The effect of environment on endosperm cell-wall development in Triticum aestivum during grain filling: an infrared spectroscopic imaging study

One of the major factors contributing to the failure of new wheat varieties is seasonal variability in end-use quality. Consequently, it is important to produce varieties which are robust and stable over a range of environmental conditions. Recently developed sample preparation methods have allowed the application of FT-IR spectroscopic imaging methods to the analysis of wheat endosperm cell wall composition, allowing the spatial distribution of structural components to be determined without the limitations of conventional chemical analysis. The advantages of the methods, described in this paper, are that they determine the composition of endosperm cell walls in situ and with minimal modification during preparation. Two bread-making wheat cultivars, Spark and Rialto, were selected to determine the impact of environmental conditions on the cell-wall composition of the starchy endosperm of the developing and mature grain, focusing on the period of grain filling (starting at about 14 days after anthesis). Studies carried out over two successive seasons show that the structure of the arabinoxylans in the endosperm cell walls changes from a highly branched form to a less branched form. Furthermore, during development the rate of restructuring was faster when the plants were grown at higher temperature with restricted water availability from 14 days after anthesis with differences in the rate of restructuring occurring between the two cultivars.

Crops and cultures in the Pacific: new data and new techniques for the investigation of old questions

Fifty years ago Carl Sauer suggested, controversially and on the basis of theory rather than evidence, that Southeast Asia was the source area for agriculture throughout the Old World, including the Pacific. Since then, the archaeobotanical record (macroscopic and microscopic) from the Pacific islands has increased, leading to suggestions, also still controversial, that Melanesia was a center of origin of agriculture independent of South-east Asia, based on tree fruits and nuts and vegetatively propagated starchy staples. Such crops generally lack morphological markers of domestication, so exploitation, cultivation and domestication cannot easily be distinguished in the archaeological record. Molecular studies involving techniques such as chromosome painting, DNA fingerprinting and DNA sequencing, can potentially complement the archaeological record by suggesting where species which were spread through the Pacific by man originated and by what routes they attained their present distributions. A combination of archaeobotanical and molecular studies should therefore eventually enable the rival claims of Melanesia versus South-east Asia as independent centers of invention of agriculture to be assessed.

Spatial patterns of gluten protein and polymer distribution in wheat grain

The starchy endosperm is the major storage tissue in the mature wheat grain and exhibits quantitative and qualitative gradients in composition, with the outermost cell layers being rich in protein, mainly gliadins, and the inner cells being low in protein but enriched in high-molecular-weight (HMW) subunits of glutenin. We have used sequential pearling to produce flour fractions enriched in particular cell layers to determine the protein gradients in four different cultivars grown at two nitrogen levels. The results show that the steepness of the protein gradient is determined by both genetic and nutritional factors, with three high-protein breadmaking cultivars being more responsive to the N treatment than a low-protein cultivar suitable for livestock feed. Nitrogen also affected the relative abundances of the three main classes of wheat prolamins: the sulfur-poor ω-gliadins showed the greatest response to nitrogen and increased evenly across the grain; the HMW subunits also increased in response to nitrogen but proportionally more in the outer layers of the starchy endosperm than near the core, while the sulfur-rich prolamins showed the opposite trend.

Distribution of gluten proteins in bread wheat (Triticum aestivum) grain

Quantitative and qualitative gradients in gluten protein composition are established during grain development. These gradients may be due to the origin of subaleurone cells, which unlike other starchy endosperm cells derive from the re-differentiation of aleurone cells, but could also result from the action of specific regulatory signals produced by the maternal tissue on specific domains of the gluten protein gene promoters.

Under-reporting of energy intake is more prevalent in a healthy dietary pattern cluster

The aim of the present study was to determine whether under-reporting rates vary between dietary pattern Clusters. Subjects were sixty-five Brazilian women. During 3 weeks, anthropometric data were collected. total energy expenditure (TEE) was determined by the doubly labelled water method and diet Was Measured. Energy intake (El) and the daily frequency of consumption per 1000 kJ of twenty-two food groups were obtained from a FFQ. These frequencies were entered into a Cluster analysis procedure in order to obtain dietary patterns. Under-reporters were defined Lis those who did not lose more than 1 kg of body weight during the study and presented EI:TEE less than 0.82. Three dietary pattern clusters were identified and named according to their most recurrent food groups: sweet foods (SW). starchy foods (ST) and health), (H). Subjects from the healthy cluster had the lowest mean EI:TEE (SW = 0.86, ST = 0.71 and H = 0.58: P = 0.003) and EI - TEE (SW = -0.49 MJ, ST = - 3.20 MJ and H = -5.09 MJ; P = 0.008). The proportion of Under-reporters was 45.2 (95 % CI 35.5, 55.0) % in the SW Cluster: 58.3 (95 % CI 48.6, 68.0) % in the ST Cluster and 70.0 (95 % CI 61.0, 79) % in the H cluster (P=0.34). Thus, in Brazilian women, Under-reporting of El is not uniformly distributed among, dietary pattern clusters and tends to be more severe among subjects from the healthy cluster. This cluster is more consistent with both dietary guidelines and with what lay individuals usually consider `healthy eating`.

Biocompósitos poliméricos obtidos a partir da fração lignocelulósica e amilácea do caroço de manga (mangifera indica), Tommy atkins

This employment has the function the utilization of mango seeds Tommy Atkins, like starch source to obtain biopolymers and fibers source and nanowhiskers cellulose also, that will be use like reinforcing fillers in micro and nanobiocomposites polymeric. The fibers in natura removed from tegument mango seed were characterized, as weel as the treated fibers and nanowhiskers of cellulose extracted from them. The starch extracted from seed s almond showed a good performance (32%) and a high purity. The chemicals analyzes, of crystallinity and morphological of the fibers in natura, treated fibers and nanowhiskers of cellulose confirmed the efficacy of the chemical treatement performed to remove amorphous constituents (hemicellulose and lignina). The thermoplastic starch (TPS) obtained from two sources, corn starch and starchy material mango, was produced in a twin screw extruder with compositon mass of 62,5% of starch, 9,4% of water and 28,1% of glycerol. The starch material mango was the main objective of this work for the production of biodegradable materials, and the starch corn was utilized during the production stage to evaluate the processability of the starch and use as parameter for comparison, according of being a conventional source for obtaining conventional comercial starch. The incorporation of fibers (6% in mass) and nanowhiskers cellulose (1% in mass) in matrix of TPS to obtain composite and nanocomposite, respectively, it was performed in single screw extruder. The biocomposites and bionanocomposites polymeric were obtained and the TPS from starchy material mango presented better results of thermal and mechanicals properties when compared to TPS corn starch. Concludes that the sediment generated of the agroindustrial processing mango used presents potencial to producing of biodegradables materials

Caracterização físico-química de algumas tuberosas amiláceas

As principais fontes de amido comercial no mundo são o milho, a batata e a mandioca. Entretanto, nos últimos anos vem crescendo o interesse em amidos naturais que possam ser utilizados pela indústria alimentícia. Assim, este trabalho teve por objetivo caracterizar, quanto à composição físico-química, açafrão, ahipa, araruta, batata-doce, biri, inhame e mandioquinha-salsa, tuberosas amiláceas potencialmente passíveis de introdução como matérias-primas de interesse comercial. Amostras das tuberosas foram analisadas quanto ao teor de umidade, cinzas, proteína, matéria graxa, açúcares redutores e totais, fibras e amido. Os resultados obtidos mostraram que das tuberosas analisadas as que apresentaram maior teor de amido foram a araruta (Maranta arundinacea), o inhame (Dioscorea sp) e o biri (Canna edulis), sendo que o inhame e o biri apresentaram também o maior rendimento potencial em toneladas de amido/hectare.

Extração e caracterização de amido de jacatupé (Pachyrhizus ahipa)

O gênero Pachyrhizus tem sido estudado como fonte de matéria-prima amilácea devido ao considerável teor de amido nas raízes de suas espécies. Neste trabalho objetivou-se caracterizar raízes de P. ahipa, processar em laboratório para a extração do amido e analisá-lo quanto à composição centesimal, teor de amilose, formato e tamanho de grânulos em microscópio eletrônico de varredura e viscosidade das pastas (RVA). As raízes de P. ahipa apresentaram 18% de massa seca sendo 7,68% amido. O rendimento obtido de amido foi baixo (4,28%), apontando para a necessidade de estudos que melhorem o processo de extração. O produto obtido apresentou 12,3% de umidade, 84% de amido com 13% de amilose e baixos teores de outros componentes (base úmida). A análise em microscópio eletrônico de varredura mostrou grânulos de amido de formas circular e poligonal, com tamanho variando entre 10 e 25mm. O perfil de viscosidade apresentado por este amido mostrou baixa temperatura de pasta (56ºC) e pico de viscosidade a 272 RVU, estando este último valor próximo ao observado para amido de mandioca, sob as mesmas condições. O amido de P. ahipa apresentou ainda, baixa estabilidade da pasta a quente e tendência à retrogradação com o resfriamento.

Embryology and seed development of Blastocaulon scirpeum and Paepalanthus scleranthus (Eriocaulaceae)

The embryology and seed structure of Blastocaulon scirpeum (Mart.) Giul. and Paepalanthus scleranthus Ruhland were studied in order to contribute to the embryology of Eriocaulaceae and supply data for future taxonomic studies. Both species present: anther with 4-layered wall; conspicuous endothecium with fibrous thickenings; secretory tapetum with uninucleate cells; successive microsporogenesis forming isobilateral microspore tetrads; bicellular pollen grains; orthotropous, bitegmic and tenuinucellate ovule; micropyle formed by the inner integument alone; megagametophyte of the Polygonum type, with a conspicuous antipodal cyst; nuclear and starchy endosperm; reduced, undifferentiated, and bell-shaped embryo; operculate and endotestal seed; seed coat derived from the two ovule integuments; and tanniniferous endotegmen. In addition, Blastocaulon scirpeum shows a bisporangiate anther and a 3-layered ovary wall, while P. scleranthus presents a tetrasporangiate anther that becomes bisporangiate at maturity, and a 2-layered ovary wall. This investigation shows that the bisporangiate condition does not suffice to separate Blastocaulon from Paepalanthus, since it is common to both. It also indicates, based on several embryological aspects, the proximity of Eriocaulaceae and Xyridaceae, which comply mainly with the features presented by the other commelinid families. These results may be used in future cladistic analysis of the family, and contribute to a better understanding of its phylogeny.

Desenvolvimento de óvulo, fruto e semente de espécies de Poaceae (Poales)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

HIDROLISADO DE FÉCULA DE MANDIOCA COMO ADJUNTO DE MALTE NA FABRICAÇÃO DE CERVEJA: AVALIAÇÃO QUÍMICA E SENSORIAL

Em virtude da progressiva substituição dos adjuntos amiláceos pelos xaropes com alta concentração de maltose nas cervejarias brasileiras, o presente trabalho teve por objetivo comparar hidrolisados de milho e de mandioca, como adjunto de malte, na fabricação de cerveja tipo Pilsen, em escala de laboratório. Os hidrolisados foram produzidos a partir de amido de milho e fécula de mandioca, sendo que na liqüefação e sacarificação da fração amilácea destes produtos foram utilizadas, respectivamente, as enzimas comerciais Termamil (alfa amilase bacteriana) e Fungamil (alfa amilase fúngica). Na fabricação das cervejas, a proporção de malte e hidrolisado foi de 2 para 1, na base do extrato. O mosto foi produzido pelo processo de infusão e após resfriamento e clarificação foi inoculado com levedura cervejeira de baixa fermentação. A fermentação transcorreu a 10 °C até 90% de atenuação do extrato aparente fermentável. As cervejas foram engarrafadas e, em seguida, maturadas a 0 °C, por 14 dias. Terminado o processo de fabricação, as cervejas foram analisadas química e sensorialmente. A semelhança na composição química dos hidrolisados de milho e de mandioca refletiu na composição química dos mostos e das cervejas. Não houve diferença estatística entre os mostos e entre as cervejas testadas para todos os parâmetros químicos analisados. Também, não existiu diferença sensorial entre as cervejas produzidas com hidrolisado de milho e hidrolisado de mandioca. Concluiu-se que a fécula de mandioca apresenta potencial de uso como matéria prima para a fabricação de xarope de maltose de uso cervejeiro e que há elevada probabilidade de sucesso no uso desse xarope para a fabricação de cervejas.

A SIMPLE METHOD FOR DETERMINING LOCATION OF FORAGING ANT NESTS USING LEAF-CUTTING ANTS AS A MODEL

In many situations, it is difficult to evaluate the location of nests of ants, especially in tropical systems, or to determine which trail system corresponds with which nest, as in the case of high-density populations of leaf-cutting ants, Atta spp. Fragments of colored drinking straws coated with an attractant, generally vegetable oil and/or a starchy carbohydrate, are carried by ants and following removal of the attractant are deposited in middens, allowing determination of the origin of foraging workers.

Embryology and seed development of Syngonanthus caulescens (Poir.) Ruhland (Eriocaulaceae-Poales)

The embryology and the seed development of Syngonanthus caulescens are presented. This species possesses: a bithecous and tetrasporangiate anther, with a four-layered wall, a conspicuous endothecium of the baseplate type, a secretory tapetum formed by uninucleate cells, successive microsporogenesis resulting in isobilateral microspore tetrads, spiraperturate and binucleate pollen grains, an orthotropous, pendulous, bitegmic and terminucellate ovule, with a micropyle formed only by the inner integument, a megagametophyte of the Polygonum type, with formation of an antipodal cyst, free-nuclear and starchy endosperm, a broad and bell-shaped embryo, operculate and endotestal seeds, a seed coat derived from the inner layers of both integuments, and tanniniferous endotegmen. These embryological aspects are characteristic not only for Syngonanthus, but for the whole family, with few differences between genera. Furthermore, the pollen grain of the spiraperturate type and the cystic arrangement of the antipodals in the megagametophyte are peculiar and very distinctive features of Eriocaulaceae within the other Poales (commelinids). (c) 2006 Elsevier B.V. All rights reserved.

Biofuels potential in Guyana

Includes bibliography

Características estruturais e físico-químicas de amidos obtidos de diferentes fontes botânicas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)