Soil humus characteristics in virgin and cleared areas of the paraná river basin in Brazil

A study of the characteristics and distribution of the soil humus fractions in representative ecosystems of central Brazil was carried out with special emphasis on the comparison between the soils under virgin vegetation-Cerrado-and those subjected to cultivation. In spite of the contrasted vegetation and cultural practices in the sites studied, the soil humus showed analogous characteristics: there was a negligible amount of plant residues, the humic and fulvic acids amounted to approximately 70% of the total organic carbon, and about 40% of these humic substances were in extremely stable association with the soil mineral fraction, the HCl-HF treatment being required for their extraction. The stability of such organo-mineral complexes increased slightly in the cultured sites. The study of the humic acid fraction showed increased oxidation and aromaticity in most of the cultivated sites: the lowest values for the IR alkyl vibrations and H/C atomic ratios and the highest ones for the optical density at 465 nm were observed in sites transformed into orchards, whereas the above changes were small in those used as pasture. The 14C NMR spectra confirmed that the proportion of polyalkyl structures decreased in the humic acids of soils subjected to cultivation, as opposed to that of carboxyl groups. In spite of the high stability inferred for the organic matter throughout the wide area examined, the samples from the original Cerrado as well as from those transformed into pastures showed, in laboratory conditions, higher mineralization rates than those from the sites subjected to cultivation. This is partly attributed to the decreased proportions of extractable humic substances in the latter. © 1992.

Effect of milk treatment on acidification, physicochemical characteristics, and probiotic cell counts in low fat yogurt

The effect of milk treatment (heat, high hydrostatic pressure - HHP, or combined heat and HHP) on acidification, physicochemical characteristics, and probiotic cell counts in low fat yogurt was studied. All samples were analyzed for fermentation time, pH, titratable acidity, total solids, water-holding capacity, syneresis, Hunter L*, a*, and b* values, Streptococcus thermophilus, Lactobacillus delbrueckii ssp bulgaricus, L. acidophilus, and Bifidobacterium longum. The application of HHP combined with thermal treatment resulted in yogurt gels with attractive physicochemical characteristics and high water-holding capacity. In addition to this, the milk treatment did not affect the probiotic bacteria growth. The balance of strains in the starter culture and level of inoculation influenced the yogurt fermentation and properties. The use of combined heat and HHP to treat milk before yogurt fermentation could be an alternative process for obtaining high quality, additive-free healthy products.

Effect of ball milling on structural and physicochemical characteristics of cassava and Peruvian carrot starches

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Physicochemical characteristics of experimental net melon hybrids developed in Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of ball milling on the physicochemical characteristics of Peruvian carrot and cassava starches

Peruvian carrot and cassava starches were ground in a ball mill for 4, 8, 16, and 32 h and their structural and physicochemical characteristics were determined. Results obtained from HPAEC-PAD, GPC, and amylose content indicated a breaking of hydrogen bounds and α-(1 [RIGHTWARDS ARROW] 6) linkages of the starch molecules after treatment. X-ray diffractograms showed that the milling provided a reduction in the crystalline area of the starch granules. Most of the starch granules displayed agglomeration after 4 h of milling, when observed under a scanning electron microscope, and after 16 h a shapeless mass was observed for Peruvian carrot starch. Solubility and water absorption capacity of the starches increased with an increase in the milling time, while RVA profiles showed a progressive reduction of peak, breakdown, and final viscosities, as well as the development of initial viscosity. Gelatinization temperatures and enthalpies were reduced. Prolonged ball milling accelerated the enthalpy relaxation in both starches. These results confirmed a partial gelatinization of the starches, which was 82.6% for Peruvian carrot and 65.4% for cassava starches after 32 h of milling. The Peruvian carrot starch was more affected by the ball milling because of both its lower amylose content and the defects in its crystalline structure

Morphological, thermal and physicochemical characteristics of small granules starch from Mirabilis jalapa L

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of nitrogen and soil physical characteristics on belowground carbon flux dynamics of woody plants

At ecosystem level soil respiration (Rs) represents the largest carbon (C) flux after gross primary productivity, being mainly generated by root respiration (autotrophic respiration, Ra) and soil microbial respiration (heterotrophic respiration, Rh). In the case of terrestrial ecosystems, soils contain the largest C-pool, storing twice the amount of C contained in plant biomass. Soil organic matter (SOM), representing the main C storage in soil, is decomposed by soil microbial community. This process produces CO2 which is mainly released as Rh. It is thus relevant to understand how microbial activity is influenced by environmental factors like soil temperature, soil moisture and nutrient availability, since part of the CO2 produced by Rh, directly increases atmospheric CO2 concentration and therefore affects the phenomenon of climate change. Among terrestrial ecosystems, agricultural fields have traditionally been considered as sources of atmospheric CO2. In agricultural ecosystems, in particular apple orchards, I identified the role of root density, soil temperature, soil moisture and nitrogen (N) availability on Rs and on its two components, Ra and Rh. To do so I applied different techniques to separate Rs in its two components, the ”regression technique” and the “trenching technique”. I also studied the response of Ra to different levels of N availability, distributed either in a uniform or localized way, in the case of Populus tremuloides trees. The results showed that Rs is mainly driven by soil temperature, to which it is positively correlated, that high levels of soil moisture have inhibiting effects, and that N has a negligible influence on total Rs, as well as on Ra. Further I found a negative response of Rh to high N availability, suggesting that microbial decomposition processes in the soil are inhibited by the presence of N. The contribution of Ra to Rs was of 37% on average.

Water, sediment and soil physicochemical interactions in freshwater, brackish and saline systems

The physicochemical interactions between water, sediment and soil deeply influence the formation and development of the ecosystem. In this research, different freshwater, brackish and saline subaqueous environments of Northern Italy were chosen as study area to investigate the physicochemical processes which occur at the interface between water and sediments, as well as the effects of soil submergence on ecosystem development. In the freshwater system of the Reno river basin, the main purpose was to define the heavy metals hazard in water and sediments of natural and artificial water courses. Heavy metals partitioning and speciation allowed to assess the environmental risk linked to the critical action of dredging canal sediments, for the maintenance of the hydraulic safety of plain lands. In addition, some bioremediation techniques were experimented for protecting sediments from heavy metals contamination, and for giving an answer to the problem of sediments management. In the brackish system of S. Vitale park, the development of hydromorphic and subaqueous soils was investigated. The study of soil profiles highlighted the presence of a soil continuum among pedons subjected to different saturation degrees. This investigation allowed to the identification of both morphological and physicochemical indicators, which characterize the formation of subaqueous soils and describe the soil hydromorphism in transitional soil systems. In the saline system of Grado lagoon, an ecosystem approach was used to define the role of water oscillation in soil characterization and plants colonization. This study highlighted the close relationship and the mutual influence of soil submergence and aeration, tide oscillation and vegetation cover, on the soil development. In view of climate change, this study contribute to understand and suppose how soil and landscape could evolve. However, a complete evaluation of hydromorphic soil functionality will be achieved only involving physiological and biochemical expertise in these kind of studies.

Relating the physicochemical characteristics and dispersion of multiwalled carbon nanotubes in different suspension media to their oxidative reactivity in vitro and inflammation in vivo

Reactive oxygen species (ROS) production is important in the toxicity of pathogenic particles such as fibres. We examined the oxidative potential of straight (50 microm and 10 microm) and tangled carbon nanotubes in a cell free assay, in vitro and in vivo using different dispersants. The cell free oxidative potential of tangled nanotubes was higher than for the straight fibres. In cultured macrophages tangled tubes exhibited significantly more ROS at 30 min, while straight tubes increased ROS at 4 h. ROS was significantly higher in bronchoalveolar lavage cells of animals instilled with tangled and 10 mum straight fibres, whereas the number of neutrophils increased only in animals treated with the long tubes. Addition of dispersants in the suspension media lead to enhanced ROS detection by entangled tubes in the cell-free system. Tangled fibres generated more ROS in a cell-free system and in cultured cells, while straight fibres generated a slower but more prolonged effect in animals.

Physicochemical characteristics and protist occurrence at stations sampled in 2007/2008 in the eastern Beaufort Sea

This study documents, for the first time, the abundance and species composition of protist assemblages in Arctic sea ice during the dark winter period. Lack of knowledge of sea-ice assemblages during the dark period has left questions about the retention and survival of protist species that initiate the ice algal bloom. Sea-ice and surface water samples were collected between December 27, 2007 and January 31, 2008 within the Cape Bathurst flaw lead, Canadian Beaufort Sea. Samples were analyzed for protist identification and counts, chlorophyll (chl) a, and total particulate carbon and nitrogen concentrations. Sea-ice chl a concentrations (max. 0.27 µg/l) and total protist abundances (max. 4 x 10**3 cells/l) were very low, indicating minimal retention of protists in the ice during winter. The diversity of winter ice protists (134 taxa) was comparable to spring ice assemblages. Pennate diatoms dominated the winter protist assemblage numerically (averaging 77% of total protist abundances), with Nitzschia frigida being the most abundant species. Only 56 taxa were identified in surface waters, where dinoflagellates were the dominant group. Our results indicate that differences in the timing of ice formation may have a greater impact on the abundance than structure of protist assemblages present in winter sea ice and at the onset of the spring ice algal bloom.

Physicochemical characteristics of chlorofluorohydrocarbon based inhalation aerosols

The aim of this work was to gain a better understanding of the physiochemical factors which affect the formulation of suspension inhalation aerosols. This has been attempted by applying the principles of colloid science to aerosol formulation. Both a drug system and a model colloid system have been used. The adsorption of six nonionic and cationic surfactants onto Spherisorb has been investigated. The results were analysed by calculating the area occupied by one adsorbed molecule at the surface and by comparing these values for each surfactant. The amount of each surfactant adsorbed was correlated with the number of sites on that surfactant molecule which could interact with the surface. The stability of suspensions, produced by both the model colloid Spherisorb, and by the drug isoprenaline sulphate, after adsorption of the surfactants, has been assessed by measuring settling times and rising times. The most stable suspensions were found to be those which had the greatest amounts of long chain fatty acid surfactant adsorbed on their surface. A comparison was made between the effective stabilising properties of Span 85 and oleic acid on various drug suspensions. It was found that Span 85 gave the most stable suspensions. Inhalation aerosol suspensions of isoprenaline sulphate were manufactured using the same surfactants used in the adsorption and suspension stability studies and were analysed by measuring the particle size distributions of the suspension and the emitted doses. The results were found to correlate with the adsorption and suspension stability studies and it was concluded that a deflocculated suspension was preferable to a flocculated suspension in inhalation aerosols provided that the drug density was less than the propellant density. The application of this work to preformulation studies was also discussed.

A case-study investigating the physicochemical characteristics that dictate the function of a liposomal adjuvant

A range of particulate delivery systems have been considered as vaccine adjuvants. Of these systems, liposomes offer a range of advantages including versatility and flexibility in design format and their ability to incorporate a range of immunomodulators and antigens. Here we briefly outline research, from within our laboratories, which focused on the systematic evaluation of cationic liposomes as vaccines adjuvants. Our aim was to identify physicochemical characteristics that correlate with vaccine efficacy, with particular consideration of the interlink between depot-forming action and immune responses. A variety of parameters were investigated and over a range of studies we have confirmed that cationic liposomes, based on dimethyldioctadecylammonium bromide and trehalose 6,6'-dibehenate formed a depot at the injection site, which stimulates recruitment of antigen presenting cells to the injection site and promotes strong humoral and cell-mediated immune responses. Physicochemical factors which promote a strong vaccine depot include the combination of a high cationic charge and electrostatic binding of the antigen to the liposome system and the use of lipids with high transition temperatures, which form rigid bilayer vesicles. Reduction in vesicle size of cationic vesicles did not promote enhanced drainage from the injection site. However, reducing the cationic nature through substitution of the cationic lipid for a neutral lipid, or by masking of the charge using PEGylation, resulted in a reduced depot formation and reduced Th1-type immune responses, while Th2-type responses were less influenced. These studies confirm that the physicochemical characteristics of particulate-based adjuvants play a key role in the modulation of immune responses.

Rainfall infiltration and soil hydrological characteristics below ancient forest, planted forest and grassland in a temperate northern climate

How rainfall infiltration rate and soil hydrological characteristics develop over time under forests of different ages in temperate regions is poorly understood. In this study, infiltration rate and soil hydrological characteristics were investigated under forests of different ages and under grassland. Soil hydraulic characteristics were measured at different scales under a 250-year-old grazed grassland (GL), 6-year-old (6yr) and 48-year-old (48yr) Scots pine (Pinus sylvestris) plantations, remnant 300-year-old individual Scots pine (OT) and a 4000-year-old Caledonian Forest (AF). In situ field-saturated hydraulic conductivity (Kfs) was measured, and visible root:soil area was estimated from soil pits. Macroporosity, pore structure and macropore connectivity were estimated from X-ray tomography of soil cores, and from water-release characteristics. At all scales, the median values for Kfs, root fraction, macroporosity and connectivity values tended to AF>OT>48yr>GL>6yr, indicating that infiltration rates and water storage increased with forest age. The remnant Caledonian Forest had a huge range of Kfs (12 to >4922mmh-1), with maximum Kfs values 7 to 15 times larger than those of 48-year-old Scots pine plantation, suggesting that undisturbed old forests, with high rainfall and minimal evapotranspiration in winter, may act as important areas for water storage and sinks for storm rainfall to infiltrate and transport to deeper soil layers via preferential flow. The importance of the development of soil hydrological characteristics under different aged forests is discussed.

Physicochemical characteristics of silica nanoparticles tailored for nanomedicine

Multifunktionella kiseldioxidnanopartiklar har en bred tillämpning inom nanomedicin. En attraktiv kombination är samtidig läkemedelstillförsel och spårning av nanopartiklarna, vilket är känt som ”teranostik”. Genom kontrollerad design av kiseldioxidnanopartiklarna kan terapi och diagnostik på detta sätt kombineras i samma partikel. För en lyckad användning av nanopartiklar inom nanomedicin måste deras fysikalisk-kemiska egenskaper vara välkontrollerade för att kunna förutspå deras beteende i biologiska system. I denna studie tillverkades kiseldioxidnanopartiklar med varierande storlek, form, yta och sammansättning med fokus på att utrusta nanopartiklarna med multifunktionalitet och på så sätt främja deras användning inom biomedicinska tillämpningar. Kiseldioxidnanopartiklar med sfäriska och stav-liknande former, porösa, icke-porösa och ihåliga strukturer tillverkades. De erhållna resultaten visade att nanopartiklarnas form har större inverkan på upptaget i celler jämfört med effekten av deras ytladdning. Nanopartiklarnas dispersionsstabilitet är en annan viktig aspekt för både diagnostiska och terapeutiska tillämpningar. Genom att ändra kiseldioxidnanopartiklarnas fysikalisk-kemiska ytegenskaper med ytfunktionalisering, bedömdes dispersionstabiliteten av nanopartiklarna. Nanopartiklarnas ytsammansättning justerades och skillnader i dispergerbarhet och dispersionsstabilitet undersöktes i biologiskt medium. Inom terapeutiska tillämpningar är målsökande läkemedelsfyllda nanopartiklar en lovande taktik som medför lägre läkemedelsdoser och minskar sidoeffekterna. I denna avhandling designades mesoporösa kiseldioxidnanopartiklar för användning som målsökande läkemedelsbärare. Dessa partiklar laddades med ett potentiellt anti-cancer läkemedel. En klart högre apoptotisk effekt kunde påvisas med de läkemedelsfyllda partiklarna jämfört med fri drog in vitro. En viktig egenskap för sådana multifunktionella nanopartiklar är också att kunna spåra dem under läkemedelsfrisättningen i biologisk miljö med olika bildåtergivningsmetoder. Detta kan uppnås genom att infoga en markör i kiseldioxidnätverket. Kiseldioxidnanopartiklarnas bildåtergivningsförmåga modifierades på olika sätt och inverkan på detekterbarheten analyserades med fluorescerande metoder och med magnetisk resonanstomografi. Denna avhandling lyfter fram de kritiska parametrarna vid syntes av kiseldioxidnanopartiklar för teranostiska tillämpningar. Olika metoder undersöktes för att erhålla skräddarsydda nanopartiklar. Detta arbete bidrar med en djup insikt i hur nanopartiklarnas fysikalisk-kemiska egenskaper påverkar deras beteende i biologisk miljö, och arbetet kan därför fungera som riktlinje för att designa säkra och effektiva nanomediciner.