Normal shock boundary layer control with various vortex generator geometries

Various vortex generators which include ramp, split-ramp and a new hybrid concept "ramped-vane" are investigated under normal shock conditions with a diffuser at Mach number of 1.3. The dimensions of the computational domain were designed using Reynolds Average Navier-Stokes studies to be representative of the flow in an external-compression supersonic inlet. Using this flow geometry, various vortex generator concepts were studied with Implicit Large Eddy Simulation. In general, the ramped-vane provided increased vorticity compared to the other devices and reduced the separation length downstream of the device centerline. In addition, the size, edge gap and streamwise position respect to the shock were studied for the ramped-vane and it was found that a height of about half the boundary thickness and a large trailing edge gap yielded a fully attached flow downstream of the device. This ramped-vane also provided the largest reduction in the turbulent kinetic energy and pressure fluctuations. Additional benefits include negligible drag while the reductions in boundary layer displacement thickness and shape factor were seen compared to other devices. © 2011 Elsevier Ltd.

Estudo do fator de forma de área em reparo com chapa colada em tubulações com furo

Este trabalho tem por finalidade o estudo da resistência à pressão hidrostática do reparo realizado com chapa de aço de baixo carbono, colada com adesivo estrutural à base de epóxi em tubulações de aço com furo. Tubulações de parede fina, sob pressão interna, a tensão na direção longitudinal é a metade da tensão circunferencial do tubo, deste modo, o fator de forma da área do reparo, ou seja, a variação das dimensões da chapa nas direções longitudinal e circunferencial do tubo foi investigado. A influência da força de falha do reparo, quando varia-se a dimensão da chapa nas direções citadas, foram analisadas estatisticamente utilizando-se um planejamento fatorial de experimentos. Altos valores de resistência hidrostática do reparo foram encontrados (em torno de 240 bar) quando comparados com as pressões normais de trabalho (em torno de 70 bar) de uma tubulação similar as utilizadas nos testes. Os resultados da pressão de falha do reparo dos 10 grupos analisados apresentaram desvios padrão pequenos, menor que 12 %, demonstrando a eficiência dos procedimentos adotados na confecção do reparo. Os estudos demonstram a não existência de um fator de forma na resistência do reparo devido a variação nas dimensões da chapa nas direções longitudinal e circunferencial do tubo bem como a alta influência na resistência do reparo quando aumenta a área da chapa. Os resultados apontam para o desenvolvimento de um novo procedimento de reparo de contingência.

VGs for a normal SBLI with a downstream diffuser

New types of vortex generators for boundary layer control were investigated experimentally in a flow field which contains a Mach 1.4 normal Shockwave followed by a subsonic diffuser. A parametric study of device height and distance upstream of the normal shock was undertaken with two novel devices: ramped-vanes and split-ramps. Flowfield diagnostics included high-speed Schlieren, oil flow visualization, and pitot-static pressure measurements. A number of flowfield parameters including flow separation, pressure recovery, centerline incompressible boundary layer shape factor, and shock stability were analyzed and compared to the baseline. All configurations tested yielded an elimination of centerline flow separation with the presence of the vortex generators. However, the devices also tended to increase the three-dimensionality of the flow with increased side-wall interaction. When located 25δo upstream of the normal shock, the largest ramped-vane device (whose height was about 0.75 the incoming uncontrolled boundary layer thickness, δo) yielded the smallest centerline incompressible shape factor and the least streamwise oscillations of the normal shock. However, additional studies are needed to better understand the corner interaction effects, which are substantial. © 2010 by the American Institute of Aeronautics and Astronautics, Inc.

Flow physics of a normal-hole bled supersonic turbulent boundary layer

An experimental study on normal hole bleed in a supersonic turbulent boundary layer has been conducted. A combination of LDV, Schlieren imagery and oil flow visualization were used to provide a better understanding of the three-dimensional flow field surrounding a supersonic bleed array. Experiments were performed at Mach numbers of 1.8 and 2.5, while previously published results at Mach numbers of 1.3 and 1.5 were also incorporated. The bleed system was capable of removing up to approximately 10% of the incoming boundary layer through a tunnel-spanning array of discrete holes with diameters the same order of magnitude of boundary layer displacement thickness. Inspection of boundary layer profiles downstream of the bleed region indicates that vorticity generated by the discrete holes can have a substantial influence on changes to the boundary layer shape factor and skin friction coefficient, through modification of the lower 20% of the boundary layer. This vorticity was visualized through oil-flow visualization, and LDV measurements, showing the development of two vortices off each bleed hole, and corresponding upwash and downwash regions with far-reaching three dimensional effects. © 2013 by J. M. Oorebeek and H. Babinsky.

Self-organisation in the assembly of gels from mixtures of different dendritic peptide building blocks

This paper investigates dendritic peptides capable of assembling into nanostructured gels, and explores the effect on self-assembly of mixing different molecular building blocks. Thermal measurements, small angle Xray scattering (SAXS) and circular dichroism (CD) spectroscopy are used to probe these materials on macroscopic, nanoscopic and molecular length scales. The results from these investigations demonstrate that in this case, systems with different "size" and "chirality" factors can self-organise, whilst systems with different "shape" factors cannot. The "size" and "chirality" factors are directly connected with the molecular information programmed into the dendritic peptides, whilst the shape factor depends on the group linking these peptides together-this is consistent with molecular recognition hydrogen bond pathways between the peptidic building blocks controlling the ability of these systems to self-recognise. These results demonstrate that mixtures of relatively complex peptides, with only subtle differences on the molecular scale, can self-organise into nanoscale structures, an important step in the spontaneous assembly of ordered systems from complex mixtures.

Validation of three new measure-correlate-predict models for the long-term prospection of the wind resource

The estimation of the long-term wind resource at a prospective site based on a relatively short on-site measurement campaign is an indispensable task in the development of a commercial wind farm. The typical industry approach is based on the measure-correlate-predict �MCP� method where a relational model between the site wind velocity data and the data obtained from a suitable reference site is built from concurrent records. In a subsequent step, a long-term prediction for the prospective site is obtained from a combination of the relational model and the historic reference data. In the present paper, a systematic study is presented where three new MCP models, together with two published reference models �a simple linear regression and the variance ratio method�, have been evaluated based on concurrent synthetic wind speed time series for two sites, simulating the prospective and the reference site. The synthetic method has the advantage of generating time series with the desired statistical properties, including Weibull scale and shape factors, required to evaluate the five methods under all plausible conditions. In this work, first a systematic discussion of the statistical fundamentals behind MCP methods is provided and three new models, one based on a nonlinear regression and two �termed kernel methods� derived from the use of conditional probability density functions, are proposed. All models are evaluated by using five metrics under a wide range of values of the correlation coefficient, the Weibull scale, and the Weibull shape factor. Only one of all models, a kernel method based on bivariate Weibull probability functions, is capable of accurately predicting all performance metrics studied.

Morphometry of megakaryocytes in the liver of New Zealand White rabbits during intrauterine and postnatal development

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphology of alumina: a comparison between infrared spectroscopy and X-ray diffractometry

Morphology of three samples of alumina are investigated. Infrared spectra are analysed by use of their morphology through the theory of average dielectric constant. Crystal shape is obtained from X-ray diffraction patterns by reflection intensity ratio. In the case of electron scanning microscopy, shape factor was obtained by an average axial ratio of the particles. Comparison of results show that there is agreement among these techniques and infrared spectra can be used to determine the morphology of alumina particles from 2.7 to 10 mu m, even for heterogeneous samples. (C) 1999 Elsevier B.V. B.V. All rights reserved.

Histology and morphometry of the testes of adult domestic cats (Felis catus)

Testicles of 30 mongrel cats were analyzed histologically and morphometrically, divided into three groups: G1 (1-2 years old), G2 (over 2 and up to 4 years old) and G3 (over 4 and up to 6 years old). After orchiectomy and histopathology, the morphometric parameters studied were: thickness of the tunica albuginea (72 mu m) and seminiferous epithelium (77.19 mu m), perimeter (53.81; 90.57 mu m), (54.80; 101.07 mu m); area (174.23; 494.55 mu m(2)), (176.68; 629.70 mu m(2)); maximum diameter (14.94; 28.02 mu m), (14.76; 31.66 mu m); minimum diameter (13.25; 21.92 mu m), (13.30; 24.52 mu m); and shape factor (index for regularity of the format) (1.36; 1.36), (1.39; 1.35) of the nucleus and cytoplasm of spermatogonia and Leydig cells, respectively. The results can be used for comparative studies and contribute knowledge concerning the height of the seminiferous epithelium, thickness of the tunica albuginea and size of spermatogonia and Leydig cells.

Análise dos parâmetros morfométricos da bacia do Rio Preto, Serra do Espinhaço (Minas Gerais, Brasil)

The Rio Preto Hydrographic Basin (RPHB) is located in the North-central portion of the state of Minas Gerais, Brazil, 30 km ENE of the city of Diamantina. The sources of the stream of that name are found in the Rio Preto State Park, which has an area of 10,755 hectares. The total area, perimeter, extension, and axial length of the RPHB, as well as other morphometric characteristics, with emphasis on shape indexes, were obtained with the help of the ArcGis 9.2 program. The cartographic data were taken from digitalized topographic charts in a scale of 1:100,000 of the Brazilian Geographical Institute (IBGE). The measured drainage area is of 389.3 km2 and the perimeter is 136.9 km. Due to structural influence, the shape of the RPHB is irrgular and elongated, with drainage developed in a dendritic and parallel pattern. Those characteristics were checked by means of the compaxity coefficient and the shape factor. The first one was estimated in 1.94, what implies that the basin is not subject to fast flooding in years with normal precipitation. The high degree of fluvial downcutting of the basin is confirmed by the fact that it is a 5th order basin, it presents a significant branching rate and a medium drainage density.

Control of flexural waves on a beam using distributed vibration neutralisers

This paper is concerned with the use of distributed vibration neutralisers to control the transmission of flexural waves on a beam. Of particular interest is an array of beam-like neutralisers and a continuous plate-like neutraliser. General expressions for wave transmission and reflection metrics either side of the distributed neutralisers are derived. Based on transmission efficiency, the characteristics of multiple neutralisers are investigated in terms of the minimum transmission efficiency, the normalised bandwidth and the shape factor, allowing optimisation of their performance. Analytical results show that the band-stop property of the neutraliser array depends on various factors, including the neutraliser damping, mass, separation distance in the array and the moment arm of each neutraliser. Moreover, it is found that the particular attachment configuration of an uncoupled forcemoment-type neutraliser can be used to improve their overall performance. It is also shown that in the limit of many neutralisers in the array, the performance tends to that of a continuous neutraliser. © 2011 Elsevier Ltd.

Avaliação morfométrica dos hepatócitos de ratos diabéticos tratados com neem (azadirachta indica a. juss) e estreptozootocina 6 ch

The effects of extracts from Azadirachta indica A. Juss and streptozotocin, in extreme high dilutions in dinamized systems, on hepatocyte morphometry of rats with diabetes mellitus induced by streptozotocin were evaluated. Some parameters presented significant differences among the experimental groups, but the effect of treatments to make better or worse the consequences of diabetes mellitus on liver was not detected using only the hepatocyte morphometry. The morphometric analysis evidenced that the white control group presented the highest mean values for nucleus and cytoplasm parameters, with the exception of the nuclear shape factor. However, this situation did not imply the diabetes mellitus was the cause of drastic reduction in these values, since the literature describes lower measurements for rats from the control group (non-diabetic rats).

Desenvolvimento de metodologias automáticas para obtenção do parâmetro de forma ótimo para o método RPIM

Neste trabalho, são propostas metodologias para otimização do parâmetro de forma local c do método RPIM (Radial Point Interpolation Method). Com as técnicas apresentadas, é possível reduzir problemas com inversão de matrizes comuns em métodos sem malha e, também, garantir um maior grau de liberdade e precisão para a utilização da técnica, já que se torna possível uma definição semi-automática dos fatores de forma mais adequados para cada domínio de suporte. Além disso, é apresentado um algoritmo baseado no Line Sweep para a geração eficiente dos domínios de suporte.

Modelagem da área foliar de duas cultivares de amendoim em função das dimensões lineares dos folíolos

The purpose of this study was to determine a shape factor to estimate area of leaflets of two peanut cultivars (IAC TATU ST, IAC RUNNER 886). Correlation studies were conducted involving real leaf area (Sf) and leaf length (C), maximum leaf width (L) and the product between C and L. For each cultivar was determined a form factor (f) by means of regression analysis between the product of the length by the width and the actual area of leaves and the correlation between leaf area estimated by the correction factor and direct measurement. All evaluated models (linear, exponential or geometric) provided good estimates of leaf area (above 87%). Linear models had the best fit, passing or not through the origin. From a practical viewpoint, it is suggested to use the linear model involving the C and L product, using a linear coefficient equal to zero, with values of factor f equal to 0.7111 and 0.7266 for IAC RUNNER 886 and IAC TATU ST, respectively. The method of dimensions is feasible for the estimation of leaf area for both peanut cultivars, for showing good r(2) values (0.97), with errors below 3%, even when used with independent data.

Toxoplasmosis: morphological and morphometric evaluation of spinal cord neurons from nonsymptomatic seropositive dogs

The aim of this work was to analyze the neuron morphology and morphometry of cervical, thoracic and lumbar areas of nonsymptomatic seropositive dogs’ spinal cord for toxoplasmosis. Twenty indefinite-breed adult dogs were used; ten dogs were healthy, with negative serology for toxoplasmosis, and were used as the control group (group 1), and ten dogs were nonsymptomatic but seropositive for toxoplasmosis (group 2). After the microtomy, with interval of 100 micrometers (µm), the histological 5-µm-thick cuts were dyed by hematoxylin-eosin and Masson's trichrome techniques. The glass slides were analyzed under light microscope to examine the neuron morphology. The parameters considered for the morphometric analysis were area, perimeter, maximum diameter, minimum diameter and shape factor of cytoplasm and nucleus of neuron. The results were statistically analyzed by Student’s t test at 5% probability level. The morphological characteristics between the two groups were similar and according to literature. The morphometric results showed that there were changes in neurons size and structure, and increase and loss of star shape were noticed in seropositive animals. The results suggest that the neurons of these dogs, yet nonsymptomatic, can have lost their conductor function.