Effects of opening in the cross girders of the flat bottom rail wagons to the load transferring mechanisms when used as road bridge deck

A Flat Bed Rail Wagon (FBRW) has been proposed as an alternative solution for replacing bridges on low traffic volume roads. The subject matter for this paper is to investigate the impediment to load transfer from cross girders to main girder, through visually identifiable structural flaws. Namely, the effect of having large openings at close proximity to the connection of the main girder to the cross girder of a FBRW was examined. It was clear that openings locally reduce the section modulus of the secondary members; however it was unclear how these reductions would affect the load transfer to the main girder. The results are presented through modeling grillage action for which the loads applied onto the FBRW were distributed through cross girders to the main girder.

From the bottom-up : redesigning the international legal response to anthropogenic climate change

The design of the Kyoto Protocol renders it incapable of effectively responding to the problem of anthropogenic climate change. Therefore, this article explores the opportunity to construct a new, principled legal approach to respond to climate change that is premised on nationally derived legal responses. To do so, this article considers the theoretical foundation of the international legal response to climate change – Hardin's "The Tragedy of the Commons‟ – and the systemic design faults of the Kyoto Protocol. This article also suggests four principles – a judicious mix of legal instruments, flexibility, intrinsic legal coherence, and quantifiable and achievable targets for the reduction of greenhouse gas intensity – that are necessary to guide the creation of a nationally derived legal response to climate change. This approach is intended to provide the catalyst for new bilateral and multilateral arrangements that can, with the passing of time, generate sufficient momentum to drive the creation of a new and effective cooperative international legal framework to mitigate anthropogenic climate change.

An improved boundary layer scaling with ramp heating on a sloping plate

A scaling analysis for the natural convection boundary layer adjacent to an inclined semi-infinite plate subject to a non-instantaneous heating in the form of an imposed wall temperature which increases linearly up to a prescribed steady value over a prescribed time is reported. The development of the boundary layer flow from start-up to a steady-state has been described based on scaling analyses and verified by numerical simulations. The analysis reveals that, if the period of temperature growth on the wall is sufficiently long, the boundary layer reaches a quasi-steady mode before the growth of the temperature is completed. In this mode the thermal boundary layer at first grows in thickness and then contracts with increasing time. However, if the imposed wall temperature growth period is sufficiently short, the boundary layer develops differently, but after the wall temperature growth is completed, the boundary layer develops as though the startup had been instantaneous. The steady state values of the boundary layer for both cases are ultimately the same.

ACE research vignette 014 : how does networking contribute to the bottom line? - The value of purpose-driven networking

This series of research vignettes is aimed at sharing current and interesting research findings from our team and other international researchers. In this vignette, Dr Martie-Louise Verreynne from the University of Queensland Business School summaries the findings from a paper written in conjunction with Sarel Gronum and Tim Kastelle from the UQ Business School that examined if networking really contributes to small firms' bottom line. Their findings show that unless networks are used for productive means, efforts to cultivate and maintain them may be wasteful.

How the environment affects opportunity recognition by entrepreneurs at the bottom of the pyramid

There is an army of bottom of the pyramid entrepreneurs (BOPE) who have the potential to transform developing economies, if they can identify and exploit business opportunities. BOPE could have unidentified resources that could lead to the recognition of radical new opportunities. This study paper asks how environmental factors and identification of resources affect Opportunity Recognition by BOP entrepreneurs in developing economies. To investigate this research question we conduct a literature review and plan semi-structured interviews of existing and nascent entrepreneurs in the largest and arguably the poorest country in Africa, the Democratic Republic of the Congo. In this paper we review the context of BOPE and describe the methodology we will use to gather and analyse data. Finally, we describe our access to suitable respondents for this study and how it will be conducted.

Micro-credit is not sufficient for the success of micro-enterprises at the bottom of the pyramid

This study examines the factors affecting the successful provision of micro-credit to people at the bottom of the pyramid and discusses the activities required to support entrepreneurial activities in a peri-urban African setting. The findings enable us to better understand why micro-credit, though useful, is only part of the solution, in a setting characterized by extreme resource constraints with an institutional fabric lacking the infrastructure that assists market development. We depict the crafting of new entrepreneurial activity as an ongoing process and present an emerging research agenda for future developments.

A Triple Bottom Line Planning Tool for Measuring Sustainability : A Systems Approach to Sustainability Using the Australian Dairy Industry as a Case Study

Sustainability is a key driver for decisions in the management and future development of organisations and industries. However, quantifying and comparing sustainability across the triple bottom line (TBL) of economy, environment and social impact, has been problematic. There is a need for a tool which can measure the complex interactions within and between the environmental, economic and social systems which affect the sustainability of an industry in a transparent, consistent and comparable way. The authors acknowledge that there are currently numerous ways in which sustainability is measured and multiple methodologies in how these measurement tools were designed. The purpose of this book is to showcase how Bayesian network modelling can be used to identify and measure environmental, economic and social sustainability variables and to understand their impact on and interaction with each other. This book introduces the Sustainability Scorecard, and describes it through a case study on sustainability of the Australian dairy industry. This study was conducted in collaboration with the Australian dairy industry.

Building the youth sector from the bottom up : case studies from the Queensland CPLAN Initiative 2012-2013

As part of YANQ's decentralisation across the state, YANQ have set up 10 Networks across Queensland, with Facilitators based in each of the regions. We encourage you to get in contact with your local Facilitator if you would like to have input on Workforce Development or youth policy issues. CPLANs aim to create an ongoing and sustainable structure across ten regions in Queensland to support a consistent focus on: ⋅ Policy issues relevant to young people; and ⋅ Workforce development strategies for the youth sector from a local, regional and state perspective. The ten CPLANs fall under the existing structure of YANQ and utlise and lever off the comprehensive network of youth inter-­‐agencies and networks across the state. The ten CPLANs are made up of representatives from the youth sector in each region who have an interest in contributing to policy development and workforce issues.

Complexity Development Theory and enterprise development at the bottom of the pyramid

In 2001 45% (2.7 billion) of the world’s population of approximately 6.1 billion lived in ‘moderate poverty’ on less than US $ 2 per person per day (World Population Summary, 2012). In the last 60 years there have been many theories attempting to explain development, why some countries have the fastest growth in history, while others stagnate and so far no way has been found to explain the differences. Traditional views imply that development is the aggregation of successes from multiple individual business enterprises, but this ignores the interactions between and among institutions, organisations and individuals in the economy, which can often have unpredictable effects. Complexity Development Theory proposes that by viewing development as an emergent property of society, we can help create better development programs at the organisational, institutional and national levels. This paper asks how the principals of CAS can be used to develop CDT principals used to develop and operate development programs at the bottom of the pyramid in developing economies. To investigate this research question we conduct a literature review to define and describe CDT and create propositions for testing. We illustrate these propositions using a case study of an Asset Based Community Development (ABCD) Program for existing and nascent entrepreneurs in the Democratic Republic of the Congo (DRC). We found evidence that all the principals of CDT were related to the characteristics of CAS. If this is the case, development programs will be able to select which CAS needed to test these propositions.

Natural convection due to differential heating of inclined walls and heat source placed on bottom wall of an attic shaped space

Numerical investigation of free convection heat transfer in an attic shaped enclosure with differentially heated two inclined walls and filled with air is performed in this study. The left inclined surface is uniformly heated whereas the right inclined surface is uniformly cooled. There is a heat source placed on the right side of the bottom surface. Rest of the bottom surface is kept as adiabatic. Finite volume based commercial software ANSYS 15 (Fluent) is used to solve the governing equations. Dependency of various flow parameters of fluid flow and heat transfer is analyzed including Rayleigh number, Ra ranging from 103 to 106, heater size from 0.2 to 0.6, heater position from 0.3 to 0.7 and aspect ratio from 0.2 to 1.0 with a fixed Prandtl number of 0.72. Outcomes have been reported in terms of temperature and stream function contours and local Nusselt number for various Ra, heater size, heater position, and aspect ratio. Grid sensitivity analysis is performed and numerically obtained results have been compared with those results available in the literature and found good agreement.

Renewable energy distribution in public spaces: Analyzing the case of Ballast Point Park in Sydney, using a triple bottom line approach

As cities are rapidly developing new interventions against climate change, embedding renewable energy in public spaces is an important strategy. However, most interventions primarily include environmental sustainability while neglecting the social and economic interrelationships of electricity production. Although there is a growing interest in sustainability within environmental design and landscape architecture, public spaces are still awaiting viable energy-conscious design and assessment interventions. The purpose of this paper is to investigate this issue in a renowned public space—Ballast Point Park in Sydney—using a triple bottom line (TBL) case study approach. The emerging factors and relationships of each component of TBL, within the context of public open space, are identified and discussed. With specific focus on renewable energy distribution in and around Ballast Point Park, the paper concludes with a general design framework, which conceptualizes an optimal distribution of onsite electricity produced from renewable sources embedded in public open spaces.