Wood properties and knot occlusion of plantation grown Eucalyptus dunnii and Corymbia citriodora subsp. variegata in a pruning and thinning experiment.

A 2 × 2 factorial combination of thinned or unthinned, and pruned or unpruned 11-year-old Eucalyptus dunnii (DWG) and 12-year-old Corymbia citriodora subsp. variegata (CCV) was destructively sampled to provide 60 trees in total per species. Two 1.4 m long billets were cut from each tree and were rotary veneered in a spindleless lathe down to a 45 mm diameter core to expose knots which were classified as either alive, partially occluded or fully occluded. Non-destructive evaluation of a wider range of thinning treatments available in these trials was undertaken with Pilodyn and Fakopp tools. Disc samples were also taken for basic density and modulus of elasticity. Differences between treatments for all wood property assessments were generally small and not significantly different.Thinning and pruning had little effect on the stem diameter growth required to achieve occlusion, therefore occlusion would be more rapid after thinning due to more rapid stem diameter growth. The difference between the treatments of greatest management interest, thinned and pruned (T&P) and unthinned and unpruned (UT&UP) were small. The production of higher value clear wood produced after all knots had occluded, measured as the average stem diameter growth over occlusion of the three outermost knots, was approximately 2 centimetres diameter. Two of the treatments can be ruled out as viable management alternatives: (i) the effect of thinning without pruning (T&UP) is clear, leading to a large inner core of stem wood containing knots (large knotty core diameter) and (ii) pruning without thinning (UT&P) results in a small knotty core diameter, however the tree and therefore log diameters are also small.

Numerical simulation of Richtmyer-Meshkov instability

The compressible Navier-Stokes equations discretized with a fourth order accurate compact finite difference scheme with group velocity control are used to simulate the Richtmyer-Meshkov (R-M) instability problem produced by cylindrical shock-cylindrical material interface with shock Mach number Ms = 1.2 and density ratio 1:20 (interior density/outer density). Effect of shock refraction, reflection, interaction of the reflected shock with the material interface, and effect of initial perturbation modes on R-M instability are investigated numerically. It is noted that the shock refraction is a main physical mechanism of the initial phase changing of the material surface. The multiple interactions of the reflected shock from the origin with the interface and the R-M instability near the material interface are the reason for formation of the spike-bubble structures. Different viscosities lead to different spike-bubble structure characteristics. The vortex pairing phenomenon is found in the initial double mode simulation. The mode interaction is the main factor of small structures production near the interface.

Evaluación de la eficacia de la técnica de floating system para la producción de radicchio rosso var. di Verona en condiciones controladas

La técnica de producción en Floating system constituye una alternativa económica y veloz de producción en hidroponia. Este sistema permite obtener hojas de vegetales de pequeño tamaño “Baby leaf” listas para consumir (IV Gama), cuyo consumo a nivel mundial muestra una tendencia creciente. Dicha técnica no se encuentra aún muy difundida para la producción de radicchio rosso. El objetivo de este trabajo fue evaluar el efecto del tamaño de celda, del substrato y de la técnica de floating system sobre la producción de radicchio. Los ensayos se realizaron en cámara a 25 ºC con un fotoperíodo de 16 hs de luz y 8 de oscuridad y con una intensidad de luz de 10 000 Lux. Se utilizó un diseño experimental factorial totalmente aleatorizado, con 5 repeticiones y 3 factores, cuyos niveles fueron: 1) Tamaño de celda, (T), con 3 niveles: grande, mediano y pequeño, 2) Técnica de producción, (F), con 2 niveles: floating system y sistema convencional, 3) Sustrato, (S), con 2 niveles: vermiculita y mezcla. Se analizaron las siguientes variables: 1) peso fresco, 2) peso seco, 3) largo de planta, 4) número de hojas y 5) área foliar. Los resultados obtenidos resultan alentadores respecto del empleo de la técnica de floating system. Para la obtención de plántulas con calidad de IV Gama resulta más conveniente el empleo de celdas de 80 cm3 y sustrato mezcla.

Performance of District Industries Centers in Kerala : An Application of augmented solow Model

This thesis "Entitled performance of district industries centres in kerala :An application of augmented solow model.The first chapter deals with evolution of approaches for promoting small scale production and the growth of small scale industries in india.the developing countries face the problems like sluggish growth capital shortages high levels of unemployment,enoromous rural-urban economic disparities regional inequalities increasing concentration of capital and chronic difficulities in the export sector.Review of literature and methodology of the study are presented in the second chapter. In the third chapter an attempt has been made to make an in-depth study of the emergence and growth of district of district industries centres.In the chapter four an attempt was made to study the organisational structure of DICs functions and responsibilities assigned to the functional managers and performance of the functionaries.

Performance of District Industries Centres in Kerala

This thesis "Entitled performance of district industries centres in kerala :An application of augmented solow model.The first chapter deals with evolution of approaches for promoting small scale production and the growth of small scale industries in india.the developing countries face the problems like sluggish growth capital shortages high levels of unemployment,enoromous rural-urban economic disparities regional inequalities increasing concentration of capital and chronic difficulities in the export sector.Review of literature and methodology of the study are presented in the second chapter. In the third chapter an attempt has been made to make an in-depth study of the emergence and growth of district of district industries centres.In the chapter four an attempt was made to study the organisational structure of DICs functions and responsibilities assigned to the functional managers and performance of the functionaries.

Knubbved istället för vanlig ved? : slutrapport från projekt Styckeved för småskalig eldning

Chunkwood is a wood fuel with a fuel particle length between 50 and 150 mm, i.e. with a sizebetween wood chips and conventional firewood. Chunkwood can be produced and handled asrational as wood chips and can dry during storage like conventional firewood. This is known sincelong. In project Smallwood for small scale heating we have investigated if chunkwood can be usedin a small scale as a fuel for heating detached houses in conventional firewood boilers as well asautomatically fed to a boiler in a similar way as wood chips. We have also compared completesystems for small scale production, distribution and heating with chunkwood, wood chips andconventional firewood.Storage of chunkwood produced for testing small scale boilers confirmed that chunkwood can dryduring storage at least as good as conventional firewood. Tests in different boilers for detachedhomes showed that chunkwood can be used in conventional firewood boilers as well as in automaticallyfed wood chips boilers. Chunkwood can be delivered to the customer to the same or lowercost as wood chips and firewood, but need much less handling by the customer than conventionalfirewood. However, if chunkwood is used in a conventional firewood boiler, it needs some handlingby shovel and wheelbarrow. Technical development of handling from the storage to the boiler isneeded. In a somewhat larger scale, e.g. a boiler for apartment blocks or a small district heatingsystem, chunkwood should be very interesting as a replacement of fuel pellets or fuel briquettes. Itwould be interesting with some projects, which in this scale demonstrates the whole system fromthe forest to heat.

Estudo de adsorvente obtido de terras diatomáceas para remoção de metais pesados em águas produzidas: processamento, caracterização e dinâmica em leito fixo

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry

Qualidade e maturação de tangerinas e seus híbridos em São Paulo

A ampliação da oferta de tangerinas tanto no mercado interno como no externo é limitada pela grande quantidade de sementes nos frutos das principais cultivares, danos na casca resultante de doenças e pela pequena produção nas épocas mais quentes do ano. O presente trabalho teve como objetivo caracterizar a qualidade dos frutos e a época de maturação de 46 tangerinas e híbridos em condições de campo na Estação Experimental de Citricultura de Bebedouro (EECB), Bebedouro-SP. As variedades de tangerinas e híbridos (tangores e tangelos) foram introduzidas de bancos de germoplasma da Itália, Portugal, Espanha e França, e a pesquisa desenvolveu-se durante os anos agrícolas de 2001/2002 e 2002/2003. Foram avaliadas características externas de qualidade, como altura e diâmetro dos frutos, massa dos frutos, facilidade em descascar com a mão e características internas como: número de sementes, teor de sólidos solúveis totais, acidez total titulável, rendimento em suco, ratio e rendimento em polpa. Duas cultivares apresentaram frutos de boa qualidade e época de maturação precoce, podendo ser disponibilizadas no mercado, num período de escassez deste tipo de citros, e serem alternativas à tangerina-'Cravo'. Quatro cultivares que apresentaram boa qualidade e maturação mediana poderão ser alternativas à 'Poncã'.

Elaboração de um queijo análogo ao pecorino romano produzido com leite de cabra e coalhada congelados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fragmentos de um modelo: pequenas lavouras de café e acumulação de capitais. Franca/São Paulo 1890-1914

Este artigo versa sobre a importância da pequena cafeicultura no complexo cafeeiro entre 1890 e 1914. Discutimos aqui as relações de trabalho, as formas de financiamento e o modo como a pequena propriedade se insere neste universo. Utilizamos como fontes prioritárias os contratos de trabalho que envolviam a formação e/ou o trato de cafeeiros e as escrituras de dívidas hipotecárias, ambas lavradas nos Livros Cartoriais, fontes estas ainda não trabalhadas pela historiografia de forma mais sistemática. Desviamos nosso olhar para uma região marcada predominantemente pelas pequenas e médias fazendas produtoras de café, observando a dinâmica da acumulação em um período de expansão e de crise da cafeicultura.

Metodologia experimental para avaliação de custos de produção e utilização de biodiesel: estudo de caso de quatro ésteres metílicos e óleo diesel comercial

Considerando que o Brasil detém uma vasta gama de matérias-primas para produção de biodiesel, e também que há a possibilidade de produção em pequena escala, prima-se por estudos de cunho econômico a partir de metodologias de fácil execução. O objetivo do trabalho foi demonstrar uma metodologia e sua aplicação para avaliação dos custos inseridos dentro do processo produtivo e de utilização do biodiesel. A metodologia foi aplicada a biodieseis originários de óleo de soja, girassol, frango e sebo bovino, dos quais se avaliaram economicamente os custos fixos e variáveis para conversão química dos óleos e gorduras em ésteres metílicos, em uma planta de produção experimental. Os custos de produção para cada uma das quatro citadas são distintos em função do valor inicial por litro de cada uma. Também fora avaliado o custo específico e o consumo específico de cada um dos biodieseis, a fim de determinar a diferença em relação ao óleo diesel comercial. No estudo de caso, os resultados mostraram vantagens para o óleo diesel, tanto no custo quanto no consumo. Comparando-se os biodieseis, o de sebo bovino apresentou-se com o menor custo de produção e o menor consumo.

Sedimentation rates of tripton in Jurumirim Reservoir (São Paulo, Brazil)

Sedimentation rates of particulate material and some physicochemical parameters of water were determined in October, January, April and July 1990-91 at seven stations in the Jurumirim Reservoir (São Paulo, Brazil), three located in the Paranapanema arm, three in the Taquari arm and one near the dam. Higher sedimentation rates of tripton were found in the Paranapanema arm, followed by those from the Taquari arm and the dam. Suspended matter (2.5-48.7 mg · 1-1) and chlorophyll-a (0.7-8.1 mg · m-3) concentrations in the Paranapanema arm were in general higher resulting in lower water transparency (0.3-1.7m) than in the Taquari arm. Temporal and spatial variations in the tripton sedimentation rates were mainly influenced by allochthonous input at the stations near the river mouth. The settling fluxes at station near the dam of the reservoir were affected rather by a small autochthonous production (65 g C ass m-2 ;yr-1), indicated by a higher organic content (64-87%). Therefore, sedimentation rates measured by bottom traps were affected by sediment ressuspension especially at isothermal conditions. With respect to sedimentation, the riverine, the transition and the lacustrine zones commonly found in reservoires could be distinguished. The extent of the riverine zone in each arm of the Jurumirim Reservoir depends on the seasonal change of allochthonous input.

Crédito e pequena cafeicultura no oeste paulista: Franca/SP 1890-1914

This article turns on the importance of the small coffee production in the coffee complex economy between 1890 and 1914. We argue here the relations of work, the forms of financing and the way as the small coffee production inserts itself in this universe. We use as priority sources the employment contracts that involved the formation and/or the treatment of coffee trees and the Writes of mortgage debts, both recorded in Notarial Books, documents not used by historiography in a systematical way. We turns our look for a region marked predominantly for small and the middle producing farms of coffee, observing the dynamics of the accumulation in a period of expansion and crisis of the coffee economy.

A Dinâmica agrária do município de Ortigueira(PR) e a reprodução social dos produtores familiares: uma análise das comunidades rurais de Pinhalzinho e Vila Rica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

As usinas hidrelétricas e seus impactos: os aspectos socioambientais e econômicos do reassentamento rural de Rosana-Euclides da Cunha Paulista

Pós-graduação em Geografia - FCT