QoS online routing and MPLS multilevel protection: a survey

A survey of MPLS protection methods and their utilization in combination with online routing methods is presented in this article. Usually, fault management methods pre-establish backup paths to recover traffic after a failure. In addition, MPLS allows the creation of different backup types, and hence MPLS is a suitable method to support traffic-engineered networks. In this article, an introduction of several label switch path backup types and their pros and cons are pointed out. The creation of an LSP involves a routing phase, which should include QoS aspects. In a similar way, to achieve a reliable network the LSP backups must also be routed by a QoS routing method. When LSP creation requests arrive one by one (a dynamic network scenario), online routing methods are applied. The relationship between MPLS fault management and QoS online routing methods is unavoidable, in particular during the creation of LSP backups. Both aspects are discussed in this article. Several ideas on how these actual technologies could be applied together are presented and compared

Adding QoS protection in order to enhance MPLS QoS routing

In this paper, a method for enhancing current QoS routing methods by means of QoS protection is presented. In an MPLS network, the segments (links) to be protected are predefined and an LSP request involves, apart from establishing a working path, creating a specific type of backup path (local, reverse or global). Different QoS parameters, such as network load balancing, resource optimization and minimization of LSP request rejection should be considered. QoS protection is defined as a function of QoS parameters, such as packet loss, restoration time, and resource optimization. A framework to add QoS protection to many of the current QoS routing algorithms is introduced. A backup decision module to select the most suitable protection method is formulated and different case studies are analyzed

Full label space reduction in MPLS networks: asymmetric merged tunneling

Traffic Engineering objective is to optimize network resource utilization. Although several works have been published about minimizing network resource utilization in MPLS networks, few of them have been focused in LSR label space reduction. This letter studies Asymmetric Merged Tunneling (AMT) as a new method for reducing the label space in MPLS network. The proposed method may be regarded as a combination of label merging (proposed in the MPLS architecture) and asymmetric tunneling (proposed recently in our previous works). Finally, simulation results are performed by comparing AMT with both ancestors. They show a great improvement in the label space reduction factor

Development of non-intrusive monitoring for reactive switching of high voltage circuit breaker

High-voltage circuit breakers are among the most important equipments for ensuring the efficient and safe operation of an electric power system. On occasion, circuit breaker operators may wish to check whether equipment is performing satisfactorily and whether controlled switching systems are producing reliable and repeatable stress control. Monitoring of voltage and current waveforms during switching using established methods will provide information about the magnitude and frequency of voltage transients as a result of re-ignitions and restrikes. However, high frequency waveform measurement requires shutdown of circuit breaker and use of specialized equipment. Two utilities, Hydro-Québec in Canada and Powerlink Queensland in Australia, have been working on the development and application of a non-intrusive, cost-effective and flexible diagnostic system for monitoring high-voltage circuit breakers for reactive switching. The proposed diagnostic approach relies on the non-intrusive assessment of key parameters such as operating times, prestrike characteristics, re-ignition and restrike detection. Transient electromagnetic emissions have been identified as a promising means to evaluate the abovementioned parameters non-intrusively. This paper describes two complimentary methods developed concurrently by Powerlink and Hydro-Québec. Also, return of experiences on the application to capacitor bank and shunt reactor switching is presented.

Enterprise architecture model: an approach proposition. A case study of information systems in the hospitality industry

This paper discusses the role of enterprise architecture representation, in the context of ERP (Enterprise Resource Planning) information systems, as an instrument for an organization to reflect on itself and develop its business strategies and respective alignment with Information Systems. The paper proposes a representation model of enterprise architecture, as a tool for recommending good practices, and it emerges from a case study undertaken in the context of and investigation on advantages and limitations of ERP systems in the hospitality industry. The proposed approach is also inspired on other academic or market propositions suitable for the objectives of the investigation. It consists on a set of items representing the steps that must be taken by top managers and IS managers.

Lead free heterogeneous multilayers with giant magneto electric coupling for microelectronics/microelectromechanical systems applications

Lead free magneto electrics with a strong sub resonant (broad frequency range) magneto electric coupling coefficient (MECC) is the goal of the day which can revolutionise the microelectronics and microelectromechanical systems (MEMS) industry. We report giant resonant MECC in lead free nanograined Barium Titanate–CoFe (Alloy)-Barium Titanate [BTO-CoFe-BTO] sandwiched thin films. The resonant MECC values obtained here are the highest values recorded in thin films/ multilayers. Sub-resonant MECC values are quite comparable to the highest MECC reported in 2-2 layered structures. MECC got enhanced by two orders at a low frequency resonance. The results show the potential of these thin films for transducer, magnetic field assisted energy harvesters, switching devices, and storage applications. Some possible device integration techniques are also discussed

Variable structure control of switched systems based on Lyapunov-Metzler-SPR systems

This paper presents two Variable Structure Controllers (VSC) for continuous-time switched plants. It is assumed that the state vector is available for feedback. The proposed control system provides a switching rule and also the variable structure control input. The design is based on Lyapunov-Metzler (LM) inequalities and also on Strictly Positive Real (SPR) systems stability results. The definition of Lyapunov-Metzler-SPR (LMS) systems and its direct application in the design of VSC for switched systems are introduced in this paper. Two examples illustrate the design of the proposed VSC, considering a plant given by a switched system with a switched-state control law and two linear time-invariant systems, that are not controllable and also can not be stabilized with state feedback. ©2008 IEEE.

Telecommunications equipment /

"October 1994."

Exchanging data between Digital Human Modelling systems : a review of data formats

Digital human modeling (DHM) systems underwent significant development within the last years. They achieved constantly growing importance in the field of ergonomic workplace design, product development, product usability, ergonomic research, ergonomic education, audiovisual marketing and the entertainment industry. They help to design ergonomic products as well as healthy and safe socio-technical work systems. In the domain of scientific DHM systems, no industry specific standard interfaces are defined which could facilitate the exchange of 3D solid body data, anthropometric data or motion data. The focus of this article is to provide an overview of requirements for a reliable data exchange between different DHM systems in order to identify suitable file formats. Examples from the literature are discussed in detail. Methods: As a first step a literature review is conducted on existing studies and file formats for exchanging data between different DHM systems. The found file formats can be structured into different categories: static 3D solid body data exchange, anthropometric data exchange, motion data exchange and comprehensive data exchange. Each file format is discussed and advantages as well as disadvantages for the DHM context are pointed out. Case studies are furthermore presented, which show first approaches to exchange data between DHM systems. Lessons learnt are shortly summarized. Results: A selection of suitable file formats for data exchange between DHM systems is determined from the literature review.

Boundary crossing: A theoretical framework to understand the operation dynamics of industry-school partnerships

Industry-school partnerships (ISPs) are increasingly being recognised as a new way of providing vocational education opportunities. However, there is limited research investigating their impact on systemic (organisational and structural) and human resource (teachers and education managers) capacity to support school to work transitions. This paper reports on a government led ISP, established by the Queensland state government. ISPs across three industry sectors: minerals and energy; building and construction; and aviation are included in this study. This research adopted a qualitative case study methodology and draws upon boundary crossing theory to understand the dynamics of how each industry sector responded to systemic and human resource issues that emerged in each ISP. The main finding being that the systematic application of boundary crossing mechanisms by all partners pro-duced mutually beneficial outcomes. ISPs from the three sectors adopted different models, leveraged different boundary crossing objects but all maintained the joint vision and mutually agreed outcomes. All three ISPs genuinely crossed boundaries, albeit in different ways, and assisted teachers to co-pro-duce industry-based curriculums, share sector specific knowledge and skills that help enhance the school to work transition for school graduates.

Structural effects on the pH-dependent fluorescence of naphthalenic derivatives and consequences for sensing/switching

Naphthalenic compounds are a rich resource for designers of fluorescent sensing/switching/logic systems. The degree of internal charge transfer (ICT) character in the fluorophore excited states can vary from negligible to substantial. Naphthalene-1,8;4,5-diimides (11–13), 1,8-naphthalimides (16) and 4-chloro-1,8-naphthalimides (15) are of the former type. The latter type is represented by the 4-alkylamino-1,8-naphthalimides (1). Whether ICT-based or not, these serve as the fluorophore in ‘fluorophore-spacer-receptor’ switching systems where PET holds sway until the receptor is bound to H+. On the other hand, 4-dialkylamino-1,8-naphthalimides (3–4) show modest H+-induced fluorescence switching unless the 4-dialkylamino group is a part of a small ring (5). Electrostatic destabilization of a non-emissive twisted internal charge transfer (ICT) excited state is the origin of this behaviour. An evolution to the non-emissive twisted ICT excited state is responsible for the weak emission of the model compound 6 (and related structures 7 and 8) across the pH range. Twisted ICT excited states are also implicated in the switch 9 and its model compound 10, which are based on the 6-dialkylamino-3H-benzimidazo[2,1-a]benz[d,e]isoquinolin-3-one fluorophore.

International comparisons of construction industry performance: further investigations

While there have been many attempts at comparisons of construction performance over the past 50 years, the results have generally been inconclusive and/or contradictory.

Such comparisons are of great interest to industry, governments and theorists alike but there is little agreement as to how they are best done. A variety of methodologies have been used, however, the lack of satisfactory outcomes has been due largely to one factor, the lack of a truly reliable method for comparing construction costs in different currencies

Exchange rates are recognised as being unsuitable, and while purchasing power parity (PPP) has a long history, the method still has many critics. In addition, the nature of the building industry and its products makes the establishment of reliable construction PPPs very difficult. Both the UN’s International Comparison Program (ICP) and the European Union gather data for the production of construction-specific PPP indices, but neither body publishes them, as there is too much doubt about their reliability.

New approaches are being developed and some are soon to be trialled. This paper looks at the problems, describes and discusses some new approaches, and assesses their potential.

Transforming value perception in music information systems

Information systems are changing the way artists and consumers create, use and interact with music. Music experience has become richer and more sophisticated than simply buying and listening to music. New links between IS and music are forging unprecedented levels of creative e-collaboration, innovative music technology development, new music commerce and marketing methods, alongside with the emergence of e-music communities nurturing up-and-coming artists careers. Distinct from non-creative industries, the music industry is at the forefront of technological innovation where the ubiquitous adoption of music downloading, widespread use of personal music systems, and value chain disintermediation has shifted the focus of value delivery towards consumer control. This paper provides new insights into the effect of recent technological change on stakeholders within the music industry value chain, and of music information systems upon creative music products. The paper further explores the stakeholder perceptions of the value added or depleted from music by the technology, and examines the future expectations of information systems amidst the volatility and uncertainty of the music industry.

Integrated aquaculture systems approach to multi water-use in irrigated agriculture.

This study explored feasibility of an integrated agri-aquaculture systems (IAAS) approach to multiple water-use within Australian irrigated agriculture, emphasising adding value and sustainability to water resources. It focussed on development, demonstration and evaluation of a case-study of IAAS-based, open-water production of Murray cod in the Sunraysia Irrigation Region, NW Victoria.

LMI-based digital redesign of linear time-invariant systems with state-derivative feedback

A simple method for designing a digital state-derivative feedback gain and a feedforward gain such that the control law is equivalent to a known and adequate state feedback and feedforward control law of a digital redesigned system is presented. It is assumed that the plant is a linear controllable, time-invariant, Single-Input (SI) or Multiple-Input (MI) system. This procedure allows the use of well-known continuous-time state feedback design methods to directly design discrete-time state-derivative feedback control systems. The state-derivative feedback can be useful, for instance, in the vibration control of mechanical systems, where the main sensors are accelerometers. One example considering the digital redesign with state-derivative feedback of a helicopter illustrates the proposed method. © 2009 IEEE.