Avaliação de propriedades de artefatos à base de borracha natural

A combinação de excelentes propriedades mecânicas aliadas à biocompatibilidade torna a borracha natural um material amplamente empregado na fabricação de artefatos voltados à saúde, tais como bicos de chupetas e de mamadeiras, e luvas cirúrgicas e de procedimentos não-cirúrgicos. Esses artefatos são processados a partir de látices de poli(cis-isopreno) extraído de seringueiras. Entretanto, o grande número de insaturações presentes na cadeia polimérica, mesmo após a vulcanização, resulta em uma baixa resistência desse material ao envelhecimento, causado principalmente pela associação de fatores como temperatura, oxigênio, ozônio e radiação. Outro inconveniente associado à aplicação da borracha natural é a presença de proteínas no látex, com potencial alergênico, podendo promover reações fisiológicas em alguns usuários. Por esse motivo artefatos comerciais à base de material sintético também são encontrados no mercado. Esses artefatos também não são isentos dos processos naturais de desgaste e decomposição. Esta Dissertação teve como objetivo realizar um estudo comparativo de propriedades dos produtos comerciais à base de borracha natural e à base de material sintético (bicos de chupeta e de mamadeiras e luvas) de diferentes fabricantes, como adquiridos e após sofrerem envelhecimento acelerado. O estudo foi feito empregando-se as técnicas de espectroscopia na região do infravermelho com transformada de Fourier (FTIR) e termogravimetria (TG). Uma avaliação mecânica com métodos padronizados foi também realizada

Copolímeros à base de estireno e anidrido maleico: caracterização e estudo viscosimétrico

Copolímeros à base de estireno e anidrido maleico (SMA) são materiais sintéticos comercialmente disponíveis, obtidos pela reação dos dois monômeros citados em diferentes proporções, resultando em materiais versáteis, e disponíveis em diferentes graus de massas e porcentagens molares de anidrido maleico. São considerados polímeros funcionais devido à reatividade do grupamento anidrido maleico presente na cadeia polimérica. Por este motivo, esses materiais possuem vasta gama de aplicações, e elevada importância em diversas áreas, principalmente por terem baixa toxicidade, boa resistência térmica e boa estabilidade dimensional. Dessa forma, para melhor aplicação desses copolímeros, é muito importante o conhecimento dos parâmetros relativos ao seu comportamento em solução. A viscosimetria, em especial, é um método simples, útil e apropriado para fornecer essas informações. Os parâmetros viscosimétricos podem ser matematicamente calculados por extrapolação gráfica, entretanto a geração dos dados experimentais é mais demorada. Em contrapartida, é possível que a determinação experimental seja feita de forma mais rápida, por um único ponto, procedimento esse que desperta tanto o interesse acadêmico quanto o industrial. Neste trabalho, foram empregados os dois métodos de cálculo, utilizando solventes puros, misturas de solventes e três amostras de copolímeros à base de SMA. As determinações foram conduzidas a 40C. Os copolímeros utilizados possuiam teores de anidrido maleico de 50%, 45% e 40%, sendo os dois últimos esterificados com butil-metil-éster e sec-butil-metil-éster, respectivamente. Os solventes utilizados foram: N-metil-pirrolidona (NMP), tetrahidrofurano (THF) e suas respectivas misturas 1:1 com metil-etil-cetona (MEK), ou seja, (NMP:MEK) e THF:MEK, sendo a MEK um não solvente para o copolímero não esterificado. As equações utilizadas para extrapolação gráfica foram as de Huggins, Kraemer e Schulz-Blaschke. As equações empregadas em um único ponto foram as de Solomon-Ciuta, Deb-Chanterjee e novamente Schulz-Blaschke. Os resultados obtidos foram comparados e avaliou-se a possibilidade da utilização do método mais rápido, por um único ponto, para os sistemas estudados através dos desvios percentuais tendo como padrão os resultados da equação de Huggins. A equação de Deb-Chanterjee foi a mais adequada aos sistemas em NMP, que foi também o melhor solvente para as amostras. Os resultados obtidos na mistura NMP:MEK sugeriram que a viscosimetria pode ter sido um método sensível às pequenas diferenças estruturais entre os grupos pendentes nas amostras esterificadas. Paralelamente, realizou-se análises de espectroscopia na região do infravermelho (FTIR), análise termogravimétrica (TGA) e ensaios dinâmico-mecânicos (DMA) para a caracterização estrutural e térmica das amostras. Somente os resultados obtidos a partir de DMA indicaram diferenças entre as amostras esterificadas

MDNR-NOAA trawl standardization study

Long-term living resource monitoring programs are commonly conducted globally to evaluate trends and impacts of environmental change and management actions. For example, the Woods Hole bottom trawl survey has been conducted since 1963 providing critical information on the biology and distribution of finfish and shellfish in the North Atlantic (Despres-Patango et al. 1988). Similarly in the Chesapeake Bay, the Maryland Department of Natural Resources (MDNR) Summer Blue Crab Trawl survey has been conducted continuously since 1977 providing management-relevant information on the abundance of this important commercial and recreational species. A key component of monitoring program design is standardization of methods over time to allow for a continuous, unbiased data set. However, complete standardization is not always possible where multiple vessels, captains, and crews are required to cover large geographic areas (Tyson et al. 2006). Of equal issue is technological advancement of gear which serves to increase capture efficiency or ease of use. Thus, to maintain consistency and facilitate interpretation of reported data in long-term datasets, it is imperative to understand and quantify the impacts of changes in gear and vessels on catch per unit of effort (CPUE). While vessel changes are inevitable due to ageing fleets and other factors, gear changes often reflect a decision to exploit technological advances. A prime example of this is the otter trawl, a common tool for fisheries monitoring and research worldwide. Historically, trawl nets were constructed of natural materials such as cotton and linen. However modern net construction consists of synthetic materials such as polyamide, polyester, polyethylene, and polypropylene (Nielson et. al. 1983). Over the past several decades, polyamide materials which will be referred to as nylon, has been a standard material used in otter trawl construction. These trawls are typically dipped into a latex coating for increased abrasion resistance, a process that is referred to as “green dipped.” More recently, polyethylene netting has become popular among living resource monitoring agencies. Polyethylene netting, commonly known as sapphire netting, consists of braided filaments that form a very durable material more resistant to abrasion than nylon. Additionally, sapphire netting allows for stronger knot strength during construction of the net further increasing the net’s durability and longevity. Also, sapphire absorbs less water with a specific gravity near 0.91 allowing the material to float as compared to nylon with specific gravity of 1.14 (Nielson et. al. 1983). This same property results in a light weight net which is more efficient in deployment, retrieval and fishing of the net, particularly when towing from small vessels. While there are many advantages to the sapphire netting, no comparative efficiency data is available for these two trawl net types. Traditional nylon netting has been used consistently for decades by the MDDNR to generate long term living resource data sets of great value. However, there is much interest in switching to the advanced materials. In addition, recent collaborative efforts between MDNR and NOAA’s Cooperative Oxford Laboratory (NOAA-COL) require using different vessels for trawling in support of joint projects. In order to continue collaborative programs, or change to more innovative netting materials, the influence of these changes must be demonstrated to be negligible or correction factors determined. Thus, the objective of this study was to examine the influence of trawl net type, vessel type, and their interaction on capture efficiency.

Reversible tuning of the wettability of carbon nanotube arrays: the effect of ultraviolet/ozone and vacuum pyrolysis treatments.

Among diverse types of synthetic materials, arrays of vertically aligned carbon nanotubes have attracted the most attention, mainly because of their exceptional mechanical, electrical, optical, and thermal properties. However, their wetting properties are yet to be understood. In this present study, oxygenated surface functional groups have been identified as a vital factor in controlling the wetting properties of carbon nanotube arrays. The results presented herein indeed show that a combination of ultraviolet/ozone and vacuum pyrolysis treatments can be used to vary the surface concentration of these functional groups such that the carbon nanotube array can be repeatedly switched between hydrophilic and hydrophobic.

Double twist in helical polymer "soft" crystals

In natural and synthetic materials having non-racemic chiral centers, chirality and structural ordering each play a distinct role in the formation of ordered states. Configurational chirality can be extended to morphological chirality when the phase, structures possess low liquid crystalline order. In the crystalline states the crystallization process suppresses the chiral helical morphology due to strong ordering interactions, In this Letter, we report the first observation of helical single lamellar crystals of synthetic non-racemic chiral polymers. Experimental evidence shows that the molecular chains twist along both the long and short axes of the helical lamellar crystals, which is the first time a double-twist molecular orientation in a helical crystal has been observed.

Biomonitoring of air pollutants by using lichens (Evernia prunastri) in areas between Kenitra and Mohammedia cities in Morocco.

In this study, Evernia prunastri, a lichen growing in its natural habitat in Morocco was analysed for the concentration of five heavy metals (Fe, Pb, Zn, Cu and Cr) from eleven sites between Kenitra and Mohammedia cities. The control site was Dar Essalam, an isolated area with low traffic density and dense vegetation. In the investigated areas, the concentration of heavy metals was correlated with vehicular traffic, industrial activity and urbanization. The total metal concentration was highest in Sidi Yahya, followed by Mohammedia and Bouznika. The coefficient of variation was higher for Pb and lower for Cu, Zn and Fe. The concentrations of most heavy metals in the thalli differed significantly between sites (p<0.01). Principal component analysis (PCA) revealed a significant correlation between heavy metal accumulation and atmospheric purity index. This study demonstrated also that the factors most strongly affecting the lichen flora were traffic density, the petroleum industry and paper factories in these areas. Overall, these results suggest that the index of atmospheric purity and assessment of heavy metals in lichen thalli are good indicators of the air quality at the studied sites.

The effect of simvastatin on bone formation and ceramic resorption in a peri-implant defect model

Experimental use of statins as stimulators of bone formation suggests they may have widespread applicability in the field of orthopaedics. With their combined effects on osteoblasts and osteoclasts, statins have the potential to enhance resorption of synthetic materials and improve bone ingrowth. In this study, the effect of oral and local administration of simvastatin to a 0 tricalcium phosphate (beta TCP)-filled defect around an implant was compared with recombinant human bone morphogenetic protein 2 (rhBMP2). On hundred and sixty-two Sprague-Dawley rats were assigned to treatment groups: local application of 0.1, 0.9 or 1.7 mg of simvastatin, oral simvastatin at 5, 10 or 50 mg kg(-1) day(-1) for 20 days, local delivery of I or 10 mu g of rhBMP2, or control. At 6 weeks rhBMP2 increased serum tartrate-resistant acid phosphatase 5b levels and reduced PTCP area fraction, particle size and number compared with control, suggesting increased osteoclast activity. There was reduced stiffness and increased mechanical strength with this treatment. Local simvastatin resulted in a decreased mineral apposition rate at 6 weeks and increased fibrous area fraction, PTCP area fraction, particle size and number at 26 weeks. Oral simvastatin had no effect compared with control. Local application of rhBMP2 increased resorption and improved mechanical strength whereas simvastatin was detrimental to healing. Oral simvastatin was ineffective at promoting either ceramic resorption or bone formation. The effect of statins on the repair of bone defects with graft substitute materials is influenced by its bioavailability. Thus, further studies on the optimal delivery system are needed. (C) 2007 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Synthesis of the putative structures of homopumiliotoxins 235C and 233F

A novel approach to diene based quinolizidines, using an intramolecular Heck reaction in which the vinyl bromide double bond undergoes inversion of configuration, is reported. These quinolizidines have previously been proposed as tentative structures for homopumiliotoxin alkaloids 233F and 235C. The mass spectral data of the synthetic materials were different to those of the natural products confirming that the original structures need to be revised. (C) 2004 Elsevier Ltd. All rights reserved.

Twenty years since ‘antibody mimics’ by molecular imprinting were first proposed: A critical perspective

In February 1993, the group of Klaus Mosbach published their milestone study in Nature where, for the first time, non-covalent molecular imprints were employed in a competitive binding assay. In this seminal piece of work, and also for the first time, they refer to molecularly imprinted polymers as being ‘antibody mimics’ and hypothesised that these synthetic materials could one day provide ‘a useful, general alternative to antibodies’. This perspective article examines how far we have come in the 20 years since this publication in terms of realising this hypothesis and poses the question of whether we actually need molecularly imprinted polymers to be a general alternative to antibodies.

Synthesis of molecular biomimetics

Biomimetics has paved the way toward new materials and technologies inspired in Nature. Biomolecules and their supramolecular organization have today a leading role in biomimetics, benefiting from the recent advances in nanotechnology. The production of biomimetic materials may be however a difficult task, because Nature does it very well. The use of several building blocks assembled in bottom-up arrangement is without doubt at the core of this process. Such building blocks include different molecules or molecular arrangements, of synthetic or natural origin, such as amino acids, lipids, carbohydrates, nucleic acids, carbon allotropes, dendrimers, or organosilanes, among others. The most common approaches to produce synthetic biomimetic materials are reported herein, with special emphasis to building blocks and their supramolecular arrangement.

Plan de negocios Muy Mirona

Evidenciamos las necesidades de la mujer bogotana, más exactamente la falta de diseño y exclusividad en el calzado de las mujeres. Por ello en julio de 2010 se crea la empresa Muy Mirona. Una empresa conformada por dos estudiantes de (21) años, siendo una socia estudiante de la Universidad del Rosario y la otra estudiante de la Salle College, quienes tienen el objetivo de posicionar la organización como una de las mejores empresas en innovación de calzado y así fomentar el empleo de personas mayores de 40 años para generar un impacto social positivo en la sociedad capitalina. Después de días y con miles de ideas surgió el nombre de nuestra empresa “Muy Mirona” como una forma divertida e interesante de captar a nuestras clientas que tienen como objetivo ser diferentes y únicas. Al día de hoy hemos tenido el gusto de lanzar tres colecciones la primer Nice Too Meet You, en donde se hizo énfasis en la comodidad, los zapatos que diseñamos para esta colección fueron planos, utilizamos materiales sintéticos que se caracterizaban por la variedad de sus colores. La segunda colección Nice Too Meet You Two, se diferencio de la primera debido a la incursión que tuvimos en materiales tales como el cuero, taches, gamuzas, e introdujimos una nueva línea de tacón pequeño es decir tacón 4/5 que fue todo un éxito. Finalmente en la tercera colección Madonna Bastarda decidimos ir mas allá, entrando en el tacón high es decir tacón de 12 centímetros con plataformas livianas para el manejo funcional de nuestras clientas, en esta colección variamos el portafolio no solo de los modelos sino también de los materiales y de los diseños, sin abandonar nuestra adorada línea de zapatos planos ya que también sacamos referencias de este tipo de zapato en la última colección. A lo largo de nuestra vida activa como empresa, hemos tenido la oportunidad de participar activamente en eventos como la feria de la universidad del rosario y la semana internacional de la moda de Bogotá, la feria de jóvenes empresarios ,en donde hemos contado con la acogida de gran cantidad de público, consolidándonos como una de las pocas empresas de diseño exclusivo de calzado para dama, ratificando nuestro compromiso con un trabajo de calidad y con una visión hacia el futuro. A lo largo de este tiempo hemos vivido experiencias invaluables que nos hacen ser lo que somos hoy en día, buscamos estar preparadas para los retos venideros reinventándonos en cada una de nuestras colecciones. Permitiendo que Muy Mirona sea reconocida a nivel nacional e internacional como una empresa que entiende los deseos y las necesidades de las mujeres y que logra convertir esto en comodidad y funcionalidad, deseamos dirigirnos a todas las mujeres modernas, amantes de la moda, dispuestas a portar unos hermosos zapatos de fina coquetería cargados de estilo, sin llegar a lo soso y a lo extravagante.

PEG−peptide conjugates

The remarkable diversity of the self-assembly behavior of PEG−peptides is reviewed, including self-assemblies formed by PEG−peptides with β-sheet and α-helical (coiled-coil) peptide sequences. The modes of self-assembly in solution and in the solid state are discussed. Additionally, applications in bionanotechnology and synthetic materials science are summarized.

Grafts in myringoplasty : utilizing a silk fibroin scaffold as a novel device

Chronic perforations of the eardrum or tympanic membrane represent a significant source of morbidity worldwide. Myringoplasty is the operative repair of a perforated tympanic membrane and is a procedure commonly performed by otolaryngologists. Its purpose is to close the tympanic membrane, improve hearing and limit patient susceptibility to middle ear infections. The success rates of the different surgical techniques used to perform a myringoplasty, and the optimal graft materials to achieve complete closure and restore hearing, vary significantly in the literature. A number of autologous tissues, homografts and synthetic materials are described as graft options. With the advent and development of tissue engineering in the last decade, a number of biomaterials have been studied and attempts have been made to mimic biological functions with these materials. Fibroin, a core structural protein in silk from silkworms, has been widely studied with biomedical applications in mind. Several cell types, including keratinocytes, have grown on silk biomaterials, and scaffolds manufactured from silk have successfully been used in wound healing and for tissue engineering purposes. This review focuses on the current available grafts for myringoplasty and their limitations, and examines the biomechanical properties of silk, assessing the potential benefits of a silk fibroin scaffold as a novel device for use as a graft in myringoplasty surgery.

Aproveitamento da fibra do epicarpo do coco babaçu em compósito com matriz epóxi: estudo do efeito do tratamento da fibra

Nowadays the environmental issues are increasingly highlighted since the future of humanity is dependent on the actions taken by man. Major efforts are being expended in pursuit of knowledge and alternatives to promote sustainable development without compromising the environment. In recent years there has been a marked growth in the development of reinforced composite fiber plants, as an alternative for economic and ecological effects, especially in the substitution of synthetic materials such as reinforcement material in composites. In this current study the chemical- physical or (thermophysics )characteristics of the babassu coconut fiber, derived from the epicarp of the fruit (Orbignyda Phalerata), which the main constituents of the fiber: Klason lignin, insoluble, cellulose, holocellulose, hemicellulose and the content of ash and moisture will be determined. A study was conducted about the superficial modification of the fibers of the epicarp babassu coconut under the influence of chemical treatment by alkalinization, in an aqueous solution of NaOH to 2.5% (m/v) and to 5.0% to improve the compatibility matrix / reinforcement composite with epoxy matrix. The results of the changes occurred in staple fibers through the use of the techniques of thermogravimetric analyses (TG) and differential scanning calorimetry (DSC). The results found on thermal analysis on samples of fiber without chemical treatment (alkalinities), and on fiber samples treated by alkalinization show that the proposed chemical treatment increases the thermal stability of the fibers and provides a growth of the surface of area fibers, parameters that enhance adhesion fiber / composite. The findings were evaluated and compared with published results from other vegetable fibers, showing that the use of babassu coconut fibers has technical and economic potential for its use as reinforcement in composites

Sorção de petróleo por fibras vegetais

Nowadays, when accidents with oil tanker or shore tanks occur and there is oil spill, some arrangements are made in order to repress and to fix the situation. For the containment, barriers or detours are usually made of synthetic materials such as polyurethane foam. In order to clear water away, techniques like in loco burning, biodegradant agents, dispersant agents and sorbent materials application are used. The most of the sorbent materials are also synthetic and they are used because it is easy to store them and their availability in market. This dissertation introduces the study of vegetable fibers of pineapple leaf fibers (Ananas comosus (L.) Merr.), cotton fibers (Gossypium herbaceum L.), kapok fibers (Ceiba pentandra (L.) Gaertn.), curauá fibers (Ananas erectifolius L.B. Sm.) and sisal fibers (Agave sisalana Perrine) related to their capacity of sorption of oil in case of accidental spill in the ocean. This work evaluates the substitution possibility of synthetic materials by natural biodegradable materials with less cost