Interaction between tsunami waves and isolated conical Islands

A newly developed computer model, which solves the horizontal two-dimensional Boussinesq equations using a total variation diminishing Lax-Wendroff scheme, has been used to study the runup of solitary waves, with various heights, on idealized conical islands consisting of side slopes of different angles. This numerical model has first been validated against high-quality laboratory measurements of solitary wave runups on a uniform plane slope and on an isoliated conical island, with satisfactory agreement being achieved. An extensive parametric study concerning the effects of the wave height and island slope on the solitary wave runup has subsequently been carried out. Strong wave shoaling and diffraction effects have been observed for all the cases investigated. The relationship between the runup height and wave height has been obtained and compared with that for the case on uniform plane slopes. It has been found that the runup on a conical island is generally lower than that on a uniform plane slope, as a result of the two-dimensional effect. The correlation between the runup with the side slope of an island has also been identified, with higher runups on milder slopes. This comprehensive study on the soliton runup on islands is relevant to the protection of coastal and inland regions from extreme wave attacks. © the Coastal Education & Research Foundation 2012.

The pursuit of academic excellence and business engagement: Is it irreconcilable?

Universities currently need to satisfy the demands of different audiences. In light of the increasing policy emphasis on "third mission" activities, universities are attempting to incorporate these into their traditional missions of teaching and research. University strategies to accomplishing its traditional missions are well-honed and routinized, but the incorporation of the third mission is posing important strategic and managerial challenges for universities. This study explores the relationship between university-business collaborations and academic excellence in order to examine the extent to which academic institutions can balance these objectives. Based on data from the UK Research Assessment Exercise 2001 at the level of the university department, we find no systematic positive or negative relationship between scientific excellence and engagement with industry. Across the disciplinary fields reported in the 2001 Research Assessment Exercise (i. e. engineering, hard sciences, biomedicine, social sciences and the humanities) the relationship between academic excellence and engagement with business is largely contingent on the institutional context of the university department. This paper adds to the growing body of literature on university engagement with business by examining this activity for the social sciences and the humanities. Our findings have important implications for the strategic management of university departments and for higher education policy related to measuring the performance of higher education research institutions. © 2013 Akadémiai Kiadó, Budapest, Hungary.

MgO expansive cement and concrete in China: Past, present and future

Uniquely, China employs MgO already contained in cement clinker or as an expansive additive to compensate for the thermal shrinkage of mass concrete, particularly dam concrete, with almost 40 years' experience in both research activities and industrial applications. Compensating shrinkage with expansion produced by MgO has been proved to effectively prevent thermal cracking of mass concrete, and reduce the cost of temperature control measures and speed up the construction process. Moreover, the expansion properties of MgO could be designed flexibly, through adjusting its microstructure by changing the calcination conditions (calcining temperature and residence time). The collective knowledge and experience of MgO expansive cement and concrete is worthy of sharing with relevant engineers and researchers globally but dissemination has been hindered as most of the relevant literature is published in Chinese. This paper reviews the history, state-of-the-art progress and future research needs in the field of MgO expansive cement and concrete. © 2013 Elsevier Ltd.

Multispacecraft refueling optimization considering the J2 perturbation and window constraints

The optimization of a near-circular low-Earth-orbit multispacecraft refueling problem is studied. The refueling sequence, service time, and orbital transfer time are used as design variables, whereas the mean mission completion time and mean propellant consumed by orbital maneuvers are used as design objectives. The J2 term of the Earth's nonspherical gravity perturbation and the constraints of rendezvous time windows are taken into account. A hybridencoding genetic algorithm, which uses normal fitness assignment to find the minimum mean propellant-cost solution and fitness assignment based on the concept of Pareto-optimality to find multi-objective optimal solutions, is presented. The proposed approach is demonstrated for a typical multispacecraft refueling problem. The results show that the proposed approach is effective, and that the J2 perturbation and the time-window constraints have considerable influences on the optimization results. For the problems in which the J2 perturbation is not accounted for, the optimal refueling order can be simply determined as a sequential order or as the order only based on orbitalplane differences. In contrast, for the problems that do consider the J2 perturbation, the optimal solutions obtained have a variety of refueling orders and use the drift of nodes effectively to reduce the propellant cost for eliminating orbital-plane differences. © 2013 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.

Theoretical study on analytical potential function and spectroscopic parameters for CaF molecule

The equilibrium properties and potential energy curves of the ground electronic state of CaF have been calculated using the Brueckner Doubles calculation with a triples contribution added [BD(T)] and the gradient-corrected density functional theory with three-parameter exact exchange mixing (B3LY-P) method, with 6-311 + G*,6-311 + G(2df,2pd) and 6-311 + G(3df,3pd) basis sets. All the computational PECs are fitted to analytical potential energy functions using Murrell-Sorbie, Huxley and Tang-Toennies potentials. Based on this, the spectroscopic parameters are calculated, and then compared with some other theoretical and experimental data. (C) 2004 Elsevier B.V. All rights reserved.

塔里木盆地历史时期的自然环境演变

Exploit Tarim Basin Historical Physical Geographic Information System by linking historical documents and Geographic Information System, reconstruct the physical environmental evolution in Tarirn Basin during historical period (the last 2 Ka), special discuss riverhead of the Yellow River and Lop Nur. Based on analyzing Chinese historical documents (antiquity maps and texts), extract physical environmental information in Xiyu during historical period from Twenty-Five History and geographic books and records past dynasties, divide it into 4 period of time. Regarding digital topographical maps as base maps and looking on water bodies, vegetation and desert as central factors, quantify historical physical geographic data in Geographic Information System in terms of dynastic combination of Xianqin-Han, Jin-Wei-Nanbeichao, Tang-Wudai and Song-Yuan-Ming-Qing, execute physical environmental maps of Xiyu through the ages, in order to image the changes of water system, oasis and desert in Xiyu during the last 2 Ka. Compare cross orientation the relation of environmental factors all historical period of time from the influence of climate to oasis and desert, deem that climate condition decided ecological structure in direct and restrict the extent of desertification, especially climate corresponded the style of oasis and the spread of desert in the period of Jin-Wei-Nanbeichao and Tang-Wudai. Compare portrait direction the physical environmental characters in Xiyu during different period of time from 5 aspects of water bodies, oasis, desert, products and climate, deem that physical environment in Xiyu changed in all aspects during historical period. The origin of Lysenkoism about the Yellow River Undercurrent is agelong, whose ascending and descending at times due to investigating the riverhead of the Yellow River time after time during historical period and researching and disputing about the geographic location of Jishishan Mountain. It could consider the faultage in northeastern Qinghai-Xizang Plateau as the channels of undercurrent according to the research of modern geoscience field in the riverhead region.

Model-based life cycle cost and assessment tool for sustainable building design decision

There is a growing concern in reducing greenhouse gas emissions all over the world. The U.K. has set 34% target reduction of emission before 2020 and 80% before 2050 compared to 1990 recently in Post Copenhagen Report on Climate Change. In practise, Life Cycle Cost (LCC) and Life Cycle Assessment (LCA) tools have been introduced to construction industry in order to achieve this such as. However, there is clear a disconnection between costs and environmental impacts over the life cycle of a built asset when using these two tools. Besides, the changes in Information and Communication Technologies (ICTs) lead to a change in the way information is represented, in particular, information is being fed more easily and distributed more quickly to different stakeholders by the use of tool such as the Building Information Modelling (BIM), with little consideration on incorporating LCC and LCA and their maximised usage within the BIM environment. The aim of this paper is to propose the development of a model-based LCC and LCA tool in order to provide sustainable building design decisions for clients, architects and quantity surveyors, by then an optimal investment decision can be made by studying the trade-off between costs and environmental impacts. An application framework is also proposed finally as the future work that shows how the proposed model can be incorporated into the BIM environment in practise.

Methodology To model the energy and greenhouse gas emissions of electronic software distributions

A new electronic software distribution (ESD) life cycle analysis (LCA)methodology and model structure were constructed to calculate energy consumption and greenhouse gas (GHG) emissions. In order to counteract the use of high level, top-down modeling efforts, and to increase result accuracy, a focus upon device details and data routes was taken. In order to compare ESD to a relevant physical distribution alternative,physical model boundaries and variables were described. The methodology was compiled from the analysis and operational data of a major online store which provides ESD and physical distribution options. The ESD method included the calculation of power consumption of data center server and networking devices. An in-depth method to calculate server efficiency and utilization was also included to account for virtualization and server efficiency features. Internet transfer power consumption was analyzed taking into account the number of data hops and networking devices used. The power consumed by online browsing and downloading was also factored into the model. The embedded CO2e of server and networking devices was proportioned to each ESD process. Three U.K.-based ESD scenarios were analyzed using the model which revealed potential CO2e savings of 83% when ESD was used over physical distribution. Results also highlighted the importance of server efficiency and utilization methods.