Synthesis, characterization, and photophysical properties of rare earth complexes of N-phenyl-2-aminobenzoic acid and 1,10-phenanthroline

Some novel binary and ternary complexes of rare earth ions (Gd, Eu, Tb) with N-phenyl-2-aminobenzoic acid and 1,10-phenanthroline were synthesized by homogenous precipitation and characterized by elemental analysis, IR spectra, UV/Vis spectra, and thermal analysis. The phosphorescence spectra and lifetimes of gadolinium complexes were measured, and the triplet state energies of N-phenyl-2-aminobenzoic acid and 1,10-phenanthroline as well as the energy transfer efficiencies between N-phenyl-2-aminobenzoic acid and 1,10-phenanthroline were determined. The photophysical properties such as luminescence and intramolecular energy transfer between the rare earth center ions and the ligands and between ligands are discussed.

Wastewater irrigation: the state of play

As demand for fresh water intensifies, wastewater is frequently being seen as a valuable resource. Furthermore, wise reuse of wastewater alleviates concerns attendant with its discharge to the environment. Globally, around 20 million ha of land are irrigated with wastewater, and this is likely to increase markedly during the next few decades as water stress intensifies. In 1995, around 2.3 billion people lived in water-stressed river basins and this could increase to 3.5 billion by 2025. We review the current status of wastewater irrigation by providing an overview of the extent of the practice throughout the world and through synthesizing the current understanding of factors influencing sustainable wastewater irrigation. A theme that emerges is that wastewater irrigation is not only more common in water-stressed regions such as the Near East, but the rationale for the practice also tends to differ between the developing and developed worlds. In developing nations, the prime drivers are livelihood dependence and food security, whereas environmental agendas appear to hold greater sway in the developed world. The following were identified as areas requiring greater understanding for the long-term sustainability of wastewater irrigation: (i) accumulation of bioavailable forms of heavy metals in soils, (ii) environmental fate of organics in wastewater-irrigated soils, (iii) influence of reuse schemes on catchment hydrology, including transport of salt loads, (iv) risk models for helminth infections (pertinent to developing nations), (v) microbiological contamination risks for aquifers and surface waters, (vi) transfer efficiencies of chemical contaminants from soil to plants, (vii) health effects of chronic exposure to chemical contaminants, and (viii) strategies for engaging the public.

Visible to infrared energy conversion in Pr3+-Yb3+ co-doped fluoroindate glasses

Processes involving visible to infrared energy conversion are presented for Pr3+-Yb3+ co-doped fluoroindate glasses. The emission in the visible and infrared regions, the luminescence decay time of the Pr 3+:3P0 → 3H4 (482 nm), Pr3+:1D2 → 3H6 (800 nm), Yb3+:2F5/2 → 2F 7/2 (1044 nm) transitions and the photoluminescence excitation spectra were measured in Pr3+ samples and in Pr3+-Yb 3+ samples as a function of the Yb3+ concentration. In addition, energy transfer efficiencies were estimated from Pr3+: 3P0 and Pr3+:1D2 levels to Yb3+:2F7/2 level. Down-Conversion (DC) emission is observed due to a combination of two different processes: 1-a one-step cross relaxation (Pr3+:3P0 → 1G4; Yb3+:2F7/2 → 2F5/2) resulting in one photon emitted by Pr3+ (1G4 → 3H5) and one photon emitted by Yb3+ (2F7/2 → 2F5/2); 2-a resonant two-step first order energy transfer, where the first part of energy is transferred to Yb3+ neighbor through cross relaxation (Pr3+:3P0 → 1G4; Yb3+:2F7/2 → 2F5/2) followed by a second energy transfer step (Pr 3+:1G4 → 3H4; Yb3+:2F7/2 → 2F5/2). A third process leading to one IR photon emission to each visible photon absorbed involves cross relaxation energy transfer (Pr3+: 1D2 → 3F4; Yb 3+:2F7/2 → 2F5/2). © 2013 Elsevier B.V. All rights reserved.

Biomimetisches Modell eines Photosystems aus dem pflanzlichen Photosyntheseapparat

In dieser Arbeit wurde ein biomimetisches Modell für ein pflanzliches Photosystem bestehend aus dem rekombinanten Hauptlichtsammlerkomplex (LHCII) als Absorptions- und Energietransfereinheit und einem N-terminal an das Protein gebundenen Farbstoff als Energieakzeptor hergestellt. Mehrere LHCII-Farbstoff-Konstrukte wurden getestet, die höchste Energietransfereffizienz von komplexgebundenem Chlorophyll-a zum Energieakzeptor konnte an einem LHCII-Benzoylterrylendicarboximid-Konstrukt gemessen werden. Bei Raumtemperatur wurde hier 70% der Chlorophyll-a-Anregungsenergie auf den Farbstoff übertragen, bei 77 K sogar 85%. LHCII-Farbstoffkonstrukte können helfen, strukturelle und funktionelle Eigenschaften des LHCII näher zu beleuchten. So konnte bereits in dieser Arbeit gezeigt werden, daß der N-Terminus des Komplexes im zeitlichen Mittel in eine größere Annäherung zum pigmentierten Teil des LHCII kommen muß, sonst sind Energietransfereffizienzen obiger Größenordnung nicht möglich. Weitere Erkenntnisse werden von einzelmolekülspektroskopischen Untersuchungen erwartet. Voraussetzung hierfür ist jedoch eine orientierte Immobilisierung des LHCII auf einer Glasoberfläche. Es gelang, den Komplex über eine auf molekularer Ebene eingeführte Aminosäuresequenz aus sechs Histidinen an die Nickelchelatgruppe einer auf Glas immobilisierten Meerrettich-Peroxidase zu binden. Einzelmolekülspektroskopisch konnte eine LHCII-Immobilisation senkrecht zur Proteinsymmetrieachse nachgewiesen werden. Mittelfristig wird angestrebt, LHCII-Farbstoffkonstrukte auch für photovoltaische Anwendungen nutzbar zu machen. Ein erster Meilenstein wurde in dieser Arbeit erreicht, indem es gelang, LHCII an Titandioxid, Halbleiter der sog. Grätzelzelle, zu binden.

Femtosecond dynamics of the forbidden carotenoid S1 state in light-harvesting complexes of purple bacteria observed after two-photon excitation

Time-resolved excited-state absorption intensities after direct two-photon excitation of the carotenoid S1 state are reported for light-harvesting complexes of purple bacteria. Direct excitation of the carotenoid S1 state enables the measurement of subsequent dynamics on a fs time scale without interference from higher excited states, such as the optically allowed S2 state or the recently discovered dark state situated between S1 and S2. The lifetimes of the carotenoid S1 states in the B800-B850 complex and B800-B820 complex of Rhodopseudomonas acidophila are 7 ± 0.5 ps and 6 ± 0.5 ps, respectively, and in the light-harvesting complex 2 of Rhodobacter sphaeroides ≈1.9 ± 0.5 ps. These results explain the differences in the carotenoid to bacteriochlorophyll energy transfer efficiency after S2 excitation. In Rps. acidophila the carotenoid S1 to bacteriochlorophyll energy transfer is found to be quite inefficient (φET1 <28%) whereas in Rb. sphaeroides this energy transfer is very efficient (φET1 ≈80%). The results are rationalized by calculations of the ensemble averaged time constants. We find that the Car S1 → B800 electronic energy transfer (EET) pathway (≈85%) dominates over Car S1 → B850 EET (≈15%) in Rb. sphaeroides, whereas in Rps. acidophila the Car S1 → B850 EET (≈60%) is more efficient than the Car S1 → B800 EET (≈40%). The individual electronic couplings for the Car S1 → BChl energy transfer are estimated to be approximately 5–26 cm−1. A major contribution to the difference between the energy transfer efficiencies can be explained by different Car S1 energy gaps in the two species.

Thorium-234, POC and PON fluxes during POLARSTERN cruise ANT-XXVIII/3, January-March 2012

Carbon fixation by phytoplankton plays a key role in the uptake of atmospheric CO2 in the Southern Ocean. Yet, it still remains unclear how efficiently the particulate organic carbon (POC) is exported and transferred from ocean surface waters to depth during phytoplankton blooms. In addition, little is known about the processes that control the flux attenuation within the upper twilight zone. Here, we present results of downward POC and particulate organic nitrogen fluxes during the decline of a vast diatom bloom in the Atlantic sector of the Southern Ocean in summer 2012. We used thorium-234 (234Th) as a particle tracer in combination with drifting sediment traps (ST). Their simultaneous use evidenced a sustained high export rate of 234Th at 100 m depth in the weeks prior to and during the sampling period. The entire study area, of approximately 8000 km**2, showed similar vertical export fluxes in spite of the heterogeneity in phytoplankton standing stocks and productivity, indicating a decoupling between production and export. The POC fluxes at 100 m were high, averaging 26 ± 15 mmol C/m**2/d, although the strength of the biological pump was generally low. Only <20% of the daily primary production reached 100 m, presumably due to an active recycling of carbon and nutrients. Pigment analyses indicated that direct sinking of diatoms likely caused the high POC transfer efficiencies (~60%) observed between 100 and 300 m, although faecal pellets and transport of POC linked to zooplankton vertical migration might have also contributed to downward fluxes.

The copper cladding of steel by the submerged arc welding method

The literature available on submerged arc welding of copper and copper alloys, submerged arc welding with strip electrodes, and related areas has been reviewed in depth. Copper cladding of mild steel substrates by deposition from strip electrodes using the submerged arc welding process has been successful. A wide range of parameters, and several fluxes have been investigated. The range of deposit compositions is 66.4% Cu to 95.7% Cu. The weld beads have been metallographically examined using optical and electron microscopy. Equating weld beads to a thermodynamical equivalent of iron has proven to be an accurate and simplified means of handling quantitative data for multicomponent welds. Empirical equations derived using theoretical considerations characterize the weld bead dimensions as functions of the welding parameters and hence composition. The melting rate for strip electrodes is dependent upon the current-voltage product. Weld nugget size is increased by increased thermal transfer efficiencies resulting from stirring which is current dependent. The presence of Fe2O3 in a flux has been demonstrated to diminish electrode melting rate and drastically increase penetration, making flux choice the prime consideration in cladding operations. A theoretical model for welding with strip electrodes and the submerged arc process is presented.

The mosaic of habitats of the Seine estuary: Insights from food-web modelling and network analysis

Ecological network analysis was applied in the Seine estuary ecosystem, northern France, integrating ecological data from the years 1996 to 2002. The Ecopath with Ecosim (EwE) approach was used to model the trophic flows in 6 spatial compartments leading to 6 distinct EwE models: the navigation channel and the two channel flanks in the estuary proper, and 3 marine habitats in the eastern Seine Bay. Each model included 12 consumer groups, 2 primary producers, and one detritus group. Ecological network analysis was performed, including a set of indices, keystoneness, and trophic spectrum analysis to describe the contribution of the 6 habitats to the Seine estuary ecosystem functioning. Results showed that the two habitats with a functioning most related to a stressed state were the northern and central navigation channels, where building works and constant maritime traffic are considered major anthropogenic stressors. The strong top-down control highlighted in the other 4 habitats was not present in the central channel, showing instead (i) a change in keystone roles in the ecosystem towards sediment-based, lower trophic levels, and (ii) a higher system omnivory. The southern channel evidenced the highest system activity (total system throughput), the higher trophic specialisation (low system omnivory), and the lowest indication of stress (low cycling and relative redundancy). Marine habitats showed higher fish biomass proportions and higher transfer efficiencies per trophic levels than the estuarine habitats, with a transition area between the two that presented intermediate ecosystem structure. The modelling of separate habitats permitted disclosing each one's response to the different pressures, based on their a priori knowledge. Network indices, although non-monotonously, responded to these differences and seem a promising operational tool to define the ecological status of transitional water ecosystems.

Trophic food web and ecosystem attributes of a water reservoir of the Ria Formosa (south Portugal)

Using a top-down modelling approach, a balanced trophic food web model of a water reservoir of the Ria Formosa lagoonal system was constructed. Few adjustments of input data were necessary to run the model since most of the parameters were estimated at the study site and the characteristics of the water reservoir allowed a high degree of control and precision in terms of sampling and data collection. Trophic levels of the 14 compartments included in the model varied between 1.0 for primary producers and detritus to 3.4 for carnivorous fish and the 14 groups were aggregated in a food chain with six trophic levels. The water reservoir has a detritus based food chain, with the majority of the biomass concentrated in the first two levels, the producers level and the herbivore/detritivore level (97.6%). The transfer efficiencies were low, and decreased with increasing level number, varying between 6.0 and 0.2%. The degree of "ecosystem maturity" was difficult to establish, but several parameters indicate that it could be high. The water reservoir studied, which has similar environmental and ecological characteristics as the Ria Formosa lagoon. is near its carrying capacity. (C) 2004, Elsevier B.V. All rights reserved.

Effect of secondary ligands' size on energy transfer and electroluminescent efficiencies for a series of europium(III) complexes, a density functional theory study

In this paper, a quantum chemistry method was used to investigate the effect of different sizes of substituted phenanthrolines on absorption, energy transfer, and the electroluminescent performance of a series of Eu(TTA)(3)L (L = [1,10] phenanthroline (Phen), Pyrazino[2,3-f][1,10]phenanthroline (PyPhen), 2-methylprrazino[2,3-f][1,10] phenanthroline(MPP), dipyrido[3,2-a:2',3'-c]phenazine(DPPz), 11-methyldipyrido[3,2-a:2',3'c]phenazine(MDPz), 11.12-dimethyldipyrido[3,2-a:2',3'-c]phenazine(DDPz), and benzo[i]dipyrido[3,2-a:2',3'-c]phenazine (BDPz)) complexes. Absorption spectra calculations show that different sizes of secondary ligands have different effects on transition characters, intensities, and absorption peak positions.

Multi-level knowledge transfer in software development outsourcing projects : the agency theory view

In recent years, software development outsourcing has become even more complex. Outsourcing partner have begun‘re- outsourcing’ components of their projects to other outsourcing companies to minimize cost and gain efficiencies, creating a multi-level hierarchy of outsourcing. This research in progress paper presents preliminary findings of a study designed to understand knowledge transfer effectiveness of multi-level software development outsourcing projects. We conceptualize the SD-outsourcing entities using the Agency Theory. This study conceptualizes, operationalises and validates the concept of Knowledge Transfer as a three-phase multidimensional formative index of 1) Domain knowledge, 2) Communication behaviors, and 3) Clarity of requirements. Data analysis identified substantial, significant differences between the Principal and the Agent on two of the three constructs. Using Agency Theory, supported by preliminary findings, the paper also provides prescriptive guidelines of reducing the friction between the Principal and the Agent in multi-level software outsourcing.

Isolation and Estimation of Cytokinins and Cytokinin-Containing Transfer RNAs from Cucumis

N6-({Delta}2-Isopentenyl) adenosine antibodies were used for the isolation of free cytokinins and cytokinin-containing tRNAs from parts of Cucumis sativus L. var. Guntur seedlings and for the estimation of cytokinins in them. Immobilized N6-({Delta}2-isopentenyl) adenosine antibodies retained tRNAs containing N6-({Delta}2-isopentenyl) adenosine and N6-(4-hydroxy-3-methylbut-2-enyl) adenosine with equal efficiencies. There were at least five cytokinins in the free form in cucumber seedlings. N6-(4-Hydroxy-3-methylbut-2-enyl) adenosine, N6-({Delta}2-isopentenyl) adenosine, and N6-({Delta}2-isopentenyl) adenine were present at least to the extent of 80, 23, and 9 nanograms, respectively, in the cotyledons and 40, 6, and 3 nanograms, respectively, in the decotyledonated seedlings per gram of tissue. Only two cytokinins were found in the tRNAs of cucumber cotyledons, namely N6-({Delta}2-isopentenyl) adenosine and N6-(4-hydroxy-3-methylbut-2-enyl) adenosine in amounts of 12 and 318 nanograms, respectively, per gram of tissue. Immunoaffinity chromatographic analysis of radiolabeled aminoacyl tRNAs from cucumber cotyledons showed that tRNAPhe and tRNATyr contained cytokinins whereas tRNAAla did not.

Spectrally Resolved Resonance Energy Transfer from ZnO:MgO Nanocrystals

Resonance energy transfer (RET) from the visible emission of core−shell ZnO:MgO nanocrystals to Nile Red chromophores, following band gap excitation in the UV, has been investigated for four different nanocrystal sizes. With use of steady state and time-resolved fluorescence spectroscopic measurements the wavelength dependent RET efficiencies have been determined. The RET process in ZnO:MgO nanocrystals occurs from emissions involving trap state recombination. There are two such processes with different RET efficiencies for the same particle size. This is shown to be a consequence of the fact that the recombination processes giving rise to the two emissions are located at different distances from the center of the particle so that the donor−acceptor distances for the two are different, even for the same particle size.

Radiative efficiencies and global warming potentials using theoretically determined absorption cross-sections for several hydrofluoroethers (HFEs) and hydrofluoropolyethers (HFPEs)

Integrated infrared cross-sections and wavenumber positions for the vibrational modes of a range of hydrofluoroethers (HFEs) and hydrofluoropolyethers (HFPEs) have been calculated. Spectra were determined using a density functional method with an empirically derived correction for the wavenumbers of band positions. Radiative efficiencies (REs) were determined using the Pinnock et al. method and were used with atmospheric lifetimes from the literature to determine global warming potentials (GWPs). For the HFEs and the majority of the molecules in the HG series HFPEs, theoretically determined absorption cross-sections and REs lie within ca. 10% of those determined using measured spectra. For the larger molecules in the HG series and the HG′ series of HFPEs, agreement is less good, with theoretical values for the integrated cross-sections being up to 35% higher than the experimental values; REs are up to 45% higher. Our method gives better results than previous theoretical approaches, because of the level of theory chosen and, for REs, because an empirical wavenumber correction derived for perfluorocarbons is effective in predicting the positions of C–F stretching frequencies at around 1250 cm−1 for the molecules considered here.

Investigation of high-efficiency Wireless Power Transfer criteria of resonantly-coupled loops and dipoles through analysis of the figure of merit

The efficiency of a Wireless Power Transfer (WPT) system is greatly dependent on both the geometry and operating frequency of the transmitting and receiving structures. By using Coupled Mode Theory (CMT), the figure of merit is calculated for resonantly-coupled loop and dipole systems. An in-depth analysis of the figure of merit is performed with respect to the key geometric parameters of the loops and dipoles, along with the resonant frequency, in order to identify the key relationships leading to high-efficiency WPT. For systems consisting of two identical single-turn loops, it is shown that the choice of both the loop radius and resonant frequency are essential in achieving high-efficiency WPT. For the dipole geometries studied, it is shown that the choice of length is largely irrelevant and that as a result of their capacitive nature, low-MHz frequency dipoles are able to produce significantly higher figures of merit than those of the loops considered. The results of the figure of merit analysis are used to propose and subsequently compare two mid-range loop and dipole WPT systems of equal size and operating frequency, where it is shown that the dipole system is able to achieve higher efficiencies than the loop system of the distance range examined.