Blast loading of masonry infills: testing and simulation

This work intends to present a newly developed test setup for dynamic out-of-plane loading using underWater Blast Wave Generators (WBWG) as loading source. Underwater blasting operations have been, during the last decades, subject of research and development of maritime blasting operations (including torpedo studies), aquarium tests for the measurement of blasting energy of industrial explosives and confined underwater blast wave generators. WBWG allow a wide range for the produced blast impulse and surface area distribution. It also avoids the generation of high velocity fragments and reduces atmospheric sound wave. A first objective of this work is to study the behavior of masonry infill walls subjected to blast loading. Three different masonry walls are to be studied, namely unreinforced masonry infill walls and two different reinforcement solutions. These solutions have been studied previously for seismic action mitigation. Subsequently, the walls will be simulated using an explicit finite element code for validation and parametric studies. Finally, a tool to help designers to make informed decisions on the use of infills under blast loading will be presented.

Estudo da cabeceira da Sé do Porto

Dissertação de mestrado integrado em Engenharia Civil

Modelli semplificati per valutazione di vulnerabilità sismica di strutture in muratura

L'obiettivo della tesi è stato quello di indagare il complesso problema della vulnerabilità sismica dei ponte in muratura ad arco utilizzando modelli semplificati. Dopo una descrizione dei materiali da costruzione impiegati nella realizzazione e dei principali elementi dei un ponti in muratura, si è indirizzato lo studio di un ponte ad arco situato nel comune di San Marcello Pistoiese. Viene mostrato un modello numerico che permette di descrivere il comportamento strutturale del ponte sotto azione sismica e di valutare la capacità di carico del ponte sottoposto ad una azione trasversale. In un secondo momento viene descritta la realizzazione di un modello in scala del ponte, che è stato sottoposto a prove distruttive effettuate per valutare la capacità di carico del ponte rispetto ad un ipotetica azione orizzontale. Si è cercato poi di inquadrare il problema in un modello teorico che faccia riferimento all'analisi limite. Esso descrive un cinematismo di collasso a telaio che prende spunto dal quadro fessurativo del modello in muratura. Infine sono stati presentati modelli FEM numerici in ordine di complessità crescente, cercando di inquadrare il comportamento meccanico del prototipo del ponte. Tre tipi di modelli sono rappresentati: un telaio incernierato alle estremità costituito da elementi beam con resistenza alla flessione . Il secondo tipo è costituito da una reticolare equivalente che mima lo schema del ponte ed è formato solo da bielle. Infine, il terzo tipo cerca di descrivere l'intero modello con elementi tridimensionali.

Aplicaciones estructurales de la guadua (Guadua angustifolia Kunth): Proyecto de estructura modular multifuncional en Colombia

La Guadua (Guadua angustifolia Kunth) es una de las especies forestales más características de Colombia. Perteneciente a la familia del bambú, ésta planta nativa de Colombia usada en la construcción permite una reducción de costos, garantizados, entre otras ventajas, por sus propiedades físico-mecánicas de flexibilidad, resistencia, dureza, efecto climatizado y sismo resistencia. En el proyecto se plantea inicialmente un estudio de la Guadua como material estructural. Se estudiará su anatomía, sus propiedades físicas y mecánicas así como la normativa existente que rige su uso en construcción y por último se darán algunos ejemplos en los que se puede comprobar su uso en la actualidad. Posteriormente se procederá al desarrollo del proyecto cuya finalidad es el diseño de una estructura modular multifuncional que se necesita para llevarla a cabo en un proyecto de cooperación localizado en Neiva (Colombia). El proyecto incluirá todos los documentos necesarios para un trabajo de estas características: memoria, pliego de condiciones técnicas, presupuesto, planos, así como el Estudio de Seguridad y Salud Laboral. Como solución a las necesidades planteadas en el proyecto de cooperación, se realizará el diseño de dos estructuras modulares cuya finalidad sea las de uso como oficina y como almacén. Se aplicará para su cálculo el CTE cómo normativa de construcción, pero apoyándose en algunos parámetros en la NSR-10, estableciendo una comparativa posterior entre ambas normativas. Debido a la importancia de la acción sísmica en Colombia se comprobará la resistencia sísmica del módulo diseñado según el “Manual de Construcción, evaluación y rehabilitación sismo resistente de viviendas de mampostería” creado por la Asociación Colombiana de Ingeniería Sísmica. Basándose en este manual se definirán los tipos de uniones más favorables sísmicamente de los módulos con el diseño de una cercha auxiliar necesaria según el tipo de unión. ABSTRACT PROJECT: Structural applications of the guadua (Guadua angustifolia Kunth). Project of modular multifunctional structure in Colombia Guadua (Guadua angustifolia Kunth) is one of the forest species more characteristics of Colombia. Pertaining to the family of the bamboo, this one native plant of Colombia used in the construction allows a reduction of costs, guaranteed, among others advantages, by its physic mechanical properties of flexibility, resistance, hardness, climatic effect and earthquake resistance. The project initially considers a study of the Guadua as structural material. We will study its anatomy, its physical and mechanical properties as well as the existing norm that governs its use in construction and finally some examples will be provided in which its actual use can be verified. Later on, we will proceed with the development of the project which purpose is the design of a multifunctional modular structure required to in a project of cooperation located in Neiva (Colombia). The project will include all the necessary documents for a work of these characteristics: memory, technical specifications, budget, drawings, as well as the Security and Labor Health Study. In order to satisfy the needs raised in the cooperation project, we will undertake the design of two modular structures with the purpose to be used as office and warehouse. The construction normative CTE will be applied for its calculation, but some parameters will be based in the NSR-10, establishing a comparison between both norms. Due to the importance of the seismic action in Colombia, the seismic resistance of the module will be verified according to the “Manual of Construction, evaluation and rehabilitation resistant earthquake of rubblework houses” created by the Colombian Association of Seismic Engineering,. We will also use this Manual to define the types of unions more favorable from seismic point of view, designing the required auxiliary segments according to the type of union.

A computer program for bridge retrofitting

This paper summarizes the work developed in order to establish a framework for seismic retrofitting of bridges. In this context, the first objetive is to find a numerical model to evaluate the damage induced in a structure, under seismic action, as an index of its vulnerability. The model used has the adventage that is based on concepts of fracture mechanics and concentrated plasticity. As a result, the work is based on basic principles. The performance of this model is being evaluated. Some results of the computer program developed for this purpose are shown.

Vulnerability analysis of RC buildings with wide beams located in moderate seismicity regions

A significant number of short-to-mid height RC buildings with wide beams have been constructed in areas of moderate seismicity of Spain, mainly for housing and administrative use. The buildings have a framed structure with one-way slabs; the wide beams constitute the distinctive characteristic, their depth being equal to that of the rest of the slab, thus providing a flat lower surface, convenient for construction and the layout of facilities. Seismic behavior in the direction of the wide beams appears to be deficient because of: (i) low lateral strength, mainly because of the small effective depth of the beams, (ii) inherent low ductility of the wide beams, generated by high amount of reinforcement, (iii) the big strut compressive forces developed inside the column-beam connections due to the low height of the beams, and (iv) the fact that the wide beams are wider than the columns, meaning that the contribution of the outer zones to the resistance of the beam-column joints is unreliable because there is no torsion reinforcement. In the orthogonal direction, the behavior is worse since the only members of the slabs that contribute to the lateral resistance are the joists and the façade beams. Moreover, these buildings were designed with codes that did not include ductility requirements and required only a low lateral resistance; indeed, in many cases, seismic action was not considered at all. Consequently, the seismic capacity of these structures is not reliable. The objective of this research is to assess numerically this capability, whereas further research will aim to propose retrofit strategies. The research approach consists of: (i) selecting a number of 3-story and 6-story buildings that represent the vast majority of the existing ones and (ii) evaluating their vulnerability through three types of analyses, namely: code-type, push-over and nonlinear dynamic analysis. Given the low lateral resistance of the main frames, the cooperation of the masonry infill walls is accounted for; for each representative building, three wall densities are considered. The results of the analyses show that the buildings in question exhibit inadequate seismic behavior in most of the examined situations. In general, the relative performance is less deficient for Target Drift CP (Collapse Prevention) than for IO (Immediate Occupancy). Since these buildings are selected to be representative of the vast majority of buildings with wide beams that were constructed in Spain without accounting for any seismic consideration, our conclusions can be extrapolated to a broader scenario.

Desarrollos metodológicos y aplicaciones hacia el cálculo de la peligrosidad sísmica en el ecuador continental y estudio de riesgo sísmico en la ciudad de Quito

En el presente trabajo de tesis se desarrolla, en primer lugar, un estudio de peligrosidad sísmica en Ecuador continental, siguiendo una metodología probabilista zonificada. El estudio se plantea a escala regional y presenta como principales aportaciones: 1) la elaboración de un Estado del Arte sobre Tectónica y Geología de Ecuador, concluyendo con la identificación de las principales fuentes sísmicas; 2) La confección de un Catálogo Sísmico de proyecto, recopilando información de distintas agencias, que ha sido homogeneizado a magnitud momento, Mw, depurado de réplicas y premonitores y corregido por la falta de completitud para la estimación de tasas en diferentes rangos de magnitud; 3) la propuesta de un nueva zonificación sísmica, definiendo las zonas sismogenéticas en tres regímenes tectónicos: cortical, subducción interfase y subducción in-slab; 4) la caracterización sísmica de cada zona estimando los parámetros de recurrencia y Magnitud Máxima (Mmax), considerando para este último parámetro una distribución de valores posibles en función de la sismicidad y tectónica, tras un exhaustivo análisis de los datos existentes; 5) la generación de mapas de peligrosidad sísmica de Ecuador continental en términos de aceleración pico (PGA) y espectral SA (T= 1s) , en ambos casos para periodos de retorno (PR) de 475, 975 y 2475 años; 6) La estimación de espectros de peligrosidad uniforme (UHS) y sismos de control mediante desagregación de la peligrosidad, para PR de 475 y 2475 años en 4 capitales de provincia: Quito, Esmeraldas, Guayaquil y Loja. Una segunda parte del trabajo se destina al cálculo del riesgo sísmico en el Barrio Mariscal Sucre de Quito, lo que supone incidir ya a una escala municipal. Como principales contribuciones de este trabajo se destacan: 1) definición del escenario sísmico que más contribuye a la peligrosidad en Quito, que actuará como input de cálculo del riesgo; 2) caracterización de la acción sísmica asociada a ese escenario, incluyendo resultados de microzonación y efecto local en la zona de estudio; 3) Elaboración de una Base de Datos partiendo de información catastral e identificación de las tipologías dominantes; 4) Asignación de clases de vulnerabilidad y obtención de porcentajes de daño esperado en cada clase ante la acción sísmica definida previamente, con la consiguiente representación de mapas de vulnerabilidad y daño; 5) mapas de indicadores globales del riesgo sísmico; 6) Base de datos georreferenciada con toda la información generada en el estudio. Cabe destacar que el trabajo, aunque no formula nuevos métodos, si plantea una metodología integral de cálculo del riesgo sísmico, incorporando avances en cada fase abordada, desde la estimación de la peligrosidad o la definición de escenarios sísmicos con carácter hibrido (probabilista-determinista), hasta la asignación de vulnerabilidades y estimación de escenarios de daño. Esta tesis trata de presentar contribuciones hacia el mejor conocimiento de la peligrosidad sísmica en Ecuador y el riesgo sísmico en Quito, siendo uno de los primeros estudios de tesis que se desarrolla sobre estos temas en el país. El trabajo puede servir de ejemplo y punto de partida para estudios futuros; además de ser replicable en otras ciudades y municipios de Ecuador. -------------------- ABSTRACT: ------------------ This thesis first develops a study of seismic hazard in mainland Ecuador, following a zoned, probabilistic methodology. The study considers a regional scale and presents as main contributions: 1) The development of a State of Art on the Tectonics and Geology of Ecuador, concluding with the identification of the main seismic sources; 2) The creation of a Seismic Catalog project, collecting information from different agencies, which has been homogenized to Moment magnitude, Mw, purged from aftershocks and premonitories and corrected for the lack of completeness to estimate rates in different maggnitude ranges; 3) The proposal of a new seismic zoning, defining the seismogenic zones in three tectonic regimes: cortical, subduction interface and subduction in-slab; 4) The seismic characterization of each zone, estimating the parameters of recurrence and Maximum Magnitude (Mmax), considering the latter as a distribution of possible values, depending on the seismicity and tectonics, and after a thorough analysis of the existing data; 5) Seismic hazard maps of continental Ecuador in terms of peak ground acceleration (PGA) and spectral SA(T=1), and return periods (PR) of 475, 975 and 2475 years; 6) Uniform hazard spectra (UHS) and control earthquakes obtained by hazard disaggregation, for PR 475 and 2475 years in four provincial capitals: Quito, Esmeraldas, Guayaquil and Loja. The second section focuses on the calculation of seismic risk in the Quito Mariscal Sucre parish, which is already supposed to be influencing at a municipal level. The main contributions here are the: 1) Definition of the seismic scenario that contributes most to the hazard in Quito, which acts as an input in the risk calculation; 2) Characterization of the seismic action associated with that scenario, including results of micro-zoning and local effect in the study area; 3) Development of a database, based on cadastral data and identification of key typologies; 4) Allocation of vulnerability classes and obtaining percentages of damage expected in each class faced with the seismic action previously defined, with the consequent representation of maps of vulnerability and damage; 5) Global maps of seismic risk indicators; 6) Geo-referenced database with all the information generated in the study. It should be noted that although new methods are not prescribed, this study does set a comprehensive methodology for the calculation of seismic risk, incorporating advances in each phase approached, from the hazard estimation, or definition of seismic scenarios applying a hybrid (deterministic-probabilistic) method, to the allocation of vulnerabilities and estimation of damage scenarios. This thesis aims to present contributions leading to a better understanding of seismic hazard in Ecuador and seismic risk in Quito, and is one of the first studies in the country to develop such themes. This study can serve as an example and starting point for future studies, which could replicate this methodology in other cities and municipalities.

Controlo fuzzy semi-activo para aparelhos de amortecimento variável na protecção sísmica

Trabalho apresentado no 10º Congresso Nacional de Sismologia e Engenharia Sísmica, 20-22 abril de 2016, Ponta Delgada, Açores, Portugal

Dimensionamento de um edifício destinado a centro de dia para idosos e creche

Trabalho de Projeto para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização em Estruturas

Dimensionamento automático de pilares de betão armado aplicando o método da capacidade real

Dissertação de Mestrado, Engenharia Civil, Especialização em Estruturas, Instituto Superior de Engenharia, Universidade do Algarve, 2016

Nonlinear modelling of non-structural masonry walls under a low-intensity earthquake motion: calibration through a parametric study

This thesis aims to understand the behavior of a low-rise unreinforced masonry building (URM), the typical residential house in the Netherlands, when subjected to low-intensity earthquakes. In fact, in the last decades, the Groningen region was hit by several shallow earthquakes caused by the extraction of natural gas. In particular, the focus is addressed to the internal non-structural walls and to their interaction with the structural parts of the building. A simple and cost-efficient 2D FEM model is developed, focused on the interfaces representing mortar layers that are present between the non-structural walls and the rest of the structure. As a reference for geometries and materials, it has been taken into consideration a prototype that was built in full-scale at the EUCENTRE laboratory of Pavia (Italy). Firstly, a quasi-static analysis is performed by gradually applying a prescribed displacement on the roof floor of the structure. Sensitivity analyses are conducted on some key parameters characterizing mortar. This analysis allows for the calibration of their values and the evaluation of the reliability of the model. Successively, a transient analysis is performed to effectively subject the model to a seismic action and hence also evaluate the mechanical response of the building over time. Moreover, it was possible to compare the results of this analysis with the displacements recorded in the experimental tests by creating a model representing the entire considered structure. As a result, some conditions for the model calibration are defined. The reliability of the model is then confirmed by both the reasonable results obtained from the sensitivity analysis and the compatibility of the values obtained for the top displacement of the roof floor of the experimental test, and the same value acquired from the structural model.

Abatement of seismic hazards to lifelines : action plan /

BSSC Program on Improved Seismic Safety Provisions.

Seismic behavior of capacity designed masonry walls in low seismicity regions

Eurocode 8 representing a new generation of structural design codes in Europe defines ‎requirements for the design of buildings against earthquake action. In Central and ‎Western Europe, the newly defined earthquake zones and corresponding design ground ‎acceleration values, will lead in many cases to earthquake actions which are remarkably ‎higher than those defined so far by the design codes used until now in Central Europe. ‎ In many cases, the weak points of masonry structures during an earthquake are the corner ‎regions of the walls. Loading of masonry walls by earthquake action leads in most cases ‎to high shear forces. The corresponding bending moment in such a wall typically causes a ‎significant increase of the eccentricity of the normal force in the critical wall cross ‎section. This in turn leads ultimately to a reduction of the size of the compression zone in ‎unreinforced walls and a high concentration of normal stresses and shear stresses in the ‎corner regions. ‎ Corner-Gap-Elements, consisting of a bearing beam located underneath the wall and ‎made of a sufficiently strong material (such as reinforced concrete), reduce the effect of ‎the eccentricity of the normal force and thus restricts the pinching effect of the ‎compression zone. In fact, the deformation can be concentrated in the joint below the ‎bearing beam. According to the principles of the Capacity Design philosophy, the ‎masonry itself is protected from high stresses as a potential cause of brittle failure. ‎ Shaking table tests at the NTU Athens Earthquake Engineering Laboratory have proven ‎the effectiveness of the Corner-Gap-Element. The following presentation will cover the ‎evaluation of various experimental results as well as a numerical modeling of the ‎observed phenomena.‎

Seismic soil-interaction on earth retaining structures. Performance-based seismic design of a Retaining Wall

The design of containment walls suffering seismic loads traditionally has been realized with methods based on pseudoanalitic procedures such as Mononobe- Okabe's method, which it has led in certain occasions to insecure designs, that they have produced the ruin of many containment walls suffering the action of an earthquake. A method is proposed in this papers for the design of containment walls in different soils, suffering to the action of an earthquake, based on the Performance-Based Seismic Design.

Performance-based seismic design of a retaining wall

The design of containment walls suffering seismic loads traditionally has been realized with methods based on pseudoanalitic procedures such as Mononobe-Okabe's method, which it has led in certain occasions to insecure designs, that they have produced the ruin of many containment walls suffering the action of an earthquake. The recommendations gathered in Mononobe-Okabe's theory have been included in numerous Codes of Seismic Design. It is clear that a revision of these recommendations must be done. At present there is taking place an important review of the design methods of anti-seismic structures such as containment walls placed in an area of numerous earthquakes, by means of the introduction at the beginning of the decade of 1990 the Displacement Response Spectrum (DRS) and the Capacity Demand Diagram (CDD) that suppose an important change in the way of presenting the Elastic Response Spectrum (ERS). On the other hand in case of action of an earthquake, the dynamic characteristics of a soil have been referred traditionally to the speed of the shear waves that can be generated in a site, together with the characteristics of plasticity and damping of the soil. The Principle of the energy conservation explains why a shear upward propagating seismic wave can be amplified when travelling from a medium with high shear wave velocity (rock) to other medium with lower velocity (soil deposit), as it happened in the earthquake of Mexico of 1985. This amplification is a function of the speed gradient or of the contrast of impedances in the border of both types of mediums. A method is proposed in this paper for the design of containment walls in different soils, suffering to the action of an earthquake, based on the Performance-Based Seismic Design.