Analysis of stamping production data with view towards quality management

A quality analysis trial was undertaken at Ford Geelong Stamping Plant on a press line that was fitted with standard press sensors to measure press and binder force over the stamping cycle for each panel. The quality of randomly sampled panels was measured by obtaining the panel thicknesses at five points, for 135 panels in total. These points were chosen such that they exhibited different forming modes. This paper analyses the input force data and the output quality data from the trial to determine any potential relationships. The analysis of the production data was performed using statistical correlation techniques to determine initial potential relationships between input and output variables. An Active Shape Model was used to extract features when identifying the major sources of variation within the input data. However, the initial analysis of the data elicited no direct relationship between the input variables measured and the panel thicknesses. This result is significant as the data collected is from a standard sensor configuration found in many press lines through-out the world. The reason for the lack of a direct relationship is believed to come from the lack of sensitivity in the force measurements which are not able to identify small changes in the process, whereas gross geometric variations have in previous studies shown an obvious relationship with changes in the force press profile. This means that existing force sensors require augmentation by additional sensors if a detailed automatic quality control system for the press lines based on input sensors alone.

Analysis of water quality standards, Upper Sangamon Basin, Illinois /

Cover title.

Analysis of water quality : Rock River Basin in Illinois /

Cover title.

Analysis of water quality : upper Kaskaskia River Basin, Illinois /

Bibliography: p. 31-1-31-4.

Using image quality metrics to detect smoke-affected laser data

Field robots often rely on laser range finders (LRFs) to detect obstacles and navigate autonomously. Despite recent progress in sensing technology and perception algorithms, adverse environmental conditions, such as the presence of smoke, remain a challenging issue for these robots. In this paper, we investigate the possibility to improve laser-based perception applications by anticipating situations when laser data are affected by smoke, using supervised learning and state-of-the-art visual image quality analysis. We propose to train a k-nearest-neighbour (kNN) classifier to recognise situations where a laser scan is likely to be affected by smoke, based on visual data quality features. This method is evaluated experimentally using a mobile robot equipped with LRFs and a visual camera. The strengths and limitations of the technique are identified and discussed, and we show that the method is beneficial if conservative decisions are the most appropriate.

Design of coreless PCB transformers for power and signal isolation in a modular ADC system for power quality data acquisition

Available industrial energy meters offer high accuracy and reliability, but are typically expensive and low-bandwidth, making them poorly suited to multi-sensor data acquisition schemes and power quality analysis. An alternative measurement system is proposed in this paper that is highly modular, extensible and compact. To minimise cost, the device makes use of planar coreless PCB transformers to provide galvanic isolation for both power and data. Samples from multiple acquisition devices may be concentrated by a central processor before integration with existing host control systems. This paper focusses on the practical design and implementation of planar coreless PCB transformers to facilitate the module's isolated power, clock and data signal transfer. Calculations necessary to design coreless PCB transformers, and circuits designed for the transformer's practical application in the measurement module are presented. The designed transformer and each application circuit have been experimentally verified, with test data and conclusions made applicable to coreless PCB transformers in general.

Spatial Analysis and Characterisation of Lentic Ecosystems: A Case Study of Varthur Lake, Bangalore

Lentic ecosystems vital functions such as recycling of nutrients, purification of water, recharge of groundwater,augmenting and maintenance of stream flow and habitat provision for a wide variety of flora and fauna along with their recreation values necessitates their sustainable management through appropriate conservation mechanisms. Failure to restore these ecosystems will result in extinction of species or ecosystem types and cause permanent ecological damage. In Bangalore, lentic ecosystems (for example lakes) have played a prominent role serving the needs of agriculture and drinking water. But the burgeoning population accompanied by unplanned developmental activities has led to the drastic reduction in their numbers (from 262 in 1976 to 81). The existing water bodies are contaminated by residential, agricultural, commercial and industrial wastes/effluents. In order to restore the ecosystem, assessment of the level of contamination is crucial. This paper focuses on characterisation and restoration aspects of Varthur lake based on hydrological, morphometric, physical-chemical and socio-economic investigations for a period of six months covering post monsoon seasons. The results of the water quality analysis show that the lake is eutrophic with high concentrations of phosphorous and organic matter. The morphometric analysis indicates that the lake is shallow in relation to its surface area. Socio-economic analyses show dependence of local residents for irrigation, fodder, etc. These analyses highlight the need and urgency to restore the physical, chemical and biological integrity through viable restoration and sustainable watershed management strategies, which include pollution abatement, catchment treatment, desilting of the lake and educating all stakeholders on the conservation and restoration of lake ecosystems.

Analysis of information leakage from encrypted Skype conversations

Voice over IP (VoIP) has experienced a tremendous growth over the last few years and is now widely used among the population and for business purposes. The security of such VoIP systems is often assumed, creating a false sense of privacy. This paper investigates in detail the leakage of information from Skype, a widely used and protected VoIP application. Experiments have shown that isolated phonemes can be classified and given sentences identified. By using the dynamic time warping (DTW) algorithm, frequently used in speech processing, an accuracy of 60% can be reached. The results can be further improved by choosing specific training data and reach an accuracy of 83% under specific conditions. The initial results being speaker dependent, an approach involving the Kalman filter is proposed to extract the kernel of all training signals.

Defect analysis of semiconductor thin films for photovoltaic applications using photo-luminescence and photo-conductivity

The present thesis can be divided into three areas:1) the fabrication of a low temperature photo-luminescence and photoconductivity measuring unit 2) photo-luminescence in the chalcopyrite CulnSez and CulnS2 system for defect and composition analysis and 3) photo-luminescence and photo-conductivity of In:JS3. This thesis shows that photo-luminescence is one of most essential semiconductor characterization tool for a scientific group working on photovoltaics. Tools which can be robust, non-destructive, requiring minimal sample preparation for analysis and most informative of the device applications are sought after by industries and this thesis is towards establishing photo-luminescence as "THE" tool for semiconductor characterization. The possible application of photo-luminescence as a tool for compositional and quality analysis of semiconductor thin films has been worked upon by this thesis. Photo-conductivity complement photo-luminescence and together they provide all the information required for the fabrication of an opto-electronic device.

Estructura i ultraestructura testicular del mascle reproductor porcí (Sus domesticus)

El present treball analitza al microscopi òptic i al microscopi electrònic de transmissió el testicle de Sus domesticus (raça Landrace - varietat anglesa) a partir de mascles reproductors porcins adults i sans. L'objectiu principal de tots els centres d'Inseminació Artificial Porcina i de les Explotacions de Selecció i Multiplicació Porcina és garantir una excel·lent qualitat espermàtica al llarg de la vida reproductiva útil d'un mascle reproductor porcí. Així doncs, un millor coneixement dels patrons estructural i ultraestructural normals del testicle permetrà diagnosticar amb facilitat quina ha estat l'estructura o funció testicular afectada quan s'observa una disminució de la qualitat del semen. Les anàlisis seminals i hormonals són certament crucials en la valoració d'aquests mascles, però, no són totalment informatives de les alteracions testiculars, ja que és necessari conèixer l'organització microscòpica. Diversos estudis sobre testicle han demostrat que els marcadors més sensibles per a l'avaluació de la funció testicular són els següents: (1) la grandària testicular, (2) el gruix i l'organització de la càpsula testicular, (3) el percentatge de túbuls seminífers i de teixit intersticial en el parènquima testicular, (4) el diàmetre dels túbuls seminífers, (5) l'alçada i la composició de cèl·lules germinals de l'epiteli seminífer, (6) el gruix i l'organització de la làmina pròpia i, (7) la morfologia i la grandària de les cèl·lules de Leydig. El primer objectiu concret del present estudi ha estat, per tant, caracteritzar tots aquests paràmetres testiculars en mascles porcins sans i adults. L'organització estructural del testicle i les mesures quantitatives utilitzades com a marcadors no mostren diferències significatives ni entres els mascles porcins (P > 0,01), ni entre el testicle dret i l'esquerre (P > 0,01). Els testicles, de 330,80  16,99 g de pes, estan envoltats per una càpsula, de 2.375,13  246,68 m de gruix, la qual es divideix en tres capes: la túnica vaginalis constitueix l'1,82  0,78 % de la càpsula i està composta per una capa mesotelial externa i una capa interna de teixit conjuntiu dens; la túnica albuginea representa el 37,31  3,27 % i és de teixit conjuntiu dens i, la túnica vasculosa constitueix el 64,24 4,40 % i és de teixit conjuntiu lax. En el parènquima testicular els túbuls seminífers i el teixit intersticial representen el 72,44  2,12 % i el 27,46  2,12 %, respectivament. Els túbuls seminífers, de 226,23  18,08 m de diàmetre, es troben fortament recargolats i empaquetats, i estan compostos per la làmina pròpia i l'epiteli seminífer. La làmina pròpia, de 4-4,5 m de gruix, està formada per la làmina basal i dues capes de cèl·lules peritubulars. L'epiteli seminífer, amb una alçada mitjana de 66,11  10,62 m, és columnar i estratificat amb cèl·lules de Sertoli i diferents generacions d'espermatogònies, espermatòcits i espermàtides. El teixit intersticial és un teixit conjuntiu lax amb abundants cèl·lules de Leydig polièdriques fortament empaquetades (ca. 15 x 12 m). El segon objectiu concret d'aquest estudi ha estat estudiar des del punt de vista morfològic i morfomètric (alçada, longitud, freqüència relativa d'aparició i durada) els estadis del cicle de l'epiteli seminífer en els mascles porcins de la raça Landrace (varietat anglesa), classificats d'acord amb el mètode de la morfologia tubular. Els estadis premeiòtics ( I, II i III) ocupen el 31,9 % del cicle espermatogènic i es caracteritzen, principalment, per la presència de cèl·lules en les fase inicials de la meiosi I. Les primeres etapes de la meiosi I no afecten els paràmetres morfomètrics de l'epiteli seminífer ja que els valors obtinguts per l'alçada de l'epiteli seminífer, la freqüència relativa, la longitud i la durada d'aquests estadis són molt variables. Els estadis meiòtics (IV i V) representen el 16,4 % del cicle espermatogènic i estan constituïts, principlament, per cèl·lules en un estat avançat de la meiosi I i /o cèl·lules en meiosi II. Les últimes fases de la meiosi I i també de la meiosi II tenen lloc ràpidament, la qual cosa resulta en una baixa freqüència relativa d'aparició i, per tant, en una baixa durada dels estadis meiòtics. Els estadis postmeiòtics (VI, VII i VIII) ocupen el 50,6 % del cicle espermatogènic. L'esdeveniment més important que té lloc en aquests estadis és la fase de maduració de l'espermiogènesi. En la fase de maduració, les espermàtides experimenten diverses modificacions morfològiques i estructurals que donen lloc, finalment, als espermatozoides. La complexitat d'aquests processos fa que els estadis postmeiòtics presentin valors més grans de freqüència relativa, longitud i durada. El tercer objectiu concret d'aquest treball ha estat descriure a nivell ultraestructural el procés d'espermiogènesi, i relacionar les transformacions que experimenten les espermàtides en fase d'elongació amb els canvis ultraestructurals que tenen lloc en les diferents cèl·lules que constitueixen el testicle (cèl·lules germinals, de Sertoli i de Leydig, principalment). L'espermiogènesi del mascle porcí de la raça Landrace (varietat anglesa) s'ha dividit en 9 passos que vénen definits per 9 tipus diferents d'espermàtides. Al llarg de l'espermiogènesi no s'observen diferències ultraestructurals significatives (P > 0,01) ni entre els mascles porcins ni entre el testicle esquerre i dret en les cèl·lules que constitueixen el testicle.

Targeted exercise against osteoporosis : a systematic review and meta-analysis for optimising bone strength throughout life

Background
Exercise is widely recommended to reduce osteoporosis, falls and related fragility fractures, but its effect on whole bone strength has remained inconclusive. The primary purpose of this systematic review and meta-analysis was to evaluate the effects of long-term supervised exercise (≥6 months) on estimates of lower-extremity bone strength from childhood to older age.

Methods
We searched four databases (PubMed, Sport Discus, Physical Education Index, and Embase) up to October 2009 and included 10 randomised controlled trials (RCTs) that assessed the effects of exercise training on whole bone strength. We analysed the results by age groups (childhood, adolescence, and young and older adulthood) and compared the changes to habitually active or sedentary controls. To calculate standardized mean differences (SMD; effect size), we used the follow-up values of bone strength measures adjusted for baseline bone values. An inverse variance-weighted random-effects model was used to pool the results across studies.

Results
Our quality analysis revealed that exercise regimens were heterogeneous; some trials were short in duration and small in sample size, and the weekly training doses varied considerably between trials. We found a small and significant exercise effect among pre- and early pubertal boys [SMD, effect size, 0.17 (95% CI, 0.02-0.32)], but not among pubertal girls [-0.01 (-0.18 to 0.17)], adolescent boys [0.10 (-0.75 to 0.95)], adolescent girls [0.21 (-0.53 to 0.97)], premenopausal women [0.00 (-0.43 to 0.44)] or postmenopausal women [0.00 (-0.15 to 0.15)]. Evidence based on per-protocol analyses of individual trials in children and adolescents indicated that programmes incorporating regular weight-bearing exercise can result in 1% to8% improvements in bone strength at the loaded skeletal sites. In premenopausal women with high exercise compliance, improvements ranging from 0.5% to 2.5% have been reported.

Conclusions
The findings from our meta-analysis of RCTs indicate that exercise can significantly enhance bone strength at loaded sites in children but not in adults. Since few RCTs were conducted to investigate exercise effects on bone strength, there is still a need for further well-designed, long-term RCTs with adequate sample sizes to quantify the effects of exercise on whole bone strength and its structural determinants throughout life.

Effect of citrus sudden death on yield and quality of sweet orange cultivars in Brazil

Citrus sudden death (CSD) has greatly affected sweet orange cultivars grafted on Rangpur lime in São Paulo and Minas Gerais States, Brazil. To characterize and quantify CSD damage, fruit yield and quality were assessed in each combination of sweet orange cultivar (Hamlin, Pera, Natal, and Valencia), age class (3 to 5, 6 to 10, and 11 to 15 years old), and CSD severity class (0 = no symptom, 1 = initial symptoms, and 2 = severe symptoms). For each combination, 10 trees were harvested and 20 fruit were taken for quality analysis. Damage was characterized by reduc_ tion of: (i) total weight of fruit/tree (36 and 67% for severity class 1 and 2, respectively), (ii) number of fruit/tree (27 and 55%), (iii) fruit size (13 and 25% in diameter and height [stem to styler distance]), (iv) fruit weight (32 and 56%), (v) total soluble solids (TSS)/fruit (18 and 42%), and increase of (vi) Brix (14 and 34%), (vii) acidity (16 and 41%), and (viii) TSS/90-1b. box (21 and 33%). There was no alteration on Brix/acidity ratio and percentage of juice on fruit of affected trees. Sweet orange cultivars did not differ in percentage of reduction or increase of all yield and quality variables, with the exception of Pera, which expressed increases of Brix and acidity. For more severe affected trees, the youngest plants showed a higher reduction in fruit number/tree, whereas plants 6 to 10 years old showed a higher increase in fruit acidity and TSS/box. However, no differences in percentage of reduction or increase for other variables were observed among different age classes. The damage to the above probably was associated with reduced water absorption capacity of CSD-affected trees.

Extended depth from focus reconstruction using NIH ImageJ plugins: Quality and resolution of elevation maps

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação seminal e testicular de cães submetidos à administração de cisplatina

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Quality in anthurium andraeanum after postharvest BAP treatment

To ensure the ongoing quality of anthurium inflorescence it is necessary to use postharvest treatments aimed at extending the vase life and delaying senescence. Thus, the objective of this study was to assess the effect of postharvest spray application of 6-benzylaminopurine (BAP) in anthurium quality and sugar levels. Two experiments were done, one where inflorescences were sprayed 0, 100 and 200 mg L-1 of BAP and kept under 23±1°C and relative humidity of 65±5% for evaluations, and in the second experiment BAP concentrations were reduced to 0, 50 and 100 mg L-1 and inflorescences were cold stored for 2 days at 13±1°C and then transferred to the same evaluation conditions from the first experiment. Quality assessments were performed according to Paull (1982) for spathe loss of gloss and blueing and spadix necrosis along with stem weighting for fresh weight (FW) variation every two days. In the first experiment FW loss was significantly lower from the 14th until 26th day after harvest. Anthurium sprayed with 100 and 200 mg L-1 showed significantly less fresh weight loss when compared to control stems and in the second experiment 50 and 100 mg L-1 did not reduce fresh weight loss. Means of scores from quality analysis, blueing and loss of gloss of spathes and spadix necrosis, were significantly lower in BAP sprayed anthurium (100 and 200 mg L-1) than in control flowers and by lowering BAP spray concentration and cold storing stems for two days this positive effect was only observed for spadix necrosis and not observed for spathe parameters.