlesional skin; all were histopathologically normal. Conclusions: In our patients, PXE presents as an autosomal recessive genodermatosis. Correlation of haplotype and phenotype confirmed actual major diagnostic criteria. In patients with marked solar elastosis and/ or severe macular degeneration clinical diagnosis can be impossible and molecular testing is needed to confirm the presence of PXE. To the best of our knowledge our large study compares for the first time clinical findings with molecular data.

Development of LRFD Procedures for Bridge Pile Foundations in Iowa: Volume II: Field Testing of Steel Piles in Clay, Sand, and Mixed Soils and Data Analysis, September 2011

In response to the mandate on Load and Resistance Factor Design (LRFD) implementations by the Federal Highway Administration (FHWA) on all new bridge projects initiated after October 1, 2007, the Iowa Highway Research Board (IHRB) sponsored these research projects to develop regional LRFD recommendations. The LRFD development was performed using the Iowa Department of Transportation (DOT) Pile Load Test database (PILOT). To increase the data points for LRFD development, develop LRFD recommendations for dynamic methods, and validate the results ofLRFD calibration, 10 full-scale field tests on the most commonly used steel H-piles (e.g., HP 10 x 42) were conducted throughout Iowa. Detailed in situ soil investigations were carried out, push-in pressure cells were installed, and laboratory soil tests were performed. Pile responses during driving, at the end of driving (EOD), and at re-strikes were monitored using the Pile Driving Analyzer (PDA), following with the CAse Pile Wave Analysis Program (CAPWAP) analysis. The hammer blow counts were recorded for Wave Equation Analysis Program (WEAP) and dynamic formulas. Static load tests (SLTs) were performed and the pile capacities were determined based on the Davisson’s criteria. The extensive experimental research studies generated important data for analytical and computational investigations. The SLT measured loaddisplacements were compared with the simulated results obtained using a model of the TZPILE program and using the modified borehole shear test method. Two analytical pile setup quantification methods, in terms of soil properties, were developed and validated. A new calibration procedure was developed to incorporate pile setup into LRFD.

Analysis of Existing Work-Zone Devices with MASH Safety Performance Criteria, TPF-5(018), 2009

Crashworthy, work-zone, portable sign support systems accepted under NCHRP Report No. 350 were analyzed to predict their safety peformance according to the TL-3 MASH evaluation criteria. An analysis was conducted to determine which hardware parameters of sign support systems would likely contribute to the safety performance with MASH. The acuracy of the method was evaluated through full-scale crash testing. Four full-scale crash tests were conducted with a pickup truck. Two tall-mounted, sign support systems with aluminum sign panels failed the MASH criteria due to windshield penetration. One low-mounted system with a vinyl, roll-up sign panel failed the MASH criteria due to windshield and floorboard penetration. Another low-mounted system with an aluminum sign panel successfully met the MASH criteria. Four full-scale crash tests were conducted with a small passenger car. The low-mounted tripod system with an aluminum sign panel failed the MASH criteria due to windshield penetration. One low-mounted system with aluminum sign panel failed the MASH criteria due to excessive windshield deformation, and another similar system passed the MASH criteria. The low-mounted system with a vinyl, roll-up sign panel successfully met the MASH criteria. Hardware parameters of work-zone sign support systems that were determined to be important for failure with MASH include sign panel material, the height to the top of the mast, the presence of flags, sign-locking mechanism, base layout and system orientation. Flowcharts were provided to assist manufacturers when designing new sign support systems.

The pulmonary embolism rule-out criteria (PERC) rule does not safely exclude pulmonary embolism.

Background: The Pulmonary Embolism Rule-out Criteria (PERC) rule is a clinical diagnostic rule designed to exclude pulmonary embolism (PE) without further testing. We sought to externally validate the diagnostic performance of the PERC rule alone and combined with clinical probability assessment based on the revised Geneva score. Methods: The PERC rule was applied retrospectively to consecutive patients who presented with a clinical suspicion of PE to six emergency departments, and who were enrolled in a randomized trial of PE diagnosis. Patients who met all eight PERC criteria [PERC(-)] were considered to be at a very low risk for PE. We calculated the prevalence of PE among PERC(-) patients according to their clinical pretest probability of PE. We estimated the negative likelihood ratio of the PERC rule to predict PE. Results: Among 1675 patients, the prevalence of PE was 21.3%. Overall, 13.2% of patients were PERC(-). The prevalence of PE was 5.4% [95% confidence interval (CI): 3.1-9.3%] among PERC(-) patients overall and 6.4% (95% CI: 3.7-10.8%) among those PERC(-) patients with a low clinical pretest probability of PE. The PERC rule had a negative likelihood ratio of 0.70 (95% CI: 0.67-0.73) for predicting PE overall, and 0.63 (95% CI: 0.38-1.06) in low-risk patients. Conclusions: Our results suggest that the PERC rule alone or even when combined with the revised Geneva score cannot safely identify very low risk patients in whom PE can be ruled out without additional testing, at least in populations with a relatively high prevalence of PE.

Hydraulic Cement Grout Testing, MLR-89-14, 1990

Currently, hydraulic cement grouts are approved for Iowa Department of Transportation projects on the basis of a pullout test. However, other properties of the grouts should be evaluated. Therefore, this research was initiated to develop criteria to better evaluate hydraulic cement grouts. Fourteen grouts were tested for compressive strength, time of set, durability, consistency and shrinkage. Tested grouts all yielded compressive strengths higher than 3000 psi at 7 days and durability factors were well above 70. Time of set and consistency was adequate. The testing showed most grouts tested shrank, even though tested grouts were labeled non-shrink grouts. For many applications of grouts such as setting in anchor bolts and as a filler, minor shrinkage is not a problem. However, for some critical applications, shrinkage cannot be tolerated. The proposed Instructional Memorandum will identify those grouts which do not excessively shrink or expand in the tests used. Based on test results, criteria for evaluation of hydraulic cement grouts have been recommended. Evaluation consists of tests for compressive strength, time of set, durability, consistency, shrinkage and pullout test.

Development of LRFD Design Procedures for Bridge Piles in Iowa – Field Testing of Steel H-Piles in Clay, Sand, and Mixed Soils and Data Analysis (Volume II), TR-583, 2011

In response to the mandate on Load and Resistance Factor Design (LRFD) implementations by the Federal Highway Administration (FHWA) on all new bridge projects initiated after October 1, 2007, the Iowa Highway Research Board (IHRB) sponsored these research projects to develop regional LRFD recommendations. The LRFD development was performed using the Iowa Department of Transportation (DOT) Pile Load Test database (PILOT). To increase the data points for LRFD development, develop LRFD recommendations for dynamic methods, and validate the results of LRFD calibration, 10 full-scale field tests on the most commonly used steel H-piles (e.g., HP 10 x 42) were conducted throughout Iowa. Detailed in situ soil investigations were carried out, push-in pressure cells were installed, and laboratory soil tests were performed. Pile responses during driving, at the end of driving (EOD), and at re-strikes were monitored using the Pile Driving Analyzer (PDA), following with the CAse Pile Wave Analysis Program (CAPWAP) analysis. The hammer blow counts were recorded for Wave Equation Analysis Program (WEAP) and dynamic formulas. Static load tests (SLTs) were performed and the pile capacities were determined based on the Davisson’s criteria. The extensive experimental research studies generated important data for analytical and computational investigations. The SLT measured load-displacements were compared with the simulated results obtained using a model of the TZPILE program and using the modified borehole shear test method. Two analytical pile setup quantification methods, in terms of soil properties, were developed and validated. A new calibration procedure was developed to incorporate pile setup into LRFD.

Points to consider for prioritizing clinical genetic testing services: a European consensus process oriented at accountability for reasonableness.

Given the cost constraints of the European health-care systems, criteria are needed to decide which genetic services to fund from the public budgets, if not all can be covered. To ensure that high-priority services are available equitably within and across the European countries, a shared set of prioritization criteria would be desirable. A decision process following the accountability for reasonableness framework was undertaken, including a multidisciplinary EuroGentest/PPPC-ESHG workshop to develop shared prioritization criteria. Resources are currently too limited to fund all the beneficial genetic testing services available in the next decade. Ethically and economically reflected prioritization criteria are needed. Prioritization should be based on considerations of medical benefit, health need and costs. Medical benefit includes evidence of benefit in terms of clinical benefit, benefit of information for important life decisions, benefit for other people apart from the person tested and the patient-specific likelihood of being affected by the condition tested for. It may be subject to a finite time window. Health need includes the severity of the condition tested for and its progression at the time of testing. Further discussion and better evidence is needed before clearly defined recommendations can be made or a prioritization algorithm proposed. To our knowledge, this is the first time a clinical society has initiated a decision process about health-care prioritization on a European level, following the principles of accountability for reasonableness. We provide points to consider to stimulate this debate across the EU and to serve as a reference for improving patient management.

Selecting, testing and modifying a model for identifying potential key customers

Tämä työ tehtiin globaaliin elektroniikka-alan yritykseen. Diplomityö liittyy haasteeseen, jonka lisääntynyt globalisaatio ja kiristyvä kilpailu ovat luoneet: case yrityksen on selvitettävä kuinka se voi saavuttaa kasvutavoitteet myös tulevaisuudessa hankkimalla uusia asiakkaita ja olemalla yhä enenevissä määrin maailmanlaajuisesti läsnä. Tutkimuksen tavoite oli löytää sopiva malli potentiaalisten avainasiakkaiden identifiointiin ja valintaan, sekä testata ja modifioida valittua mallia case yrityksen tarpeiden mukaisesti. Erityisesti raakadatan kerääminen, asiakkaiden houkuttelevuuskriteerit ja kohdemarkkinarako olivat asioita, jotka tarvitsivat tutkimuksessa huomiota. Kirjallisuuskatsauksessa keskityttiin yritysmarkkinoihin, eri asiakassuhteenhallinnan lähestymistapoihin ja avainasiakkaiden määrittämiseen. CRM:n, KAM:n ja Customer Insight-ajattelun perusteet esiteltiin yhdessä eri avainasiakkaiden identifiointimallien kanssa. Valittua Chevertonin mallia testattiin ja muokattiin työn empiirisessä osassa. Tutkimuksen empiirinen kontribuutio on modifioitu malli potentiaalisten avainasiakkaiden identifiointiin. Se auttaa päätöksentekijöitä etenemään systemaattisesti ja organisoidusti askel askeleelta kohti potentiaalisten asiakkaiden listaa tietyltä markkina-alueelta. Työ tarjoaa työkalun tähän prosessiin sekä luo pohjaa tulevaisuuden tutkimukselle ja toimenpiteille.

Comparing Etest and Broth Microdilution for Antifungal Susceptibility Testing of the Most-Relevant Pathogenic Molds.

Invasive mold infections are life-threatening diseases for which appropriate antifungal therapy is crucial. Their epidemiology is evolving, with the emergence of triazole-resistant Aspergillus spp. and multidrug-resistant non-Aspergillus molds. Despite the lack of interpretive criteria, antifungal susceptibility testing of molds may be useful in guiding antifungal therapy. The standard broth microdilution method (BMD) is demanding and requires expertise. We assessed the performance of a commercialized gradient diffusion method (Etest method) as an alternative to BMD. The MICs or minimal effective concentrations (MECs) of amphotericin B, voriconazole, posaconazole, caspofungin, and micafungin were assessed for 290 clinical isolates of the most representative pathogenic molds (154 Aspergillus and 136 non-Aspergillus isolates) with the BMD and Etest methods. Essential agreements (EAs) within ±2 dilutions of ≥90% between the two methods were considered acceptable. EAs for amphotericin B and voriconazole were >90% for most potentially susceptible species. For posaconazole, the correlation was acceptable for Mucoromycotina but Etest MIC values were consistently lower for Aspergillus spp. (EAs of <90%). Excellent EAs were found for echinocandins with highly susceptible (MECs of <0.015 μg/ml) or intrinsically resistant (MECs of >16 μg/ml) strains. However, MEC determinations lacked consistency between methods for strains exhibiting mid-range MECs for echinocandins. We concluded that the Etest method is an appropriate alternative to BMD for antifungal susceptibility testing of molds under specific circumstances, including testing with amphotericin B or triazoles for non-Aspergillus molds (Mucoromycotina and Fusarium spp.). Additional study of molecularly characterized triazole-resistant Aspergillus isolates is required to confirm the ability of the Etest method to detect voriconazole and posaconazole resistance among Aspergillus spp.

Optimal and Robust Designs of Step-stress Accelerated Life Testing Experiments for Proportional Hazards Models

Accelerated life testing (ALT) is widely used to obtain reliability information about a product within a limited time frame. The Cox s proportional hazards (PH) model is often utilized for reliability prediction. My master thesis research focuses on designing accelerated life testing experiments for reliability estimation. We consider multiple step-stress ALT plans with censoring. The optimal stress levels and times of changing the stress levels are investigated. We discuss the optimal designs under three optimality criteria. They are D-, A- and Q-optimal designs. We note that the classical designs are optimal only if the model assumed is correct. Due to the nature of prediction made from ALT experimental data, attained under the stress levels higher than the normal condition, extrapolation is encountered. In such case, the assumed model cannot be tested. Therefore, for possible imprecision in the assumed PH model, the method of construction for robust designs is also explored.

Explaining legal norm transmission using an epidemiological model : the case of employment drug testing

Dans cette thèse, nous construisons un modèle épidémiologique de la dissémina- tion de normes juridiques. L’objectif est d’expliquer la transmission de normes juridiques américaines régissant les tests de dépistages pour drogues au travail vers le Canada ainsi que la propagation subséquente de ces normes à travers la jurisprudence canadienne. La propagation des normes régissant les tests de dépistages pour drogues au travail sert donc à la fois de point de départ pour une réflexion théorique sur la transmission de normes juridiques et pour une étude de cas empirique. Nous partons de la prémisse que les explications du changement juridique, telles celle de la transplantation et celle de l’harmonisation, sont essentiellement métaphoriques. Ces métaphores explicatives fonctionnent en invitant des comparaisons entre les domaines connus et inconnus. Quand ce processus de comparaison est systématisé, la métaphore devient un modèle. Dans la thèse, nous appliquons cette procédure de systématisation afin de transformer la métaphore de la propagation virale en modèle épidémiologique. Après une revue de la littérature sur les épidémies sociales, nous décrivons les éléments pertinents de la théorie épidémiologique pour, ensuite, les transposer au domaine juridique. Le modèle est alors opérationnalisé en l’appliquant à une base de données composée de la jurisprudence pertinente (n=187). Les résultats soutiennent les hypothèses du modèle. 90 % des décisions qui citent les sources américaines sont infectées selon les critères du modèle, alors que seulement 64 % des décisions qui ne citent pas de sources américaines sont infectées. Cela soutient l’hypothèse d’une épidémie dite de « réservoir commun ». Nous avons également démontré une corrélation positive entre la référence à ces décisions et l’état d’infection! : 87 % des décisions qui citent des décisions qui réfèrent aux sources américaines sont infectées, alors que le taux d’infection parmi la population restante est de seulement 53 %. Les résultats semblables ont été obtenus pour les décisions de troisième génération. Cela soutient l’hypothèse selon laquelle il y a eu propagation à travers la jurisprudence suite aux contacts initiaux avec le réservoir commun. Des corrélations positives ont aussi été démontrées entre l’état d’infection et l’appartenance à l’une ou l’autre de sous-populations particulières qui seraient, par hypothèse, des points d’infection. En conclusion de la thèse, nous avançons que c’est seulement après avoir construit un modèle et d’avoir constaté ses limites que nous pouvons vraiment comprendre le rôle des métaphores et des modèles dans l’explication de phénomènes juridiques.

Statistical analysis of proficiency testing results under elliptical distributions

The use of inter-laboratory test comparisons to determine the performance of individual laboratories for specific tests (or for calibration) [ISO/IEC Guide 43-1, 1997. Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes] is called Proficiency Testing (PT). In this paper we propose the use of the generalized likelihood ratio test to compare the performance of the group of laboratories for specific tests relative to the assigned value and illustrate the procedure considering an actual data from the PT program in the area of volume. The proposed test extends the test criteria in use allowing to test for the consistency of the group of laboratories. Moreover, the class of elliptical distributions are considered for the obtained measurements. (C) 2008 Elsevier B.V. All rights reserved.