Optimising protocol of acquisition and post-processing procedures in the assessment of coronary artery disease by computed tomography

Coronary artery disease (CAD) is currently one of the most prevalent diseases in the world population and calcium deposits in coronary arteries are one direct risk factor. These can be assessed by the calcium score (CS) application, available via a computed tomography (CT) scan, which gives an accurate indication of the development of the disease. However, the ionising radiation applied to patients is high. This study aimed to optimise the protocol acquisition in order to reduce the radiation dose and explain the flow of procedures to quantify CAD. The main differences in the clinical results, when automated or semiautomated post-processing is used, will be shown, and the epidemiology, imaging, risk factors and prognosis of the disease described. The software steps and the values that allow the risk of developingCADto be predicted will be presented. A64-row multidetector CT scan with dual source and two phantoms (pig hearts) were used to demonstrate the advantages and disadvantages of the Agatston method. The tube energy was balanced. Two measurements were obtained in each of the three experimental protocols (64, 128, 256 mAs). Considerable changes appeared between the values of CS relating to the protocol variation. The predefined standard protocol provided the lowest dose of radiation (0.43 mGy). This study found that the variation in the radiation dose between protocols, taking into consideration the dose control systems attached to the CT equipment and image quality, was not sufficient to justify changing the default protocol provided by the manufacturer.

Image quality and dose analysis in PA chest x-ray: comparison between AEC and manual mode acquisition using the 10 kVp rule

Purpose: To compare image quality and effective dose when the 10 kVp rule is applied with manual and AEC mode in PA chest X-ray. Methods and Materials: A total of 68 images (with and without lesions) were acquired of an anthropomorphic chest phantom in a Wolverson Arcoma X-ray unit. The images were evaluated against a reference image using image quality criteria and the 2 alternative forced choice (2 AFC) method by five radiographers. The effective dose was calculated using PCXMC software using the exposure parameters and DAP. The exposure index (lgM) was recorded. Results: Exposure time decreases considerably when applying the 10 kVp rule in manual mode (50%-28%) compared to AEC mode (36%-23%). Statistical differences for effective dose between several AEC modes were found (p=0.002). The effective dose is lower when using only the right AEC ionization chamber. Considering image quality, there are no statistical differences (p=0.348) between the different AEC modes for images with no lesions. Using a higher kVp value the lgM values will also increase. The lgM values showed significant statistical differences (p=0.000). The image quality scores did not present statistically significant differences (p=0.043) for the images with lesions when comparing manual with AEC modes. Conclusion: In general, the dose is lower in the manual mode. By using the right AEC ionising chamber the effective dose will be the lowest in comparison to other ionising chambers. The use of the 10 kVp rule did not affect the detectability of the lesions.

Utilização do software Scratch no ensino das ciências da natureza e da matemática com alunos portadores de dislexia

O estudo que apresentamos tem como objetivos de investigação contribuir para o desenvolvimento global das crianças com Necessidades Educativas Especiais, nomeadamente, portadoras de Dislexia, designadamente em aulas onde são lecionados conteúdos de Ciências da Natureza e de Matemática, e conceber um recurso didático apoiado nas TIC que seja adequado à utilização em sala de aula por alunos com dislexia. Neste sentido, o estudo foi orientado pelas seguintes questões de investigação: A utilização do Scratch é adequada e exequível no trabalho quotidiano de alunos portadores de Dislexia? e Em que medida o Scratch pode contribuir para um melhor envolvimento dos alunos portadores de Dislexia na realização das tarefas propostas? O presente trabalho segue uma metodologia de carácter qualitativo, centrando-se no estudo de caso. Tentou-se dar uma resposta à reduzida utilização do software Scratch no ensino das Ciências da Natureza e Matemática como instrumentos viáveis para uma aprendizagem de sucesso em alunos portadores de Dislexia. Este estudo foi aplicado a três alunos do 4º ano, com este diagnóstico, de um agrupamento de escolas do concelho de Viseu. Para dar resposta às questões de investigação supracitadas foram implementadas e projetadas duas atividades no software Scratch para serem desenvolvidas em duas situações formativas contextualizadas. O subdomínio que se pretendeu trabalhar foi “A importância da água para os seres vivos” articulando com o conteúdo dos volumes. Os dados foram recolhidos através da análise dos Programas Educativos Individuais de cada um dos alunos participantes, das entrevistas às docentes de Educação Especial, de gravações áudio, fotografias, trabalhos dos alunos e os registos da professora investigadora. Os resultados obtidos permitiram caracterizar o modo como os alunos, portadores de dislexia, se envolveram com o Scratch na aquisição de conhecimento. Permitiram ainda demonstrar aos professores que é possível construir atividades nesta ferramenta envolvendo conteúdos curriculares interdisciplinares.

User friendly knowledge acquisition system for medical devices actuation

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

Interacting software-agents to support a kind of expert supervision systems

Expert supervision systems are software applications specially designed to automate process monitoring. The goal is to reduce the dependency on human operators to assure the correct operation of a process including faulty situations. Construction of this kind of application involves an important task of design and development in order to represent and to manipulate process data and behaviour at different degrees of abstraction for interfacing with data acquisition systems connected to the process. This is an open problem that becomes more complex with the number of variables, parameters and relations to account for the complexity of the process. Multiple specialised modules tuned to solve simpler tasks that operate under a co-ordination provide a solution. A modular architecture based on concepts of software agents, taking advantage of the integration of diverse knowledge-based techniques, is proposed for this purpose. The components (software agents, communication mechanisms and perception/action mechanisms) are based on ICa (Intelligent Control architecture), software middleware supporting the build-up of applications with software agent features

Basic life support teaching in the second year pregraduate medical curriculum: quality of acquisition after 6 months

Purpose of the study: Basic life support (BLS) and automated externaldefibrillation (AED) represent important skills to be acquired duringpregraduate medical training. Since 3 years, our medical school hasintroduced a BLS-AED course (with certification) for all second yearmedical students. Few reports about quality and persistence over timeof BLS-AED learning are available to date in the medical literature.Comprehensive evaluation of students' acquired skills was performedat the end of the 2008 academic year, 6 month after certification.Materials and methods: The students (N = 142) were evaluated duringa 9 minutes «objective structured clinical examination» (OSCE) station.Out of a standardized scenario, they had to recognize a cardiac arrestsituation and start a resuscitation process. Their performance wererecorded on a PC using an Ambuman(TM) mannequin and the AmbuCPR software kit(TM) during a minimum of 8 cycles (30 compressions:2 ventilations each). BLS parameters were systematically checked. Nostudent-rater interactions were allowed during the whole evaluation.Results: Response of the victim was checked by 99% of the students(N = 140), 96% (N = 136) called for an ambulance and/or an AED. Openthe airway and check breathing were done by 96% (N = 137), 92% (N =132) gave 2 rescue breaths. Pulse was checked by 95% (N=135), 100%(N = 142) begun chest compression, 96% (N = 136) within 1 minute.Chest compression rate was 101 ± 18 per minute (mean ± SD), depthcompression 43 ± 8 mm, 97% (N = 138) respected a compressionventilationratio of 30:2.Conclusions: Quality of BLS skills acquisition is maintained during a6-month period after a BLS-AED certification. Main targets of 2005 AHAguidelines were well respected. This analysis represents one of thelargest evaluations of specific BLS teaching efficiency reported. Furtherfollow-up is needed to control the persistence of these skills during alonger time period and noteworthy at the end of the pregraduatemedical curriculum.

JULIDE: a software tool for 3D reconstruction and statistical analysis of autoradiographic mouse brain sections.

In this article we introduce JULIDE, a software toolkit developed to perform the 3D reconstruction, intensity normalization, volume standardization by 3D image registration and voxel-wise statistical analysis of autoradiographs of mouse brain sections. This software tool has been developed in the open-source ITK software framework and is freely available under a GPL license. The article presents the complete image processing chain from raw data acquisition to 3D statistical group analysis. Results of the group comparison in the context of a study on spatial learning are shown as an illustration of the data that can be obtained with this tool.

Free-and open source software for a course on network management: authoring and enactment of scripts based on collaborative learning strategies

This paper describes a Computer-Supported Collaborative Learning (CSCL) case study in engineering education carried out within the context of a network management course. The case study shows that the use of two computing tools developed by the authors and based on Free- and Open-Source Software (FOSS) provide significant educational benefits over traditional engineering pedagogical approaches in terms of both concepts and engineering competencies acquisition. First, the Collage authoring tool guides and supports the course teacher in the process of authoring computer-interpretable representations (using the IMS Learning Design standard notation) of effective collaborative pedagogical designs. Besides, the Gridcole system supports the enactment of that design by guiding the students throughout the prescribed sequence of learning activities. The paper introduces the goals and context of the case study, elaborates onhow Collage and Gridcole were employed, describes the applied evaluation methodology, anddiscusses the most significant findings derived from the case study.

Estudi de software lliure en diferents entorns

El software lliure està tenint últimament un pes cada cop més important en les empreses, però encara és el gran desconegut per a molta gent. Des de la seva creació als anys 80 fins ara, hi ha hagut un creixement exponencial de software lliure de gran qualitat, oferint eines per a tot tipus de necessitats, eines ofimàtiques, gestors de correu, sistemes de fitxer, sistemes operatius…. Tot aquest moviment no ha passat desapercebut per a molts usuaris i empreses, que s’han aprofitat d’ell per cobrir les seves necessitats. Pel que fa a les empreses, cada cop n’hi ha més que en petita o gran mesura, utilitzen el software lliure, ja sigui per el seu menor cost d’adquisició, o bé per la seva gran fiabilitat o per que és fàcilment adaptable o per no establir cap lligam tecnològic, en definitiva per tenir més llibertat. En el moment de la creació d’una nova empresa, on es parteix de zero en tota la tecnologia informàtica, és el moment menys costòs d’implementar l’arquitectura informàtica amb software lliure, és quan l’impacte que té sobre l’empresa, usuaris i clients és menor. En les empreses que ja tenen un sistema informàtic, caldrà establir un pla de migració, ja sigui total o parcial. La finalitat d’aquest projecte no és la de dir quin software és millor que l’altre o de dir quin s’ha d’instal•lar, sinó el de donar a conèixer el món del software lliure, mostrar part d’aquest software, fer alguna comparativa de software lliure amb software propietari, donant idees i un conjunt de solucions per a empreses, per què una empresa pugui agafar idees d’implementació d’algunes de les solucions informàtiques exposades o seguir algun dels consells proposats. Actualment ja hi ha moltes empreses que utilitzen software lliure. Algunes només n’utilitzen una petita part en les seves instal•lacions, ja que el fet de que una empresa funcioni al 100% amb software lliure, tot i que n’hi comença ha haver, de moment ho considero una mica arriscat, però que en poc temps, aquest fet serà cada cop més habitual.

Field Data Acquisition Technologies for Iowa Transportation Agencies, HR-366 August 1994

This report describes the results of the research project investigating the use of advanced field data acquisition technologies for lowa transponation agencies. The objectives of the research project were to (1) research and evaluate current data acquisition technologies for field data collection, manipulation, and reporting; (2) identify the current field data collection approach and the interest level in applying current technologies within Iowa transportation agencies; and (3) summarize findings, prioritize technology needs, and provide recommendations regarding suitable applications for future development. A steering committee consisting oretate, city, and county transportation officials provided guidance during this project. Technologies considered in this study included (1) data storage (bar coding, radio frequency identification, touch buttons, magnetic stripes, and video logging); (2) data recognition (voice recognition and optical character recognition); (3) field referencing systems (global positioning systems [GPS] and geographic information systems [GIs]); (4) data transmission (radio frequency data communications and electronic data interchange); and (5) portable computers (pen-based computers). The literature review revealed that many of these technologies could have useful applications in the transponation industry. A survey was developed to explain current data collection methods and identify the interest in using advanced field data collection technologies. Surveys were sent out to county and city engineers and state representatives responsible for certain programs (e.g., maintenance management and construction management). Results showed that almost all field data are collected using manual approaches and are hand-carried to the office where they are either entered into a computer or manually stored. A lack of standardization was apparent for the type of software applications used by each agency--even the types of forms used to manually collect data differed by agency. Furthermore, interest in using advanced field data collection technologies depended upon the technology, program (e.g.. pavement or sign management), and agency type (e.g., state, city, or county). The state and larger cities and counties seemed to be interested in using several of the technologies, whereas smaller agencies appeared to have very little interest in using advanced techniques to capture data. A more thorough analysis of the survey results is provided in the report. Recommendations are made to enhance the use of advanced field data acquisition technologies in Iowa transportation agencies: (1) Appoint a statewide task group to coordinate the effort to automate field data collection and reporting within the Iowa transportation agencies. Subgroups representing the cities, counties, and state should be formed with oversight provided by the statewide task group. (2) Educate employees so that they become familiar with the various field data acquisition technologies.

Basic life support teaching in the second year predraduate medical curriculum: quality of acquisition after 6 months

Purpose of the study: Basic life support (BLS) and automated externaldefibrillation (AED) represent important skills to be acquired duringpregraduate medical training. Since 3 years, our medical school hasintroduced a BLS-AED course (with certification) for all second yearmedical students. Few reports about quality and persistence over timeof BLS-AED learning are available to date in the medical literature.Comprehensive evaluation of students' acquired skills was performedat the end of the 2008 academic year, 6 month after certification.Materials and methods: The students (N = 142) were evaluated duringa 9 minutes «objective structured clinical examination» (OSCE) station.Out of a standardized scenario, they had to recognize a cardiac arrestsituation and start a resuscitation process. Their performance wererecorded on a PC using an Ambuman(TM) mannequin and the AmbuCPR software kit(TM) during a minimum of 8 cycles (30 compressions:2 ventilations each). BLS parameters were systematically checked. Nostudent-rater interactions were allowed during the whole evaluation.Results: Response of the victim was checked by 99% of the students(N = 140), 96% (N = 136) called for an ambulance and/or an AED. Openthe airway and check breathing were done by 96% (N = 137), 92% (N =132) gave 2 rescue breaths. Pulse was checked by 95% (N=135), 100%(N = 142) begun chest compression, 96% (N = 136) within 1 minute.Chest compression rate was 101 ± 18 per minute (mean ± SD), depthcompression 43 ± 8 mm, 97% (N = 138) respected a compressionventilationratio of 30:2.Conclusions: Quality of BLS skills acquisition is maintained during a6-month period after a BLS-AED certification. Main targets of 2005 AHAguidelines were well respected. This analysis represents one of thelargest evaluations of specific BLS teaching efficiency reported. Furtherfollow-up is needed to control the persistence of these skills during alonger time period and noteworthy at the end of the pregraduatemedical curriculum.

Automatic acquisition of Named Entities for Rule-Based Machine Translation

This paper proposes to enrich RBMTdictionaries with Named Entities(NEs) automatically acquired fromWikipedia. The method is appliedto the Apertium English-Spanishsystem and its performance comparedto that of Apertium with and withouthandtagged NEs. The system withautomatic NEs outperforms the onewithout NEs, while results vary whencompared to a system with handtaggedNEs (results are comparable forSpanish to English but slightly worstfor English to Spanish). Apart fromthat, adding automatic NEs contributesto decreasing the amount of unknownterms by more than 10%.

Evaluation of performance analysis software for Linux computing cluster

Tietokonejärjestelmän osien ja ohjelmistojen suorituskykymittauksista saadaan tietoa,jota voidaan käyttää suorituskyvyn parantamiseen ja laitteistohankintojen päätöksen tukena. Tässä työssä tutustutaan suorituskyvyn mittaamiseen ja mittausohjelmiin eli ns. benchmark-ohjelmistoihin. Työssä etsittiin ja arvioitiin eri tyyppisiä vapaasti saatavilla olevia benchmark-ohjelmia, jotka soveltuvat Linux-laskentaklusterin suorituskyvynanalysointiin. Benchmarkit ryhmiteltiin ja arvioitiin testaamalla niiden ominaisuuksia Linux-klusterissa. Työssä käsitellään myös mittausten tekemisen ja rinnakkaislaskennan haasteita. Benchmarkkeja löytyi moneen tarkoitukseen ja ne osoittautuivat laadultaan ja laajuudeltaan vaihteleviksi. Niitä on myös koottu ohjelmistopaketeiksi, jotta laitteiston suorituskyvystä saisi laajemman kuvan kuin mitä yhdellä ohjelmalla on mahdollista saada. Olennaista on ymmärtää nopeus, jolla dataa saadaan siirretyä prosessorille keskusmuistista, levyjärjestelmistä ja toisista laskentasolmuista. Tyypillinen benchmark-ohjelma sisältää paljon laskentaa tarvitsevan matemaattisen algoritmin, jota käytetään tieteellisissä ohjelmistoissa. Benchmarkista riippuen tulosten ymmärtäminen ja hyödyntäminen voi olla haasteellista.

Learning 2.0 : concepts and experiences with social networks and software

Peer-reviewed

Estudi de software lliure en diferents entorns

El software lliure està tenint últimament un pes cada cop més important en les empreses, però encara és el gran desconegut per a molta gent. Des de la seva creació als anys 80 fins ara, hi ha hagut un creixement exponencial de software lliure de gran qualitat, oferint eines per a tot tipus de necessitats, eines ofimàtiques, gestors de correu, sistemes de fitxer, sistemes operatius…. Tot aquest moviment no ha passat desapercebut per a molts usuaris i empreses, que s’han aprofitat d’ell per cobrir les seves necessitats. Pel que fa a les empreses, cada cop n’hi ha més que en petita o gran mesura, utilitzen el software lliure, ja sigui per el seu menor cost d’adquisició, o bé per la seva gran fiabilitat o per que és fàcilment adaptable o per no establir cap lligam tecnològic, en definitiva per tenir més llibertat. En el moment de la creació d’una nova empresa, on es parteix de zero en tota la tecnologia informàtica, és el moment menys costòs d’implementar l’arquitectura informàtica amb software lliure, és quan l’impacte que té sobre l’empresa, usuaris i clients és menor. En les empreses que ja tenen un sistema informàtic, caldrà establir un pla de migració, ja sigui total o parcial. La finalitat d’aquest projecte no és la de dir quin software és millor que l’altre o de dir quin s’ha d’instal•lar, sinó el de donar a conèixer el món del software lliure, mostrar part d’aquest software, fer alguna comparativa de software lliure amb software propietari, donant idees i un conjunt de solucions per a empreses, per què una empresa pugui agafar idees d’implementació d’algunes de les solucions informàtiques exposades o seguir algun dels consells proposats. Actualment ja hi ha moltes empreses que utilitzen software lliure. Algunes només n’utilitzen una petita part en les seves instal•lacions, ja que el fet de que una empresa funcioni al 100% amb software lliure, tot i que n’hi comença ha haver, de moment ho considero una mica arriscat, però que en poc temps, aquest fet serà cada cop més habitual.