Open and standardized tools for smart transducer networking

IEEE 1451 Standard is intended to address the smart transducer interfacing problematic in network environments. Usually, proprietary hardware and software is a very efficient solution to in planent the IEEE 1451 normative, although can be expensive and inflexible. In contrast, the use of open and standardized tools for implementing the IEEE 1451 normative is proposed in this paper. Tools such as Java and Phyton programming languages, Linux, programmable logic technology, Personal Computer resources and Ethernet architecture were integrated in order to constructa network node based on the IEEE 1451 standards. The node can be applied in systems based on the client-server communication model The evaluation of the employed tools and expermental results are presented. © 2005 IEEE.

NCAP embedded using structured programming

This paper presents a network node embedded based on IEEE 1451 standard developed using structured programming to access the transducers in the WTIM. The NCAP was developed using Nios II processor and uClinux, a embedded operating system developed to features restricted hardware. Both hardware and software have dynamics features and they can be configured based in the application features. Based in this features, the NCAP was developed using the minimum components of hardware and software to that being implemented in remote environment like central point of data request. Many NCAP works are implemented with an object oriented structure. This is different from the surrounding implementations. In this project the NCAP was developed using structured programming. The tests of the NCAP were made using a ZigBee interface between NCAP and WTIM and the system demonstrated in areas of difficult access for long period of time due to need for low power consumption. © 2012 IEEE.

Teds-easy - descrição automática de transducer electronic data sheet

Pós-graduação em Engenharia Elétrica - FEIS

IEEE 802.21: Media Independent Handover

In questo lavoro, dopo un'introduzione sul panorama contemporaneo, si è analizzato lo standard IEEE 802.21, illustrandone i motivi che hanno portato al suo sviluppo, la timeline del processo di standardizzazione, gli obbiettivi del working group, l'architettura del sistema specificato e le sue funzionalità, con particolare riguardo all'utilità in applicazioni reali, al fine di darne un giudizio completo sulla sua effettiva efficacia. Dopo aver citato qualche esempio di possibile applicazione dello standard e descritto lo stato attuale dell'arte, si è studiata una sua implementazione cross-platform chiamata ODTONE, descrivendone i vari componenti e le loro funzionalità, ma anche sottolineando le attuali mancanze per arrivare ad una implementazione completa sotto tutti i punti di vista. Successivamente si è studiata ed implementata un'applicazione, MIH-proxy, che potesse sfruttare in modo costruttivo i servizi specificati dallo standard per creare un proxy che potesse scegliere su quale interfaccia instradare i pacchetti a seconda dello stato attuale di tutti i collegamenti, realizzato in versione unidirezionale e bidirezionale. In particolare questa applicazione è in grado di restare in ascolto di cambiamenti di stato delle interfacce di rete, e.g. quando viene stabilita una connessione oppure cade, e, di conseguenza, stabilire di volta in volta quali collegamenti utilizzare per inviare dati. Nella versione bidirezionale è anche possibile far comunicare tra loro applicazioni che normalmente utilizzerebbero il protocollo di trasporto TCP attraverso un ulteriore componente, phoxy, che si preoccupa di convertire, in modo trasparente, un flusso TCP in datagrammi UDP eventualmente cifrati. Sarà quindi possibile creare un collegamento criptato ad alta affidabilità tra le applicazioni che possa sfruttare tutte le interfacce disponibili, sia per inviare, sia per ricevere.

Una rassegna delle tecnologie di rete wireless WRAN IEEE 802.22 e mobile WiMAX IEEE 802.16e

Lo scopo di questa tesi è quello di illustrare gli standard IEEE 802.22 WRAN e IEEE 802.16e Mobile WiMAX. Di questi standard verranno analizzate le caratteristiche principali, i metodi di funzoinamento ed alcuni protocolli. Nel primo capitolo viene fatta una breve spiegazione delle tecnologie wireless con un focus sullo spettro radio, sulle tecniche di modulazione dell’onda radio, sugli scenari operativi LOS, nLOS ed NLOS, sulle tecniche di duplexing e le tecniche di accesos multiplo, inoltre vengono brevente illustrate alcune delle problematiche che affliggono le trasmissioni senza fili ed infine vengono illustrate i quattro più comuni livelli di QoS. Nel secondo capitolo viene illustrato lo standard IEEE 802.22 con un focus sullo stato dell’arte della tecnologia WRAN, come si è sviluppato lo standard e per quali motivi è stato redatto, lo spettro di frequeza utilizzato e come, il funzionamento delle Cognitive Radio, i dispositivi che caratterizzano le reti WRAN e la topologia di rete utilizzata. In seguito sono spiegati nello specifico i livelli fisico e MAC e le loro caratteristiche e metodi di funzionamento. Nel terzo capitolo vengono illustrate le caratteristiche dello standard IEEE 802.16e cercando di riprendere gli stessi punti toccati nel capitolo precedente con una caratterizzazione dello standard nei suoi particolari.

An IEEE 802.11 energy efficient mechanism for continuous media applications

The widespread deployment of wireless mobile communications enables an almost permanent usage of portable devices, which imposes high demands on the battery of these devices. Indeed, battery lifetime is becoming one the most critical factors on the end-users satisfaction when using wireless communications. In this work, the optimized power save algorithm for continuous media applications (OPAMA) is proposed, aiming at enhancing the energy efficiency on end-users devices. By combining the application specific requirements with data aggregation techniques, {OPAMA} improves the standard {IEEE} 802.11 legacy Power Save Mode (PSM) performance. The algorithm uses the feedback on the end-user expected quality to establish a proper tradeoff between energy consumption and application performance. {OPAMA} was assessed in the OMNeT++ simulator, using real traces of variable bitrate video streaming applications, and in a real testbed employing a novel methodology intended to perform an accurate evaluation concerning video Quality of Experience (QoE) perceived by the end-users. The results revealed the {OPAMA} capability to enhance energy efficiency without degrading the end-user observed QoE, achieving savings up to 44 when compared with the {IEEE} 802.11 legacy PSM.

A practical approach for profit-based unit commitment with emission limitations

This paper proposes a practical approach for profit-based unit commitment (PBUC) with emission limitations. Under deregulation, unit commitment has evolved from a minimum-cost optimisation problem to a profit-based optimisation problem. However, as a consequence of growing environmental concern, the impact of fossil-fuelled power plants must be considered, giving rise to emission limitations. The simultaneous address of the profit with the emission is taken into account in our practical approach by a multiobjective optimisation (MO) problem. Hence, trade-off Curves between profit and emission are obtained for different energy price profiles, in a way to aid decision-makers concerning emission allowance trading. Moreover, a new parameter is presented, ratio of change, and the corresponding gradient angle, enabling the proper selection of a compromise commitment for the units. A case study based on the standard IEEE 30-bus system is presented to illustrate the proficiency Of Our practical approach for the new competitive and environmentally constrained electricity supply industry.

Unit Commitment in a Competitive and Emission Constrained Environment

This paper is on the unit commitment problem, considering not only the economic perspective, but also the environmental perspective. We propose a bi-objective approach to handle the problem with conflicting profit and emission objectives. Numerical results based on the standard IEEE 30-bus test system illustrate the proficiency of the proposed approach.

Reconfigurable weblabs based on the IEEE1451 Std

Technology plays a double role in Education: it can act as a facilitator in the teaching/learning process and it can be the very subject of that process in Science & Engineering courses. This is especially true when students perform laboratory activities where they interact with equipment and objects under experimentation. In this context, technology can also play a facilitator role if it allows students to perform experiments in a remote fashion, through the Internet, in a so-called weblab or remote laboratory. No doubt, the Internet has been revolutionizing the educational process in many aspects, and it can be stated that remote laboratories are just an angle of that on-going revolution. As any other educational tool or resource, the i) pedagogical approach and the ii) technology used in the development of a remote laboratory can dictate its general success or its ephemeral existence. By pedagogical approach we consider the way remote experiments address the process by which students acquire experimental skills and link experimental results to theoretical concepts. In respect to technology, we discuss different specification and implementation alternatives, to show the case where the adoption of a family of standards would positively contribute to a larger acceptance and utilization of remote laboratories, and also to a wider collaboration in their development.

From design-for-test to design-for-debug-and-test: analysis of requirements and limitations for 1149.1

The increasing complexity of VLSI circuits and the reduced accessibility of modern packaging and mounting technologies restrict the usefulness of conventional in-circuit debugging tools, such as in-circuit emulators for microprocessors and microcontrollers. However, this same trend enables the development of more complex products, which in turn require more powerful debugging tools. These conflicting demands could be met if the standard scan test infrastructures now common in most complex components were able to match the debugging requirements of design verification and prototype validation. This paper analyses the main debug requirements in the design of microprocessor-based applications and the feasibility of their implementation using the mandatory, optional and additional operating modes of the standard IEEE 1149.1 test infrastructure.

Desenvolvimento de uma infra-estrutura de software para suportar conceitos de eficiência energética usando sistemas móveis pró-activos

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Le support de VoIP dans les réseaux maillés sans fil WiMAX en utilisant une approche de contrôle et d'assistance au niveau MAC

Les réseaux maillés sans fil (RMSF), grâce à leurs caractéristiques avantageuses, sont considérés comme une solution efficace pour le support des services de voix, vidéo et de données dans les réseaux de prochaine génération. Le standard IEEE 802.16-d a spécifié pour les RMSF, à travers son mode maillé, deux mécanismes de planifications de transmission de données; à savoir la planification centralisée et la planification distribuée. Dans ce travail, on a évalué le support de la qualité de service (QdS) du standard en se focalisant sur la planification distribuée. Les problèmes du système dans le support du trafic de voix ont été identifiés. Pour résoudre ces problèmes, on a proposé un protocole pour le support de VoIP (AVSP) en tant qu’extension au standard original pour permettre le support de QdS au VoIP. Nos résultats préliminaires de simulation montrent qu’AVSP offre une bonne amélioration au support de VoIP.

Reliable Solid Modelling Using Subdivision Surfaces

Les surfaces de subdivision fournissent une méthode alternative prometteuse dans la modélisation géométrique, et ont des avantages sur la représentation classique de trimmed-NURBS, en particulier dans la modélisation de surfaces lisses par morceaux. Dans ce mémoire, nous considérons le problème des opérations géométriques sur les surfaces de subdivision, avec l'exigence stricte de forme topologique correcte. Puisque ce problème peut être mal conditionné, nous proposons une approche pour la gestion de l'incertitude qui existe dans le calcul géométrique. Nous exigeons l'exactitude des informations topologiques lorsque l'on considère la nature de robustesse du problème des opérations géométriques sur les modèles de solides, et il devient clair que le problème peut être mal conditionné en présence de l'incertitude qui est omniprésente dans les données. Nous proposons donc une approche interactive de gestion de l'incertitude des opérations géométriques, dans le cadre d'un calcul basé sur la norme IEEE arithmétique et la modélisation en surfaces de subdivision. Un algorithme pour le problème planar-cut est alors présenté qui a comme but de satisfaire à l'exigence topologique mentionnée ci-dessus.

Design of boundary-scan testing in CMOS image sensors for industrial applications: internship repor

Tests on printed circuit boards and integrated circuits are widely used in industry,resulting in reduced design time and cost of a project. The functional and connectivity tests in this type of circuits soon began to be a concern for the manufacturers, leading to research for solutions that would allow a reliable, quick, cheap and universal solution. Initially, using test schemes were based on a set of needles that was connected to inputs and outputs of the integrated circuit board (bed-of-nails), to which signals were applied, in order to verify whether the circuit was according to the specifications and could be assembled in the production line. With the development of projects, circuit miniaturization, improvement of the production processes, improvement of the materials used, as well as the increase in the number of circuits, it was necessary to search for another solution. Thus Boundary-Scan Testing was developed which operates on the border of integrated circuits and allows testing the connectivity of the input and the output ports of a circuit. The Boundary-Scan Testing method was converted into a standard, in 1990, by the IEEE organization, being known as the IEEE 1149.1 Standard. Since then a large number of manufacturers have adopted this standard in their products. This master thesis has, as main objective: the design of Boundary-Scan Testing in an image sensor in CMOS technology, analyzing the standard requirements, the process used in the prototype production, developing the design and layout of Boundary-Scan and analyzing obtained results after production. Chapter 1 presents briefly the evolution of testing procedures used in industry, developments and applications of image sensors and the motivation for the use of architecture Boundary-Scan Testing. Chapter 2 explores the fundamentals of Boundary-Scan Testing and image sensors, starting with the Boundary-Scan architecture defined in the Standard, where functional blocks are analyzed. This understanding is necessary to implement the design on an image sensor. It also explains the architecture of image sensors currently used, focusing on sensors with a large number of inputs and outputs.Chapter 3 describes the design of the Boundary-Scan implemented and starts to analyse the design and functions of the prototype, the used software, the designs and simulations of the functional blocks of the Boundary-Scan implemented. Chapter 4 presents the layout process used based on the design developed on chapter 3, describing the software used for this purpose, the planning of the layout location (floorplan) and its dimensions, the layout of individual blocks, checks in terms of layout rules, the comparison with the final design and finally the simulation. Chapter 5 describes how the functional tests were performed to verify the design compliancy with the specifications of Standard IEEE 1149.1. These tests were focused on the application of signals to input and output ports of the produced prototype. Chapter 6 presents the conclusions that were taken throughout the execution of the work.

Development of heterogeneous node network using microcontroller with protocols CAN and Zigbee

In this paper was proposed the development of an heterogeneous system using the microcontroller (AT90CANI28) where the protocol model CAN and the standard IEEE 802.15.4 are connected. This module is able to manage and monitor sensors and actuators using CAN and, through the wireless standard 802.15.4, communicate with the other network modules. © 2011 IEEE.