Experimental study of load bearing cold-formed steel wall systems under fire conditions

Light Gauge Steel Framing (LSF) walls made of cold-formed and thin-walled steel lipped channel studs with plasterboard linings on both sides are commonly used in commercial, industrial and residential buildings. However, there is limited data about their structural and thermal performance under fire conditions while past research showed contradicting results about the benefits of using cavity insulation. A new composite wall panel was recently proposed to improve the fire resistance rating of LSF walls, where an insulation layer was used externally between the plasterboards on both sides of the wall frame instead of using it in the cavity. In this research 11 full scale tests were conducted on conventional load bearing steel stud walls with and without cavity insulation, and the new composite panel system to study their thermal and structural performance under standard fire conditions. These tests showed that the use of cavity insulation led to inferior fire performance of walls, and provided supporting research data. They demonstrated that the use of insulation externally in a composite panel enhanced the thermal and structural performance of LSF walls and increased their fire resistance rating. This paper presents the details of the LSF wall tests and the thermal and structural performance data and fire resistance rating of load-bearing wall assemblies lined with varying plasterboard-insulation configurations under two different load ratios. Fire test results including the time–temperature and deflection profiles are presented along with the failure times and modes.

Finite element modelling of load bearing cold-formed steel wall systems under fire conditions

Light Gauge Steel Framing (LSF) walls are made of cold-formed, thin-walled steel lipped channel studs with plasterboard linings on both sides. However, these thin-walled steel sections heat up quickly and lose their strength under fire conditions despite the protection provided by plasterboards. A new composite wall panel was recently proposed to improve the fire resistance rating of LSF walls, where an insulation layer was used externally between the plasterboards on both sides of the wall frame instead of using it in the cavity. A research study using both fire tests and numerical studies was undertaken to investigate the structural and thermal behaviour of load bearing LSF walls made of both conventional and the new composite panels under standard fire conditions and to determine their fire resistance rating. This paper presents the details of finite element models of LSF wall studs developed to simulate the structural performance of LSF wall panels under standard fire conditions. Finite element analyses were conducted under both steady and transient state conditions using the time-temperature profiles measured during the fire tests. The developed models were validated using the fire test results of 11 LSF wall panels with various plasterboard/insulation configurations and load ratios. They were able to predict the fire resistance rating within five minutes. The use of accurate numerical models allowed the inclusion of various complex structural and thermal effects such as local buckling, thermal bowing and neutral axis shift that occurred in thin-walled steel studs under non-uniform elevated temperature conditions. Finite element analyses also demonstrated the improvements offered by the new composite panel system over the conventional cavity insulated system.

Studies on the seismic design of low-rise steel buildings /

Mode of access: Internet.

Erecting structural steel.

Mode of access: Internet.

Fire performance of LSF wall panels using numerical parametric studies

Light Gauge Steel Framing (LSF) walls made of cold-formed and thin-walled steel lipped channel studs with plasterboard linings on both sides are commonly used in commercial, industrial and residential buildings. However, there is limited data about their structural and thermal performances under fire conditions. Recent research at the Queensland University of Technology has investigated the structural and thermal behaviour of load bearing LSF wall systems. In this research a series of full scale fire tests was conducted first to evaluate the performance of LSF wall systems with eight different wall configurations under standard fire conditions. Finite element models of LSF walls were then developed, analysed under transient and steady state conditions, and validated using full scale fire tests. This paper presents the details of an investigation into the fire performance of LSF wall panels based on an extensive finite element analysis based parametric study. The LSF wall panels with eight different plasterboard-insulation configurations were considered under standard fire conditions. Effects of varying steel grades, steel thicknesses, screw spacing, plasterboard restraint, insulation materials and load ratio on the fire performance of LSF walls were investigated and the results of extensive fire performance data are presented in the form of load ratio versus time and critical hot flange (failure) temperature curves.

Coordenação e fiscalização de obras de reabilitação urbana - acompanhamento de operações de reabilitação no Morro da Sé

O presente relatório descreve o trabalho desenvolvido durante os 6 meses de estágio curricular no âmbito do mestrado em construções. O estágio decorreu na Porto Vivo, SRU, uma empresa pública responsável pela dinamização social e económica do Centro Histórico do Porto – Património Mundial. Ao longo do estágio foram realizadas tarefas relacionadas com o tema Coordenação e Fiscalização de Obras, integrando a equipa do Núcleo de Execução de Obras (NEO), acompanhando as obras a decorrer no Centro Histórico do Porto, como por exemplo as Operações de Reabilitação e Realojamento no Morro da Sé. Procedeu-se também à realização de várias vistorias (segurança, salubridade e estética, determinação do nível de conservação e vistorias para efeitos de receção provisória de edifícios), embargo de obras e também o estudo do estado de conservação do edificado nas Áreas de Reabilitação Urbana (ARU) em Santos Pousada e Lapa. Desta forma, tornou-se possível reunir uma diversa quantidade de informação para a realização deste relatório, abordando assuntos importantes tais como as adversidades e anomalias observadas nas visitas às Operações de Reabilitação e Realojamento no Morro da Sé, como também a sugestão de um material estrutural alternativo, o Light Steel Framing.

Solução construtiva com elementos de aço enformados a frio

A atual dissertação consiste numa apreciação global dos vários critérios que integram a aplicação do método construtivo de elementos estruturais de aço enformado a frio, muitas vezes designado por método prescritivo da construção em “aço leve”, “Light Steel Framing” (LSF) ou em alternativa também designado de “Light Gauge Steel Framing” (LGSF) e está especialmente vocacionado para a construção de edifícios de um a três pisos. Este conceito tem origem no facto de se usar chapas de aço de espessura reduzida, respetivamente mais leve, para fabricação dos perfis o que contribui para um menor peso dos elementos estruturais. Será abordado essencialmente o sector dos edifícios de habitação bem como a reabilitação dos mesmos, com recurso à solução em estudo, dado que é um dos setores que detém maior impacte socio-económico e ambiental. O estudo engloba igualmente a descrição e análise dos métodos construtivos, bem como os produtos empregues nesta solução sustentável, definindo desta forma uma resposta ajustada a cada subsistema da construção, desde estrutura, pavimentos, coberturas, fachadas, divisórias, climatização e acústica. Por fim, para obter um retrato da prática na Região Autónoma da Madeira, face a este tipo de construção sustentável, realizou-se uma análise de casos de estudo, nomeadamente no que diz respeito à viabilidade económica desta solução construtiva.

Influence of cladding on robustness of multi-storey buildings

In this dissertation the influence of a precast concrete cladding system on structural robustness of a multi-storey steel-composite building is studied. The analysis follows the well-established framework developed at Imperial College London for the appraisal of robustness of multi-storey buildings. For this scope a simplified nonlinear model of a typical precast concrete façade-system is developed. Particular attention is given to the connection system between structural frame and panel, recognised as the driving component of the nonlinear behaviour of the façade-system. Only connections involved in the gravity load path are evaluated (bearing connections). Together with standard connection, a newly proposed system (Slotted Bearing Connection) is designed to achieve a more ductile behaviour of the panel-connection system. A parametric study involving the dimensions of panel-connection components is developed to search for an optimal configuration of the bearing connection. From the appraisal of structural robustness of the panelised frame it is found that the standard connection systems may reduce the robustness of a multi-storey frame due to a poor ductile behaviour while the newly proposed connection is able to guarantee an enhanced response to the panelised multi-storey frame thanks to a higher ductility.

Les constructions métalliques /

Mode of access: Internet.

Planning for seismic rehabilitation : societal issues /

"FEMA 275."

First [second, and final] report.

Mode of access: Internet.

Analysis of continous frames by graphical distribution of moments,

Mode of access: Internet.