Establishment of native ecosystems after mining - Australian experience across diverse biogeographic zones

The Australian minerals industry, which is dominated by coal, gold, bauxite, iron ore, base metals and mineral sand operations, is widely scattered across a continent which has a wide range of climatic zones ranging from moist temperate in the south through hot deserts in the centre to moist tropical in the north. There is an emphasis at most mines on establishing native ecosystems after mining, and technologies have had to be developed to ensure successful establishment and stability of these ecosystems under often adverse climatic conditions. This paper describes some of the innovative practices used to establish native ecosystenms in bauxite, mineral sand and coal operations across diverse biogeographic zones. Additionally, brief reference is made to an ecosystem function analysis, which has been developed to assess the success of establishment of these ecosystems. (C) 2001 Elsevier Science B.V. All rights reserved.

Delineation of sulphide ore-zones by borehole radar tomography at Hellyer Mine, Australia

Velocity and absorption tomograms are the two most common forms of presentation of radar tomographic data. However, mining personnel, geophysicists included, are often unfamiliar with radar velocity and absorption. In this paper, general formulae are introduced, relating velocity and attenuation coefficient to conductivity and dielectric constant. The formulae are valid for lossy media as well as high-resistivity materials. The transformation of velocity and absorption to conductivity and dielectric constant is illustrated via application of the formulae to radar tomograms from the Hellyer zinc-lead-silver mine, Tasmania, Australia. The resulting conductivity and dielectric constant tomograms constructed at Hellyer demonstrated the potential of radar tomography to delineate sulphide ore zones. (C) 2001 Elsevier Science B.V. All rights reserved.

Drosophilidae (Diptera) of Australia's Northern Territory: Ecology and biogeography

The drosophilid fauna is well documented in eastern Australia but is poorly known in other parts of the continent. This paper summarises what is known of this fauna in the Northern Territory (NT), and includes results from banana trapping in the humid and arid zones. The 42 recorded species include species that breed in fruit, fungi and/or flowers, and a larval predator of scale insects. Drosophilids occur in all three major climate zones (humid, semiarid and arid) but predominate in the humid zone. Banana-attracted species in the humid zone (wet-dry tropics) were common in all sampled habitats: urban, rainforest and open woodland. They included predominantly urban and/or rainforest species. Of the species collected in open woodland, some are likely to be breeding there, whereas others may have been intercepted during movement across the area. The semiarid fauna is a depauperate version of that found in the humid region. Only three species have been recorded in the arid region: an endemic arid specialist, and two cosmopolitan species (D. simulans and D. melanogaster ) in urban Alice Springs. Overall, the NT drosophilid fauna represents a depauperate version of that found in eastern Australia, probably because of climatic factors and natural barriers to range expansion. There is little evidence of regional endemism, with probably only one (and at most three) species endemic to the NT, and no evidence of independent, natural dispersion from nearby Indonesia.

Location of innervation zones of sternocleidomastoid and scalene muscles - a basis for clinical and research electromyography applications

Objectives: Advances in surface electromyography (sEMG) techniques provide a clear indication that refinement of electrode location relative to innervation zones (IZ) is required in order to optimise the accuracy, relevance and repeatability of the sEMG signals. The aim of this study was to identify the IZ for the sternocleidomastoid and anterior scalene muscles to provide guidelines for electrode positioning for future clinical and research applications. Methods: Eleven volunteer subjects participated in this study. Myoelectric signals were detected from the sternal and clavicular heads of the stemocleidomastoid and the anterior scalene muscles bilaterally using a linear array of 8 electrodes during isometric cervical flexion contractions. The signals were reviewed and the IZ(s) were identified, marked on the subjects' skin and measurements were obtained relative to selected anatomical landmarks. Results: The position of the IZ lay consistently around the mid-point or in the superior portion of the muscles studied. Conclusions: Results suggest that electrodes should be positioned over the lower portion of the muscle and not the mid-point, which has been commonly used in previous studies. Recommendations for sensor placement on these muscles should assist investigators and clinicians to ensure improved validity in future sEMG applications. (C) 2002 Elsevier Science Ireland Ltd. All rights reserved.

Stress correlation function evolution in lattice solid elasto-dynamic models of shear and fracture zones and earthquake prediction

It has been argued that power-law time-to-failure fits for cumulative Benioff strain and an evolution in size-frequency statistics in the lead-up to large earthquakes are evidence that the crust behaves as a Critical Point (CP) system. If so, intermediate-term earthquake prediction is possible. However, this hypothesis has not been proven. If the crust does behave as a CP system, stress correlation lengths should grow in the lead-up to large events through the action of small to moderate ruptures and drop sharply once a large event occurs. However this evolution in stress correlation lengths cannot be observed directly. Here we show, using the lattice solid model to describe discontinuous elasto-dynamic systems subjected to shear and compression, that it is for possible correlation lengths to exhibit CP-type evolution. In the case of a granular system subjected to shear, this evolution occurs in the lead-up to the largest event and is accompanied by an increasing rate of moderate-sized events and power-law acceleration of Benioff strain release. In the case of an intact sample system subjected to compression, the evolution occurs only after a mature fracture system has developed. The results support the existence of a physical mechanism for intermediate-term earthquake forecasting and suggest this mechanism is fault-system dependent. This offers an explanation of why accelerating Benioff strain release is not observed prior to all large earthquakes. The results prove the existence of an underlying evolution in discontinuous elasto-dynamic, systems which is capable of providing a basis for forecasting catastrophic failure and earthquakes.

Simulation of the influence of rate- and state-dependent friction on the macroscopic behavior of complex fault zones with the lattice solid model

In order to understand the earthquake nucleation process, we need to understand the effective frictional behavior of faults with complex geometry and fault gouge zones. One important aspect of this is the interaction between the friction law governing the behavior of the fault on the microscopic level and the resulting macroscopic behavior of the fault zone. Numerical simulations offer a possibility to investigate the behavior of faults on many different scales and thus provide a means to gain insight into fault zone dynamics on scales which are not accessible to laboratory experiments. Numerical experiments have been performed to investigate the influence of the geometric configuration of faults with a rate- and state-dependent friction at the particle contacts on the effective frictional behavior of these faults. The numerical experiments are designed to be similar to laboratory experiments by DIETERICH and KILGORE (1994) in which a slide-hold-slide cycle was performed between two blocks of material and the resulting peak friction was plotted vs. holding time. Simulations with a flat fault without a fault gouge have been performed to verify the implementation. These have shown close agreement with comparable laboratory experiments. The simulations performed with a fault containing fault gouge have demonstrated a strong dependence of the critical slip distance D-c on the roughness of the fault surfaces and are in qualitative agreement with laboratory experiments.

Winter intervention against Aedes aegypti (Diptera : Culicidae) larvae in subterranean habitats slows surface recolonization in summer

At semiarid Charters Towers, north Queensland, Australia, the importance of Aedes aegypti (L.) in wells was assessed in relation to the colonization of surface habitats during the wet season. From April to July 1999, 10 wells (five positive for Ae. aegypti) were monitored to assess their status and larvae population numbers therein. All surface containers located within a 100 m radius of each well were removed, treated with s-methoprene or sealed to prevent the utilization of these containers by mosquitoes. These inner cores were surrounded by outer zones for a further 100 m in which surface containers were left untreated but all subterranean habitats were treated. Ovitraps were monitored monthly in the inner cores for 36 wk from August 1999 to April 2000 and differences in the proportions of ovitraps positive for Ae. aegypti and Ochlerotatus notoscriptus (Skuse) were analyzed by logistic regression. Analysis of the proportions of ovitraps positive for Ae. aegypti near positive wells indicated significantly greater colonization from November to March (the wet season), compared with those situated near Ae. aegypti negative wells. As Oc. notoscriptus were not produced from subterranean sites, comparisons of the proportions of ovitraps positive for Oc. notoscriptus in positive and negative inner cores provided an indication of the relative productivity of the uncontrolled surface containers in the outer zones. Differences in the utililization of ovitraps by Oc. notoscriptus among positive and negative cores were observed during only one month (March), when oviposition was greater in ovitraps in the negative cores, compared with the positive cores. Best subsets linear regression analysis of the proportion of ovitraps positive for Ae. aegypti against meteorological variables (rainfall, mean wind speed, mean relative humidity, mean minimum, and maximum temperature) during the week of ovitrapping indicated that minimum temperature and wind speed accounted for 63.4% of the variability. This study confirms that for semiarid towns such as Charters Towers, the practice of treating a relatively small number of key subterranean habitats during winter will significantly affect Ae. aegypti recolonization of surface container habitats during summer, the period of greatest risk for dengue.

Simulation supplements field studies to determine no-till dryland corn population recommendations for semiarid western Nebraska

In a 2-yr multiple-site field study conducted in western Nebraska during 1999 and 2000, optimum dryland corn (Zea mays L.) population varied from less than 1.7 to more than 5.6 plants m(-2), depending largely on available water resources. The objective of this study was to use a modeling approach to investigate corn population recommendations for a wide range of seasonal variation. A corn growth simulation model (APSIM-maize) was coupled to long-term sequences of historical climatic data from western Nebraska to provide probabilistic estimates of dryland yield for a range of corn populations. Simulated populations ranged from 2 to 5 plants m(-2). Simulations began with one of three levels of available soil water at planting, either 80, 160, or 240 mm in the surface 1.5 m of a loam soil. Gross margins were maximized at 3 plants m(-2) when starting available water was 160 or 240 mm, and the expected probability of a financial loss at this population was reduced from about 10% at 160 mm to 0% at 240 mm. When starting available water was 80 mm, average gross margins were less than $15 ha(-1), and risk of financial loss exceeded 40%. Median yields were greatest when starting available soil water was 240 mm. However, perhaps the greater benefit of additional soil water at planting was reduction in the risk of making a financial loss. Dryland corn growers in western Nebraska are advised to use a population of 3 plants m(-2) as a base recommendation.

Prevalence and determinants of child undernutrition and stunting in semiarid region of Brazil

OBJECTIVE : To analyze the evolution in the prevalence and determinants of malnutrition in children in the semiarid region of Brazil. METHODS : Data were collected from two cross-sectional population-based household surveys that used the same methodology. Clustering sampling was used to collect data from 8,000 families in Ceará, Northeastern Brazil, for the years 1987 and 2007. Acute undernutrition was calculated as weight/age < -2 standard deviation (SD); stunting as height/age < -2 SD; wasting as weight/height < -2 SD. Data on biological and sociodemographic determinants were analyzed using hierarchical multivariate analyses based on a theoretical model. RESULTS : A sample of 4,513 and 1,533 children under three years of age, in 1987 and 2007, respectively, were included in the analyses. The prevalence of acute malnutrition was reduced by 60.0%, from 12.6% in 1987 to 4.7% in 2007, while prevalence of stunting was reduced by 50.0%, from 27.0% in 1987 to 13.0% in 2007. Prevalence of wasting changed little in the period. In 1987, socioeconomic and biological characteristics (family income, mother’s education, toilet and tap water availability, children’s medical consultation and hospitalization, age, sex and birth weight) were significantly associated with undernutrition, stunting and wasting. In 2007, the determinants of malnutrition were restricted to biological characteristics (age, sex and birth weight). Only one socioeconomic characteristic, toilet availability, remained associated with stunting. CONCLUSIONS : Socioeconomic development, along with health interventions, may have contributed to improvements in children’s nutritional status. Birth weight, especially extremely low weight (< 1,500 g), appears as the most important risk factor for early childhood malnutrition.

Design and construction of tunnels in zones subjected to high convergences

The economic development of a region depends on the speed that people and goods can travel. The reduction of people and goods travel time can be achieved by planning smooth road layouts, which are obtained by crossing natural obstacles such as hills, by tunneling at great depths, and allowing the reduction of the road alignment length. The stress state in rock masses at such depths, either because of the overburden or due to the tectonic conditions of the rock mass induces high convergences of the tunnel walls. These high convergence values are incompatible with the supports structural performance installed in the excavation stabilization. In this article it is intended to evaluate and analyze some of the solutions already implemented in several similar geological and geotechnical situations, in order to establish a methodological principle for the design of the tunnels included in a highway section under construction in the region influenced by the Himalayas, in the state of Himachal Pradesh (India) and referenced by "four laning of Kiratpur to Ner Chowk section".

Culture-dependent characterization of cyanobacterial diversity in the intertidal zones of the Portuguese coast: A polyphasic study

Cyanobacteria are important primary producers, and many are able to fix atmospheric nitrogen playing a key role in the marine environment. However, not much is known about the diversity of cyanobacteria in Portuguese marine waters. This paper describes the diversity of 60 strains isolated from benthic habitats in 9 sites (intertidal zones) on the Portuguese South and West coasts. The strains were characterized by a morphological study (light and electron microscopy) and by a molecular characterization (partial 16S rRNA, nifH, nifK, mcyA, mcyE/ndaF, sxtI genes). The morphological analyses revealed 35 morphotypes (15 genera and 16 species) belonging to 4 cyanobacterial Orders/Subsections. The dominant groups among the isolates were the Oscillatoriales. There is a broad congruence between morphological and molecular assignments. The 16S rRNA gene sequences of 9 strains have less than 97% similarity compared to the sequences in the databases, revealing novel cyanobacterial diversity. Phylogenetic analysis, based on partial 16S rRNA gene sequences showed at least 12 clusters. One-third of the isolates are potential N2-fixers, as they exhibit heterocysts or the presence of nif genes was demonstrated by PCR. Additionally, no conventional freshwater toxins genes were detected by PCR screening.

Delineating environmental groundwater vulnerability and protection zones mapping in fractured rock masses

Hard‐rock watersheds commonly exhibit complex geological bedrock and morphological features. Hydromineral resources have relevant economic value for the thermal spas industry. The present study aims to develop a groundwater vulnerability approach in Caldas da Cavaca hydromineral system (Aguiar da Beira, Central Portugal) which has a thermal tradition that dates back to the late 19th century, and contribute to a better understanding of the hydrogeological conceptual site model. In this work different layers were overlaid, generating several thematic maps to arrive at an integrated framework of several key‐sectors in Caldas da Cavaca site. Thus, to accomplish a comprehensive analysis and conceptualization of the site, a multi‐technical approach was used, such as, field and laboratory techniques, where several data was collected, like geotectonics, hydrology and hydrogeology, hydrogeomorphology, hydrogeophysical and hydrogeomechanical zoning aiming the application of the so‐called DISCO method. All these techniques were successfully performed and a groundwater vulnerability to contamination assessment, based on GOD‐S, DRASTIC‐Fm, SINTACS, SI and DISCO indexes methodology, was delineated. Geographical Information Systems (GIS) technology was on the basis to organise and integrate the geodatabases and to produce all the thematic maps. This multi‐technical approach highlights the importance of groundwater vulnerability to contamination mapping as a tool to support hydrogeological conceptualisation, contributing to better decision‐making of water resources management and sustainability.