大模场面积光纤激光器拉锥法模式选择

大模场面积(LMA)光纤激光器的光束质量通常比单模光纤激光器的光束质量差。采用光纤拉锥的方法进行模式选择,从而提高大模场直径光纤激光器的光束质量。拉锥区距光纤激光器的输出端约5 mm,纤芯最小为9 μm,约为未拉锥部分纤芯直径26 μm的1/3。实验研究表明,在拉锥后,光纤激光器的光束质量因子M2由3.50减小为1.81,相应的斜率效率由63.6%减小为51.1%。虽然拉锥后最大输出功率减少了约19.8%,但其亮度增大为拉锥前的3倍。

Tracking migratory salmonids

The River Ribble drains into the Irish sea on the West coast of England. The estuary is approximately 20Km long, tunnel shaped, tapering from a 100m width at Preston dock to 5 km at Lytham where it enters the sea. This is a preliminary report on a study of oxygen requirements of Atlantic salmon (Salmo salar)and sea trout (Salmo trutta) in an estuary. Oxygen sending transmitters attached to fish were used to determine exposure of individuals to different dissolved oxygen concentrations as they moved in from the sea through the estuary of the River Ribble. This estuary is subject to extreme variations in dissolved oxygen concentrations. This report is based on the latest transcription and analysis of data completed in October 1983. The aim of this report is to give an overview of the work done and conclusions which are apparent at this stage.

Velocity profiles in a cylindrical liquid jet by reconstructed velocimetry

An experimental setup and a simple reconstruction method are presented to measure velocity fields inside slightly tapering cylindrical liquid jets traveling through still air. Particle image velocimetry algorithms are used to calculate velocity fields from high speed images of jets of transparent liquid containing seed particles. An inner central plane is illuminated by a laser sheet pointed at the center of the jet and visualized through the jet by a high speed camera. Optical distortions produced by the shape of the jet and the difference between the refractive index of the fluid and the surrounding air are corrected by using a ray tracing method. The effect of the jet speed on the velocity fields is investigated at four jet speeds. The relaxation rate for the velocity profile downstream of the nozzle exit is reasonably consistent with theoretical expectations for the low Reynolds numbers and the fluid used, although the velocity profiles are considerably flatter than expected. © 2012 American Society of Mechanical Engineers.

Precursor flow rate manipulation for the controlled fabrication of twin-free GaAs nanowires on silicon substrates

Vertically oriented GaAs nanowires (NWs) are grown on Si(111) substrates using metal-organic chemical vapor deposition. Controlled epitaxial growth along the 111 direction is demonstrated following the deposition of thin GaAs buffer layers and the elimination of structural defects, such as twin defects and stacking faults, is found for high growth rates. By systematically manipulating the AsH 3 (group-V) and TMGa (group-III) precursor flow rates, it is found that the TMGa flow rate has the most significant effect on the nanowire quality. After capping the minimal tapering and twin-free GaAs NWs with an AlGaAs shell, long exciton lifetimes (over 700ps) are obtained for high TMGa flow rate samples. It is observed that the Ga adatom concentration significantly affects the growth of GaAs NWs, with a high concentration and rapid growth leading to desirable characteristics for optoelectronic nanowire device applications including improved morphology, crystal structure and optical performance. © 2012 IOP Publishing Ltd.

Defect-free GaAs/AlGaAs Core-shell nanowires on Si substrates

We report straight and vertically aligned defect-free GaAs nanowires grown on Si(111) substrates by metal-organic chemical vapor deposition. By deposition of thin GaAs buffer layers on Si substrates, these nanowires could be grown on the buffer layers with much less stringent conditions as otherwise imposed by epitaxy of III-V compounds on Si. Also, crystal-defect-free GaAs nanowires were grown by using either a two-temperature growth mode consisting of a short initial nucleation step under higher temperature followed by subsequent growth under lower temperature or a rapid growth rate mode with high source flow rate. These two growth modes not only eliminated planar crystallographic defects but also significantly reduced tapering. Core-shell GaAs-AlGaAs nanowires grown by the two-temperature growth mode showed improved optical properties with strong photoluminescence and long carrier life times. © 2011 American Chemical Society.

Vertically standing Ge nanowires on GaAs(110) substrates.

The growth of epitaxial Ge nanowires is investigated on (100), (111) B and (110) GaAs substrates in the growth temperature range from 300 to 380 °C. Unlike epitaxial Ge nanowires on Ge or Si substrates, Ge nanowires on GaAs substrates grow predominantly along the [Formula: see text] direction. Using this unique property, vertical [Formula: see text] Ge nanowires epitaxially grown on GaAs(110) surface are realized. In addition, these Ge nanowires exhibit minimal tapering and uniform diameters, regardless of growth temperatures, which is an advantageous property for device applications. Ge nanowires growing along the [Formula: see text] directions are particularly attractive candidates for forming nanobridge devices on conventional (100) surfaces.

Influence of nanowire density on the shape and optical properties of ternary InGaAs nanowires.

We have synthesized ternary InGaAs nanowires on (111)B GaAs surfaces by metal-organic chemical vapor deposition. Au colloidal nanoparticles were employed to catalyze nanowire growth. We observed the strong influence of nanowire density on nanowire height, tapering, and base shape specific to the nanowires with high In composition. This dependency was attributed to the large difference of diffusion length on (111)B surfaces between In and Ga reaction species, with In being the more mobile species. Energy dispersive X-ray spectroscopy analysis together with high-resolution electron microscopy study of individual InGaAs nanowires shows large In/Ga compositional variation along the nanowire supporting the present diffusion model. Photoluminescence spectra exhibit a red shift with decreasing nanowire density due to the higher degree of In incorporation in more sparsely distributed InGaAs nanowires.

Au-catalyzed InP nanowires: The influence of growth temperature and V/III ratio

Growth of Au-catalyzed InP nanowires (NWs) by metalorganic chemical vapor deposition (MOCVD) has been studied in the temperature range of 400-510 °C and V/III ratio of 44-700. We demonstrate that minimal tapering of InP NWs can be achieved at 400 °C and V/III ratio of 350. Zinc-blende (ZB) or wurtzite (WZ) NWs is obtained depending on the growth conditions. 4K microphotoluminescence (μ-PL) studies show that emission energy is blue-shifted as growth temperature increases. By changing these growth parameters, one can tune the emission wavelength of InP NWs which is attractive for applications in developing novel optoelectronic devices. © 2010 IEEE.

High purity GaAs nanowires free of planar defects: Growth and characterization

We investigate how to tailor the structural, crystallographic and optical properties of GaAs nanowires. Nanowires were grown by Au nanoparticle-catalyzed metalorganic chemical vapor deposition. A high arsine flow rate, that is, a high ratio of group V to group III precursors, imparts significant advantages. It dramatically reduces planar crystallographic defects and reduces intrinsic carbon dopant incorporation. Increasing V/III ratio further, however, instigates nanowire kinking and increases nanowire tapering. By choosing an intermediate V/III ratio we achieve uniform, vertically aligned GaAs nanowires, free of planar crystallographic defects, with excellent optical properties and high purity. These findings will greatly assist the development of future GaAs nanowire-based electronic and optoelectronic devices, and are expected to be more broadly relevant to the rational synthesis of other III-V nanowires. © 2008 WILEY-VCH Verlag GmbH & Co. KGaA.

Optimised two-temperature growth of GaAs nanowire s by metalorganic chemical vapour deposition

We report a two-temperature procedure for the growth of GaAs nanowires by metalorganic chemical vapour deposition. An initial high temperature step affords effective nucleation and promotes epitaxial growth of straight (111)B-oriented nanowires. Lower temperatures are employed subsequently, to minimise nanowire tapering during growth. © 2006 IEEE.

KHAWIA SAUROGOBII N. SP (CESTODA: CARYOPHYLLIDEA) FROM FRESHWATER FISH SAUROGOBIO SPP. (CYPRINIDAE) IN CHINA

Khawia saurogobii n. sp. is described from the intestine of the cyprinid fishes Saurogobio dabryi and Saurogobio dumerili in China. The new species belongs to the Lytocestidae and is placed in Khawia because of its afossate scolex, vitelline follicles in the cortical parenchyma, uterus not looping anterior to the cirrus sac, gonopores separate but close together in distinct genital atrium, external seminal vesicle absent, and postovarian follicles present. The new species differs from other congeneric species by the shape of the body markedly tapering posteriorly from the end of the anterior third, the shape of the scolex that is very short and markedly wider than the neck, spatulate without incisions, but shallow superficial grooves, vitelline follicles and testes starting immediately posterior to the scolex, and an ovary with long, posterior arms bent medially, thus giving the shape of an inverted A.

Optical micro- and nanofibres: Higher mode generation and particle manipulation studies

This thesis is centred on two experimental fields of optical micro- and nanofibre research; higher mode generation/excitation and evanescent field optical manipulation. Standard, commercial, single-mode silica fibre is used throughout most of the experiments; this generally produces high-quality, single-mode, micro- or nanofibres when tapered in a flame-heated, pulling rig in the laboratory. Single mode fibre can also support higher transverse modes, when transmitting wavelengths below that of their defined single-mode regime cut-off. To investigate this, a first-order Laguerre-Gaussian beam, LG01 of 1064 nm wavelength and doughnut-shaped intensity profile is generated free space via spatial light modulation. This technique facilitates coupling to the LP11 fibre mode in two-mode fibre, and convenient, fast switching to the fundamental mode via computer-generated hologram modulation. Following LP11 mode loss when exponentially tapering 125μm diameter fibre, two mode fibre with a cladding diameter of 80μm is selected fir testing since it is more suitable for satisfying the adiabatic criteria for fibre tapering. Proving a fruitful endeavour, experiments show a transmission of 55% of the original LP11 mode set (comprising TE01, TM01, HE21e,o true modes) in submicron fibres. Furthermore, by observing pulling dynamics and progressive mode-lass behaviour, it is possible to produce a nanofibre which supports only the TE01 and TM01 modes, while suppressing the HE21e,o elements of the LP11 group. This result provides a basis for experimental studies of atom trapping via mode-interference, and offers a new set of evanescent field geometries for sensing and particle manipulation applications. The thesis highlights the experimental results of the research unit’s Cold Atom subgroup, who successfully integrated one such higher-mode nanofibre into a cloud of cold Rubidium atoms. This led to the detection of stronger signals of resonance fluorescence coupling into the nanofibre and for light absorption by the atoms due to the presence of higher guided modes within the fibre. Theoretical work on the impact of the curved nanofibre surface on the atomic-surface van der Waals interaction is also presented, showing a clear deviation of the potential from the commonly-used flat-surface approximation. Optical micro- and nanofibres are also useful tools for evanescent-field mediated optical manipulation – this includes propulsion, defect-induced trapping, mass migration and size-sorting of micron-scale particles in dispersion. Similar early trapping experiments are described in this thesis, and resulting motivations for developing a targeted, site-specific particle induction method are given. The integration of optical nanofibres into an optical tweezers is presented, facilitating individual and group isolation of selected particles, and their controlled positioning and conveyance in the evanescent field. The effects of particle size and nanofibre diameter on pronounced scattering is experimentally investigated in this systems, as are optical binding effects between adjacent particles in the evanescent field. Such inter-particle interactions lead to regulated self-positioning and particle-chain speed enhancements.

Constructal dendritic configuration for the radiation heating of a solid stream

Here we show that the configuration of a slender enclosure can be optimized such that the radiation heating of a stream of solid is performed with minimal fuel consumption at the global level. The solid moves longitudinally at constant rate through the enclosure. The enclosure is heated by gas burners distributed arbitrarily, in a manner that is to be determined. The total contact area for heat transfer between the hot enclosure and the cold solid is fixed. We find that minimal global fuel consumption is achieved when the longitudinal distribution of heaters is nonuniform, with more heaters near the exit than the entrance. The reduction in fuel consumption relative to when the heaters are distributed uniformly is of order 10%. Tapering the plan view (the floor) of the heating area yields an additional reduction in overall fuel consumption. The best shape is when the floor area is a slender triangle on which the cold solid enters by crossing the base. These architectural features recommend the proposal to organize the flow of the solid as a dendritic design, which enters as several branches, and exits as a single hot stream of prescribed temperature. The thermodynamics of heating is presented in modern terms in the Sec. (exergy destruction, entropy generation). The contribution is that to optimize "thermodynamically" is the same as reducing the consumption of fuel. © 2010 American Institute of Physics.

A Multicenter, Randomised Open Study of Early Corticosteroid Treatment (OSECT) in Preterm Infants With Respiratory Illness: Comparison of Early and Late Treatment and of Dexamethasone and Inhaled Budesonide

AIM: To compare early (15 days) steroid therapy and dexamethasone with inhaled budesonide in very preterm infants at risk of developing chronic lung disease. METHODS: Five hundred seventy infants from 47 neonatal intensive care units were enrolled. Criteria for enrollment included gestational age 30%. Infants were randomly allocated to 1 of 4 treatment groups in a factorial design: early (15 days) dexamethasone, and delayed selective budesonide. Dexamethasone was given in a tapering course beginning with 0.50 mg/kg/day in 2 divided doses for 3 days reducing by half until 12 days of therapy had elapsed. Budesonide was administered by metered dose inhaler and a spacing chamber in a dose of 400 microg/kg twice daily for 12 days. Delayed selective treatment was started if infants needed mechanical ventilation and >30% oxygen for >15 days. The factorial design allowed 2 major comparisons: early versus late treatment and systemic dexamethasone versus inhaled budesonide. The primary outcome was death or oxygen dependency at 36 weeks and analysis was on an intention-to-treat basis. Secondary outcome measures included death or major cerebral abnormality, duration of oxygen treatment, and complications of prematurity. Adverse effects were also monitored daily. RESULTS: There were no significant differences among the groups for the primary outcome. Early steroid treatment was associated with a lower primary outcome rate (odds ratio [OR]: 0.85; 95% confidence interval [CI]: 0.61,1.18) but even after adjustment for confounding variables the difference remained nonsignificant. Dexamethasone-treated infants also had a lower primary outcome rate (OR: 0.86; 95% CI: 0.62,1.20) but again this difference remained not significant after adjustment. For death before discharge, dexamethasone and early treatment had worse outcomes than budesonide and delayed selective treatment (OR: 1.42; 95% CI: 0.93,2.16; OR: 1.51; 95% CI: 0.99,2.30 after adjustment, respectively) with the results not quite reaching significance. Duration of supplementary oxygen was shorter in the early dexamethasone group (median: 31 days vs 40-44 days). Early dexamethasone was also associated with increased weight loss during the first 12 days of treatment (52 g vs 3 g) compared with early budesonide, but over 30 days there was no difference. In the early dexamethasone group, there was a reduced incidence of persistent ductus arteriosus (34% vs 52%-59%) and an increased risk of hyperglycemia (55% vs 29%-34%) compared with the other 3 groups. Dexamethasone was associated with an increased risk of hypertension and gastrointestinal problems compared with budesonide but only the former attained significance. CONCLUSIONS: Infants given early treatment and dexamethasone therapy had improved survival without chronic lung disease at 36 weeks compared with those given delayed selective treatment and inhaled budesonide, respectively, but results for survival to discharge were in the opposite direction; however, none of these findings attained statistical significance. Early dexamethasone treatment reduced the risk of persistent ductus arteriosus. Inhaled budesonide may be safer than dexamethasone, but there is no clear evidence that it is more or less effective

Mosaic monosomy 14: clinical features and recognizable facies

A 1-year-old child with clinical features of monosomy 14 is reported. She has dysmorphic facial features including ocular colobomata, dolichocephaly and microcephaly, retinal pigmentation, severe seizures, fair curly hair and tapering fingers. There was severe mental retardation. This is the first reported case of severe mosaic monosomy 14, with up to 30% mosaicism. A recognizable facial gestalt is present in children with 14q deletions or partial monosomy 14, as well as susceptibility to infection, feeding difficulties, seizures and retinal pigmentation. (C) 2004 Lippincott Williams Wilkins.