MEASUREMENT OF SOLID SLURRY FLOW VIA CORRELATION OF ELECTROMAGNETIC FLOW METER, ELECTRICAL RESISTANCE TOMOGRAPHY AND MECHANISTIC MODELLING

The study presented here was carried out to obtain the actual solids flow rate by the combination of electrical resistance tomography and electromagnetic flow meter. A new in-situ measurement method based on measurements of the Electromagnetic Flow Meters (EFM) and Electrical Resistance Tomography (ERT) to study the flow rates of individual phases in a vertical flow was proposed. The study was based on laboratory experiments that were carried out with a 50 mm vertical flow rig for a number of sand concentrations and different mixture velocities. A range of sand slurries with median particle size from 212 mu m to 355 mu m was tested. The solid concentration by volume covered was 5% and 15%, and the corresponding density of 5% was 1078 kg/m(3) and of 15% was 1238 kg/m(3). The flow velocity was between 1.5 m/s and 3.0 m/s. A total of 6 experimental tests were conducted. The equivalent liquid model was adopted to validate in-situ volumetric solids fraction and calculate the slip velocity. The results show that the ERT technique can be used in conjunction with an electromagnetic flow meter as a way of measurement of slurry flow rate in a vertical pipe flow. However it should be emphasized that the EFM results must be treated with reservation when the flow pattern at the EFM mounting position is a non-homogenous flow. The flow rate obtained by the EFM should be corrected considering the slip velocity and the flow pattern.

The survey on growth and survival rate parameters with slurry and comparison by common method

This project was on “Study of Slurry, as an enrichment compound, on growth and survival parameters of Rutilus firisii kutum Kamensky 1901 larva and compare with routine condition according to hypothesis that use of Slurry, fertile organic compound, to increase the efficiency of survivorship and growth of Rutilus firisii and in other hand adaptation of natural food was performance.” The object of this project is to compare growth of Rutilus firisii and in usual condition and the condition of use Slurry The experiences performed in culture and propagation center Dr. Yousefpour decent (Associan of Dr. Beheshti culture and propagation) in Siahkal village, 32 Km far from southeast, in North of Iran. In this plan, three different treatments and related these nine pools , in 1.7 hec area (in same condition) were determined so that the density of storage was 1.7 million/hec larva. In this research at first treatment m we use slurry as enrichment compound during larval within a period of 13 days, and it used all the days of during larval in second treatment. Then the result of this study compared to control treatment. The results have shown the level of this study compared to control treatment. The results have shown the level of survivorship in pools were nutrition by slurry was 1.7 million times or twice than pools were nutrition with usual concentrate. In addition, growth coefficient such as daily weight growing (DWG) index, daily length growth (DLG), specific growth ratio (SGR) were measured in this case. All of these parameters in slurry treatment were shown noticeable enhancement in first treatment Thereof in the first week there was significant difference (P<0.001) between the average of length and weight in first week , and in the second week there was a significant difference (P<0.05) between them.

Experimental investigation on TBAB clathrate hydrate slurry flows in a horizontal tube: Forced convective heat transfer behaviors

Tetra-n-butyl-ammonium bromide (TBAB) clathrate hydrate slurry (CHS) is one kind of secondary refrigerants, which is promising to be applied into air-conditioning or latent-heat transportation systems as a thermal storage or cold carrying medium for energy saving. It is a solid-liquid two phase mixture which is easy to produce and has high latent heat and good fluidity. In this paper, the heat transfer characteristics of TBAB slurry were investigated in a horizontal stainless steel tube under different solid mass fractions and flow velocities with constant heat flux. One velocity region of weakened heat transfer was found. Moreover, TBAB CHS was treated as a kind of Bingham fluids, and the influences of the solid particles, flow velocity and types of flow on the forced convective heat transfer coefficients of TBAB CHS were investigated. At last, criterial correlations of Nusselt number for laminar and turbulent flows in the form of power function were summarized, and the error with experimental results was within 20%.

Experimental study on flow characters of CH3CCl2F hydrate slurry

The flow behaviors of CH3CCl2F hydrate slurry with volume concentration of 10-70% were studied in a new built flow loop with a diameter of 42.0 mm and length of 30.0 m. Morphologies of the fluids from slurrylike hydrates to slushlike hydrates with increasing of hydrate volume concentration in pipeline were observed. Pressure drops in pipeline also were studied and an exceptional pressure transition zone with hydrate volume concentration between 30% and 40% was found for the first time, which can be used as a notation to judge if the pipeline runs safely or not. Fanning friction factors of the hydrate slurries with all hydrate contents tend to constants between 0.38 and 0.5, which depend on the volume concentration in slurries, when the velocity reaches 1.5 m/s. A simple relation to estimate the pressure drop of hydrate slurry in pipeline was presented and verified. Experimental results were compared to the estimated results, which showed a good agreement.